Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data reporting formats”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Search for cold gas in clusters with and without cooling flows

The dominant galaxy in each of approx. 40 clusters was studied using co-added Infrared Astronomy Satellite (IRAS) survey data, and 11 of these galaxies were observed for CO (J=1 to 0) emission with the 12 m telescope at Kitt Peak. Half of the galaxies in the sample are in clusters reported to have cooling flows while the other half are not. Six of the galaxies appear to have been detected by IRAS at fairly low flux levels, in addition to one previously known strong detection; all seven have reported cooling flows. No detectable CO emission (to 2 to 3 mK) was found in any of the 11 galaxies observed. Assuming accretion rates of approx. 100 Solar Mass yr(-1), the star formation rates and efficiencies in these galaxies must be quite high in order to render the CO undetectable. At the same time, the infrared luminosities of these galaxies is unremarkable, suggesting that the correlation between star formation efficiency and infrared luminosity found for spirals may not hold for cooling flows.

Grabelsky, D. A.↗
NASA NTRS1994

Determining structure in molecular clouds

We descibe an automatic, objective routine for analyzing the clumpy structure in a spectral line position-position-velocity data cube. The algorithm works by first contouring the data at a multiple of the rms noise of the observations, then searches for peaks of emission which locate the clumps, and then follows them down to lower intensities. No a proiri clump profile is assumed. By creating simulated data, we test the performance of the algorithm and show that a contour map most accurately depicts internal structure at a contouring interval equal to twice the rms noise of the map. Blending of clump emission leads to small errors in mass and size determinations and in severe cases can result in a number of clumps being misidentified as a single unit, flattening the measured clump mass spectrum. The algorithm is applied to two real data sets as an example of its use. The Rosette molecular cloud is a 'typical' star-forming cloud, but in the Maddalena molecular cloud high-mass star formation is completely absent. Comparison of the two clump lists generated by the algorithm show that on a one-to-one basis the clumps in the star-forming cloud have higher peak temperatures, higher average densities, and are more gravitationally bound than in the non-star-forming cloud. Collective properties of the clumps, such as temperature-size-line-width-mass relations appear very similar, however. Contrary to the initial results reported in a previous paper (Williams & Blitz 1993), we find that the current, more thoroughly tes ted analysis finds no significant difference in the clump mass spectrum of the two clouds.

Williams, Jonathan P.↗
NASA NTRS1995

The Atmospheric Data Acquisition And Interpolation Process For Center-TRACON Automation System

The Center-TRACON Automation System (CTAS), an advanced new air traffic automation program, requires knowledge of spatial and temporal atmospheric conditions such as the wind speed and direction, the temperature and the pressure in order to accurately predict aircraft trajectories. Real-time atmospheric data is available in a grid format so that CTAS must interpolate between the grid points to estimate the atmospheric parameter values. The atmospheric data grid is generally not in the same coordinate system as that used by CTAS so that coordinate conversions are required. Both the interpolation and coordinate conversion processes can introduce errors into the atmospheric data and reduce interpolation accuracy. More accurate algorithms may be computationally expensive or may require a prohibitively large amount of data storage capacity so that trade-offs must be made between accuracy and the available computational and data storage resources. The atmospheric data acquisition and processing employed by CTAS will be outlined in this report. The effects of atmospheric data processing on CTAS trajectory prediction will also be analyzed, and several examples of the trajectory prediction process will be given.

Jardin, M. R.↗
NASA NTRS2005

Surface and Internal Structure of Pristine Presolar Silicon Carbide

Silicon carbide is the most well-studied type of presolar grain. Isotope measurements of thousands [1,2] and structural data from over 500 individual grains have been reported [3]. The isotope data indicate that approximately 98% originated in asymptotic giant branch stars and 2% in supernovae. Although tens of different polytypes of SiC are known to form synthetically, only two polytypes have been reported for presolar grains. Daulton et al. [3] found that for SiC grains isolated from Murchison by acid treatments, 79.4% are 3C cubic beta-SiC, 2.7% are 2H hexagonal alpha-SiC, 17.1% are intergrowths of and , and 0.9% are heavily disordered. They report that the occurrence of only the and polytypes is consistent with the observed range of condensation temperatures of circumstellar dust for carbon stars. Further constraint on the formation and subsequent alteration of the grains can be obtained from studies of the surfaces and interior structure of grains in pristine form, i.e., prepared without acid treatments [4,5]. The acid treatments remove surface coatings, produce etch pits around defect sites and could remove some subgrains. Surface oxides have been predicted by theoretical modeling as a survival mechanism for SiC grains exposed to the hot oxidizing solar nebula [6]. Scanning electron microscopy studies of pristine SiC shows some evidence for the existence of oxide and organic coatings [4]. We report herein on transmission electron microscopy studies of the surface and internal structure of two pristine SiC grains, including definitive evidence of an oxide rim on one grain, and the presence of internal TiC and AlN grains.

Stroud, Rhonda, M.↗
NASA NTRS2014

Series-Bosch Technology for Oxygen Recovery During Lunar or Martian Surface Missions

Long‐duration surface missions to the Moon or Mars will require life support systems that maximize resource recovery to minimize resupply from Earth. To address this need, NASA previously proposed a Series‐Bosch (S‐Bosch) oxygen recovery system, based on the Bosch process, which can theoretically recover 100% of the oxygen from metabolic carbon dioxide. Bosch processes have the added benefits of the potential to recover oxygen from atmospheric carbon dioxide and the use of regolith materials as catalysts, thereby eliminating the need for catalyst resupply from Earth. In 2012, NASA completed an initial design for an S‐Bosch development test stand that incorporates two catalytic reactors in series including a Reverse Water‐Gas Shift (RWGS) Reactor and a Carbon Formation Reactor (CFR). In 2013, fabrication of system components, with the exception of a CFR, and assembly of the test stand was initiated. Stand‐alone testing of the RWGS reactor was completed to compare performance with design models. Continued testing of Lunar and Martian regolith simulants provided sufficient data to design a CFR intended to utilize these materials as catalysts. Finally, a study was conducted to explore the possibility of producing bricks from spend regolith catalysts. The results of initial demonstration testing of the RWGS reactor, results of continued catalyst performance testing of regolith simulants, and results of brick material properties testing are reported. Additionally, design considerations for a regolith‐based CFR are discussed.

Abney, Morgan B.↗
NASA NTRS1999

An Acoustic Charge Transport Imager for High Definition Television

This project, over its term, included funding to a variety of companies and organizations. In addition to Georgia Tech these included Florida Atlantic University with Dr. William E. Glenn as the P.I., Kodak with Mr. Mike Richardson as the P.I. and M.I.T./Polaroid with Dr. Richard Solomon as the P.I. The focus of the work conducted by these organizations was the development of camera hardware for High Definition Television (HDTV). The focus of the research at Georgia Tech was the development of new semiconductor technology to achieve a next generation solid state imager chip that would operate at a high frame rate (I 70 frames per second), operate at low light levels (via the use of avalanche photodiodes as the detector element) and contain 2 million pixels. The actual cost required to create this new semiconductor technology was probably at least 5 or 6 times the investment made under this program and hence we fell short of achieving this rather grand goal. We did, however, produce a number of spin-off technologies as a result of our efforts. These include, among others, improved avalanche photodiode structures, significant advancement of the state of understanding of ZnO/GaAs structures and significant contributions to the analysis of general GaAs semiconductor devices and the design of Surface Acoustic Wave resonator filters for wireless communication. More of these will be described in the report. The work conducted at the partner sites resulted in the development of 4 prototype HDTV cameras. The HDTV camera developed by Kodak uses the Kodak KAI-2091M high- definition monochrome image sensor. This progressively-scanned charge-coupled device (CCD) can operate at video frame rates and has 9 gm square pixels. The photosensitive area has a 16:9 aspect ratio and is consistent with the "Common Image Format" (CIF). It features an active image area of 1928 horizontal by 1084 vertical pixels and has a 55% fill factor. The camera is designed to operate in continuous mode with an output data rate of 5MHz, which gives a maximum frame rate of 4 frames per second. The MIT/Polaroid group developed two cameras under this program. The cameras have effectively four times the current video spatial resolution and at 60 frames per second are double the normal video frame rate.

Hunt, William D.↗
NASA NTRS2003

The Effect of Simulated Microgravity Environment of RWV Bioreactors on Surface Reactions and Adsorption of Serum Proteins on Bone-bioactive Microcarriers

Biomimetically modified bioactive materials with bone-like surface properties are attractive candidates for use as microcarriers for 3-D bone-like tissue engineering under simulated microgravity conditions of NASA designed rotating wall vessel (RWV) bioreactors. The simulated microgravity environment is attainable under suitable parametric conditions of the RWV bioreactors. Ca-P containing bioactive glass (BG), whose stimulatory effect on bone cell function had been previously demonstrated, was used in the present study. BG surface modification via reactions in solution, resulting formation of bone-like minerals at the surface and adsorption of serum proteins is critical for obtaining the stimulatory effect. In this paper, we report on the major effects of simulated microgravity conditions of the RWV on the BG reactions surface reactions and protein adsorption in physiological solutions. Control tests at normal gravity were conducted at static and dynamic conditions. The study revealed that simulated microgravity remarkably enhanced reactions involved in the BG surface modification, including BG dissolution, formation of bone-like minerals at the surface and adsorption of serum proteins. Simultaneously, numerical models were developed to simulate the mass transport of chemical species to and from the BG surface under normal gravity and simulated microgravity conditions. The numerical results showed an excellent agreement with the experimental data at both testing conditions.

Radin, Shula↗
NASA NTRS2009

Volcanism on Io: Insights from Global Geologic Mapping

We are preparing a new global geo-logic map of Jupiter s volcanic moon, Io. Here we report the type of data that are now available from our global mapping efforts, and how these data can be used to investigate questions regarding the volcano-tectonic evolution of Io. We are using the new map to investigate several specific questions about the geologic evolution of Io that previously could not be well addressed, including (for example) a comparison of the areas vs. the heights of Ionian mountains to assess their stability and evolution (Fig. 1). The area-height relationships of Io s visible mountains show the low abundance and low relief of volcanic mountains (tholi) relative to tectonic mountains, consistent with formation from low-viscosity lavas less likely to build steep edifices. Mottled mountains are generally less high than lineated mountains, consistent with a degradational formation.

Williams, D. A.↗
NASA NTRS2012

Comparisons of Mineralogy of Lunar Meteorites Possibly from the Farside and The Kaguya Remote Sensing Data to Reconstruct the Earliest Anorthositic Crust of the Moon

Ohtake et al. [1] observed by the Kaguya multiband imager and spectral profiler anorthosites composed of nearly pure anorthite (PAN) at numerous locations in the farside highlands. Based on the Th map made by the GRS group of the Kaguya mission, Kobayashi et al. [2] showed that the lowest Th region in the lunar farside occurs near the equatorial region and noted that the regions well correspond to the lunar highest region and the thickest crust region recently measured by Kaguya mission [3,4]. Such remote sensing data have been interpreted in terms of mineralogical studies of lunar meteorites of the Dhofar 489 group [5,6] (e.g., Dhofar 489, 908, and 307) and Yamato (Y-) 86032 [7], all possibly from the farside highlands. Although the presence of magnesian anorthosites in the Dhofar 489 group has been reported, we have not encountered large clast clearly identifiable as PAN. In this study, we investigated mineralogy and textures of large clasts of nearly pure anorthosites recognized in Dhofar 911 and the d2 clast in Dhofar 489 [8]. The d2 clast is the largest white anorthosite clast in Dhofar 489, but its mineralogy has not been investigated at that time. The low bulk FeO concentrations suggests that the d2 clast may be the pure anorthosite with very low abundance of mafic silicates. In conjunction with all data of the Dhofar 489 group including Dhofar 489, 908, 309 and 307, we propose a model of formation of the farside crust.

Takeda, H.↗
NASA NTRS2014

Series-Bosch Technology for Oxygen Recovery During Lunar or Martian Surface Missions

Long-duration surface missions to the Moon or Mars will require life support systems that maximize resource recovery to minimize resupply from Earth. To address this need, NASA previously proposed a Series-Bosch (S-Bosch) oxygen recovery system, based on the Bosch process, which can theoretically recover 100% of the oxygen from metabolic carbon dioxide. Bosch processes have the added benefits of the potential to recover oxygen from atmospheric carbon dioxide and the use of regolith materials as catalysts, thereby eliminating the need for catalyst resupply from Earth. In 2012, NASA completed an initial design for an S-Bosch development test stand that incorporates two catalytic reactors in series including a Reverse Water-Gas Shift (RWGS) Reactor and a Carbon Formation Reactor (CFR). In 2013, fabrication of system components, with the exception of a CFR, and assembly of the test stand was initiated. Stand-alone testing of the RWGS reactor was completed to compare performance with design models. Continued testing of Lunar and Martian regolith simulants provided sufficient data to design a CFR intended to utilize these materials as catalysts. Finally, a study was conducted to explore the possibility of producing bricks from spent regolith catalysts. The results of initial demonstration testing of the RWGS reactor, results of continued catalyst performance testing of regolith simulants, and results of brick material properties testing are reported. Additionally, design considerations for a regolith-based CFR are discussed.

Abney, Morgan B.↗
NASA NTRSDate not supplied

Modeling Water-Rock Reactions Beneath the Greenheugh Pediment, Gale Crater, Mars

The Mars Science Laboratory Curiosity rover has been exploring the clay rich Glen Torridon unit in Gale crater since sol 2300 of the mission [1]. As identified in orbital data [2], this clay rich area [3] in the Murray formation is overlain with the Greenheugh Pediment unit to the south, which is part of the Stimson Formation [4]. Curiosity acquired the drill sample Hutton in the Upper Murray formation 2 – 3 meters below the Greenheugh Pediment [5,6]. This study uses thermochemical modelling to investigate the hypothesis for alteration in the Murray formation below the Greenheugh Pediment. Specifically, if the contact between the Greenheugh Pediment and Murray sediments was a conduit for diagenetic fluids (a low water/rock scenario) or if subaerial weathering altered the Murray sediments before cementation began (a high water/rock scenario) [6]. Here, we report on preliminary modeling where we have reacted the chemical composition for the Hutton drill sample with Gale Portage Water (GPW) at 25 °C, 50 °C and 200 °C, for 10% Fe3+/Fetot of the host rock.

SMR Turner↗
NASA NTRS2005

A Perfect View of Vesta: Creating Pointing Observations for the Dawn Spacecraft on Asteroid 4 Vesta

The Dawn spacecraft has a timely and clever assignment in store. It will take a close look at two intact survivors from the dawn of the solar system (asteroids 4 Vesta and 1 Ceres) to understand more about solar system origin and evolution. To optimize science return, Dawn must make carefully designed observations on approach and in survey orbit, high altitude mapping orbit, and low altitude mapping orbit at each body. In this report, observations outlined in the science plan are modeled using the science opportunity analyzer program for the Vesta encounter. Specifically, I encoded Dawn's flight rules into the program, modeled pointing profiles of the optical instruments (framing camera, visible infrared spectrometer) and mapped their fields of view onto Vesta's surface. Visualization of coverage will provide the science team with information necessary to assess feasibility of alternative observation plans. Dawn launches in summer 2006 and ends its journey in 2016. Instrument observations on Vesta in 2011 will supply detailed information about Vesta's surface and internal structure. These data will be used to analyze the formation and history of the protoplanet and, therefore, complete an important step in understanding the development of our solar system.

Hay, Katrina M.↗
NASA NTRSDate not supplied

Hematite Formation and Growth in Gale Crater Seen Through MSL Chemin X-Ray Diffraction Data

For more than 10 Earth years, the Mars Science Laboratory (MSL) Curiosity rover has been studying modern sediments and ancient sedimentary rocks deposited by lacustrine, fluvial, deltaic, and eolian processes in Gale crater. The mineral and X-ray amorphous abundances in rocks and sediments have been quantified via X-ray diffraction (XRD) data from the CheMin instrument. The received data demonstrate significant mineralogical variations within the stratigraphy, including changes in the type and abundances of Fe-oxides/oxyhydroxides silica polymorphs, phyllosilicates, and sulfate minerals. Characterizing Fe-oxides/oxyhydroxide minerals in Gale crater is especially important for constraining past aqueous environments because their formation depends on a variety of conditions, including pH, Eh, temperature, and salinity. Hematite, magnetite, goethite, and akaganeite have been identified by CheMin in different portions of the stratigraphic section. Hematite is the most prevalent Fe-bearing oxide mineral and has been detected (>1 wt.%) in 34 of the studied 36 drill targets. Variations in hematite crystallite size were reported in association with Vera Rubin ridge, which has a strong hematite signature in orbital reflectance spectroscopy. Here, we calculate hematite crystallite sizes and shapes for the entire stratigraphic section to date, to characterize trends and evaluate the processes by which hematite formed and transformed in Gale crater.

M. Szczerba↗
NASA NTRS2023

Distributions of Mesoscale Periodic Structures in the Elemental and Ionic Composition of the Solar Wind

Multiple statistical and event studies based on in situ observations have shown that the solar wind contains mesoscale (∼ 100 – 10,000 Mm) periodic structures in the proton number density. Remote observations of such structures and event studies of concurrent variations in composition have demonstrated that they can form in the solar atmosphere and be preserved while advecting outwards through the heliosphere. Viall, Kepko, and Spence (J. Geophys. Res. (Space Phys.) 113, A07101, 2008; J. Geophys. Res. (Space Phys.) 114, A01201, 2009) and Kepko, Viall, and Wolfinger (J. Geophys. Res. (Space Phys.) 125(8), e28037, 2020) have reported that periodic proton density structures preferentially occur at specific radial length scales and have published their distributions from Wind measurements near L1. Here, we conduct a statistical study of 14 years (1998 – 2011) of 12-minute composition data measured by the Solar Wind Ion Composition Spectrometer instrument aboard the Advanced Composition Explorer spacecraft. We found that the elemental and ionic composition also contain statistically significant mesoscale periodic structures and, for the first time, present occurrence distributions for elemental abundance ratios with low, intermediate, and high first ionization potentials as well as for key solar wind charge states. These distributions set important constraints on solar wind formation in general and the formation of periodic mesoscale solar wind structures specifically, as the elemental and ionic composition are known to be determined at the Sun and to not evolve during advection.

Solar wind↗
NASA NTRS2021

Hydrothermal History of (162173) Ryugu’s Parent Body Inferred from Remote-Sensing Data

Small rubble pile asteroids record the thermal evolution of their much larger parent bodies. However, recent space weathering and/or solar heating create ambiguities between the uppermost layer observable by remote-sensing and the pristine material from the parent body. Hayabusa2 remote-sensing observations find that on the asteroid (162173) Ryugu both north and south pole regions preserve the least space-weathered material, which is spectrally blue carbonaceous chondritic material with a 0 – 3% deep 0.7-μm band absorption, indicative of Fe-bearing phyllosilicates . We report that spectrally blue Ryugu’s parent body experienced intensive aqueous alteration and subsequent thermal metamorphism at 570 – 670 K (300 – 400 ˚C), suggesting that Ryugu’s parent body was heated by radioactive decay of short-lived radionuclides possibly because of its early formation 2-2.5 Ma. The samples being brought to Earth by Hayabusa2 will give us our first insights into this epoch in solar system history. Moreover, we found the NUV-VIS spectral similarity between Ryugu and Polana–Eulalia family members, suggesting plausible origin from inner main belt predicted by the dynamical simulation.

Eri Tatsumi↗
NASA NTRS1990

Summary of Sonic Boom Rise Times Observed During FAA Community Response Studies over a 6-Month Period in the Oklahoma City Area

The sonic boom signature data acquired from about 1225 supersonic flights, over a 6-month period in 1964 in the Oklahoma City area, was enhanced with the addition of data relating to rise times and total signature duration. These later parameters, not available at the time of publication of the original report on the Oklahoma City sonic boom exposures, are listed in tabular form along with overpressure, positive impulse, positive duration, and waveform category. Airplane operating information along with the surface weather observations are also included. Sonic boom rise times include readings to the 1/2, 3/4, and maximum overpressure values. Rise time relative probabilities for various lateral locations from the ground track of 0, 5, and 10 miles are presented along with the variation of rise times with flight altitude. The tabulated signature data, along with corresponding airplane operating conditions and surface and upper level atmospheric information, are also available on electronic files to provide it in the format for more efficient and effective utilization.

Maglieri, Domenic J.↗
NASA NTRS1996

Experimental Reacting Hydrogen Shear Layer Data at High Subsonic Mach Number

The flow in a planar shear layer of hydrogen reacting with hot air was measured with a two-component laser Doppler velocimeter (LDV) system, a schlieren system, and OH fluorescence imaging. It was compared with a similar air-to-air case without combustion. The high-speed stream's flow speed was about 390 m/s, or Mach 0.71, and the flow speed ratio was 0.34. The results showed that a shear layer with reaction grows faster than one without; both cases are within the range of data scatter presented by the established data base. The coupling between the streamwise and the cross-stream turbulence components inside the shear layers was low, and reaction only increased it slightly. However, the shear layer shifted laterally into the lower speed fuel stream, and a more organized pattern of Reynolds stress was present in the reaction shear layer, likely as a result of the formation of a larger scale structure associated with shear layer corrugation from heat release. Dynamic pressure measurements suggest that coherent flow perturbations existed inside the shear layer and that this flow became more chaotic as the flow advected downstream. Velocity and thermal variable values are listed in this report for a computational fluid dynamics (CFD) benchmark.

Chang, C. T.↗
NASA NTRS1998

WFPC2 Observations of Star Clusters in the Magellanic Clouds: The Oldest Star Clusters in the Small Magellanic Cloud - Report 2

We present our analysis of archival Hubble Space Telescope Wide Field Planetary Camera 2 (WFPC2) observations in F45OW ( approximately B) and F555W (approximately V) of the intermediate-age populous star clusters NGC 121, NGC 339, NGC 361, NGC 416, and Kron 3 in the Small Magellanic Cloud. We use published photometry of two other SMC populous star clusters, Lindsay 1 and Lindsay 113, to investigate the age sequence of these seven populous star clusters in order to improve our understanding of the formation chronology of the SMC. We analyzed the V vs B-V and M(sub V) vs (B-V)(sub 0) color-magnitude diagrams of these populous Small Magellanic Cloud star clusters using a variety of techniques and determined their ages, metallicities, and reddenings. These new data enable us to improve the age-metallicity relation of star clusters in the Small Magellanic Cloud. In particular, we find that a closed-box continuous star-formation model does not reproduce the age-metallicity relation adequately. However, a theoretical model punctuated by bursts of star formation is in better agreement with the observational data presented herein.

Mighell, Kenneth J.↗