Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “considerations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

TRANSPORTATION CONSIDERATIONS FOR USED FUEL AND ADVANCED NUCLEAR ENERGY TECHNOLOGIES

This study focuses on requirements and challenges pertaining to advanced transportable nuclear energy systems, which are currently in development and feature varying degrees of mobility. These reactors mostly use high-assay low-enriched uranium (HALEU) fuel, and only limited refueling is required during their lifecycles. Due to the smaller source terms, higher burnup fuel, and potentially higher thermal efficiency involved, the waste inventory will be less than that generated by conventional light-water reactors. However, the relevant regulatory requirements must be met when transporting HALEU fuel (whether fresh or used) inside the reactor vessel—mainly the fuel material transportation, siting, and physical protection requirements outlined in US Nuclear Regulatory Commission (NRC) regulations 10 CFR 71 and 73. Spent nuclear fuel (SNF), as well as irradiated fuel (used during any interval of reactor operation), contains highly radioactive materials that generate heat and necessitate special precautions during transportation. This study addresses the challenges that this incurs, and outlines potential solutions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Consideration of Non-Ideal Detonation Regimes Influenced by Wave Modes in a Water-Cooled Rotating Detonation Engine Using OH Chemiluminescence

Within this study, the presence and proportion of ideal and non-ideal combustion regimes is compared across a variety of process conditions and wave modes. Large-scale data analysis seeks to summarize proportional heat release associated with commensal, parasitic, and detonative combustion averaged across individual traces of OH* chemiluminescent data acquired at the detonation plane. Means of regime partitioning based on the anatomy of the time-resolved OH* signal are proposed to ensure consistent analysis throughout the current and future studies concerning combustion regimes.

Johnson, Kristyn↗
DOE OSTI2023

GRAPHITE–MOLTEN SALT CONSIDERATIONS FOR COMPONENTS IN NUCLEAR APPLICATIONS

The new High Temperature Reactor (HTR) designs being considered for future Gen IV nuclear reactor deployment include designs utilizing molten salt as the primary coolant. These molten-salt cooled, graphite core designs pose new material compatibility challenges that are not considered within the gas-cooled HTR designs that have been previously built and operated. While the Molten Salt Reactor Experiment (MSRE) demonstrated that the molten salt can be considered chemically inert to graphite the novel physical and thermal interactions that the molten salt poses may be just as impactful as the chemical reactivity. Specifically, molten salt intrusion into the open pore structure of nuclear graphite grades can provide additional internal stresses within the microstructure exacerbating the stress buildup from irradiation induced dimensional change. Additionally, designs using a molten salt containing liquid fuel could provide “hot spots” within graphite structural components causing local thermal stresses. Abrasion and erosion concerns are magnified with molten salt due to the extremely high density of the salts (some have higher densities than the structural graphite components). Finally, the graphite-graphite and fuel pebble-graphite tribological behavior are distinctly difference within the molten salt from the inert gas environments and must be investigated. These topics and others are currently under investigation within the DOE Advanced Reactor Technologies (ART) graphite program and will be discussed in depth.

Gallego, Nidia↗
DOE OSTI2023

Cybersecurity and the Solar Workforce: Considerations for States

This tool identifies workforce competencies and requisite skill sets for the solar cybersecurity workforce, and highlights tactics that State Energy Offices and Public Utility Commissions can employ to amplify current solar workforce training initiatives and build partnerships that help develop this workforce . It highlights policies and pathways that can foster the growth of solar cybersecurity workforce . Critically, it also identifies internal solar cyber expertise that State Energy Offices and Public Utility Commissions should consider to further develop their roles and responsibilities in this space

14 SOLAR ENERGY↗
DOE OSTI2023

Cybersecurity Considerations for State Procurement of Solar Assets

This tool provides an overview of existing procurement programs and example language that prioritizes cybersecurity language and references that can readily be applied to state solar cybersecurity practices . The tool also identifies sample language for procurement agreements, contracts, and grants which can serve as lower entry points for state officials interested in pursuing this subject matter more immediately. As this approach may be novel for many states, the information therein should be considered as a model only . The programs and example language included are not exhaustive and should be evaluated in accordance with state processes and policies .

14 SOLAR ENERGY↗
DOE OSTI2024

Equity Considerations for Renewable Energy Technologies in Alaska Offshore Waters

For many Alaskan communities, access to resilient, affordable, sustainable, and clean energy resources are top among the solutions they will need to help them navigate their changing landscape. The Bureau of Ocean Energy Management funded the National Renewable Energy Laboratory to conduct a feasibility study to examine the potential for renewable energy technologies in Alaska offshore waters (with a focus on waters that are under BOEM's purview, the Outer Continental Shelf). With unprecedented investments from the federal government in bolstering resiliency in rural, remote and disadvantaged communities, renewable energy development in Alaska offshore waters could very well become a reality within the next two decades.

community resilience↗
DOE OSTI2023

Leveraging Single-Page Applications for Seamless Scientific Workflows: DevSecOps Considerations

Single-page applications (SPAs) have become indispensable in modern frontend development, with widespread adoption in scientific applications. The process of creating a single-page web application development environment which accurately reflects the production environment isn’t always straightforward. Most SPA build systems assume configuration at build time, while DevSecOps engineers prefer runtime configuration. This paper suggests a framework-agnostic approach to address issues that encompass both development and deployment, but are difficult to tackle without knowledge in both domains.

Drane, Lance↗
DOE OSTI2022

Consideration of alternative coolants in AGR-like FHR designs

Replacing carbon-dioxide coolant in AGR-like reactor with molten salt significantly affects the reactor performance characteristics. Hence, a new core design is needed. In this work, a Multi-Objective Particle Swarm Optimisation is used to identify the most favourable configurations for a new system layout. The performed analysis examines each configuration with respect to its thermal-hydraulic performance to assess the power uprate potential which is limited by multiple temperature constraints (e.g. fuel centreline and cladding temperatures as well as the coolant freezing/boiling). The estimated maximum power was then used in the fuel burnup calculations, from which a discharge burnup and cycle average Coolant Temperature Coefficients (CTC) were obtained. As a result of the optimisation process, several families of possible solutions were identified, which form an optimal Pareto Front. The most attractive configurations in terms of achievable power density, however, were not necessarily on the Pareto front. Several coolant options are examined and compared in this paper. The newly identified design options have the potential to achieve power density that is higher than that of a typical AGR by up to a factor of five while maintaining negative CTC through the burnup cycle. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2024

Converting Poly(ethylene terephthalate) to Rigid Thermosets: Performance and Recycling Considerations

Poly(ethylene terephthalate) (PET) is one of today's most ubiquitous plastics finding predominant uses in textiles and food applications. Due to its prolific implementation, PET already possesses a robust mechanical recycling infrastructure; however, current requirements for mechanical recycling still leads to an underutilization of PET. Thus, to keep carbon in the economy and further encourage decarbonization efforts it is paramount to find other applications for PET. In the present work, PET is converted to thermoset applications, specifically those relevant to fiber reinforced plastics. In one case, bioderived monomers are utilized to convert glycolyzed PET into unsaturated polyesters resins which can possess better thermomechanical performance than their petrochemical counterpart while also emitting less GHG emissions in their manufacture. In the second case, the constituent monomers from PET are converted into epoxies and reacted with either amines or anhydrides to form thermoset networks. When anhydrides are implemented alongside carboxylate-based epoxies, 100% monomer recyclability is obtainable. Meanwhile, when amines are used, performance of the materials can be enhanced at the sacrifice of some recyclability. Overall, this work demonstrates the potential to further incentivize the reclamation of materials through multiple second life applications in pursuance of maintaining carbon in today's material economy.

BIOMASS FUELS,ENVIRONMENTAL SCIENCES↗