Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “defective engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Engineered U7 snRNA mediates sustained splicing correction in erythroid cells from β-thalassemia/HbE patients

Highlights: • Defect of β{sup E}-globin pre-mRNA splicing was repaired by engineered splice-switching U7 snRNA. • Splice-switching oligonucleotide sequence was identified by a two-step tiling approach. • The engineered U7 snRNA improve pathology of erythroid cells from thalassemia patients. Repair of a splicing defect of β-globin pre-mRNA harboring hemoglobin E (HbE) mutation was successfully accomplished in erythroid cells from patients with β-thalassemia/HbE disorder by a synthetic splice-switching oligonucleotide (SSO). However, its application is limited by short-term effectiveness and requirement of lifelong periodic administration of SSO, especially for chronic diseases like thalassemias. Here, we engineered lentiviral vectors that stably express U7 small nuclear RNA (U7 snRNA) carrying the splice-switching sequence of the SSO that restores correct splicing of β{sup E}-globin pre-mRNA and achieves a long-term therapeutic effect. Using a two-step tiling approach, we systematically screened U7 snRNAs carrying splice-switching SSO sequences targeted to the cryptic 5′ splice site created by HbE mutation. We tested this approach and identified the most responsive element for mediating splicing correction in engineered U7 snRNAs in HeLa-β{sup E} cell model cell line. Remarkably, the U7 snRNA lentiviral vector (U7 βE4+1) targeted to this region effectively restored the correctly-spliced β{sup E}-globin mRNA for at least 5 months. Moreover, the effects of the U7 βE4+1 snRNA lentiviral vector were also evident as upregulation of the correctly-spliced β{sup E}-globin mRNA in erythroid progenitor cells from β-thalassemia/HbE patients treated with the vector, which led to improvements of pathologies in erythroid progenitor cells from thalassemia patients. These results suggest that the splicing correction of β{sup E}-globin pre-mRNA by the engineered U7 snRNA lentiviral vector provides a promising, long-term treatment for β-thalassemia/HbE.

60 APPLIED LIFE SCIENCES↗

Exploring the eddy current excitation invariance to infer about defect characteristics

This paper explores the excitation probe excitation field invariance when the eddy current method is applied to detect, localize and characterize material defects in conductive nonmagnetic media. The cases relative to rotational symmetry in circular solenoidal probes and translation symmetry in constant field probes are presented. The experimental data shows that this theoretical treatment is useful to preview the behavior of these probes.

42 ENGINEERING↗

Optical tuning of the diamond Fermi level measured by correlated scanning probe microscopy and quantum defect spectroscopy

Quantum technologies based on quantum point defects in crystals require control over the defect charge state. Here we tune the charge state of shallow nitrogen-vacancy and silicon-vacancy centers by locally oxidizing a hydrogenated surface with moderate optical excitation and simultaneous spectral monitoring. The loss of conductivity and change in work function due to oxidation are measured in atmosphere using conductive atomic force microscopy and Kelvin probe force microscopy (KPFM). We correlate these scanning probe measurements with optical spectroscopy of the nitrogen-vacancy and silicon-vacancy centers created via implantation 15–25 nm beneath the diamond surface and annealing. The observed charge state of the defects as a function of optical exposure demonstrates that laser oxidation provides a way to precisely tune the Fermi level over a range of at least 2.00 eV. We also observe a significantly larger oxidation rate for implanted surfaces compared to unimplanted surfaces under ambient conditions. Here, combined with knowledge of the electron affinity of a surface, these results suggest KPFM is a powerful, high-spatial-resolution technique to advance surface Fermi level engineering for charge stabilization of quantum defects.

36 MATERIALS SCIENCE↗

Multidimensional Multiphysics Simulation of Nuclear Fuel Behavior

Important aspects of fuel rod behavior, for example pellet-clad mechanical interaction (PCMI), fuel fracture, oxide formation, non- axisymmetric cooling, and response to fuel manufacturing defects, are inherently multidimensional in addition to being complicated multiphysics problems. Many current modeling tools are strictly 2D axisymmetric or even 1.5D. This paper outlines the capabilities of a new fuel modeling tool able to analyze either 2D axisymmetric or fully 3D models. These capabilities include temperature-dependent thermal conductivity of fuel; swelling and densification; fuel creep; pellet fracture; fission gas release; cladding creep; irradiation growth; and gap mechanics (contact and gap heat transfer). The need for multiphysics, multidimensional modeling is then demonstrated through a discussion of results for a set of example problems. The first, a 10-pellet rodlet, demonstrates the viability of the solution method employed. This example highlights the effect of our smeared cracking model and also shows the multidimensional nature of discrete fuel pellet modeling. The second example relies on our multidimensional, multiphysics approach to analyze a missing pellet surface problem. The next example is the analysis of cesium diffusion in a TRISO fuel particle with defects. As a final example, we show a lower-length-scale simulation coupled to a continuum-scale simulation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Anisotropic structure and optical engineering of strontium titanate and zirconia responding to sequential hydrogen and helium irradiation

Unraveling the correlation between strain engineering with anisotropic optical properties via nanoscale defects gradually evolved into a strategy for fundamental studies and technological applications, yet it remains understudied in functional complex oxides compared to metals and semiconductors. Here, the methodology of strain engineering for the determination of the lattice parameters, parallel/normal to the sample surface, in the individual layers of single-crystalline superlattices is derived, which is based on analysis of high-angle X-ray diffraction measurements in combination with diffraction reciprocal space mapping. With modeling that takes into account the effect of elastic properties, two elastically anisotropic materials, SrTiO 3 and ZrO 2 , have been compared in terms of defect-induced elastic strain caused by individual and sequential H + and He 2+ irradiation. The anisotropic lattice swelling with corresponding refractive index, and obstructive behavior of elastic strain recovery are demonstrated in SrTiO 3 , while approaching strain behaviors accompanied by isotropic refractive index distribution in both orientations are confirmed in ZrO 2 . Under sequential He 2+ /H + irradiation, pre-existing He-vacancy complexes acted as vacancy traps, preferentially capturing H + clusters to induce lattice distortion and enhance absorption. Nanohardness increments (ΔH) calculated by the DBH model matched nanoindentation results, confirming that sequential irradiation generated higher indentation yield stress than individual irradiations.

Anisotropic expansion↗

Strain Field Analysis in Electronic Components by ESPI: Bad Thermal Contact and Damage Evaluation

Designing electronic components and devices is a complex task that must include also considerations about thermo-mechanical behavior of the component itself. This aspect, in fact, can affect the reliability of the device as a consequence of the thermal stresses that are introduced in the component while it is working. Stress concentration can arise, in fact, due to different thermal expansion coefficients of the materials involved. Determining the thermo-mechanical response by numerically methods is not simple and not always possible so that experimental methods are preferable. In this paper, specifically, the electronic speckle pattern interferometry technique was adopted to measure full-field strain of the component during exercise. By using an optical technique it is possible to get information about the behavior of the component without being in contact with the component itself so that the dissipation coefficient is not altered. The system was able to detect gradients of deformation in the component itself connected to the different distribution of internal current in the component. Moreover, it was observed, that the presence of bad thermal contact between the package and the heat sink can be revealed because it results in a different thermos-mechanical behavior of the component. Finally, a critical defect was introduced in the component and it was observed the way the presence of damage affects the in-plane displacement of the component. Very huge differences were observed leading to the consideration that this kind of approach could be conveniently adopted also as a damage detection tool.

42 ENGINEERING↗

Kinetic approach to defect reduction in directed self-assembly

As a potential solution to next-generation nanolithography, directed self-assembly (DSA) of block copolymers (BCPs) is still restrained in high-volume manufacturing primarily due to its defectivity issue. Though defects possess greater free energies than aligned morphologies and are highly energetically unfavorable, they can be kinetically trapped by the energy barriers and persist for a long time during annealing. Therefore, understanding the kinetics of defect annihilation is crucial in revealing the mechanism of defect formation and in further reducing defectivity in DSA. We focus on two types of predominant defects in DSA- dislocation and bridge. Furthermore, a kinetic model of each defect type is developed through statistical analysis of experimental data, providing insight into possible approaches of further defect reduction. We also investigate the impact of annealing temperature and film thickness on annihilation kinetics and discuss the reasons behind the observed results. By simply optimizing annealing conditions and film thickness, we have successfully reduced the total defect density by 1 order of magnitude. Though these findings are based on polystyrene-b-poly(methyl methacrylate) (PS-b-PMMA), we anticipate they could be readily applied to other BCP platforms as well.

42 ENGINEERING↗

Fast Organic Vapor Phase Deposition of Thin Films in Light-Emitting Diodes

Fast deposition of thin films is essential for achieving low-cost, high throughput phosphorescent organic light emitting diode (PHOLED) production. In this work, we demonstrate rapid and uniform growth of semiconductor thin films by organic vapor phase deposition (OVPD). A green PHOLED comprising an emission layer (EML) grown at 50 Å/s with bis[2-(2-pyridinyl-N)phenyl-C](acetylacetonato)iridium(III) (Ir(ppy)2(acac)) doped into 4,4 bis(N-carbazolyl)-1,1zolylld (CBP) exhibits a maximum external quantum efficiency of 20 ± 1%. The morphology, charge transport properties, and radiative efficiency under optical and electrical excitation of the PHOLED EML are investigated as functions of the deposition rate via both experimental and theoretical approaches. The EML shows no evidence for gas phase nucleation of the organic molecules at deposition rates as high as 50 Å/s. However, the roll-off in quantum efficiency at high current progressively increases with deposition rate due to enhanced triplet-polaron annihilation. The roll-off results from accumulation of stress within the PHOLED EML that generates a high density of defect states. Here, the defects, in turn, act as recombination sites for triplets and hole polarons, leading to enhanced triplet-polaron annihilation at high current. We introduce a void nucleation model to describe the film morphology evolution that is observed using electron microscopy.

42 ENGINEERING↗

Investigation of the Possibility of Use of Vibroacoustical Signals for Purposes of Diagnostics in Aeronautical Engineering

The application of vibroacoustic techniques for diagnosing aircraft engine malfunctions is discussed. An experiment was conducted to determine the defects introduced by the nature of change in the amplitude-frequency characteristics of the noises and vibrations of an aircraft jet engine. The manner in which the defects were simulated is explained. The test equipment used during the experiment is identified. The results of the amplitude-frequency characteristics investigation are summarized to show optimum location of the microphone pick-up to record the acoustic data.

A R Press↗

Significant Reduction of Lattice Thermal Conductivity by the Electron-Phonon Interaction in Silicon with High Carrier Concentrations: A First-Principles Study

The electron-phonon interaction is well known to create major resistance to electron transport in metals and semiconductors, whereas fewer studies are directed to its effect on phonon transport, especially in semiconductors. Herein we calculate the phonon lifetimes due to scattering with electrons (or holes), combine them with the intrinsic lifetimes due to the anharmonic phonon-phonon interaction, all from first principles, and evaluate the effect of the electron-phonon interaction on the lattice thermal conductivity of silicon. Unexpectedly, we find a significant reduction of the lattice thermal conductivity at room temperature as the carrier concentration goes above 1019 cm –3 (the reduction reaches up to 45% in p-type silicon at around 1021 cm –3 ), a range of great technological relevance to thermoelectric materials.

42 ENGINEERING↗

Towards Quantitative Inference of Nanoscale Defects in Irradiated Metals and Alloys

Quantifying the population of nanoscale defects that are formed in metals and alloys exposed to extreme radiation environments remains a pressing challenge in materials science. These defects both fundamentally alter material properties and seed long-timescale performance degradation, which often limits the lifespan of engineering systems. Unlike ceramic and semiconducting materials, these defects in metals and alloys are not spectroscopically active, forcing characterization to rely on indirect measurements from which the distribution of nanoscale defects may be inferred. In this mini-review, different experimental methodologies which have been employed for defect inference are highlighted to capture the current state of the art. Future directions in this area are proposed, which, by combining data streams from multiple and complementary characterization methods in concert with multi-scale modeling and simulation, will enable the ultimate goal of quantifying the full spectrum of defects in irradiated metals and alloys.

Hirst, Charles A.↗

Enamel Matrix Derivative has No Effect on the Chondrogenic Differentiation of Mesenchymal Stem Cells

Background: Treatment of large bone defects due to trauma, tumor resection, or congenital abnormalities is challenging. Bone tissue engineering using mesenchymal stem cells (MSCs) represents a promising treatment option. However, the quantity and quality of engineered bone tissue are not sufficient to fill large bone defects. The aim of this study was to determine if the addition of enamel matrix derivative (EMD) improves in vitro chondrogenic priming of MSCs to ultimately improve in vivo MSC mediated endochondral bone formation. Methods: MSCs were chondrogenically differentiated in 2.0 × 10{sup 5} cell pellets in medium supplemented with TGFβ3 in the absence or presence of 1, 10, or 100 μg/mL EMD. Samples were analyzed for gene expression of RUNX2, Col II, Col X, and Sox9. Protein and glycoaminoglycan (GAG) production were also investigated via DMB assays, histology, and immunohistochemistry. Osteogenic and adipogenic differentiation capacity were also assessed. Results: The addition of EMD did not negatively affect chondrogenic differentiation of adult human MSCs. EMD did not appear to alter GAG production or expression of chondrogenic genes. Osteogenic and adipogenic differentiation were also unaffected though a trend toward decreased adipogenic gene expression was observed. Conclusion: EMD does not affect chondrogenic differentiation of adult human MSCs. As such the use of EMD in combination with chondrogenically primed MSCs for periodontal bone tissue repair is unlikely to have negative effects on MSC differentiation.

60 APPLIED LIFE SCIENCES↗

Defects and anomalies in powder bed fusion metal additive manufacturing

Metal additive manufacturing is a disruptive technology that is revolutionizing the manufacturing industry. Despite its unrivaled capability for directly fabricating metal parts with complex geometries, the wide realization of the technology is currently limited by microstructural defects and anomalies, which could significantly degrade the structural integrity and service performance of the product. Accurate detection, characterization, and prediction of these defects and anomalies have an important and immediate impact in manufacturing fully-dense and defect-free builds. As such, this review seeks to elucidate common defects/anomalies and their formation mechanisms in powder bed fusion additive manufacturing processes. They could arise from raw materials, processing conditions, and post-processing. While defects/anomalies in laser welding have been studied extensively, their formation and evolution remain unclear. Additionally, the existence of powder in powder bed fusion techniques may generate new types of defects, e.g., porosity transferring from powder to builds. Practical strategies to mitigate defects are also addressed through fundamental understanding of their formation. Such explorations enable the validation and calibration of models and ease the process qualification without costly trial-and-error experimentation.

42 ENGINEERING↗

The HMDS Coating Flaw Removal Tool

In many high energy laser systems, optics with HMDS sol gel antireflective coatings are placed in close proximity to each other making them particularly susceptible to certain types of strong optical interactions. During the coating process, halo shaped coating flaws develop around surface digs and particles. Depending on the shape and size of the flaw, the extent of laser light intensity modulation and consequent probability of damaging downstream optics may increase significantly. To prevent these defects from causing damage, a coating flaw removal tool was developed that deploys a spot of decane with a syringe and dissolves away the coating flaw. The residual liquid is evacuated leaving an uncoated circular spot approximately 1mm in diameter. The resulting uncoated region causes little light intensity modulation and thus has a low probability of causing damage in optics downstream from the mitigated flaw site.

42 ENGINEERING↗

Self-compensation induced vacancies for significant phonon scattering in InSb

Here, phonon scattering by point defects via mass differences and strain fluctuations could effectively reduce the lattice thermal conductivity. The atomic mass difference can be maximized by introducing the vacancies thus leading to a significant phonon scattering. Usually, the vacancies are introduced by tuning the stoichiometry or forming solid solution with certain compound that contains intrinsically high concentration of vacancies. In this work, we demonstrate that vacancies can be effectively induced by the self-compensation effect via chemical doping. Indium (In) vacancies in InSb were induced by Te-doping and a substantial reduction in thermal conductivity was observed. Room temperature lattice thermal conductivity of the melted and then hot-pressed InSb (without In vacancies) is ~ 14.5 W m –1 K –1 but only ~ 3.8 W m –1 K –1 for InSb 0.96 Te 0.04 (with In vacancies), a reduction of ~ 74%. The advantage of using this strategy for phonon engineering lies in the fact that a substantial reduction in thermal conductivity can be achieved even when the dopant concentration is rather low. Since the self-compensation effect is widely observed in different compounds, it indicates that the vacancy engineering strategy used here is also applicable to a variety of other materials to effectively reduce the lattice thermal conductivity.

36 MATERIALS SCIENCE↗

Cross-Cutting Metrology Tools for In Operando Characterization of Carrier Dynamics in Photovoltaic Devices (Final Technical Report)

Understanding the nature of recombination and its dependence on defects and interfaces is essential for engineering materials and contacts for higher V oc and photovoltaic (PV) efficiency. Time-resolved photoluminescence (TRPL) has conventionally been used to evaluate recombination, but not all materials are strongly emissive or otherwise suitable. Time-resolved terahertz spectroscopy is a pump – probe method that presents valuable complementary information, wherein an optical pump pulse photoexcites carriers within the absorber and the transient photoconductivity is probed with a terahertz pulse. Until now, experimental constraints have prohibited the use of terahertz probes to interrogate full device stacks, and measurements were instead made on exfoliated films or films grown on unconventional substrates. However, interfaces are critical to the behavior of photoexcited carriers in solar cells, and the substrates themselves often influence the film growth and bulk properties. Therefore, it is important to probe the behavior of PV absorbers as close as possible to their normal operating conditions. Here we have developed cross-cutting metrology that enable in operando characterization of carrier dynamics and recombination mechanisms in working PV devices. Through a combination of complementary non-contact TRTS and TRPL experiments and modeling, we have obtained key parameters including photoexcited carrier bulk lifetime and interface and back surface recombination velocities with greater precision and accuracy than can be achieved with conventional TRPL alone. By varying pulsed photoexcitation conditions, the contributions of interface and bulk recombination mechanisms can be determined. We have developed and refined this characterization approach by investigating CdTe PVs, which is a well-established technology but with significant margin for further improvements in efficiency. Results were published in Journal of Applied Physics (DOI: 10.1063/5.0064730) and Proceedings of the IEEE PVSC (DOI: 10.1109/PVSC43889.2021.9518559). After validating the approach, we have applied it to correlate recombination rates to processing conditions and material properties, including composition and defects as well as interfaces and surface treatments. Such feedback can inform processing and design choices to enable higher PV efficiency, not only for CdTe, but also CdSe x Te 1-x , CIGS, perovskites, kesterites, and future technologies. A perspective on predicting solar cell performance from terahertz spectroscopy was published in Advanced Energy Materials (DOI: 10.1002/aenm.202102776). The cross-cutting metrology tools developed here will enable determination of the locus and mechanism of performance-limiting recombination in thin film PV devices. This feedback can guide the engineering of PV devices with higher V oc and efficiency, thereby leading to reductions in levelized cost of electricity to meet the SunShot 2030 target of $0.03/kWh for utility-scale PV. Lower costs will enable rapid expansion of renewable electricity generation that is nearly free of carbon emissions. Reducing carbon emissions of the electricity sector is one of the most important solutions to climate change. The project’s specific focus on CdTe PV can benefit First Solar, the US company that is the global leader in CdTe technology, through both technology and workforce development.

14 SOLAR ENERGY↗

Design of Experiments to Determine Causes of Flex Cable Solder Wicking, Discoloration and Hole Location Defects

Design of Experiments (DoE) were developed and performed in an effort to discover and resolve the causes of three different manufacturing issues; large panel voids after Hot Air Solder Leveling (HASL), cable hole locations out of tolerance after lamination and delamination/solder wicking around flat flex cable circuit lands after HASL. Results from a first DoE indicated large panel voids could be eliminated by removing the pre-HASL cleaning. It also revealed eliminating the pre-HASL bake would not be detrimental when using a hard press pad lamination stackup. A second DoE indicated a reduction in hard press pad stackup lamination pressure reduced panel stretch in the y axis approximately 70%. A third DoE illustrated increasing the pre-HASL bake temperature could reduce delamination/solder wicking when using a soft press pad lamination stackup.

42 ENGINEERING↗

A first-principles investigation of point defect structure and energetics in ThO 2

The structure and energetics of charged point defects in thorium dioxide (ThO 2 ) have been investigated using the density functional theory (DFT) and phonon simulations. DFT simulations were performed under both zero-pressure and constant volume conditions. Termed as the free volume change of the point defects, the change in volume of the supercell has been computed in the zero-pressure case. Supercell expansion was observed with the increase of the (nominal) charge state of anion (O) interstitials and cation (Th) vacancies from neutral to its maximum. On the contrary, contraction of the supercell has been observed with anion vacancies and cation interstitials as the defect charge increases. The supercell volume change with respect to the charge state has been correlated with the resulting defect energetics. It has been observed that, as the defect charge increased, the internal energy and entropy of defect formation of the cation vacancies and anion interstitials were found to increase, while that of the cation interstitials and anion vacancies decreased. Here, the temperature dependence of internal energy and entropy has also been examined. It was found that, as the temperature increases, the internal energies of the formation of cation vacancies and anion interstitials decrease, while those of the cation interstitials and anion vacancies increase. An opposite observation is seen for the entropies of formation defects when above room temperatures.

42 ENGINEERING↗