SEARCH · Engineering Papers

Results for “circular data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Mars Observer orbit determination analysis

Results are presented of a simulated orbit determination analysis for three phases of the Mars Observer mission (interplanetary cruise, orbit insertion, and mapping), together with a summary of orbital accuracies throughout the Mars Observer mission. The plan for achieving the navigation objectives of the Mars Observer mission is described. These objectives are to navigate the Mars Observer spacecraft to Mars and achieve accurate targeting at Mars; to propulsively maneuver the spacecraft into a 3-day period, capture orbit; to navigate the spacecraft into a 1.96-hr period low-altitude, nearly circular mapping orbit; and to maintain Mars Observer in the mapping orbit throughout the 687 days devoted for scientific data acquisition. Factors that will affect the spacecraft during each of the three phases are discussed.

Esposito, Pasquale↗

NASA NTRS1992

Analysis of multifastener composite joints

A new numerical procedure for determining load proportioning in multiple-hole mechanical joints in composite plates is presented. The joints are loaded in double lap fashion in tension with pins through the holes. The commercial finite-element program ABAQUS is used to predict the load proportioning among holes using two independent plane stress finite-element models, one representing the composite inner lap and one representing the two steel outer laps, interacting through rigid circular surfaces. The circular surfaces effectively represent rigid pins. Load proportioning is predicted for a number of geometries. Excellent correlation with experimental data is obtained. Experimental and computed surface strains are also found to compare well. The assumption of a radial cosine distribution of contact stress between pin and hole is shown to be substantially in error for some holes.

Griffin, O. H., Jr.↗

NASA NTRS1993

Mobile antenna development at JPL

The Jet Propulsion Laboratory (JPL), under the sponsorship of NASA, has pioneered the development of land vehicle antennas for commercial mobile satellite communications. Several novel antennas have been developed at L-band frequencies for the Mobile Satellite (MSAT) program initiated about a decade ago. Currently, two types of antennas are being developed at K- and Ka-band frequencies for the ACTS (Advanced Communications Technology Satellite) Mobile Terminal (AMT) project. For the future, several hand-held antenna concepts are proposed for the small terminals of the Ka-band Personal Access Satellite System (PASS). For the L-band MSAT program, a number of omni-directional low-gain antennas, such as the crossed drooping-dipoles, the higher-order-mode circular microstrip patch, the quadrifilar helix, and the wrapped-around microstrip 'mast' array, have been developed for lower data rate communications. Several medium-gain satellite tracking antennas, such as the electronically scanned low-profile phased array, the mechanically steered tilted microstrip array, the mechanically steered low-profile microstrip Yagi array, and the hybrid electronically/mechanically steered low-profile array, have been developed for the MSAT's higher data rate and voice communications. To date, for the L-band vehicle application, JPL has developed the world's lowest-profile phased array (1.8 cm height), as well as the lowest-profile mechanically steered antenna (3.7 cm height). For the 20/30 GHz AMT project, a small mechanically steered elliptical reflector antenna with a gain of 23 dBi has recently been developed to transmit horizontal polarization at 30 GHz and receive vertical polarization at 20 GHz. Its hemispherical radome has a height of 10 cm and a base diameter of 23 cm. In addition to the reflector, a mechanically steered printed MMIC active array is currently being developed to achieve the same electrical requirements with a low profile capability. These AMT antenna developments, along with other Ka-band technologies, will lead to the development of several compact hand-held terminals for the PASS program. A few antenna concepts, such as the lap-top or desk-top terminal's printed array, the hand-held phased array, and the head-mounted low-profile array, have been proposed to achieve a future vision for the personal access communications system.

Huang, J.↗

NASA NTRS1992

Spatial region filtering in IRAF/PROS

In order to analyze x ray data, it is nearly always necessary to extract source and background events from a data set. Typically, this is done by defining geometric spatial regions of the data set to describe the source and background. For example, one might wish to extract source events from a circular or elliptical region centered at a particular pixel, and background events from a circular or elliptical annulus whose inner radius matches the source region. At the same time, it might be necessary to exclude one or more nearby sources from the source or background region in question. Thus, it might be necessary to define a pie-shaped region or even an entirely irregularly-shaped region to exclude. A spatial filtering scheme called REGIONS was implemented in IRAF/PROS to support these and other types of spatial region extraction. It allows users to create a spatial mask by specifying one or more ASCII geometric shape descriptors (box, circle, ellipse, pie, point, annulus, and polygon) as regions to be included or excluded in the mask. In addition, two or more shapes can be combined using Boolean algebra to create an infinite variety of sophisticated regions. Each geometric shape has a specific set of parameters that describe that shape. For example, a circle is described by a center and a radius, while a box is described by a center, length, width, and rotation angle. These quantities can be specified in units of pixels or, in cases where the target image contains world coordinate system information, they can be described in units such as RA and Dec. Users can create region mask files by feeding an ASCII region descriptor to the IRAF/PROS plcreate task. Temporary masks can also be created from ASCII region descriptors by individual applications that call the routines in the region creation library. This library implements a yacc-based region parser that compiles the ASCII descriptors into 'software CPU' instructions which are then executed to create the mask. The mask created from these region descriptors is a standard IRAF PLIO mask. It can be combined with other PLIO masks (e.g., exposure masks) to provide complete spatial filtering capabilities. The capabilities of the region filtering scheme are described. It also discusses the design philosophy guiding our work, as well as our plans for the future.

Mandel, Eric↗

NASA NTRS1995

Electrically heated tube investigation of cooling channel geometry effects

The results of an experimental investigation on the combined effects of cooling channel aspect ratio and curvature for rocket engines are presented. Symmetrically heated tubes with average heat fluxes up to 1.7 MW/m(exp 2) were used. The coolant was gaseous nitrogen at an inlet temperature of 280 K (500 R) and inlet pressures up to 1.0 x 10(exp 7) N/m(exp 2) (1500 psia). Two different tube geometries were tested: a straight, circular cross-section tube, and an aspect-ratio 10 cross-section tube with a 45 deg bend. The circular tube results are compared to classical models from the literature as validation of the system. The curvature effect data from the curved aspect-ratio 10 tube compare favorably to the empirical equations available in the literature for low aspect ratio tubes. This latter results suggest that thermal stratification of the coolant due to diminished curvature effect mixing may not be an issue for high aspect-ratio cooling channels.

Meyer, Michael L.↗

NASA NTRS2002

Generalized Reliability Methodology Applied to Brittle Anisotropic Single Crystals

A generalized reliability model was developed for use in the design of structural components made from brittle, homogeneous anisotropic materials such as single crystals. The model is based on the Weibull distribution and incorporates a variable strength distribution and any equivalent stress failure criteria. In addition to the reliability model, an energy based failure criterion for elastically anisotropic materials was formulated. The model is different from typical Weibull-based models in that it accounts for strength anisotropy arising from fracture toughness anisotropy and thereby allows for strength and reliability predictions of brittle, anisotropic single crystals subjected to multiaxial stresses. The model is also applicable to elastically isotropic materials exhibiting strength anisotropy due to an anisotropic distribution of flaws. In order to develop and experimentally verify the model, the uniaxial and biaxial strengths of a single crystal nickel aluminide were measured. The uniaxial strengths of the <100> and <110> crystal directions were measured in three and four-point flexure. The biaxial strength was measured by subjecting <100> plates to a uniform pressure in a test apparatus that was developed and experimentally verified. The biaxial strengths of the single crystal plates were estimated by extending and verifying the displacement solution for a circular, anisotropic plate to the case of a variable radius and thickness. The best correlation between the experimental strength data and the model predictions occurred when an anisotropic stress analysis was combined with the normal stress criterion and the strength parameters associated with the <110> crystal direction.

Salem, Jonathan A.↗

NASA NTRS2013

Net Shape Spin Formed Cryogenic Aluminum Lithium Cryogenic Tank Domes for Lower Cost Higher Performance Launch Vehicles

With the goal of lower cost (simplified manufacturing and lower part count) and higher performance (higher strength to weight alloys) the NASA Technical Maturation Program in 2006 funded a proposal to investigate spin forming of space launch vehicle cryogenic tank domes. The project funding continued under the NASA Exploration Technology Development Program through completion in FY12. The first phase of the project involved spin forming of eight, 1 meter diameter "path finder" domes. Half of these were processed using a concave spin form process (MT Aerospace, Augsburg Germany) and the other half using a convex process (Spincraft, Boston MA). The convex process has been used to produce the Ares Common Bulkhead and the concave process has been used to produce dome caps for the Space Shuttle light weight external tank and domes for the NASDA H2. Aluminum Lithium material was chosen because of its higher strength to weight ratio than the Aluminum 2219 baseline. Aluminum lithium, in order to obtain the desired temper (T8), requires a cold stretch after the solution heat treatment and quench. This requirement favors the concave spin form process which was selected for scale up. This paper describes the results of processing four, 5.5 meter diameter (upper stage scale) net shaped spin formed Aluminum Lithium domes. In order to allow scalability beyond the limits of foundry and rolling mills (about 12 foot width) the circular blank contained one friction stir weld (heavy lifter scales require a flat blank containing two welds). Mechanical properties data (tensile, fracture toughness, stress corrosion, and simulated service testing) for the parent metal and weld will also be discussed.

Curreri, Peter A.↗

NASA NTRS2012

NASA Tech Briefs, October 2012

Topics discussed include: Detection of Chemical Precursors of Explosives; Detecting Methane From Leaking Pipelines and as Greenhouse Gas in the Atmosphere; Onboard Sensor Data Qualification in Human-Rated Launch Vehicles; Rugged, Portable, Real-Time Optical Gaseous Analyzer for Hydrogen Fluoride; A Probabilistic Mass Estimation Algorithm for a Novel 7-Channel Capacitive Sample Verification Sensor; Low-Power Architecture for an Optical Life Gas Analyzer; Online Cable Tester and Rerouter; A Three-Frequency Feed for Millimeter-Wave Radiometry; Capacitance Probe Resonator for Multichannel Electrometer; Inverted Three-Junction Tandem Thermophotovoltaic Modules; Fabrication of Single Crystal MgO Capsules; Inflatable Hangar for Assembly of Large Structures in Space; Mars Aqueous Processing System; Hybrid Filter Membrane; Design for the Structure and the Mechanics of Moballs; Pressure Dome for High-Pressure Electrolyzer; Cascading Tesla Oscillating Flow Diode for Stirling Engine Gas Bearings; Compact, Low-Force, Low-Noise Linear Actuator; Ultra-Compact Motor Controller; Extreme Ionizing-Radiation-Resistant Bacterium; Wideband Single-Crystal Transducer for Bone Characterization; Fluorescence-Activated Cell Sorting of Live Versus Dead Bacterial Cells and Spores; Nonhazardous Urine Pretreatment Method; Laser-Ranging Transponders for Science Investigations of the Moon and Mars; Ka-Band Waveguide Three-Way Serial Combiner for MMIC Amplifiers; Structural Health Monitoring with Fiber Bragg Grating and Piezo Arrays; Low-Gain Circularly Polarized Antenna with Torus-Shaped Pattern; Stereo and IMU- Assisted Visual Odometry for Small Robots; Global Swath and Gridded Data Tiling; GOES-R: Satellite Insight; Aquarius iPhone Application; Monitoring of International Space Station Telemetry Using Shewhart Control Charts; Theory of a Traveling Wave Feed for a Planar Slot Array Antenna; Time Manager Software for a Flight Processor; Simulation of Oxygen Disintegration and Mixing With Hydrogen or Helium at Supercritical Pressure; A Superfluid Pulse Tube Refrigerator Without Moving Parts for Sub-Kelvin Cooling; Sapphire Viewports for a Venus Probe; The Mobile Chamber; Electric Propulsion Induced Secondary Mass Spectroscopy; and Radiation-Tolerant DC-DC Converters.

Source record↗

NASA NTRS1958

Tabulated Data From a Pressure-Distribution Investigation at Mach Number 2.01 of a 45 Deg Sweptback-Wing Airplane Model at Combined Angles of Attack and Sideslip

A pressure-distribution investigation of a wing-body combination has been conducted in the Langley 4- by 4-foot supersonic pressure tunnel at a Mach number of 2.01. The model configuration consisted of an ogive-circular-cylinder body (fineness ratio of approximately ii) and a wing with 45 deg of sweepback at the quarter-chord line, an aspect ratio of 4, and a taper ratio of 0.2. Data were obtained on high-, mid-, and low-wing configurations and for the body and wing alone for a range of angles of attack and yaw from 0 deg to 15 deg. The tabulated pressure coefficients are presented in this report.

PRESSURE DISTRIBUTION↗

NASA NTRS1952

An Experimental Investigation of Transonic Flow Past Two-Dimensional Wedge and Circular-Arc Sections Using A Mach-Zehnder Interferometer

Report presents the results of interferometer measurements of the flow field near two-dimensional wedge and circular-arc sections of zero angle of attack at high-subsonic and low-supersonic velocities. Both subsonic flow with local supersonic zone and supersonic flow with detached shock wave have been investigated. Pressure distributions and drag coefficients as a function of Mach number have been obtained. The wedge data are compared with the theoretical work on flow past wedge sections of Guderley and Yoshihara, Vincenti and Wagner, and Cole. Pressure distributions and drag coefficients for the wedge and circular-arc sections are presented throughout the entire transonic range of velocities.

Bryson, Arthur Earl, Jr↗

NASA NTRS2014

Structure and Evolution of the Lunar Procellarum Region as Revealed by GRAIL Gravity Data

The Procellarum region is a broad area on the nearside of the Moon that is characterized by low elevations, thin crust, and high surface concentrations of the heat-producing elements uranium, thorium, and potassium. The Procellarum region has been interpreted as an ancient impact basin approximately 3200 km in diameter, though supporting evidence at the surface would have been largely obscured as a result of the great antiquity and poor preservation of any diagnostic features. Here we use data from the Gravity Recovery and Interior Laboratory (GRAIL) mission to examine the subsurface structure of Procellarum. The Bouguer gravity anomalies and gravity gradients reveal a pattern of narrow linear anomalies that border the Procellarum region and are interpreted to be the frozen remnants of lava-filled rifts and the underlying feeder dikes that served as the magma plumbing system for much of the nearside mare volcanism. The discontinuous surface structures that were earlier interpreted as remnants of an impact basin rim are shown in GRAIL data to be a part of this continuous set of quasi-rectangular border structures with angular intersections, contrary to the expected circular or elliptical shape of an impact basin. The spatial pattern of magmatic-tectonic structures bounding Procellarum is consistent with their formation in response to thermal stresses produced by the differential cooling of the province relative to its surroundings, coupled with magmatic activity driven by the elevated heat flux in the region.

Procellarum↗

NASA NTRS1992

Origin of orbital debris impacts on Long Duration Exposure Facility's (LDEF) trailing surfaces

Orbital debris tracked by the US Space Command is mostly in near circular orbit around the Earth. If small debris were in the same types of orbits, there would be very few orbital debris impacts on the Long Duration Exposure Facility's (LDEF's) trailing surfaces. However, at least 15 percent of the impacts found on the trailing A03 gold surface was found to be orbital debris impacts. This measurement suggests that the orbital distribution of small debris is not the same as that of larger debris. Although this is not a total surprise, since modelling of satellite breakups has predicted different distributions, it does raise questions as to what types of orbits could be responsible for these impacts. A model was developed to explain these LDEF results. The model calculates the expected debris impact crater distribution around LDEF, as a function of debris orbital parameters. The results show that only low inclination and highly elliptical orbits could be responsible for these impacts. The most common object left in this type of orbit is an orbital transfer stage, used by the US and ESA to place objects into geosynchronous orbit, and inclinations near 28 and 7 degrees for the US and ESA, respectively. Even large fragments from satellites, which break up in these types of orbits, are difficult to observe from the ground; consequently, little is known about the number and characteristics of breakups in these orbits. The LDEF data suggest that these objects are breaking up. The LDEF data also suggest that the ratio of the contribution of small debris from this type of orbit to the contribution from circular orbits is about an order of magnitude larger than the same ratio for debris tracked by the US Space Command.

Kessler, Donald J.↗

DOE OSTI2025

Environmental and socio-economic Pareto-front trade-off analysis of U.S. PET packaging material in a circular economy

Various recycling technologies are emerging to implement circular economy in plasticssupply chain systems. However, the environmental and socio-economic trade-offs of in circular economy are not well understood at a systems level. Particularly, quantifying these trade-offs as a function of end-of-life (EOL) management decisions, including transition of recycling technologies, systems level metrics such as circularity, recycled content, and the need for fossil-derived plastics are not well understood. Here, the present study addressed these research gaps by applying a systems analysis modeling approach that utilizes material flow analysis, life cycle assessment, socioeconomic data, and system optimization techniques for polyethylene terephthalate (PET) packaging supply chains in the United States. Pareto-front trade-offs between conflicting environmental and socio-economic impacts as well as those between socioeconomic impacts and circularity were explored using the epsilon constraint method. The Pareto-front trade-off analysis revealed the transition of EOL management strategies for PET packaging systems, including changes in selection of recycling technologies, to aid decision making process by quantifying studied system metrics. Transitioning from environmentally optimal to socio-economically optimal systems led to increased employment (by 17%), wages (by 26%), and revenues (by 6%) but also led to increased global warming potential (GWP; by 65%), energy consumption (by 59%), and reliance on fossil PET in the system (by 78%). Finally, the results show that there is not a unique set of recycling technologies to achieve a sustainable circular economy of PET packaging system, instead it depends on the decision maker’s objectives and targeted metrics of the system.

54 - ENVIRONMENTAL SCIENCES/GLOBAL CLIMATE CHANGE ↗

NASA NTRS2018

NICER Discovers the Ultracompact Orbit of the Accreting Millisecond Pulsar IGR J17062-6143

We present results of recent Neutron Star Interior Composition Explorer (NICER) observations of the accreting millisecond X-ray pulsar (AMXP) IGR J17062-6143 that show that it resides in a circular, ultracompact binary with a 38-minute orbital period. NICER observed the source for 26 kiloseconds over a 5.3-day span in 2017 August, and again for 14 and 11 kiloseconds in 2017 October and November, respectively. A power spectral analysis of the August exposure confirms the previous detection of pulsations at 163.656 Hertz in Rossi X-ray Timing Explorer (RXTE) data, and reveals phase modulation due to orbital motion of the neutron star. A coherent search for the orbital solution using the Z squared method finds a best-fitting circular orbit with a period of 2278.21 seconds (37.97 minutes), a projected semimajor axis of 0.00390 lt-s (Localization Test Statistic), and a barycentric pulsar frequency of 163.6561105 Hertz. This is currently the shortest known orbital period for an AMXP. The mass function is 9.12 times 10 (sup minus 8) solar mass, presently the smallest known for a stellar binary. The minimum donor mass ranges from approximately 0.005 to 0.007 times the solar mass for a neutron star mass from 1.2 to 2 times the solar mass. Assuming mass transfer is driven by gravitational radiation, we find donor mass and binary inclination bounds of 0.0175-0.0155 times the solar mass and 19 degrees less than i less than 27.5 degrees, where the lower and upper bounds correspond to 1.4 and 2 times the solar mass neutron stars, respectively. Folding the data accounting for the orbital modulation reveals a sinusoidal profile with fractional amplitude 2.04 plus or minus 0.11 percent (0.3-3.2 kiloelectronvolts).

Strohmayer, T. E.↗

NASA NTRS1980

Effect of wing location and strakes on stability and control characteristics of a monoplanar circular missile with low-profile tail fins at supersonic speeds

A wind tunnel test was conducted at Mach numbers from 1.70 to 2.86 to extend the aerodynamic data base for wing tail effect on stability and control characteristics of monoplanar missiles. The results are summarized to show the effects of tail fin dihedral angle, wing location, and nose body strakes. The results indicate that an increase in tail fin dihedral angle produces positive increments in directional stability that allow greater trimmed lift coefficient values (maneuver potential) to be obtained. An increase in wing tail gap for the Mach number range reduces the aerodynamic center travel and produces reductions in directional stability at the lower angles of attack. A change in wing height (vertical location) strongly influences the angle of attack at which pitch up and the most directional stability occur. The addition of strakes to the baseline configuration increases directional stability, which allows a significant increase in stable trimmed maneuver capability. The tail fins of the baseline configuration are effective in producing roll and yaw control that are accompanied by favorable yaw and roll, respectively.

Blair, A. B., Jr.↗

DOE OSTI2021

CELAVI (Circular Economy Lifecycle Assessment and VIsualization) [SWR-20-87]

A circular economy emphasizes the efficient use of all resources (e.g., materials, land, water). Despite anticipated overall benefits to society, the transition to a circular economy is likely to create regional differences in impacts. Current tools are unable to fully evaluate these potential externalities, which will be important for informing research prioritization and regional decision making. The Circular Economy Lifecycle Assessment and VIsualization (CELAVI) framework allows stakeholders to quantify and visualize potential regional and sectoral transfers of impacts that could result from transitioning to a circular economy, with particular focus on energy materials. The framework uses system dynamics to model material flows for multiple circular economy pathways and decisions are based on learning-by-doing and are implemented via cost and strategic value of different circular economy pathways. It uses network theory to track the spatial and sectoral flow of functional units across a graph and discrete event simulation to to step through time and evaluate lifecycle assessment data at each time step. The framework is designed to be flexible and scalable to accommodate multiple energy materials and multiple energy technologies. The primary goal of CELAVI is to help answer questions about how material flows and environmental and economic impacts of energy systems might change if the circularity of energy systems increases.

Eberle, Annika↗

DOE OSTI2022

CELAVI (Circular Economy Lifecycle Assessment and VIsualization) v.1.3.1 9/30/2022 [SWR-20-87]

Eberle, Annika↗

NASA NTRS1986

Upwind Navier-Stokes solutions for separated periodic flows

The application of an upwind implicit approximate factorization Navier-Stokes algorithm to highly separated flow is described. Using both the thin-layer and complete forms of the Navier-Stokes equations, the low Reynolds number laminar flow around a circular cylinder with periodic shedding is solved. The effect of grid density, grid extent, and time step on the Strouhal number is shown. Results from both sets of equations agree within the experimental data band. Unsteady, laminar flow computations around inclined plates and separated airfoils are also described. Strouhal numbers agree to within 5 percent of experiments for inclined plates. Differences between the complete equations and the thin-layer approximation for separated periodic flows are discussed. Computations of an impulsively started circular cylinder and airfoil yield time-accurate flowfield shapes in good agreement with experimental flow visualizations. The turbulent computation of an airfoil at a high angle-of-attack is massively separated, but shows no evidence of periodicity.

Rumsey, C. L.↗