Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “core model proposal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS2009

Irradiation with molecular hydrogen as an accelerated total dose hardness assurance test method for bipolar linear circuits

High dose rate irradiation with hydrogen stress is proposed as an accelerated total dose test method for bipolar linear circuits. The method is validated across process and circuit technologies with five parts that are commonly used in space: a comparator (LM193 from National Semi-conductor), a voltage regulator (HSYE-117 RH from Intersil), a voltage reference (LT1019 from Linear Technology), a JFET input op amp (OP42 from Analog Devices) and a temperature transducer (AD590 from Analog Devices). The testing technique could rapidly establish an upper bound to the low dose rate response of parts in space and help with the part selection process in the design phase of a mission. The technology dependence and the viability of this technique are qualitatively explored using a physical model describing the dose rate response and the effect of hydrogen in bipolar technologies. The model uses four core processes: 1) space charge effects, 2) free electron/hole pair recombination, hole-hydrogen defect reactions in the oxides and 4) proton depassivation of dangling bonds at the Si/SiO2 interface. Radiation hardness assurance implications are discussed.

Pease, Ron↗
DOE OSTI2020

OpenCGRA: An Open-Source Unified Framework for Modeling,Testing, and Evaluating CGRAs

Coarse-grained reconfigurable arrays (CGRAs),loosely defined as arrays of functional units (e.g, adder, sub-tractor, multiplier, divider, or larger multi-operation units, butsmaller than a general-purpose core) interconnected through aNetwork-on-Chip, provide higher flexibility than domain-specificASIC accelerators while offering increased hardware efficiencywith respect to fine-grained reconfigurable devices, such as FieldProgrammable Gate Arrays (FPGAs). The fast evolving fieldsof machine learning and edge computing, which are seeing acontinuous flow of novel algorithms and larger models, makeCGRAs ideal target architectures to allow domain specializationwithout loosing too much generality. They also generally offerquicker and more effective reconfigurability than FPGAs, po-tentially allowing adaptation during actual algorithm execution,and implement a dataflow programming paradigm that adaptswell to these emerging workloads. Designing and generating aCGRA, however, still requires to define the type and number ofthe specific functional units, implement their interconnect andthe network topology, and perform its simulation and validation,given a variety of workloads of interest.In this paper, we propose OpenCGRA, a Python-based unifiedframework that integrates generation, modeling, testing and eval-uation for CGRAs. OpenCGRA is the first open-source integratedframework able to support the full top-to-bottom design flow forspecializing and implementing CGRAs: modeling at different ab-straction levels (functional level, cycle level, register-transfer level),generation, simulation, testing at different granularities (unit test-ing, integration testing, property-based testing), and characteriza-tion (area, power, and timing). OpenCGRAs will be made availableon GitHub.

CGRA, synthesis↗
DOE OSTI2022

New proposed ITER divertor design using carbon insert on tungsten to mitigate ELMs and secondary radiation effects on nearby components

Abstract Building a successful device for the magnetic fusion energy production is a great challenge. ITER is an international project of the tokamak based magnetic fusion design being developed for the demonstration of the feasibility of thermonuclear technologies for future realization of successful commercial fusion energy. A key obstacle to a successful magnetic fusion energy production is however, the performance during abnormal events including plasma disruptions and edge-localized modes (ELMs). A credible reactor design must tolerate at least a few of these transient events without serious consequences such as melting of the structure. This paper investigates and compares the performance of the current ITER tokamak design during two types of transient events, i.e., ELMs occurring at normal operation and disruptions during abnormal operation. We simulated the divertor components response using our integrated 3D HEIGHTS package. The simulations include self-consistent modeling of the interaction of the released core plasma particles with the initial solid divertor material, energy deposition processes, vaporization of divertor material, secondary plasma formation and MHD evolution, incident core particles collisions and scattering from this dense secondary plasma, photon radiation of secondary plasma, and the resulting heat loads on nearby components. Our simulations showed that using a small carbon insert around the strike point can significantly reduce the overall expected damage on the tungsten dome structure, reflector plates, and prevent tungsten vaporization and its potential core plasma contamination.

47 OTHER INSTRUMENTATION↗
NASA NTRS2000

The X-Ray Core of the Low-Luminosity Radio Galaxy 3C346 and ASCA Spectroscopy to Test BL LAC/Radio Galaxy Unification

Radio galaxies are relatively faint sources for Advanced Spacecraft for Cosmology Astrophysics (ASCA), and so in order to get the best possible results from the observations two things have been necessary, both of which delayed the fast preparation of papers. Firstly, the best possible data screening and background subtraction were necessary to improve the signal-to-noise, and all our several initial analysis trials were discarded in favor of using FTOOLS versions 4.1 and above. Secondly, we found that the ASCA spectra were statistically too poor to discriminate well between non-thermal and thermal models, never mind the mixture of the two which we expected on the basis of our ROSAT spatial separation of components in radio galaxies. This means that in each case we have needed to combine the ASCA spectroscopy with analysis of data from other X-ray or radio observations in order to exploit the ASCA data to the full. Our analysis for 3C 346 has yielded the cleanest final result. This powerful radio galaxy at a redshift of 0.161, lies in a poor cluster, which we have separated well from the dominant X-ray component of unresolved emission using a spatial analysis of archival ROSAT data. We were then able to fix the thermal component in our ASCA spectral analysis, and have found evidence that the unresolved emission varied by 32 +/- 13% over the 18 months between the ROSAT and ASCA observations. The unresolved X-ray emission does not suffer from intrinsic absorption, and we have related it to radio structures on both milliarcsecond scales and the arcsecond scales which Chandra can resolve. The source is a target of a Chandra AO2 proposal which we have recently submitted to follow up on our ASCA (and ROSAT) work. 3C 346's orientation to the line of sight is uncertain. However, the absence of X-ray absorption, and the radio/optical/X-ray colors, when combined with with previous radio evidence that the source is a foreshortened radio galaxy of the FRII class, suggest that the radio jets are seen at an angle to the line of sight of about 30 deg, intermediate between the radio-galaxy and quasar classes. The relatively hard ASCA response has allowed us to place an upper limit of 5.6 x 10(exp 43) ergs/ s on the 2-10 keV luminosity of any central X-ray component absorbed bN, gas which might be obscuring the broad-line emission region. Attached to this report is an almost final draft of a paper which we have prepared for submission to the Astrophysical Journal. Our combined ASCA and ROSAT results for NGC 6251 rule out our previously preferred flat-spectrum model and inverse-Compton interpretation for the source based on ROSAT data alone, but a softer X-ray spectrum and moderate absorption bring all the available data (including our early VLA HI measurements) into consistency, and we are reasonably confident that we understand the processes responsible for the X-ray emission. We have made some more sensitive HI absorption measurements which are currently being analyzed, and our plans are to publish our ASCA analysis in conjunction with the new HI results. The ASCA data for NGC 4261 have been difficult to interpret. A re-analysis of our ROSAT data with a wider range of physical parameters brings the ROSAT and ASCA results into reasonable agreement only if the emission from hot gas dominates more than suggested by our earlier work, which is itself unexpected since the radio core is bright and a large jet-related X-ray component would bring the source into agreement with results for others of its type. However, we have recently received our Chandra A01 data for this source, with the spatial resolution which allows us to separate thermal and non-thermal emission components. Our ASCA results will be re-interpreted once the analysis of our Chandra data is complete. The interpretation of the ASCA data for BL Lac object 3C 371 is ongoing, in conjunction with analysis of archival multifrequency data. Radio galaxies are complex in their X-ray properties, and hindsight has shown that the spatial resolution of ASCA is too poor for a reliable interpretation of the data without drawing on other observations. However, the ASCA spectra have made a useful contribution to the interpretation of these sources, and the groundwork is now there for more sensitive work using Chandra and XMM-Newton.

Worrall, Diana↗
DOE OSTI2021

Supernova neutrino signals based on long-term axisymmetric simulations

ABSTRACT We study theoretical neutrino signals from core-collapse supernova (CCSN) computed using axisymmetric CCSN simulations that cover the post-bounce phase up to ∼4 s. We provide basic quantities of the neutrino signals such as event rates, energy spectra, and cumulative number of events at some terrestrial neutrino detectors, and then discuss some new features in the late phase that emerge in our models. Contrary to popular belief, neutrino emissions in the late phase are not always steady, but rather have temporal fluctuations, the vigour of which hinges on the CCSN model and neutrino flavour. We find that such temporal variations are not primarily driven by proto-neutron star convection, but by fallback accretion in exploding models. We assess the detectability of these temporal variations, and find that IceCube is the most promising detector with which to resolve them. We also update fitting formulae first proposed in our previous paper for which the total neutrino energy emitted at the CCSN source is estimated from the cumulative number of events in each detector. This will be a powerful technique with which to analyse real observations, particularly for low-statistics data.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Sage: parallel semi-asymmtric graph algorithms for NVRAMs

Non-volatile main memory (NVRAM) technologies provide an attractive set of features for large-scale graph analytics, including byte-addressability, low idle power, and improved memory-density. NVRAM systems today have an order of magnitude more NVRAM than traditional memory (DRAM). NVRAM systems could therefore potentially allow very large graph problems to be solved on a single machine, at a modest cost. However, a significant challenge in achieving high performance is in accounting for the fact that NVRAM writes can be much more expensive than NVRAM reads. In this paper, we propose an approach to parallel graph analytics using the Parallel Semi-Asymmetric Model (PSAM), in which the graph is stored as a read-only data structure (in NVRAM), and the amount of mutable memory is kept proportional to the number of vertices. Similar to the popular semi-external and semi-streaming models for graph analytics, the PSAM approach assumes that the vertices of the graph fit in a fast read-write memory (DRAM), but the edges do not. In NVRAM systems, our approach eliminates writes to the NVRAM, among other benefits. To experimentally study this new setting, we develop Sage, a parallel semi-asymmetric graph engine with which we implement provably-efficient (and often work-optimal) PSAM algorithms for over a dozen fundamental graph problems. We experimentally study Sage using a 48--core machine on the largest publicly-available real-world graph (the Hyperlink Web graph with over 3.5 billion vertices and 128 billion edges) equipped with Optane DC Persistent Memory, and show that Sage outperforms the fastest prior systems designed for NVRAM. Importantly, we also show that Sage nearly matches the fastest prior systems running solely in DRAM, by effectively hiding the costs of repeatedly accessing NVRAM versus DRAM.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2016

Near-Earth Magnetic Field Effects of Large-Scale Magnetospheric Currents

Magnetospheric currents play an important role in the electrodynamics of near- Earth space. This has been the topic of many space science studies. Here we focus on the magnetic fields they cause close to Earth. Their contribution to the geomagnetic field is the second largest after the core field. Significant progress in interpreting the magnetic fields from the different sources has been achieved thanks to magnetic satellite missions like Ørsted, CHAMP and now Swarm. Of particular interest for this article is a proper representation of the magnetospheric ring current effect. Uncertainties in modelling its effect still produce the largest residuals between observations and present-day geomagnetic field models. A lot of progress has been achieved so far, but there are still open issues like the characteristics of the partial ring current. Other currents discussed are those flowing in the magnetospheric tail. Also their magnetic contribution at LEO orbits is non-negligible. Treating them as an independent source is a more recent development, which has cured some of the problems in geomagnetic field modelling. Unfortunately there is no index available for characterizing the tail current intensity. Here we propose an approach that may help to properly quantify the magnetic contribution from the tail current for geomagnetic field modelling. Some open questions that require further investigation are mentioned at the end.

Magnetospheric currents↗
DOE OSTI2022

Modeling the effect of nitrogen recycling on the erosion and leakage of tungsten impurities from the SAS-VW divertor in DIII-D during nitrogen gas injection

The new SAS-VW divertor in DIII-D has tungsten-coated components to enable the study of tungsten erosion and leakage from a closed, slot-like divertor. A proposed method of actively managing the tungsten impurities is to inject low-Z impurities, such as nitrogen, into the Scrape-off-Layer (SOL) to modify the conditions in the plasma boundary and in turn manipulate both the erosion and subsequent transport of tungsten. Nitrogen injection from the SOL crown has been modeled using SOLPS-ITER to calculate the background plasma including the intrinsic carbon and the injected nitrogen impurities, and subsequently DIVIMP has been used to calculate the tungsten erosion and transport on top of the background plasma solution. This workflow has been used to model scenarios at a variety of nitrogen injection rates with different assumptions about the nitrogen recycling at the target. In the scenario modeled here, an optimal nitrogen injection rate around 3-4 x 10 20 N/s is found to reduce the amount of tungsten reaching the core by a factor of about 2.4. However, when the nitrogen recycling rate at the divertor targets is high, the nitrogen redistributes within the slot leading to increased tungsten sputtering, and the range of injection rates resulting in tungsten mitigation becomes narrower.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Strategy to Develop a Control Scheme for Core Thermal Performance Optimization

This report outlines a three-year research plan for optimizing reactor core thermal performance through use of a Digital Twin (DT) model and a set of neutron detectors to correspondingly adapt the reactor control strategy. It identifies reactor features and achievable neutron measurements that factor into this optimization task. It considers spatial effects that are important and how they can be managed by a real-time algorithm that controls reactivity actuators. The report presents a set of tasks, along with corresponding methods, for accomplishing this objective. The final task in this set is to validate the combined optimization procedure in the Purdue University’s PUR-1 reactor, for which we have an agreement of understanding. Additionally, we describe an alternative approach for overcoming some of the limitations inherent in the above approach, which includes the computational costs of high-fidelity simulations and achievable integration of neutron measurements into the DT. The proposed algorithms lower the technology readiness level (TRL) of the overall approach as some additional analysis and the development of a new neutron detector concept are necessary. In particular, a sensor measuring the gradient of the neutron flux is required, and the prototype is expected to be validated in the PUR-1 reactor. The potential benefits and the opportunity to significantly push forward the state-of-the-art make this approach worthy of further exploration in the upcoming years.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1984

Changes in the High-latitude Ocean as Possible Causes of Atmospheric CO2 Variations

Measurements on air enclosed in old polar ice have indicated that the atmospheric CO2 concentration was ca. 50 to 70 ppm lower in late glacial times than during the Holocene. Similar measurements performed on samples from a Greenland ice core, dating ca. 30,000 to 40,000 B.P., and have yielded evidence of several CO2 oscillations with an amplitude of ca. 50 ppm. Each change lasted on the order of a few centuries. A mechanism by which circulation changes in the high-latitude ocean could lead to rapid variations in atmospheric CO2 is proposed. In the Antarctic Ocean a slowing down of the vertical mixing would imply a smaller upward flux of sigma CO2 and nutrients. Assuming constant productivity, sigma CO2 and nutrients would be more completely used which would imply lower CO2 in these high-latitude surface waters. In areas with a warm surface, a slowing down of the circulation would not have a direct impact on CO2 because productivity would automatically decrease by the same factor as the upwelling rate of nutrients. Studies with a simple box model of the ocean-atmosphere system suggest that a suddent decrease by a factor of 2 of the water exchange between the surface and deep sea in high latitudes could lead to a CO2 decrease of ca. 40 to 50 ppm with a time constant of ca. 200 years. Deep-sea sediment studies indicate rapid changes in the high-latitude surface conditions of the North Atlantic and the Antarctic Oceans at the end of the last glaciation. Studies of carbon isotope ratios should help ascertain whether this proposed mechanism was indeed responsible for the CO2 variation.

Siegenthaler, U.↗
DOE OSTI2022

Designing optimal core–shell MOFs for direct air capture

Metal–organic frameworks (MOFs), along with other novel adsorbents, are frequently proposed as candidate materials to selectively adsorb CO 2 for carbon capture processes. However, adsorbents designed to strongly bind CO 2 nearly always bind H 2 O strongly (sometimes even more so). Given that water is present in significant quantities in the inlet streams of most carbon capture processes, a method that avoids H 2 O competition for the CO 2 binding sites would be technologically valuable. Here, in this paper, we consider a novel core–shell MOF design strategy, where a high-CO 2 -capacity MOF “core” is protected from competitive H 2 O-binding via a MOF “shell” that has very slow water diffusion. We consider a high-frequency adsorption/desorption cycle that regenerates the adsorbents before water can pass through the shell and enter the core. To identify optimal core–shell MOF pairs, we use a combination of experimental measurements, computational modeling, and multiphysics modeling. Our library of MOFs is created from two starting MOFs-UiO-66 and UiO-67-augmented with 30 possible functional group variations, yielding 1740 possible core–shell MOF pairs. After defining a performance score to rank these pairs, we identified 10 core–shell MOF candidates that significantly outperform any of the MOFs functioning alone.

42 ENGINEERING↗
DOE OSTI2021

Developing Upscaling Approach for Swarming Hydraulic Fractures Observed at Hydraulic Fracturing Test Site through Multiscale Simulations

We show that this work aims to address a challenge posed by recent observations of tightly spaced hydraulic fractures in core samples from the hydraulic fracturing test site (HFTS) in the Middle Wolfcamp Formation. Many fractures in retrieved cores have subfoot spacing, which is at odds with conventional models in which usually one hydraulic fracture is initiated per cluster. Models assuming a single fracture at each cluster, although a common practice, often predict excessive fracture propagation that is inconsistent with microseismic observation. Here, we aim to develop a numerical approach to effectively account for densely spaced hydraulic fractures in field-scale simulations. Because it is impractical to explicitly model all aforementioned fractures, we develop a new upscaling law that enables existing simulation tools to predict reservoir response to fracture swarms. The upscaling law is derived based on an energy equivalence argument and validated through multiscale simulations using a high-fidelity code, GEOS. The swarming fractures are first modeled with a spacing that is much smaller than the cluster spacing; these fractures are then approximated by an upscaled, single fracture based on the proposed upscaling law. The upscaled fracture is shown to successfully match the energy input rate and produce the total fracture aperture and average propagation length of the explicitly simulated swarm. Afterward, the upscaling approach is further implemented in 3D field-scale simulations and validated against the HFTS microseismic data of a horizontal well. Our results show that hydraulic fracture swarming can significantly affect fracture propagation behaviors compared with the propagation of single fractures as assumed by conventional modeling approaches. Under the considered situations, the conventional treatment yields fast propagation speed that far exceeds that indicated by the microseismic data. We also illustrate that this discrepancy can be reduced readily through the implementation of the upscaling law. Our results demonstrate the importance of accounting for the fracture swarming effect in field-scale simulations and the efficacy of this approach to enable realistic predictions of reservoir responses to fracture swarms, without the need to model tightly spaced fractures individually.

02 PETROLEUM↗
NASA NTRSDate not supplied

2040 Vision Study: NASA’s T3 Implementation Activities

Over the last few decades, advances in high-performance computing, new materials characterization methods, and, more recently, an emphasis on integrated computational materials engineering (ICME) and additive manufacturing have been a catalyst for multiscale modeling and simulation-based design of materials and structures in the aerospace industry. As a result, NASA’s Transformational Tools and Technology (TTT) Project sponsored a study (performed by a team led by Pratt & Whitney) to define the potential 25-year future state required for integrated multiscale modeling of materials and systems (e.g., load-bearing structures) to accelerate the pace and reduce the expense of innovation in future aerospace and aeronautical systems. This talk will briefly review the findings of this 2040 Vision study (e.g., the 2040 vision state; the required interdependent core technical work areas, Key Element (KE); associated critical gaps and actions to close those gaps; and major recommendations) and discuss NASA’s TTT implementation activities, with special emphasis on recent accomplishments. The study, NASA CR 2018- 219771, envisions the development of a cyber-physical-social ecosystem comprised of experimentally verified and validated computational models, tools, and techniques, along with the associated digital tapestry, that marries two non-mutually exclusive paradigms – “design of the materials” (material scientist viewpoint) and “design with the materials” (structural analyst viewpoint) – into a concurrent transformational paradigm that impacts the entire supply chain to enable cost-effective, rapid, and revolutionary design of fit-for-purpose materials, components, and systems. Although the vision focused on aeronautics and space applications, it is believed that other engineering communities (e.g., automotive, biomedical, etc.) can benefit as well from the proposed framework with only minor modifications. Finally, it is TTT’s hope and desire that this vision provides the strategic guidance to both public and private research and development decision makers to make the proposed 2040 vision state a reality and thereby provide a significant advancement in the United State's global competitiveness

Materials↗
DOE OSTI2026

Identifying Differential Equations in Fourier Domain (FourierIdent)

We investigate identifying differential equations in the frequency domain. Fourier analysis is an important tool in theoretical analysis and numerical solvers of differential equations, yet there is limited work in exploring this connection in the identification of differential equations. This paper aims to identify the underlying differential equation in the frequency domain, from a given single realization of the differential equation perturbed by noise. Such setting imposes difficulties which are different from other identification methods where computation is carried out in the physical domain. We propose several ways to mitigate the challenges arising from noise in data and large differences in the magnitudes of frequency responses. The main takeaways are that identifying differential equations solely in the frequency domain is challenging, the method we propose is based on a form of domain partitions in the frequency domain, and this method shows benefits for complex data even with high level of noise. We introduce a Fourier feature denoising, and define the meaningful data region and the core regions of features to reduce the effect of noise in the frequency domain and to enhance the accuracy in coefficient identification. The proposed method is tested on various differential equations with linear, nonlinear, and high-order derivative feature terms, and shows advantages on complex data with many frequency modes, even under high level of noise.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

CoordNet: Data Generation and Visualization Generation for Time-Varying Volumes via a Coordinate-Based Neural Network

Although deep learning has demonstrated its capability in solving diverse scientific visualization problems, it still lacks generalization power across different tasks. To address this challenge, we propose CoordNet, a single coordinate-based framework that tackles various tasks relevant to time-varying volumetric data visualization without modifying the network architecture. The core idea of our approach is to decompose diverse task inputs and outputs into a unified representation (i.e., coordinates and values) and learn a function from coordinates to their corresponding values. We achieve this goal using a residual block-based implicit neural representation architecture with periodic activation functions. We evaluate CoordNet on data generation (i.e., temporal super-resolution and spatial super-resolution) and visualization generation (i.e., view synthesis and ambient occlusion prediction) tasks using time-varying volumetric data sets of various characteristics. Here, the experimental results indicate that CoordNet achieves better quantitative and qualitative results than the state-of-the-art approaches across all the evaluated tasks. Source code and pre-trained models are available at https://github.com/stevenhan1991/CoordNet.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

DFT Mechanism Studies: Biomimetic 1,4-NADH Chemoselective, Co-factor Regeneration with [Cp*Rh(bpy)H] + , in Tandem with the Biocatalysis Pathways of a Core Model of the (HLADH)-Zn(II) Mediated Enzyme, in the Enantioselective Reduction of Achiral Ketones to Chiral S-Alcohols

In this study, Quantum Chemical (QC) calculations, utilizing Density Functional Theory (DFT), were performed to investigate the mechanistic aspects of the chemoselective catalyzed reaction of [Cp*Rh(bpy)H] + with the biomimetic NAD + analogues, N-benzylnicotinamide triflate, 1, and β-nicotinamide ribose-5'-methyl phosphate, 2, in the conversion to their 1,4-NADH analogues, 1,4-dihydro-N-benzylnicotinamide, 4, and β-1,4-dihydronicotinamide-5'-ribose methyl phosphate, 5. This reaction was in tandem with the 1,4-NADH dependent HLADH-Zn(II)- catalyzed reduction of achiral ketones to chiral S-alcohols. The [Cp*Rh(bpy)H] + complex, and not its equilibrium tautomer, [η 4 -Cp*HRh(bpy)] + , was found to control the hydride transfer during the biomimetic NAD + /1,4-NADH conversion, through the non-covalent interactions of the biomimetic co-factors with [Cp*Rh(bpy)H] + . The thermodynamics and kinetics for the chiral reduction of the Zn(II) bound ketones, 2-pentanone and 4-phenyl-2-butanone, with co-factor, 4, catalyzed by Zn(SCH 3 ) 2 (Imidazole), a core model of the Zn(II)-based catalytic center of HLADH, was also investigated by the evaluation of two possible reaction pathways: (1) formation of a ZnH from the C4-H hydride transfer of co-factor, 4, followed by reaction of the postulated ZnH with the bound 2-pentanone or 4-phenyl-2-butanone substrate, and (2), the direct C4-H transfer to the bound achiral ketone substrates, to provide the dominant chiral alcohols, S-2-pentanol or S-4-phenyl-2-butanol. The latter pathway was found most viable, and DFT calculations also revealed an essential η 2 -coordination of the 5,6 double bond of co-factor, 4, to the HLADH-Zn(II) metal ion center, upon imidazole decomplexation, providing an asymmetric differentiation of S-η 2 -5,6-1,4-NADH-Zn(II) binding. A proposed new paradigm for the Zn(II)'s non-innocent role in the HLADH-Zn(II) biocatalysis reduction mechanism, for enantioselective hydride transfer to a Zn(II) bound ketone, providing S-alcohols.

1,4 NADH co-factors↗
DOE OSTI2020

Coupled Electro-Thermal Analysis of Permanent Magnet Synchronous Motor for Electric Vehicles

Permanent magnet synchronous motors (PMSM) are extensively used in electric vehicles. However, high internal heat generation and inefficient heat dissipation often limit the operational reliability, and longevity of the PMSM. Therefore, proper quantification of heat generation in electric motor and advanced embedded motor cooling techniques remain topics of immense interest. In order to accurately predict electro-magnetic performance, i.e., efficiency, component-wise heat losses and the corresponding temperature distribution of a jacket cooled machine, this paper presents a two-way iteratively coupled electro-thermal modeling framework. Finite element based software Motor-CAD has been utilized for electro-magnetic performance calculation of BMW i3 PMSM. Finite volume based computational fluid dynamics/heat transfer (CFD/HT) software ANSYS® FLUENT® has been employed to simulate the temperature distribution of the PMSM, using the electro-magnetic losses as heat input. Computed heat losses, stator, winding, rotor, and magnet temperatures are utilized as coupling parameters between the electro-magnetic and thermal models. A conventional one-way coupling algorithm has also been developed and compared to the newly proposed two-way coupling algorithm. Numerical results confirm that at high current density, one-way coupling algorithm significantly over-predicts the motor temperature compared to the two-way algorithm. A comprehensive analysis has been carried out to characterize the influences of current density, speed, and forced convection heat transfer coefficient on the heat losses, overall efficiency, and maximum temperature of the PMSM. Lastly, an efficiency map has been interpreted from the coupled electro-magnetic simulation.

42 ENGINEERING↗
DOE OSTI2023

Experimental study on kinetic oxidation of graphite IG-110 by steam

Graphite is proposed for use in High-temperature Gas-cooled Reactors (HTGRs) as the fuel matrix, neutron moderator/reflector, and core structural material. One important property of nuclear grade graphite is their resistance to oxidation in high-temperature environment. Extensive investigation has been performed in the literature for graphite oxidation by air. However, available experimental data are still limited for graphite oxidation by steam under conditions comparable to a postulated steam ingress accident in HTGRs. In this study, the oxidation rate of graphite IG-110 by steam was measured at temperatures from 850 to 1100 °C with the steam partial pressure varying from 0.5 to 20.0 kPa and the hydrogen partial pressure varying from 0 to 2.0 kPa. Further analysis confirms the oxidation process in this present study is dominated by the chemical kinetics, which lends credit to the data for being used to develop numerical models. It was observed that the increase of the kinetic oxidation rate with the steam partial pressure tends to become less apparent if the steam partial pressure keeps increasing. In addition, it was found that the partitioning of hydrogen inhibits the graphite-steam reaction process even with the steam partial pressure up to 20.0 kPa. However, this inhibiting effect starts to become saturated when the hydrogen partial pressure exceeds 1.0 kPa. The oxidation rates were fitted to the conventional Langmuir-Hinshelwood (LH) and Boltzmann-enhanced Langmuir-Hinshelwood (BLH) models by a multivariable optimization algorithm. The BLH model exhibits a better accuracy than the LH model within the specified experimental conditions. The predicted oxidation rate using the BLH model shows a mean relative difference of about 24% with the maximum difference of about 55% when compared with our experimental data.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗