SEARCH · Engineering Papers

Results for “cross sections”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Electron impact cross sections for the 2,2P state excitation of lithium

Electron impact excitation of the 2p 2P state of Li was studied at 10, 20, 60, 100, 150 and 200 eV. Relative differential cross sections in the angular range 3-120 deg were measured and then normalized to the absolute scale by using the optical f value. Integral and momentum transfer cross sections were obtained by extrapolating the differential cross sections to 0 deg and to 180 deg. The question of normalizing electron-metal-atom collision cross sections in general was examined and the method of normalization to optical f values in particular was investigated in detail. It has been concluded that the extrapolation of the apparent generalized oscillator strength (obtained from the measured differential cross sections) to the zero momentum transfer limit with an expression using even powers of the momentum transfer and normalization of the limit to the optical f value yields reliable absolute cross sections.

Vuskovic, L.↗

NASA NTRS2016

Average Cross-Sectional Area of DebriSat Fragments Using Volumetrically Constructed 3D Representations

Debris fragments from the hypervelocity impact testing of DebriSat are being collected and characterized for use in updating existing satellite breakup models. One of the key parameters utilized in these models is the ballistic coefficient of the fragment which is directly related to its area‐to‐mass ratio. However, since the attitude of fragments varies during their orbital lifetime, it is customary to use the average cross‐sectional area in the calculation of the area‐to‐mass ratio. The average cross‐sectional area is defined as the average of the projected surface areas perpendicular to the direction of motion and has been shown to be equal to one‐fourth of the total surface area of a convex object. Unfortunately, numerous fragments obtained from the DebriSat experiment show significant concavity (i.e., shadowing) and thus we have explored alternate methods for computing the average cross‐sectional area of the fragments. An imaging system based on the volumetric reconstruction of a 3D object from multiple 2D photographs of the object was developed for use in determining the size characteristic (i.e., characteristics length) of the DebriSat fragments. For each fragment, the imaging system generates N number of images from varied azimuth and elevation angles and processes them using a space‐carving algorithm to construct a 3D point cloud of the fragment. This paper describes two approaches for calculating the average cross‐sectional area of debris fragments based on the 3D imager. Approach A utilizes the constructed 3D object to generate equally distributed cross‐sectional area projections and then averages them to determine the average cross‐sectional area. Approach B utilizes a weighted average of the area of the 2D photographs to directly compute the average cross‐sectional area. A comparison of the accuracy and computational needs of each approach is described as well as preliminary results of an analysis to determine the "optimal" number of images needed for the 3D imager to accurately measure the average cross sectional area of objects with known dimensions.

Scruggs, T.↗

NASA NTRS2005

Integral cross sections for the direct excitation of the A 3 (sigma) u +, B 3 (pi) g, W 3 (delta) u, B' 3 (sigma) u -, a' 1 (sigma) u -, a 1 (pi) g, w 1 (delta) u, and C 3 (pi) u electronic states in

Integral cross sections for electron impact excitation out of the ground state (X 1(sigma)g +) to the A 3(sigma)u +, B 3(pi)g, W 3(delta)u, B' 3(sigma)u -, a' 1(sigma)u -, a 1(pi)g, w 1(delta)u, and states in N2 are reported at incident energies ranging between 10 and 100 eV. These data have been derived by integrating differential cross sections previously reported by this group. New differential cross section measurements for the a 1(pi)g state at 200 eV are also presented to extend the range of the reported integral cross sections for this state, which is responsible for the emissions of the Lyman-Birge-Hopfield band system (a 1(pi)g (rightwards arrow) X 1(sigma)g +). The present results are compared and critically evaluated against existing cross sec In general, the present cross sections are smaller than previous results at low impact energies from threshold through the excitation function peak regions. These lower cross sections have potentially significant implications on our understanding of UV emissions in the atmospheres of Earth and Titan.

Ultraviolet Imaging Spectograph↗

DOE OSTI2024

Modeling Enhancements, Cross-Section Generation Updates, and Benchmarking with Shift

This technical report documents the modeling enhancements, cross-section generation updates, and bench marking with the Shift Monte Carlo code performed under the US Department of Energy Nuclear Energy Advanced Modeling and Simulation Program in FY 2024. The work performed included several modeling enhancements, such as integration of cross-section generation in Titan and the ability to produce microscopic multigroup cross sections with Shift. Benchmarking of the cross sections produced by Shift and the two-step workflow with Griffin was performed for three problems: the Advanced Breeder Test Reactor, a generic pebble bed reactor, and a TRISO heat pipe microreactor. Comparisons of results from these benchmark problems were done with Serpent, OpenMC, and Griffin. These enhancements provide a robust foundation for applying Shift for both reference and two-step neutronics analysis for advanced reactor simulation.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS1985

The ultraviolet cross-sections of ozone. I. The measurements. II - Results and temperature dependence

Absorption cross-sections of ozone have been measured over the range 230 nm to 350 nm, and for temperatures 200 K to 300 K, with improved photometric accuracy and spectral resolution. These measurements are referred to the cross-section at the 253.65 nm mercury line by the Hearn value (1961), 1147 x 10 to the -20th/sq cm, and show an internal consistency of + or - 1 percent. Tables of ozone absorption cross-section in the ultraviolet have been prepared for intervals of 0.05 nm over the range 245 to 340 nm. at each wavelength entry in the table a set of coefficients has been derived that permits the cross-section to be computed as a function of temperature, between 200 K and 300 K, with an accuracy of 1 percent.

Bass, A. M.↗

DOE OSTI2015

Influence of electron-neutral collisions on the Compton scattering cross section and the Salpeter structure factor in warm collisional plasmas

The electron-neutral collision effects on the Compton scattering process are investigated in warm collisional plasmas. The Compton scattering cross section in warm collisional plasmas is obtained by the Salpeter structure factor with the fluctuation-dissipation theorem and the plasma dielectric function as a function of the electron-neutral collision frequency, Debye length, and wave number. It is shown that the influence of electron-neutral collision strongly suppresses the Compton scattering cross section in warm collisional plasmas. It is also found that the electron-neutral collision effect on the differential Compton scattering cross section is more significant in forward scattering directions. We show that the differential Compton scattering cross section has a maximum at the scattering angle φ=π/2. In addition, we find that the electron-neutral collision effect on the total Compton scattering cross section increases with increasing Debye length and wave number. The variation of the Compton scattering cross section due to the change of collision frequency and plasma parameters is also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2026

Neutrino-Argon Cross Sections in MicroBooNE: Measurements Spanning Multiple Interaction Channels, Final States, and Neutrino Fluxes

Neutrinos are one of the most elusive particles in the Standard Model of particle physics due to their tiny interaction cross section, which makes them challenging to detect and study. There are three known flavors of neutrinos, and any given neutrino probabilistically oscillates between them as a function of the particle's energy and propagation distance. Experimental characterization of these oscillations elucidates fundamental properties of the neutrino and the Standard Model. Meeting the precision goals of ongoing and future oscillation measurements requires detailed modeling of the way neutrinos interact with nuclear matter. Precision modeling of these interactions is a challenging theoretical problem, rich with intricate physics effects to explore, and requires input from equally precise measurements of neutrino-nucleus interaction cross sections spanning a broad range of scattering channels. To fill this need, there is an ongoing multi-experiment effort to measure these cross sections across energies, interaction channels, and nuclear targets. This thesis describes three analyses reporting neutrino-argon cross section measurements with data from the MicroBooNE liquid argon time projection chamber detector. These span multiple interaction channels, final state topologies, and neutrino fluxes. The first analysis is a set of inclusive charged current muon neutrino cross section measurements for final states with and without protons, which provides a unique view of the hadronic final state produced in these interactions. Second is a set of cross section measurements for neutral current neutral pion production, which provides a vital dataset on this under-characterized channel. Third is significant progress on measuring neutrinos produced by kaons decaying at rest, which represents a unique opportunity to measure cross sections with a mono-energetic flux of neutrinos. These measurements are accompanied by a modeling study in the GiBUU theory framework, which probes the sensitivity of the muon neutrino and pion production measurements to the modeling of nucleon-nucleon final state interactions in neutrino-nucleus scattering.

Bogart, Benjamin [Michigan U.]↗

DOE OSTI2011

Ultrahigh energy predictions of proton-air cross sections from accelerator data: An update

At {radical}(s)=57{+-}7 TeV, the Pierre Auger Observatory (PAO) measured the p-air inelastic production cross section, {sigma}{sub p-air}{sup prod}=475{+-}22(stat){+-}{sub 15}{sup 20}(syst) mb, assuming a proton cosmic ray beam with a 25% helium contamination. From a Glauber calculation, they found the inelastic pp cross section, {sigma}{sub inel}=90{+-}7(stat){+-}{sub 11}{sup 9}(syst){+-}1.5(Glaub) mb. Our parameterization of pp and pp total cross sections, {sigma}{sub tot}, using analyticity constraints and unitarity gives accurate extrapolations to ultrahigh energies, and after using a Glauber calculation, accurate predictions for {sigma}{sub p-air}{sup prod}. We find (i) a pp total cross section, {sigma}{sub tot}=133.4{+-}1.6 mb and (ii) {sigma}{sub p-air}{sup prod}=483{+-}3 mb, independently determining a 19% helium contamination. Using our 57 TeV value for pp {sigma}{sub tot}[M. M. Block and F. Halzen, arXiv:1109-2041], we find a pp inelastic cross section, {sigma}{sub inel}=92.9{+-}1.6 mb, agreeing with POA.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRS1971

Differential cross sections at forward angles for hydrogen and helium particles from 62 MeV protons incident on Ni-60

Tabulated differential cross sections are presented for the production, at angles of 15, 20, 25, and 40 deg, of proton, deuteron, triton, helium-3, and alpha particles from Ni-60 bombarded by 62-MeV protons. Continuum cross sections are listed in about 1-MeV bins for energies above lower cutoffs which range from 4 to 15 MeV for the different types of exit particles. Only the integral cross section is known for a considerable energy range within each spectrum. The proton, deuteron, and alpha particle cross sections are the same in the continuum range region above the evaporation peak as those cross sections previously observed for Fe-54 and Fe-56, but the corresponding yield of tritons is higher from Ni-60 and Fe-56 than from Fe-54.

Peelle, R. W.↗

DOE OSTI2012

Attenuation-based estimation of patient size for the purpose of size specific dose estimation in CT. Part II. Implementation on abdomen and thorax phantoms using cross sectional CT images and scanned projection radiograph images

Purpose: To estimate attenuation using cross sectional CT images and scanned projection radiograph (SPR) images in a series of thorax and abdomen phantoms. Methods: Attenuation was quantified in terms of a water cylinder with cross sectional area of A{sub w} from both the CT and SPR images of abdomen and thorax phantoms, where A{sub w} is the area of a water cylinder that would absorb the same dose as the specified phantom. SPR and axial CT images were acquired using a dual-source CT scanner operated at 120 kV in single-source mode. To use the SPR image for estimating A{sub w}, the pixel values of a SPR image were calibrated to physical water attenuation using a series of water phantoms. A{sub w} and the corresponding diameter D{sub w} were calculated using the derived attenuation-based methods (from either CT or SPR image). A{sub w} was also calculated using only geometrical dimensions of the phantoms (anterior-posterior and lateral dimensions or cross sectional area). Results: For abdomen phantoms, the geometry-based and attenuation-based methods gave similar results for D{sub w}. Using only geometric parameters, an overestimation of D{sub w} ranging from 4.3% to 21.5% was found for thorax phantoms. Results for D{sub w} using the CT image and SPR based methods agreed with each other within 4% on average in both thorax and abdomen phantoms. Conclusions: Either the cross sectional CT or SPR images can be used to estimate patient attenuation in CT. Both are more accurate than use of only geometrical information for the task of quantifying patient attenuation. The SPR based method requires calibration of SPR pixel values to physical water attenuation and this calibration would be best performed by the scanner manufacturer.

60 APPLIED LIFE SCIENCES↗

NASA NTRS1993

Measurements of absolute absorption cross sections of ozone in the 185- to 254-nm wavelength region and the temperature dependence

Laboratory measurements of the relative absorption cross sections of ozone at temperatures 195, 228, and 295 K have been made throughout the 185 to 254 nm wavelength region. The absolute absorption cross sections at the same temperatures have been measured at several discrete wavelengths in the 185 to 250 nm region. The absolute cross sections of ozone have been used to put the relative cross sections on a firm absolute basis throughout the 185 to 255 nm region. These recalibrated cross sections are slightly lower than those of Molina and Molina (1986), but the differences are within a few percent and would not be significant in atmospheric applications.

Yoshino, K.↗

DOE OSTI2018

Experimental Results on Ultrahigh-Energy Cosmic Rays and Asymptotic Behavior of the Total Cross Section for Nucleon–Nucleon Interaction

Results obtained by studying the energy dependence of the total cross section for nucleon–nucleon interaction are presented. The analytic parametrization proposed within axiomatic quantum field theory describes quantitatively a unified set of experimental data on proton–proton and antiproton–proton scattering. At collision energies above 86 GeV, the parameter values fitted to subsets of all available data and accelerator data alone were found to deviate from the respective asymptotic values. This indicates that the Froissart–Martin limit for the total cross section has not yet been reached in the case of these subsets. An approximation of the total nucleon–nucleon cross section measured in cosmic rays leads for some parameters to fitted values that, within 1.0 to 1.3 standard deviations, agree with the respective asymptotic values. This resultmay be viewed as an indication of the beginning of the asymptotic functional behavior of the total nucleon–nucleon cross section measured in cosmic rays of ultrahigh energy O(100 TeV). This is confirmed within the color glass condensate approach.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2014

Parameterized representation of macroscopic cross section for PWR reactor

Here we describe, by means of Chebyshev polynomials, a parameterized representation of the homogenized macroscopic cross section for PWR fuel element as a function of soluble boron concentration, moderator temperature, fuel temperature, moderator density and U-235(92) enrichment. The cross-section data analyzed are fission, scattering, total, transport, absorption and capture. The parameterization enables a quick and easy determination of problem-dependent cross-sections to be used in few group calculations. The methodology presented in this paper will allow generation of group cross-section data from stored polynomials to perform PWR core calculations without the need to generate them based on computer code calculations using standard steps. The results obtained by the proposed methodology when compared with results from the SCALE code calculations show very good agreement.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

NASA NTRS1986

Determination of band oscillator strengths of atmospheric molecules from high resolution vacuum ultraviolet cross section measurements

An account is given of progress in work on (1) the determination of band oscillator strengths of the Schumann-Runge absorption bands of (16)O2 and (18)O2 from cross section measurements conducted at 79 K; (2) the determination of the absolute absorption cross section of the Schumann-Runge bands of (16)O(18)O from optical depth measurements performed on mixtures of (16)O2, (18)O2 and (16)O(18)O at 79K; and (3) the influence of Schumann-Runge linewing contributions on the determination of the Herzberg continuum absorption cross section of (16)O2 in the wavelength region 194 to 204 nm. The experimental investigations are effected at high resolution with a 6.65 m scanning spectrometer which is, by virtue of its small instrumental width (EWHM = 0.0013 nm), uniquely suitable for cross section measurements of molecular bands with discrete rotational structure. Absolute cross sections, which are independent of the instrumental function and from which band oscillator strengths are directly determined, are measured for the absorption bands that are most predissociated. Such measurements are needed for (1) accurate calculations of the stratospheric production of atomic oxygen and heavy ozone formed following the photopredissociation of (18)O(16)O by solar radiation penetrating between the absorption lines of (16)O2; (2) elucidation of the mechanism of predissociation of the upper state of the Schumann-Runge bands; and (3) determination of the true shape of the Herzberg continuum cross section.

Parkinson, W. H.↗

DOE OSTI2017

Measurement of inclusive jet and dijet cross-sections in proton-proton collisions at s = 13 TeV with the ATLAS detector

Measurement of inclusive jet cross-sections with the ATLAS Detector at a centre-of-mass energy 13 TeV Inclusive jet and dijet cross-sections are measured in proton-proton collisions at a centre-of-mass energy of 13 TeV. The measurement uses a dataset with an integrated luminosity of 3.2 fb$^{−1} recorded in 2015 with the ATLAS detector at the Large Hadron Collider. Jets are identified using the anti-kt algorithm with a radius parameter value of R=0.4. The inclusive jet cross-sections are measured double-differentially as a function of the jet transverse momentum, covering the range from 100 GeV to 3.5 TeV, and the absolute jet rapidity up to |y|=3. The double-differential dijet production cross-sections are presented as a function of the dijet mass, covering the range from 300 GeV to 9 TeV, and the half absolute rapidity separation between the two leading jets within |y|<3, y∗, up to y∗=3. Next-to-leading-order, and next-to-next-to-leading-order for the inclusive jet measurement, perturbative QCD calculations corrected for non-perturbative and electroweak effects are compared to the measured cross-sections.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2024

Measurement of the Z boson production cross-section in pp collisions at $ \sqrt{s}$ = 5.02 TeV

The first measurement of the Z boson production cross-section at centre-of-mass energy $\sqrt{s}$ = 5.02 TeV in the forward region is reported, using pp collision data collected by the LHCb experiment in year 2017, corresponding to an integrated luminosity of 100 ± 2 pb –1 . The production cross-section is measured for final-state muons in the pseudorapidity range 2.0 < η < 4.5 with transverse momentum p T > 20 GeV/c. The integrated cross-section is determined to be ${\sigma}_{Z\to \mu +\mu -}=39.6\pm 0.7\left(\textrm{stat}\right)\pm 0.6\left(\textrm{syst}\right)\pm 0.8\left(\textrm{lumi}\right)\textrm{pb}$ for the di-muon invariant mass in the range 60 < M μμ < 120 GeV/c 2 . This result and the differential cross-section results are in good agreement with theoretical predictions at next-to-next-to-leading order in the strong coupling constant. Based on a previous LHCb measurement of the Z boson production cross-section in pPb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV, the nuclear modification factor RpPb is measured for the first time at this energy. The measured values are ${1.2}_{-0.3}^{+0.5}$ (stat) ± 0.1(syst) in the forward region (1.53 < ${y}_{\mu}^{\ast }$ < 4.03) and ${3.6}_{-0.9}^{+1.6}$ (stat) ± 0.2(syst) in the backward region (–4.97 < ${y}_{\mu}^{\ast }$ < –2.47), where ${y}_{\mu}^{\ast }$ represents the muon rapidity in the centre-of-mass frame.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2016

Improved Few-group Homogenized Cross-section Sensitivity Analysis for Lattice Physics Calculation

In the conventional reactor physics 'two-step' calculation scheme, lattice-physics calculation is followed by core calculation using neutron diffusion theory. The few-group spatially homogenized cross-sections are the outputs of the lattice-physics calculation as well as the inputs of the core calculation. The uncertainties of fundamental nuclear data will be propagated to the core calculation results through few-group spatially homogenized cross-sections. Consequently, assessing the sensitivity and uncertainty of few-group homogenized cross-sections is necessary for the core-calculation sensitivity and uncertainty analysis. Conventional method for sensitivity analysis is usually performed with respect to effective self-shielding cross sections but not continuous-energy cross sections by neglecting resonance self-shielding effects. The purpose of this work is to improve the sensitivity analysis of few-group cross sections and assess the effects introduced by resonance calculation with the subgroup method being used for resonance calculation. This paper is organized as follows: Firstly, theoretical models of this work are described. Secondly, validation and analysis are performed based on a boiling-water reactor (BWR) fuel-pin cell under hot zero power (HZP) condition. Finally, summaries and conclusions are given. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2011

Striking behavior of photoneutron cross sections for {sup 90}Zr near threshold

Photoneutron cross sections for {sup 90}Zr near neutron threshold were examined with a photon difference technique using laser Compton scattering {gamma}-ray beams. The cross section decreasing in the vicinity of neutron threshold exhibited a steep rise within 150 keV above the threshold. We draw attention to a possible relation of this striking behavior to the 3P valence neutron resonance known in neutron capture in the mass region A{approx_equal}90.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗