Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “core sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Mock-Up activities for the extraction of samples from a salt-stone disposal unit - 15502

Mock-up testing with respect to the core-drilling of simulant salt-stone grout was conducted to support the future retrieval of field-emplaced salt-stone samples from salt-stone Disposal Unit (SDU) Cell 2A. The primary objectives of extracting samples from SDU Cell 2A are to enable measurement of field-emplaced samples with respect to properties that influence long-term performance, such as saturated hydraulic conductivity, and to compare the measured properties for field-emplaced and comparable samples prepared in the laboratory. Initial mock-up activities (Phases 1 and 2) were conducted in Fiscal Years (FY) 2013 and 2014 in order to demonstrate the viability of standard core-drilling techniques that are typically employed for sampling concrete structures. The primary requirement for the core-drilling technique was that it should minimize the potential of physical or chemical sample changes that would artificially degrade key grout properties. Mock-up activities were aimed at optimizing the techniques for core-drilling, and subsequent sample extraction, using a set-up that mimicked, to the extent practical, both the physical characteristics, and operational complexities, of core-drilling salt-stone grout from the roof of the SDU. Samples extracted from the grout monolith were subsequently characterized with respect to saturated hydraulic conductivity and compressive strength, and compared to data for cast samples prepared using the same simulant salt-stone material. The comparison of these properties for the two sample types was expected to highlight potential flaws (e.g., micro-cracking) introduced by the core-drilling process. While the data for saturated hydraulic conductivity were virtually identical (approximately 2 E-09 cm/sec), the compressive strength of the core-drilled samples (approximately 3.5 MPa (500 psi)) was on average half that measured for the cast samples. It was suspected that increased water saturation and surface scoring of the core-drilled samples might account for the disparate compressive Strength data. During Phases 1 and 2 it was determined that cores could be successfully drilled and extracted to a depth of approximately 0.9 meters (3 feet) below the grout surface. Phase 3 (FY 2105) has been initiated and is primarily directed at demonstrating the ability to core-drill through approximately 1.8 meters (6 feet) of overlying grout to retrieve the desired sample from the SDU. The original drill depth of 0.6 - 0.9 meters (2-3 feet) was based on an SDU fill height of 5.6 meters (18.5 feet) and sample location of approximately 4.9 meters (16 feet); recently the allowable fill height in the SDUs has been increased to 6.5 meters (21.25 feet); hence the increased depth of overlying grout above the samples to be retrieved. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Electronic study of Al substituted La{sub 0.7}Ca{sub 0.3}MnO{sub 3} using photoemission spectroscopy

Polycrystalline samples of La{sub 0.7}Ca{sub 0.3}Mn{sub 1−X}Al{sub X}O{sub 3} (X=0, 0.05, 0.15) are prepared using solid state reaction route. Photoemission spectroscopy measurements were performed on these samples to investigate their electronic properties. Al shows 3+ oxidation state in both Al doped samples while no effect of Al doping is found on the core level spectrum of La 4d and Ca 2p orbitals and they were found in 3{sup +} and 2{sup +} oxidation state respectively in all the samples . Mn 2p core level photoemission measurements indicates that for 5% Al doped sample (lower doping) Al ions replaces the Mn{sup 3+} ions while they substitute Mn{sup 4+} in 15 % Al doped sample ((higher doping)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Asteroseismological study of massive ZZ Ceti stars with fully evolutionary models

We present the first asteroseismological study for 42 massive ZZ Ceti stars based on a large set of fully evolutionary carbon-oxygen core DA white dwarf models characterized by a detailed and consistent chemical inner profile for the core and the envelope. Our sample comprises all of the ZZ Ceti stars with spectroscopic stellar masses between 0.72 and 1.05 M {sub ☉} known to date. The asteroseismological analysis of a set of 42 stars enables study of the ensemble properties of the massive, pulsating white dwarf stars with carbon-oxygen cores, in particular the thickness of the hydrogen envelope and the stellar mass. A significant fraction of stars in our sample have stellar mass that is high enough to crystallize at the effective temperatures of the ZZ Ceti instability strip, which enables us to study the effects of crystallization on the pulsation properties of these stars. Our results show that the phase diagram presented in Horowitz et al. seems to be a good representation of the crystallization process inside white dwarf stars, in agreement with the results from white dwarf luminosity function in globular clusters.

79 ASTRONOMY AND ASTROPHYSICS↗

Atomic-Scale STEM Analysis Shows Structural Changes of Au–Pd Nanoparticles in Various Gaseous Environments

We report dynamical restructuring effects in free-standing Au 0.75 Pd 0.25 nanoparticles occurring in gaseous environments at elevated temperatures. The freshly prepared sample was found to have a core–shell structure with a Pd-rich phase on the surface. The evolution of sample composition and morphology under exposure to 1 bar of pure gases, namely O 2 , H 2 , air, CO, and CO 2 , at different temperatures was studied using in situ scanning transmission electron microscopy (STEM) and energy-dispersive X-ray spectroscopy (EDS). We observed sharper facets on the surface of the particles under O 2 or air at 400 °C. Small islands of Pd were present on the surface, although some Pd was redistributed inside the bulk when the temperature was increased under O 2 . Subtle changes in surface roughness were noted when O 2 was substituted with H 2 at 400 °C, an observation correlated to density functional theory (DFT) calculations. The particles lost clean surface facets when CO was introduced at room temperature and at 200 °C. No substantial changes could be observed after exposure to CO 2 at 250 °C. The adsorption of CO molecules on the surface modifies the surface of the particles and decreases the facet prevalence. Furthermore, these in situ observations show how gases can induce subtle modification of the surface of nanocatalysts, potentially impacting their chemical properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Opening-mode fracturing and cementation during hydrocarbon generation in shale: An example from the Barnett Shale, Delaware Basin, West Texas

Relative timing of fracturing is a key input for predictive fracture models, but timing information for fractures is commonly difficult to obtain. In this study, we used crosscutting relations and fluid inclusion assemblage temperatures from fracture cements from a few well-documented sampled fractures, combined with a one-dimensional burial history model, to establish timing for three generations of opening-mode fractures in a Barnett Shale core from the southern part of the Delaware Basin, Pecos County, West Texas. A burial history model is presented for the cored well and matched to measured vitrinite reflectance in samples from the core, and bottomhole temperature in the well. Here, the earliest fractures (group 1) likely formed due to early fluid-expulsion events (ca. 300 Ma) and were folded during host-rock compaction. Later group 2 fractures are sealed with fibrous barite containing primary, liquid hydrocarbon inclusions (mean homogenization temperature [T h ] = –9°C) and aqueous fluid inclusions (mean T h = 108.1°C). Group 2 fractures likely formed in response to fluid overpressure associated with cracking of type II kerogen to oil. Group 3 vertical fractures are up to 2 m in height with kinematic apertures ranging from less than 0.05 to 1.4 mm, partly open, and strike dominantly 010°–020°. Sequentially trapped aqueous fluid inclusions in fracture-spanning quartz cement bridges (mean T h = 110°C in crack-seal texture and 128°C in post-crack-seal fracture cement) record fracture opening under increasing temperature, inferred to reflect increasing burial, with continued overpressuring during the Triassic to Late Cretaceous. Some group 3 fractures may have continued to fill during Cenozoic uplift.

02 PETROLEUM↗

ZPPR-15 Small Reactivity Worth Experiments

In addition to measuring the worth of sodium voiding and the worth of simulated control rods, the ZPPR staff measured the Doppler worth of four standard samples, the worth of axial expansion and the worth of radial bowing in ZPPR-15. Doppler sample worths were measured in ZPPR-15A, ZPPR-15B and ZPPR-15D. The Doppler samples were natural UO 2 , depleted uranium metal, depleted U-10Zr alloy and 33% enriched UO 2 . These samples were placed in a sample capsule in the inner core of ZPPR-15 and heated to various temperatures between 300 K and 1100 K. The resulting changes in reactivity relative to the reference configuration were measured to determine the Doppler worths of the samples. Special segmented drawers were constructed to measure the worth of axial expansion in ZPPR15. The segments were connected to each other, and the back segment was connected to a spring-loaded cable. Pulling the cable introduced small gaps between drawer segments to simulate axial expansion, and releasing the cable eliminated those gaps. The worth of this simulated axial expansion was measured in ZPPR-15A, ZPPR-15B and ZPPR-15D. The worth of radial bowing was measured in ZPPR-15, but the experimenters regarded the result as unsatisfactory. Radial bowing was measured by two methods in ZPPR-17A, so the ZPPR-17A bowing measurements were analyzed in place of the unpublished ZPPR-15 radial bowing measurement. The first ZPPR-17A measurement consisted of rearranging the plates in 96 core drawers at the core-radial blanket boundary to simulate outward motion of the fuel during bowing. The second ZPPR-17A measurement used a new bowing oscillator to move the core plates a small distance vertically in a special drawer. The published uncertainties for the Doppler worth, axial expansion worth and radial bowing worth measurements are the statistical uncertainties in the measurements. In reality, the published uncertainty for each of these measurements is just one component of the total uncertainty. There are additional uncertainties specific to each measurement and a common uncertainty related to conversion from the natural measurement units, cents, to pcm for calculations. A full uncertainty analysis was performed for each measurement. The significant uncertainties were quantified, and a total uncertainty was determined for each measurement. The ZPPR-15 and ZPPR-17A experimental records were used to create detailed as-built Monte Carlo models of the Doppler worth, axial expansion and radial bowing measurement configurations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The impact of freeze-thaw history on soil carbon response to experimental freeze-thaw cycles

This dataset contains data used for the paper "The impact of freeze-thaw history on soil carbon response to experimental freeze-thaw cycles". The Related References field will be updated with a full citation when available.Freeze-thaw is a disturbance process in cold regions where permafrost soils are becoming vulnerable to temperature fluctuations above 0˚C. Freeze-thaw alters soil physical and biogeochemical properties with implications for carbon persistence and emissions in Arctic landscapes. We examined whether different freeze-thaw histories in two soil systems led to contrasting biogeochemical responses under a laboratory-controlled freeze-thaw incubation. We investigated controls on soil organic matter (SOM) composition through Fourier-transform ion cyclotron resonance mass spectroscopy (FT-ICR-MS) to identify nominal carbon oxidation states and relative abundances of aliphatic-type carbon molecules in both surface and subsurface soils. Soil cores (~ 60 cm-depth) were sampled from two sites in Alaskan permafrost landscapes with different in situ freeze-thaw characteristics: Healy (>40 freeze-thaw cycles annually) and Toolik (<150 freeze-thaw cycles annually). FT-ICR-MS was coupled with in situ temperature data and soil properties (i.e., soil texture, mineralogy) to assess (1) differences in SOM composition associated with previous freeze-thaw history and (2) sensitivity to experimental freeze-thaw in the extracted cores. Control (freeze-only) samples showed greater carbon oxidation in Healy soils compared with Toolik, even in lower mineral horizons where freeze-thaw history was comparable across both sites. Healy showed the most loss of carbon compounds following experimental freeze-thaw in the lower mineral depths, including a decrease in aliphatics. Toolik soils responded more slowly to freeze-thaw as shown by intermediary carbon oxidation distributed across multiple carbon compound classes. Variations in the response of permafrost carbon chemistry to freeze-thaw is an important factor for predicting changes in soil function as permafrost thaws in high northern latitudes.This dataset contains a compressed (.zip) archive of the data and R scripts used for this manuscript. The dataset includes files in .csv format, which can be accessed and processed using MS Excel or R. This archive can also be accessed on GitHub at https://github.com/Erin-Rooney/FTC-FTICR (DOI 10.5281/zenodo.6533064).

54 ENVIRONMENTAL SCIENCES↗

HIGH-REDSHIFT COOL-CORE GALAXY CLUSTERS DETECTED VIA THE SUNYAEV-ZEL'DOVICH EFFECT IN THE SOUTH POLE TELESCOPE SURVEY

We report the first investigation of cool-core properties of galaxy clusters selected via their Sunyaev-Zel'dovich (SZ) effect. We use 13 galaxy clusters uniformly selected from 178 deg{sup 2} observed with the South Pole Telescope (SPT) and followed up by the Chandra X-ray Observatory. They form an approximately mass-limited sample (>3 Multiplication-Sign 10{sup 14} M{sub Sun} h {sup -1}{sub 70}) spanning redshifts 0.3 < z < 1.1. Using previously published X-ray-selected cluster samples, we compare two proxies of cool-core strength: surface brightness concentration (c{sub SB}) and cuspiness ({alpha}). We find that c{sub SB} is better constrained. We measure c{sub SB} for the SPT sample and find several new z > 0.5 cool-core clusters, including two strong cool cores. This rules out the hypothesis that there are no z > 0.5 clusters that qualify as strong cool cores at the 5.4{sigma} level. The fraction of strong cool-core clusters in the SPT sample in this redshift regime is between 7% and 56% (95% confidence). Although the SPT selection function is significantly different from the X-ray samples, the high-z c{sub SB} distribution for the SPT sample is statistically consistent with that of X-ray-selected samples at both low and high redshifts. The cool-core strength is inversely correlated with the offset between the brightest cluster galaxy and the X-ray centroid, providing evidence that the dynamical state affects the cool-core strength of the cluster. Larger SZ-selected samples will be crucial in understanding the evolution of cluster cool cores over cosmic time.

79 ASTRONOMY AND ASTROPHYSICS↗

Al capping layers for nondestructive x-ray photoelectron spectroscopy analyses of transition-metal nitride thin films

X-ray photoelectron spectroscopy (XPS) compositional analyses of materials that have been air exposed typically require ion etching in order to remove contaminated surface layers. However, the etching step can lead to changes in sample surface and near-surface compositions due to preferential elemental sputter ejection and forward recoil implantation; this is a particular problem for metal/gas compounds and alloys such as nitrides and oxides. Here, the authors use TiN as a model system and compare XPS analysis results from three sets of polycrystalline TiN/Si(001) films deposited by reactive magnetron sputtering in a separate vacuum chamber. The films are either (1) air-exposed for ≤10 min prior to insertion into the ultrahigh-vacuum (UHV) XPS system; (2) air-exposed and subject to ion etching, using different ion energies and beam incidence angles, in the XPS chamber prior to analysis; or (3) Al-capped in-situ in the deposition system prior to air-exposure and loading into the XPS instrument. The authors show that thin, 1.5–6.0 nm, Al capping layers provide effective barriers to oxidation and contamination of TiN surfaces, thus allowing nondestructive acquisition of high-resolution core-level spectra representative of clean samples, and, hence, correct bonding assignments. The Ti 2p and N 1s satellite features, which are sensitive to ion bombardment, exhibit high intensities comparable to those obtained from single-crystal TiN/MgO(001) films grown and analyzed in-situ in a UHV XPS system and there is no indication of Al/TiN interfacial reactions. XPS-determined N/Ti concentrations acquired from Al/TiN samples agree very well with Rutherford backscattering and elastic recoil analysis results while ion-etched air-exposed samples exhibit strong N loss due to preferential resputtering. The intensities and shapes of the Ti 2p and N 1s core level signals from Al/TiN/Si(001) samples do not change following long-term (up to 70 days) exposure to ambient conditions, indicating that the thin Al capping layers provide stable surface passivation without spallation.

36 MATERIALS SCIENCE↗

TRISO PARTICLE FUEL POLISHING PROCESS COMPARISON

The investigation of the TRISO coated particles is important in terms of verification the quality of the nuclear fuel samples before placing them in the reactor core. To determine the degree of damage to the coated particles, the samples must be properly polished in order to uncover the inner layers. The poster presents a comparison of two polishing methods. Mechanical polishing method, which is used frequently for sample preparations generates additional mechanical damages in the studied fuel particle, thus directly affecting the experimental results. Due to that, a novel way to polish the samples is presented - an ionic polishing method. Based on the obtained results, it was concluded that the ion polishing method is better because the level of interference with the structures of the individual layers of the tested samples is much lower than with the mechanical method.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The spatial structure of young stellar clusters. I. Subclusters

The clusters of young stars in massive star-forming regions show a wide range of sizes, morphologies, and numbers of stars. Their highly subclustered structures are revealed by the MYStIX project's sample of 31,754 young stars in nearby sites of star formation (regions at distances <3.6 kpc that contain at least one O-type star.) In 17 of the regions surveyed by MYStIX, we identify subclusters of young stars using finite mixture models—collections of isothermal ellipsoids that model individual subclusters. Maximum likelihood estimation is used to estimate the model parameters, and the Akaike Information Criterion is used to determine the number of subclusters. This procedure often successfully finds famous subclusters, such as the BN/KL complex behind the Orion Nebula Cluster and the KW-object complex in M 17. A catalog of 142 subclusters is presented, with 1-20 subclusters per region. The subcluster core radius distribution for this sample is peaked at 0.17 pc with a standard deviation of 0.43 dex, and subcluster core radius is negatively correlated with gas/dust absorption of the stars—a possible age effect. Based on the morphological arrangements of subclusters, we identify four classes of spatial structure: long chains of subclusters, clumpy structures, isolated clusters with a core-halo structure, and isolated clusters well fit by a single isothermal ellipsoid.

79 ASTRONOMY AND ASTROPHYSICS↗

Fate of Co-60 at a Sludge Land Application Site

Vertical distributions of Co-60 are determined in soil cores obtained from a 10-hectare grassland, where anaerobically-digested sludge was applied by surface spraying from 1986 to 1995 on the U.S. Department of Energy’s Oak Ridge Reservation. These results, along with historical application records, are used to estimate vertical-migration rates and perform a mass balance. The presence of Co-60 results solely from the sludge-application process. Soil, vegetation, and surface-water samples were collected. Eleven soil cores were sectioned into 3-cm increments and analyzed by gamma-ray spectrometry. No Co-60 was detected in the vegetation or water samples. The downward migration rate of Co-60 in the upper 15 cm of soil ranged from 0.50 to 0.73 cm/yr. About 98 percent, 0.020 ± 0.011 Bq/cm2, of Co-60 remained in the upper 15 cm of soil, which compared favorably with the expected Co-60 activity based on historical records of 0.019 ± 0.010 Bq/cm2.

54 ENVIRONMENTAL SCIENCES↗

Production of 37Ar in The University of Texas TRIGA reactor facility

The detection of {sup 37}Ar is important for on-site inspections for the Comprehensive Nuclear-Test-Ban Treaty monitoring. In an underground nuclear explosion this radionuclide is produced by {sup 40}Ca(n,{alpha}){sup 37}Ar reaction in surrounding soil and rock. With a half-life of 35 days, {sup 37}Ar provides a signal useful for confirming the location of an underground nuclear event. An ultra-low-background proportional counter developed by Pacific Northwest National Laboratory is used to detect {sup 37}Ar, which decays via electron capture. The irradiation of Ar gas at natural enrichment in the 3L facility within the Mark II TRIGA reactor facility at The University of Texas at Austin provides a source of {sup 37}Ar for the calibration of the detector. The {sup 41}Ar activity is measured by the gamma activity using an HPGe detector after the sample is removed from the core. Using the {sup 41}Ar/{sup 37}Ar production ratio and the {sup 41}Ar activity, the amount of {sup 37}Ar created is calculated. The {sup 41}Ar decays quickly (half-life of 109.34 minutes) leaving a radioactive sample of high purity {sup 37}Ar and only trace levels of {sup 39}Ar.

37Ar, CTBT, On-Site Inspections, Radioargon↗

OPTICAL SPECTROSCOPY OF H{alpha} FILAMENTS IN COOL CORE CLUSTERS: KINEMATICS, REDDENING, AND SOURCES OF IONIZATION

We have obtained deep, high spatial and spectral resolution, long-slit spectra of the H{alpha} nebulae in the cool cores of nine galaxy clusters. This sample provides a wealth of information on the ionization state, kinematics, and reddening of the warm gas in the cool cores of galaxy clusters. We find evidence for only small amounts of reddening in the extended, line-emitting filaments, with the majority of filaments having E(B - V) < 0.2. We find, in agreement with previous works, that the optical emission in cool core clusters has elevated low-ionization line ratios. The combination of [O III]/H{beta}, [N II]/H{alpha}, [S II]/H{alpha}, and [O I]/H{alpha} allow us to rule out collisional ionization by cosmic rays, thermal conduction, and photoionization by intracluster medium (ICM) X-rays and active galactic nuclei as strong contributors to the ionization in the bulk of the optical line-emitting gas in both the nuclei and filaments. The data are adequately described by a composite model of slow shocks and star formation. This model is further supported by an observed correlation between the line widths and low-ionization line ratios which becomes stronger in systems with more modest star formation activity based on far-ultraviolet observations. We find that the more extended, narrow filaments tend to have shallower velocity gradients and narrower line widths than the compact filamentary complexes. We confirm that the widths of the emission lines decrease with radius, from FWHM {approx}600 km s{sup -1} in the nuclei to FWHM {approx}100 km s{sup -1} in the most extended filaments. The variation of line width with radius is vastly different than what is measured from stellar absorption lines in a typical giant elliptical galaxy, suggesting that the velocity width of the warm gas may in fact be linked to ICM turbulence and, thus, may provide a glimpse into the amount of turbulence in cool cores. In the central regions (r < 10 kpc) of several systems the warm gas shows kinematic signatures consistent with rotation, consistent with earlier work. We find that the kinematics of the most extended filaments in this sample are broadly consistent with both infall and outflow, and recommend further studies linking the warm gas kinematics to both radio and X-ray maps in order to further understand the observed kinematics.

79 ASTRONOMY AND ASTROPHYSICS↗

Actualistic and Geochemical Modeling of Reservoir Rock, CO 2 and Formation Fluid Interaction, Citronelle Oil Field, Alabama

This report includes description of the Citronelle field study area and the work carried out in the project to characterize the geology and composition of reservoir rock material and to collect an analyze the geochemical composition of produced fluid waters from the Citronelle field. Reservoir rock samples collected from well bore core were made into thin-sections and assessed for textural properties, including pore types and porosity distribution. Compositional framework grain modal data were collected via point-counting, and grain and cement mineralogy was assessed using SEM-EDS. Geochemistry of fluid samples is described and modeled using PHREEQC. Composition of rock and produced fluids were used as inputs for TOUGHREACT reactive transport modeling, which determined the rock-fluid system was in disequilibrium.

54 ENVIRONMENTAL SCIENCES↗

CO 2 mineralization in volcanogenic sandstones: geochemical characterization of the Etchegoin formation, San Joaquin Basin

Abstract Volcanogenic sandstones are typically rich in volcanic rock fragments that can provide reactive minerals for CO 2 mineralization in a scenario of CO 2 sequestration. To quantitatively evaluate the extent and time scale of CO 2 mineralization in potential reservoir formations, we characterized example high‐porosity volcanic sand from the San Joaquin Valley of southern Central California. Samples were collected from the volcanic‐rich members of the Etchegoin Formation in the San Joaquin Basin near Coalinga, California. Thin sections made from these samples were examined under petrographic microscope to identify mineral compositions, and then scanning electron microscopy (SEM) and energy dispersive x‐ray spectroscopy (EDX) were used to gather quantitative information on mineral abundances, distribution, and reactive surface areas. Porosity and permeability were also measured using core plugs made from outcrop samples. Results show that the Etchegoin volcanic sandstone has a high percentage (10–15%) of reactive minerals (pyroxenes, Fe‐Ti spinel and clays), and high reactive surface areas at about 1 m 2 /kg. Reactive transport modeling is conducted and shows that these reactive minerals could mineralize 92% of injected and capillary‐trapped CO 2 within 1000 years of injection. Possible effects of heterogeneity on CO 2 injection and mineralization are also studied using the reactive transport code TOUGHREACT. Vertical heterogeneity of mineralogy and hydrology increases both CO 2 injectivity and mineralization. Available volcanogenic sandstones worldwide like the Etchegoin sandstone are summarized from the literature, with formations from the western USA that have CO 2 sequestration potential emphasized.© 2015 Society of Chemical Industry and John Wiley & Sons, Ltd

Zhang, Shuo↗

SERPENT 2 and TRIPOLI-4 neutronics benchmarking of the Jules Horowitz reactor

Jules Horowitz Reactor (JHR) is a future center for nuclear material testing in Europe, currently under construction at CEA Cadarache in southern France. It has been modelled extensively with CEA's HORUS3D/N neutron calculation package, that includes a Monte-Carlo neutron transport code TRIPOLI-4. In order to support the future computational analyses on the reactor core physics, VTT's Monte Carlo neutronics code SERPENT 2 has been used to create an alternative model of the JHR, taking advantage of the pre-existing Constructive Solid Geometry (CSG) structures on which the TRIPOLI-4 model was built. This work describes a benchmark, in which two JHR core configurations were analyzed using both of these models. The first configuration is a fresh fuel core at the beginning of life, in which aluminum based dummy-devices are installed in the reactor test positions. The second configuration represents the end-of-cycle equilibrium core with a heterogeneous burnup distribution, in which CALIPSO devices containing cladding material samples are installed at the in-core experimental positions, while the reflector positions are occupied by DEN-REP devices containing UO{sub 2} fuel. Neutron flux spectra and heat deposition are the parameters of interest in this study, due to their high importance in creating the desired experimental irradiation environment. The impact of delayed gamma energy deposition will be studied in detail, since the two models account for it with different methods. This work aims to establish a SERPENT 2 model of JHR, understanding its differences and agreements with TRIPOLI-4, and discussing its potential future applications. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗