Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “component effect directions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Evaluation of Property Methods for Modeling Direct-Supercritical CO2 Power Cycles

Direct supercritical CO2 (sCO2) power cycles combust natural gas or syngas with oxygen in a high pressure, heavily diluted sCO2 environment, and are an efficient and potentially cost-effective method of capturing CO2 from fossil-fueled power plants. The cycle thermal efficiency varies with the proximity of the operating conditions to the CO2 critical point, as well as to the level of working fluid dilution by minor components, thus it is crucial to correctly model the thermo-physical properties of these sCO2 mixtures. This presentation includes a quantitative evaluation of ten different property methods that can be used for modeling direct sCO2 cycles in Aspen Plus. These property methods are assessed against several mixture property measurements and offer a relative comparison to the accuracy obtained with REFPROP, the standard for analyzing high purity indirect sCO2 systems. The Lee-Kessler-Plocker Equation of State is recommended if REFPROP cannot be used.

Weiland, Nathan↗

Evaluation of idealized large-eddy simulations performed with the Weather Research and Forecasting model using turbulence measurements from a 250 m meteorological mast

Abstract. We investigate the ability of the Weather Research and Forecasting model to perform large-eddy simulation of canonical flows. This is achieved through comparison of the simulation outputs with measurements from sonic anemometers on a 250 m meteorological mast located at Østerild, in northern Denmark. Østerild is on a flat and rough area, and for the predominant wind directions, the atmospheric flow can be considered to be close to homogeneous. The idealized simulated flows aim at representing atmospheric boundary layer turbulence under unstable, neutral, and stable stability conditions at the surface, which are statistically significant conditions observed at Østerild. We found that the resolved fields from the simulations appear to have the characteristics of the three stability regimes. Vertical profiles of observed mean wind speeds and direction are well reproduced by the simulations, with the largest differences under near-neutral conditions, where the effect of the subgrid-scale model is evident on the vertical wind shear close to the surface. Vertical profiles of observed eddy fluxes are also well reproduced by the simulations, with the largest differences for the three velocity component variances under stable stability conditions, although nearly always within the observed variability. With regards to turbulent kinetic energy, we find good agreement between observations and simulations at all vertical levels. Simulated and observed velocity spectra match very well and show very similar behavior with height and with atmospheric stability within the low-frequency interval; at the effective resolution, the simulated spectra show the typical drop-off of finite differences. Our findings demonstrate that these idealized simulations reproduce the characteristics of atmospheric stability regimes often observed at a high turbulent and flat site within a direction sector, where the air flows over nearly homogeneous land.

17 WIND ENERGY↗

Nanoscale optical nonreciprocity with nonlinear metasurfaces

Optical nonreciprocity is manifested as a difference in the transmission of light for the opposite directions of excitation. Nonreciprocal optics is traditionally realized with relatively bulky components such as optical isolators based on the Faraday rotation, hindering the miniaturization and integration of optical systems. Here we demonstrate free-space nonreciprocal transmission through a metasurface comprised of a two-dimensional array of nanoresonators made of silicon hybridized with vanadium dioxide (VO 2 ). This effect arises from the magneto-electric coupling between Mie modes supported by the resonator. Nonreciprocal response of the nanoresonators occurs without the need for external bias; instead, reciprocity is broken by the incident light triggering the VO 2 phase transition for only one direction of incidence. Nonreciprocal transmission is broadband covering over 100 nm in the telecommunication range in the vicinity of λ = 1.5 µm. Each nanoresonator unit cell occupies only ~0.1 λ 3 in volume, with the metasurface thickness measuring about half-a-micron. Our self-biased nanoresonators exhibit nonreciprocity down to very low levels of intensity on the order of 150 W/cm 2 or a µW per nanoresonator. We estimate picosecond-scale transmission fall times and sub-microsecond scale transmission rise. Our demonstration brings low-power, broadband and bias-free optical nonreciprocity to the nanoscale.

42 ENGINEERING↗

Evaluation of Property Methods for Modeling Direct-Supercritical CO2 Power Cycles

Direct supercritical CO2 (sCO2) power cycles combust natural gas or syngas with oxygen in a high pressure, heavily-diluted sCO2 environment, and are an efficient and potentially cost-effective method of capturing CO2 from fossil-fueled power plants. The cycle thermal efficiency varies with the proximity of the operating conditions to the CO2 critical point, as well as to the level of working fluid dilution by minor components, thus it is crucial to correctly model the thermo-physical properties of these sCO2 mixtures. This paper presents a quantitative evaluation of ten different property methods that can be used for modeling direct sCO2 cycles in Aspen Plus. These property methods are assessed against several mixture property measurements, and offer a relative comparison to the accuracy obtained with REFPROP, the standard for analyzing high purity indirect sCO2 systems. The Lee-Kessler-Plocker Equation of State is recommended if REFPROP cannot be used.

direct sCO2↗

Modeling Failure of Electrical Transformers due to Effects of a HEMP Event

Understanding the effect of a high-altitude electromagnetic pulse (HEMP) on the equipment in the United States electrical power grid is important to national security. A present challenge to this understanding is evaluating the vulnerability of transformers to a HEMP. Evaluating vulnerability by direct testing is cost-prohibitive, due to the wide variation in transformers, their high cost, and the large number of tests required to establish vulnerability with confidence. Alternatively, material and component testing can be performed to quantify a model for transformer failure, and the model can be used to assess vulnerability of a wide variety of transformers. This project develops a model of the probability of equipment failure due to effects of a HEMP. Potential failure modes are cataloged, and a model structure is presented which can be quantified by the results of small-scale coupon tests.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Evaluation of Directed Energy Deposition and Laser Powder Bed Fusion Nickel-Based Alloys Process Application Envelopes Based on Performance, Process Economics, Supply Chain Risks, and Reactor-Specific Targeted Components

The goal of the Advanced Materials and Manufacturing Technologies (AMMT) program is to accelerate the deployment of new materials and manufacturing technologies into advanced nuclear-related systems. Although 316H stainless steel fabricated by laser powder bed fusion (LPBF) has already been identified as an alloy that could have a significant effect on various reactor technologies, many other materials and manufacturing techniques are being evaluated. Nickel-based alloys typically offer higher-temperature capabilities compared with advanced stainless steels, and previous reports looked at three Ni-based alloy categories: low-Co alloys with a potential use close to the reactor core; high-temperature, high-strength alloys; and molten salt–compatible alloys. Due to the increasing interest in the low Co 625 alloy for nuclear applications, the alloy was compared at the Oak Ridge National Laboratory (ORNL) with 617, 230, two high-temperature, high-strength solution-strengthened alloys. Hot cracking could not be suppressed for alloy 230, and it was shown that these cracks, which were elongated along the build direction (BD), had a drastic effect on the ductility of alloy 230 at room temperature when specimens were machined perpendicular to the BD. Cracking was not as significant for alloy 617, but still led to significant variation in ductility at room temperature along the build direction. On the contrary, LPBF printing of crack-free alloy 625 was achieved using similar printing parameters, and the alloy looks like a very promising candidate for various reactor technologies.

36 MATERIALS SCIENCE↗

An exploration of Lasnex designs to support the MShock campaign at NIF

In support of planned MShock experiments at NIF, Lasnex is being used to explore possible laser sources and halfraum designs that launch two shocks into an ablator - shock tube configuration. Two design features were investigated: (1) launching a two-component laser source consisting of an early pre-pulse separated in time from a later main pulse, to create two shocks, and (2) adding a liner on the inner surface of the gold wall of the halfraum, to delay or prevent gold stagnation on-axis and to preserve the effectiveness of the second laser pulse. The clearest indication of two shocks propagating in the shock tube occurred when the pre-pulse mimicked a direct drive, achieved by re-pointing the inner beam cones, and when a liner was used to ensure that the free-electron number density was below the critical density for NIF. Additional simulations (presented in the Appendix) that used the two-component laser source but focused on specific choices in laser-pulse design space, as proposed by Kirk Flippo for use in the first MShock experiments at NIF, also demonstrated the presence of two shocks.

42 ENGINEERING↗

Galactic cosmic rays and anomalous components in the heliosphere

The progress made during 1983-1986 by U.S scientists on modulation of Galactic cosmic rays by the sun and on the origin, acceleration, and modulation of the anomalous components in the heliosphere is reviewed. In these years, simultaneous observations of modulation, covering a radial range from 1 to more than 30 AU and a heliospheric latitude range from 0 to greater than 20 deg, made it possible to investigate directly the dynamics and spatial scale of modulation during both the increasing and declining phases of solar activity and to make in situ correlations between changes in the interplanetary medium and changes in the modulation of cosmic rays. Particular attention is given to the use of the observations related to time-dependent modulation effects, curvature drifts, and anomalous components, as well as of the measurements of the cosmic-ray radial gradients and latitudinal intensity variations, in the modeling of solar modulation effects.

Mckibben, R. B.↗

Characterization of Spent Purolite A530E Resin with Implications for Long-Term Radioactive Contaminant Removal

Direct removal of pertechnetate anion (TcO4-) from the subsurface contaminated plumes at legacy nuclear weapons production sites, is effective remediation strategy to prevent their spread to adjacent aquifers but is also challenging because TcO4- is a trace component of the contaminated groundwater typically containing large access of other anionic constituents, such nitrate, sulfate, chloride and others. It can be achieved through ion exchange treatment using Purolite A530E resin which to date however has only been evaluated under laboratory conditions and many questions regarding its long-term operational performance remain. To address this need, here we report comprehensive characterization of the spent Purolite A530E resin which processed over 5.38x109 L of contaminated groundwater and successfully removed about 3.78 Ci of Tc-99 during four years of operation at the 200 West Pump & Treat facility at the US DOE Hanford site. This Tc-99 loading constitutes however only about 0.034% of the theoretical capacity of the resin which retained significant amounts of sulfate. Among other radioactive contaminants, small quantities of U-238, Co-60, and I-129 were retained by the resin. The total loading of iodine (combined 1-127 and I-129) on the spent resin exceeded that of Tc-99. To elucidate the mechanism of iodine retention, ion exchange behavior of iodide and iodate was investigated. Purolite A530E resin exhibited highly efficient uptake of iodide and only moderate affinity for iodate in accord with their Gibbs energy of hydration. Sorption isotherms for both anions obeyed Freundlich model.

Levitskaia, Tatiana G.↗

Variable density mixing in turbulent jets with coflow

Two sets of experiments are performed to study variable-density effects in turbulent round jets with co flow at density ratios, s = 4.2 and s = 1.2. 10,000 instantaneous realisations of simultaneous 2-D PIV and PLIF at three axial locations in the momentumdominated region of the jet allow us to calculate the full t.k.e. budgets, providing insights into the mechanisms of density fluctuation correlations both axially and radially in a non- Boussinesq flow. The strongest variable-density effects are observed within the velocity half-width of the jet, r ~u 1/2 . Variable density effects decrease the Reynolds stresses via increased turbulent mass flux in the heavy jet, as shown by previous jet centreline measurements. Radial pro les of turbulent flux show that in the lighter jet t.k.e. is moving away from the centreline, while in the heavy jet it is being transported both inwards towards the centreline and radially outwards. Negative t.k.e. production is observed in the heavy jet, and we demonstrate that this is caused by both reduced gradient stretching in the axial direction and increased turbulent mass fluxes. Large differences in advection are also observed between the two jets. The air jet has higher total advection caused by strong axial components, while density fluctuations in the heavy jet reduce the axial advection signi cantly. The budget mechanisms in the non-Boussinesq regime are best understood using effective density and velocity half-width, ρeff ¯u 3 1 ,CL/r ~u 1/2,eff , a modi cation of previous scaling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Impact of plasma poloidal rotation on resistive wall mode instability in toroidally rotating plasmas

Stability of resistive wall mode (RWM) is investigated in a cylindrical plasma and an axisymmetric toroidal plasma by taking into account not only toroidal rotation but also poloidal rotation. Since the Doppler shifted frequency is responsible for the RWM stability, the modification of this Doppler shifted frequency by poloidal rotation affects the rotation effect on RWM. When a poloidal rotation frequency is not so large, the effect of poloidal rotation on the RWM stability can be approximately treated with the modified toroidal rotation frequency. In a toroidal plasma, this modified frequency is determined by subtracting a toroidal component of the rotation parallel to the magnetic field from the toroidal rotation frequency. The poloidal rotation that counteracts the effect of the Doppler shift strongly reduces the stabilizing effect of toroidal rotation, but by changing the rotational direction, the poloidal rotation enhances this stabilizing effect. This trend is confirmed in not only a cylindrical plasma but also a toroidal plasma. This result indicates that poloidal rotation produces the dependence of the critical toroidal rotation frequency for stabilizing RWM on the rotational direction of toroidal rotation in the same magnetic configuration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Impact of interplay between magnetic field, transformation strain, and coarsening on variant selection in L1{sub 0}-type FePd

Variant selection of L1{sub 0}-type ferromagnetic alloys has been numerically investigated using the phase-field modeling, to clarify the phenomena at greater temporal and spatial resolution and to reveal the underlying mechanism. The duration for which the external magnetic field is effective is found to be very short, and variant selection is significantly affected by not only direct response to the external magnetic field but also their interplay between the field, intrinsic transformation strain, and various thermodynamic energy components involved in the course of microstructure evolution. The detailed mechanism of the interplay was quantitatively analyzed in terms of the driving force for the variant selection, by partitioning it into the various energy components. Careful examination of the variant selection at the very early stage revealed that the slight difference in size and configuration of variants during disorder-to-order transition realized by the interplay between transformation strain and external field is essentially needed before proceeding to the latter stage of the variant selection driven by interface energy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The EBLM project – IX. Five fully convective M-dwarfs, precisely measured with CHEOPS and TESS light curves

ABSTRACT Eclipsing binaries are important benchmark objects to test and calibrate stellar structure and evolution models. This is especially true for binaries with a fully convective M-dwarf component for which direct measurements of these stars’ masses and radii are difficult using other techniques. Within the potential of M-dwarfs to be exoplanet host stars, the accuracy of theoretical predictions of their radius and effective temperature as a function of their mass is an active topic of discussion. Not only the parameters of transiting exoplanets but also the success of future atmospheric characterization relies on accurate theoretical predictions. We present the analysis of five eclipsing binaries with low-mass stellar companions out of a subsample of 23, for which we obtained ultra-high-precision light curves using the CHEOPS satellite. The observation of their primary and secondary eclipses are combined with spectroscopic measurements to precisely model the primary parameters and derive the M-dwarfs mass, radius, surface gravity, and effective temperature estimates using the PYCHEOPS data analysis software. Combining these results to the same set of parameters derived from TESS light curves, we find very good agreement (better than 1 per cent for radius and better than 0.2 per cent for surface gravity). We also analyse the importance of precise orbits from radial velocity measurements and find them to be crucial to derive M-dwarf radii in a regime below 5 per cent accuracy. These results add five valuable data points to the mass–radius diagram of fully convective M-dwarfs.

Sebastian, D. (ORCID:0000000222149258)↗

Energy gain of an electron by a laser pulse in the presence of radiation reaction

A well-known no-energy-gain theorem states that an electron cannot gain energy when being overrun by a plane (transverse) laser pulse of finite length. The theorem is based on symmetries which are broken when radiation reaction (RR) is included. It is shown here that an electron, e.g., being initially at rest, will gain a positive velocity component in the laser propagation direction after being overrun by an intense laser pulse (of finite duration and with intensity of order 5x10{sup 22} W/cm{sup 2} or larger). The velocity increment is due to RR effects. The latter are incorporated in the Landau-Lifshitz form. Both linear as well as circular polarization of the laser pulse are considered. It is demonstrated that the velocity gain is proportional to the pulse length and the square of the peak amplitude of the laser pulse. The results of numerical simulations are supported by analytical estimates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Event-related brain potentials reveal how multiple aspects of semantic processing unfold across parafoveal and foveal vision during sentence reading

Recent event–related brain potential (ERP) experiments have demonstrated parafoveal N400 expectancy and congruity effects, showing that semantic information can be accessed from words in parafoveal vision (a conclusion also supported by some eye–tracking work). At the same time, it is unclear how higher–order integrative aspects of language comprehension unfold across the visual field during reading. In the current study, we recorded ERPs in a parafoveal flanker paradigm, while readers were instructed to read passively for comprehension or to judge the plausibility of sentences in which target words varied in their semantic expectancy and congruity. We directly replicated prior work showing graded N400 effects for parafoveal viewing, which are then not duplicated when the target words are processed foveally. Critically, although N400 effects were not modulated by task goals, a posteriorly distributed late positive component thought to reflect semantic integration processes was observed to semantic incongruities only in the plausibility judgment task. Furthermore, this effect was observed at a considerable delay, appearing only after words had moved into foveal vision. Our findings thus suggest that semantic access can be initiated in parafoveal vision, whereas central foveal vision may be necessary to enact higher–order (and task–dependent) integrative processing.

60 APPLIED LIFE SCIENCES↗

Low-Mass Dark Matter Search Results and Radiogenic Backgrounds for the Cryogenic Dark Matter Search

An ever-increasing amount of evidence suggests that approximately one quarter of the energy in the universe is composed of some non-luminous, and hitherto unknown, “dark matter”. Physicists from numerous sub-fields have been working on and trying to solve the dark matter problem for decades. The common solution is the existence of some new type of elementary particle with particular focus on weakly interacting massive particles (WIMPs). One avenue of dark matter research is to create an extremely sensitive particle detector with the goal of directly observing the interaction of WIMPs with standard matter. The Cryogenic Dark Matter Search (CDMS) project operated at the Soudan Underground Laboratory from 2003–2015, under the CDMS II and SuperCDMS Soudan experiments, with this goal of directly detecting dark matter. The next installation, SuperCDMS SNOLAB, is planned for near-future operation. The reason the dark-matter particle has not yet been observed in traditional particle physics experiments is that it must have very small cross sections, thus making such interactions extremely rare. In order to identify these rare events in the presence of a background of known particles and interactions, direct detection experiments employ various types and amounts of shielding to prevent known backgrounds from reaching the instrumented detector(s). CDMS utilized various gamma and neutron shielding to such an effect that the shielding, and other experimental components, themselves were sources of background. These radiogenic backgrounds must be understood to have confidence in any WIMP-search result. For this dissertation, radiogenic background studies and estimates were performed for various analyses covering CDMS II, SuperCDMS Soudan, and SuperCDMS SNOLAB. Lower-mass dark matter t c2 inent in the past few years. The CDMS detectors can be operated in an alternative, higher-biased, mode v to decrease their energy thresholds and correspondingly increase their sensitivity to low-mass WIMPs. This is the CDMS low ionization threshold experiment (CDMSlite), which has pushed the frontier at lower WIMP masses. This dissertation describes the second run of CDMSlite at Soudan: its hardware, operations, analysis, and results. The results include new WIMP mass-cross section upper limits on the spin-independent and spin-dependent WIMP-nucleon interactions. Thanks to the lower background and threshold in this run compared to the first CDMSlite run, these limits are the most sensitive in the world below WIMP masses of ⇠4 GeV/c2. This demonstrates also the great promise and utility of the high-voltage operating mode in the SuperCDMS SNOLAB experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Modelling Thermodynamics of Alloys for Fusion Application

This research has two main objectives: (1) The development of computational tools to evaluate alloy properties, using the information contained in thermodynamic functions. We aim at improving the ability of classical potentials to account for complex alloy behavior, and (2) The application of these tools to predict properties of alloys under irradiation, in particular the FeCr system. This semester has been very productive in the developments of both tools and algorithms. Our work aims at developing theoretical and numerical methodologies that are directly applicable to multi-scale modeling addressing the specific issues related to multi-component, multi-phase systems in non-equilibrium states, such as solid-solution hardening, point defect-solute interactions, stoichiometry effects, static and dynamic strain aging, dislocation-solute interactions, and in general the aspects of microstructure evolution that are affected by irradiation. At its present stage of development, we have been able to predict numerous thermodynamic properties of FeCr mainly related to ordering and precipitation; we have found new intermetallic phases and suggested the existence of a dependence of the solubility limit on the degree of order of the alloy. At present, we are studying dislocation mobility in the solid solution and the heterogeneous phase, and we are developing a new algorithm to perform Monte Carlo simulations inside the miscibility gap, a technique that will allow us to study interfacial energies and nucleation sizes. We develop a strategy to model radiation damage in FeCr alloys, system in which magnetism introduces an anomaly in the heat of formation of the solid solution that is at the basis of its unique behavior. Magnetism has implications for the precipitation of excess Cr in the a phase in the presence of heterogeneities. These complexities pose many challenges for atomistic (empirical) methods. To address such issues we develop a modified, many-body potential by rigorously fitting thermodynamic properties, including free energy. Multi-million atom displacement Monte Carlo simulations in the transmutation ensemble, using both our new potential and our new MC code, are able to predict properties of non equilibrium processes like heterogeneous precipitation, and dislocation - precipitate interactions, enabling the study of hardening and embrittlement under irradiation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Study of design and control of remote manipulators. Part 2: Vibration considerations in manipulator design

An investigation is reported involving a mathematical procedure using 4 x 4 transformation matrices for analyzing the vibrations of flexible manipulators. Previous studies with the procedure are summarized and the method is extended to include flexible joints as well as links, and to account for the effects of various power transmission schemes. A systematic study of the allocation of structural material and the placement of components such as motors and gearboxes was undertaken using the analytical tools developed. As one step in this direction the variables which relate the vibration parameters of the arm to the task and environment of the arm were isolated and nondimensionalized. The 4 x 4 transformation matrices were also used to develop analytical expressions for the terms of the complete 6 x 6 compliance matrix for the case of two flexible links joined by a rotating joint, flexible about its axis of rotation.

Book, W. J.↗