Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “current generator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Observations of hot DA white dwarfs

Observations of the hottest white dwarfs offer the opportunity to study the earliest stages of degenerate evolution. For those white dwarfs having pure or nearly pure hydrogen photosphere it is now possible with the current generation of high gravity model atmospheres to achieve substantial refinements in the estimation of atmospheric parameters, such as effective temperature, gravity and trace elements abundance. Such improvements can in turm lead to a clearer picture of DA cooling have a significant impact on the interpretation of a growing number of soft X-ray observations of hot DAs, and contribute to the understanding of He and trace metal abundance patterns in hot DAs.

Holberg, J. B.↗

Magnetic fine structure of solar coronal loops

A numerical simulation of the effect of a random photospheric flow on the magnetic structure of a coronal loop is presented. An initially uniform field embedded in a perfectly conducting plasma is assumed, extending between two flat parallel plates representing the solar photosphere at both ends of the loop. The field is perturbed by a sequence of randomly phased, sinusoidal flow patterns applied at one of the boundary plates, and the corresponding sequence of force-free fields is determined. It is found that the electric currents generated by these flows develop a fine structure on a scale significantly smaller than the wavelength of the velocity patterns. This suggests that magnetic energy is transferred to smaller scale via a cascade process.

Van Ballegooijen, A. A.↗

Electrical measurements over active thunderstorms

During the summer of 1986, the air conductivity and the vertical electric field were measured over active thunderstorms from a high altitude U-2 airplane. The conductivity at 20 km remained relatively steady above storms with variations less than + or - 15 percent while vertical electric fields in excess of 5 kV/m were regularly observed. Estimates of the storm generator current and the C.T.R. Wilson (i.e., conduction) current can be obtained using the current densities derived from the conductivity and field measurements and integrated over area. Upward flowing currents of 0.05 to 7.7 A were observed with an average of 2.2 A. More importantly, the U-2 data show that the storm current varies linearly with flash rate, therefore, the average charge transfer per discharge should be independent of storm development or activity.

Blakeslee, Richard J.↗

Development of FIR arrays with integrating amplifiers

The development of optimized photoconductor arrays suitable for far infrared space astronomical applications are described. Although the primary impetus is the production of a 16 by 16 element Ge:Ga demonstration array for SIRTF, the extension of this technology to Large Deployable Reflector (LDR) is considered. The optimization of Ge:Ga and Ge:Be photoconductor materials is discussed. In collaboration with Lawrence Berkeley Laboratory, measurements of FIR photoconductors with quantum efficiencies greater than 20 percent at 100 micrometers, and dark currents below 300 electrons/s are presented. Integrating J-FET amplifier technology is discussed. The current generation of integrating amplifiers has a demonstrated read noise of less than 20 electrons for an integration time of 100 s. The design is shown for a stackable 16 x n Ge:Ga array that utilizes a 16-channel monolithic version of the J-FET integrator. A part of the design is the use of a thin, thermally insulating substrate that allows the electronics to operate at the optimum temperature of 50 K while maintaining thermal and optical isolation from the detectors at 2 K. The power dissipation for the array is less than 16 mW. The array design may particularly be applicable to high resolution imaging spectrometers for LDR.

Young, Erick T.↗

Superconducting gravity gradiometer and a test of inverse square law

The equivalence principle prohibits the distinction of gravity from acceleration by a local measurement. However, by making a differential measurement of acceleration over a baseline, platform accelerations can be cancelled and gravity gradients detected. In an in-line superconducting gravity gradiometer, this differencing is accomplished with two spring-mass accelerometers in which the proof masses are confined to motion in a single degree of freedom and are coupled together by superconducting circuits. Platform motions appear as common mode accelerations and are cancelled by adjusting the ratio of two persistent currents in the sensing circuit. The sensing circuit is connected to a commercial SQUID amplifier to sense changes in the persistent currents generated by differential accelerations, i.e., gravity gradients. A three-axis gravity gradiometer is formed by mounting six accelerometers on the faces of a precision cube, with the accelerometers on opposite faces of the cube forming one of three in-line gradiometers. A dedicated satellite mission for mapping the earth's gravity field is an important one. Additional scientific goals are a test of the inverse square law to a part in 10(exp 10) at 100 km, and a test of the Lense-Thirring effect by detecting the relativistic gravity magnetic terms in the gravity gradient tensor for the earth.

Moody, M. V.↗

On developing the local research environment of the 1990s - The Space Station era

A requirements analysis for the Space Station's polar platform data system has been performed. Based upon this analysis, a cluster, layered cluster, and layered-modular implementation of one specific module within the Eos Data and Information System (EosDIS), an active data base for satellite remote sensing research has been developed. It is found that a distributed system based on a layered-modular architecture and employing current generation work station technologies has the requisite attributes ascribed by the remote sensing research community. Although, based on benchmark testing, probabilistic analysis, failure analysis and user-survey technique analysis, it is found that this architecture presents some operational shortcomings that will not be alleviated with new hardware or software developments. Consequently, the potential of a fully-modular layered architectural design for meeting the needs of Eos researchers has also been evaluated, concluding that it would be well suited to the evolving requirements of this multidisciplinary research community.

Chase, Robert↗

On oscillatory flow over topography in a rotating fluid

Quasi-geostrophic beta-plane motion of a homogeneous liquid over topography is considered for situations in which there is a time-periodic forcing of a zonal current. Such an oscillatory current generates a topographic Rossby wave response that has a complicated, but periodic, temporal structure. The linear solution grows resonances at all integer values of the beta-parameter. The nonlinear analysis demonstrates that for weak friction and forcing, the resonances are bent and multiple equilibria of the time-dependent Rossby wave states are possible in certain parameter ranges. While the basic forced flow in the absence of topography has no time-mean, the nonlinear amplitude equations show that a mean retrograde (westward) Eulerian zonal flow is generated in the interactions of the forced flow with the topography.

Hart, J. E.↗

Reflecting boundary conditions for graded p-n junctions

In a graded junction, the formalism for handling reflecting boundary conditions must be modified. Since a significant drift term is present, zero recombination velocity at the surface does not imply a zero excess carrier gradient but rather zero overall flux. A model for analyzing p-n junctions fabricated by implantation or diffusion is presented, assuming the dominant recombination mechanism in the graded region is Auger. The model enables optimization of diode design. By proper selection of parameters, mainly by reducing surface concentration or by increasing the steepness of the dopant profile, it is possible to drastically reduce the saturation current generated by the graded region.

Schacham, S. E.↗

Detector array evaluation and figures of merit

The commonly used methods to evaluate the performance of a two-dimensional focal-plane array using charge transfer devices are reviewed. Two figures of merit that attempt to combine quantum efficiency, read noise and dark-current generation into a single parameter are discussed. The figures of merit are suggested as possible alternatives to the D asterisk.

Dereniak, Eustace L.↗

Comparison of force and tactile feedback for grasp force control in telemanipulation

The comparative efficacy of using direct force feedback or a simple vibrotactile display to convey changes in the intensity of remote grasp force relayed from a robotic end effector is examined. The findings show that a simple vibrotactile cue, in the absence of direct force feedback, is effective in signaling abrupt changes in remote grasp force regardless of magnitude, and when changes in force are not too slow or protracted in nature (i.e., ramp time less than 2 s). In cases where the operator must dynamically tract and respond to slow but large variations in grasp force, the comparatively crude vibrotactile display would prove helpful; but would not be as effective as that of a direct contact force display. Immediate applications and utility of current generation and near-term prototype tactile displays are discussed.

Wiker, Steven F.↗

Plasma waves at Venus

Many significant wave phenomena have been discovered at Venus with the plasma wave instrument on the Pioneer Venus Orbiter. It has been shown that whistler-mode waves in the magnetosheath of the planet may be an important source of energy for the topside ionosphere. Plasma waves are also associated with thickening of the ionopause current layer. Current-generated waves in plasma clouds may also provide anomalous resistance resulting in electron acceleration, possibly producing aurora. Ion-acoustic waves are observed in the bow shock, and appear to be a feature of the magnetotail boundary. Lastly, plasma waves have been cited as evidence for lightning on Venus.

Strangeway, R. J.↗

Wing design code using three-dimensional Euler equations and optimization

This paper describes a new wing design code which is based on the Euler equations and a constrained numerical optimization technique. The geometry modification is based on a set of fundamental modes define on the unit interval. A design example involving a high speed civil transport wing is presented to demonstrate the usefulness of the design code. It is shown that the use of an Euler solver in the direct numerical optimization procedures is affordable on the current generation of supercomputers.

Chang, I-Chung↗

Air Force Phillips Laboratory Battery Program overview

Battery development and testing efforts at Phillips Laboratory fall into three main categories: nickel hydrogen, sodium sulfur, and solid state batteries. Nickel hydrogen work is broken down into a Low Earth Orbit (LEO) Life Test Program, a LEO Pulse Test Program, and a Hydrogen Embrittlement Investigation. Sodium sulfur work is broken down into a Geosynchronous Earth Orbit (GEO) Battery Flight Test and a Hot Launch Evaluation. Solid state polymer battery work consists of a GEO Battery Development Program, a Pulse Power Battery Small Business Innovation Research (SBIR), and an in-house evaluation of current generation laboratory cells. An overview of the program is presented.

House, Shaun↗

The NASA-IGES geometry data exchange standard

Described here are the data exchange efforts and plans supported by the NASA Steering Committee for Surface Modeling and Grid Generation. Current methods for geometry data exchange between computer aided design (CAD) systems and NASA computational fluid dynamics (CFD) analysis systems are tedious and induce errors. A Geometry Data Exchange Standard is proposed, utilizing a subset of an existing national standard titled Initial Graphic Exchange Standard (IGES). Future plans for data exchange standardization include all aspects of CFD data. Software systems to utilize this NASA-IGES Geometry Data Exchange Specification are under development.

Blake, Matthew W.↗

Using the stereokinetic effect to convey depth - Computationally efficient depth-from-motion displays

Recent developments in microelectronics have encouraged the use of 3D data bases to create compelling volumetric renderings of graphical objects. However, even with the computational capabilities of current-generation graphical systems, real-time displays of such objects are difficult, particularly when dynamic spatial transformations are involved. In this paper we discuss a type of visual stimulus (the stereokinetic effect display) that is computationally far less complex than a true three-dimensional transformation but yields an equally compelling depth impression, often perceptually indiscriminable from the true spatial transformation. Several possible applications for this technique are discussed (e.g., animating contour maps and air traffic control displays so as to evoke accurate depth percepts).

Kaiser, Mary K.↗

Nonlinear evolution of resistive tearing mode instability with shear flow and viscosity

The effect of shear flow on the nonlinear evolution of the tearing mode is investigated via numerical solutions of the resistive MHD equations in slab geometry, using a finite-difference alternative-direction implicit method. It was found that, when the shear flow is small (V less than 0.3), the tearing mode saturates within one resistive time, whereas for larger flows the nonlinear saturation develops on longer time scales. The magnetic energy release decreases and the saturation time increases with increasing values of V for both small and large resistivity. Shear flow was found to decrease the saturated magnetic island width and to generate currents far from the tearing layer. Results suggest that equilibrium shear flow may improve the confinement of tokamak plasma.

Ofman, L.↗

Shell stability analysis in a computer aided engineering (CAE) environment

The development of 'DISDECO', the Delft Interactive Shell DEsign COde is described. The purpose of this project is to make the accumulated theoretical, numerical and practical knowledge of the last 25 years or so readily accessible to users interested in the analysis of buckling sensitive structures. With this open ended, hierarchical, interactive computer code the user can access from his workstation successively programs of increasing complexity. The computational modules currently operational in DISDECO provide the prospective user with facilities to calculate the critical buckling loads of stiffened anisotropic shells under combined loading, to investigate the effects the various types of boundary conditions will have on the critical load, and to get a complete picture of the degrading effects the different shapes of possible initial imperfections might cause, all in one interactive session. Once a design is finalized, its collapse load can be verified by running a large refined model remotely from behind the workstation with one of the current generation 2-dimensional codes, with advanced capabilities to handle both geometric and material nonlinearities.

Arbocz, J.↗

Microelectrode-based technology for the detection of low levels of bacteria

A microelectrode-based electrochemical detection method was used for quantitation of bacteria in water samples. The redox mediator, benzoquinone, was used to accept electrons from the bacterial metabolic pathway to create a flow of electrons by reducing the mediator. Electrochemical monitoring electrodes detected the reduced mediator as it diffused out of the cells and produced a small electrical current. By using a combination of microelectrodes and monitoring instrumentation, the cumulative current generated by a particular bacterial population could be monitored. Using commercially available components, an electrochemical detection system was assembled and tested to evaluate its potential as an emerging technology for rapid detection and quantitation of bacteria in water samples.

Rogers, Tom D.↗