Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “carbon analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Electric Vehicle Lithium-Ion Battery Life Cycle Management

There is no question that electric vehicles (EVs), which are key for addressing climate change impacts from the transportation sector, are quickly gaining popularity and availability. With limits and other challenges related to the supply of critical battery minerals, maximizing the use of EV batteries and ensuring recovery of battery minerals is imperative. Therefore, proper end-of-life-cycle management (reuse and recycling) of these batteries must be part of the EV ecosystem from the perspective of both the supply chain and environmental footprint. Second use of batteries for energy storage systems extends the initial life of these resources and provides a buffer until economical material recovery facilities are in place. Although there are multiple pathways to recycling and recovery of materials, new recovery technologies are moving toward commercially available hydrometallurgy and promising direct recycling, which analysis has shown has the lowest overall carbon footprint. Strategically locating these plants close to battery collection further reduces transportation and thus recycling and recovering costs. Proper life cycle management could alleviate future lithium-ion battery materials supply chains for EVs. Governments and other stakeholders around the world have started initiatives and proposed regulations to address the challenges associated with life cycle management of EV lithium batteries. Finally, as manufacturers are increasingly faced with the likelihood of such extensive regulatory requirements, attention should be given to new designs, sales, and service models that can reduce life cycle management costs.

25 ENERGY STORAGE↗
DOE OSTI2024

Direct Air Capture Recovery of Energy for CCUS Partnership (DAC RECO 2 UP) Final Technical Report

The “Direct Air Capture Recovery of Energy for CCUS Partnership (DAC RECO 2 UP)” project employs a team approach and supports the U.S. Department of Energy Office of Fossil Energy and Carbon Management’s (DOE-FECM) goal to decrease the cost of capture through the testing of existing direct air capture (DAC) materials in integrated field units that produce a concentrated carbon dioxide (CO 2 ) stream of at least 95% purity. Solid-amine CO 2 adsorption-desorption contactor technology, proven in the laboratory, is undergoing high-fidelity design/validation. Recoverable energy is readily available from a large number of commercial locations where DAC can be deployed; therefore, advancing the fidelity of energy recovery to directly reduce the cost of DAC is a key project objective. In addition, many commercial facilities have low-concentration CO 2 vents that are uneconomical to treat alone but could provide more efficient mass and thermal transport to DAC systems with integrated energy recovery and flexible CO 2 treatment capabilities. Technology scale-up leverages past research and occurs in a commercially relevant environment at the National Carbon Capture Center. Prescreening techno-economic analysis, risk assessments, and life cycle analysis are being performed by experienced team members. Results of the project will address critical technical barriers that, when solved, will improve the capital and operating costs of DAC while validating commercial relevance of cost and product quality/need.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Whole Algae Hydrothermal Liquefaction and Upgrading: A review of progress and challenges and insight into the future

This report summarizes the research at Pacific Northwest National Laboratory (PNNL) to evaluate the economic viability and environmental impact of using microalgae to produce fuels and other products via hydrothermal liquefaction (HTL). Over the past several years, PNNL has examined key aspects of feedstock cost and availability, formatting and conversion techniques, and the utilization of all HTL products. Investigations of feedstock cost led to opportunities to work with cost-advantaged algal feedstocks that can be provided at minimal cost for HTL processing. Cost-advantaged algae include wastewater-grown algae and harvested algal blooms. Although farm-cultivated algae offer the best possible biomass composition and scalability for HTL processing, the cost of the feedstock is too high to yield an economically competitive biofuel. Processing cost-advantaged feedstocks creates other unique challenges in adapting HTL to upgrade biomass with higher than typical ash content and less preferred composition (low lipid). Despite the challenges, HTL of cost-advantaged algae results in economically competitive pricing scenarios and significant advantages in reducing net emissions below 70% of the petroleum baseline. The utilization of a variety of potential non-fuel products from algal HTL, such as the use of HTL solids as a cement additive, provides a significant reduction in net emissions by offsetting emissions from other carbon-intense products. This report presents an analysis of the research conducted at PNNL to develop an economically and environmentally beneficial process for algae HTL.

09 BIOMASS FUELS↗
DOE OSTI2022

Light-Duty Vehicle Choice Modeling and Transportation Decarbonization Analysis

Light-duty vehicles are the biggest contributor of carbon emissions in the transportation sector. This project uses the Automotive Deployment Options Projection Tool (ADOPT) to explore pathways to light-duty decarbonization through technology improvements being researched by the Department of Energies Vehicle Technology Office. It includes sensitivities to market conditions, such as proposed vehicle purchase incentives, and changes to the Corporate Average Fuel Economy and Greenhouse Gas regulations. The results suggest that achieving the Vehicle Technology Office's research goals will lead to one third of the annual carbon emissions by 2050, primarily through vehicle electrification.

ADVANCED PROPULSION SYSTEMS,ENERGY PLANNING, POLIC↗
DOE OSTI2024

Carbon neutrality in Malaysia and Kuala Lumpur: Insights from stakeholder-driven integrated assessment modeling

Several cities in Malaysia have established plans to reduce their CO2 emissions, in addition to Malaysia submitting a Nationally Determined Contribution to reduce its carbon intensity (against GDP) by 45% in 2030 compared to 2005. Meeting these emissions reduction goals will require a joint effort between governments, industries, and corporations at different scales and across sectors. In collaboration with national and sub-national stakeholders, we developed and used a global integrated assessment model to explore emissions mitigation pathways in Malaysia and Kuala Lumpur. Guided by current climate action plans, we created a suite of scenarios to reflect uncertainties in policy ambition, level of adoption, and implementation for reaching carbon neutrality. Through iterative engagement with all parties, we refined the scenarios and focus of the analysis to best meet the stakeholders’ needs. We found that Malaysia can reduce its carbon intensity and reach carbon neutrality by 2050, and that action in Kuala Lumpur can play a significant role. Decarbonization of the power sector paired with extensive electrification, energy efficiency improvements in buildings, transportation, and industry, and the use of advanced technologies such as hydrogen and carbon capture and storage will be major drivers to mitigate emissions, with carbon dioxide removal strategies being key to eliminate residual emissions. This study highlights the participatory process in which stakeholders contributed to the development of the model and guided the analysis, as well as insights into Malaysia’s decarbonization potential and the role of multilevel governance.

cities↗
DOE OSTI2026

Design and Analysis of a 25 MWe Supercritical CO2 Turbo Machine

This paper presents the design and analysis of a turbo machine operating with supercritical carbon dioxide (sCO2) in a 25 MWe Recompression Brayton Cycle (RCBC). The work was performed under US Department of Energy (DoE) program DE-EE-0010318. The design process involves the aerodynamic design of the compressor and turbine, including the initial layout of flowpaths and stage configurations to achieve high efficiency and performance. Additionally, a comprehensive rotodynamic analysis is performed to ensure the stability and reliability of the system. Conceptual designs for a high-speed motor and synchronous generator that match turbomachinery requirements are also developed from first principles.

42 ENGINEERING↗
DOE OSTI2024

Estimating the carbon footprint of computational fluid dynamics

In this study, computational resources have grown exponentially in the past few decades. These machines make possible research and design in fields as diverse as medicine, astronomy, and engineering. Despite ever-increasing computational capabilities, direct simulation of complex systems has remained challenging owing to the degrees of freedom involved. At the cusp of exascale computing, high-resolution simulation of practical problems with minimal model assumptions may soon experience a renaissance. However, growing reliance on modern computers comes at the cost of a growing carbon footprint. To illustrate this, we examine historic computations in fluid dynamics where larger computers have afforded the opportunity to simulate flows at increasingly relevant Reynolds numbers. Under a variety of flow configurations, the carbon footprint of such simulations is found to scale roughly with the fourth power of Reynolds number. This is primarily explained by the computation cost in core-hours, which is also described by similar scaling, though regional differences in renewable energy use also play a role. Using the established correlation, we examine a large database of simulations to develop estimates for the carbon footprint of computational fluid dynamics in a given year. Collectively, the analysis provides an additional benchmark for new computations where, in addition to balancing considerations of model fidelity, carbon footprint should also be considered.

42 ENGINEERING↗
DOE OSTI2024

Toward Rational Design of Nickel Catalysts for Thermocatalytic Decomposition of Methane for Carbon Dioxide-Free Hydrogen and Value-Added Carbon Co-Product: A Review

Thermocatalytic decomposition of methane provides opportunities for hydrogen (H2) production with no emission of carbon dioxide. However, high-value carbon products need to be produced for economic deployment of thermocatalytic decomposition and to achieve a minimum H 2 selling price below the U.S, Department of Energy target of $ 1/kg H 2 . In this review, we re-evaluate data on catalyst development reported in the literature and propose correlations between catalyst characteristics, catalytic stability, and properties of carbon co-products. In the first part of the review, growth mechanisms for carbon nanotubes using state-of-the-art chemical vapor deposition are reviewed to catalog the effects of catalyst characteristics, the influence of carbon sources, interactions between metal particles and supports, and metal particle sizes on carbon growth. In the second part, representative developments in mono-, bi-, and tri-metallic nickel catalysts are highlighted. We present kinetic analysis of reactions catalyzed by mono-metallic nickel catalysts, which generates a correlation between metal particle size and catalyst stability. Rational design of Ni-based catalysts for TCD of methane requires attention to the size of the metal particle and effective normalization of the reaction rates. Further attention to the distribution of the metal particle sizes may help identify catalyst properties that contribute longevity and selectivity to processes that use them. While it is tempting to focus on the highest valued carbon products (e.g., CNTs and CFs), analysis of the markets for other carbon products suggests that a more flexible approach may generate comparable returns without the risk associated with specialization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Willow Biomass Crops Are a Carbon Negative or Low-Carbon Feedstock Depending on Prior Land Use and Transportation Distances to End Users

Few life cycle assessments (LCAs) on willow biomass production have investigated the effects of key geographically specific parameters. This study uses a spatial LCA model for willow biomass production to determine spatially explicit greenhouse gas (GHG) emissions and energy return on investment (EROI), including land use conversion from pasture and cropland or grassland. There were negative GHG emissions on 92% of the land identified as suitable for willow biomass production, indicating this system’s potential for climate change mitigation. For willow planted on cropland or pasture, life cycle GHG emissions ranged from −53.2 to −176.9 kg CO2eq Mg-1. When willow was grown on grassland the projected decrease in soil organic carbon resulted in a slightly positive GHG balance. Changes in soil organic carbon (SOC) associated with land use change, transportation distance, and willow yield had the greatest impacts on GHG emissions. Results from the uncertainty analysis exhibited large variations in GHG emissions between counties arising from differences in these parameters. The average EROI across the entire region was 19.2. Willow biomass can be a carbon negative or low-carbon energy source with a high EROI in regions with similar infrastructure, transportation distances, and growing conditions such as soil characteristics, land cover types, and climate.

09 BIOMASS FUELS↗
DOE OSTI2025

Environmentally Friendly Use of Carbon Ore for Advanced Building Materials for Homes and Commercial Buildings

Through this effort, X-MAT CCC sought to confirm the utility and commercialization potential of carbon-derived building materials (CDBM) technology licensed from our partner, Semplastics. These CDBM products contain at least 52% coal-derived carbon by mass. Including the binders within the resin, the products contain at least 71% carbon by mass overall, meeting a key criterion for DE-FOA-0002185 – Area of Interest (AOI) 5 – Design Research and Development, Validation, and Fabrication of a Prototype Carbon-Based Building. The Phase II project has resulted in a technology demonstrator prototype structure, a detailed design for a carbon-based building, and updated techno-economic analysis (TEA) including detailed market surveys to show the commercial viability of CDBM products. We pursued the following objectives in Phase II: (1) construction of a partial building shell as a technology demonstrator, (2) testing of CDBM products, individually and in assemblies, (3) demonstration of bonding of CDBM and traditional building materials (TBM) in structural applications, (4) production of a detailed design for a carbon-based building, and (5) an update of the TEA that was performed in Phase I. In Phase II, X-MAT CCC and our industry team performed the development and testing needed to improve the maturity of the technology from a Technology Readiness Level (TRL) of 5 to TRL 6. CDBM have been shown by our partner Semplastics to exhibit a number of high-performance characteristics, including high strength (five times the flexure strength of the best commercial brick, and more than twice the compressive strength of construction-grade concrete block), lower density, improved mechanical durability and abrasion resistance, very high temperature stability, and resistance to chemicals, acids, salts, and water. These properties offer significant improvements over conventional building materials. Phase II built upon the work accomplished in Phase I by performing technical and economic research and development to confirm the viability of CDBM as commercial products in various markets. Acknowledgment: This material is based upon work supported by the Department of Energy under Award Number DE-FE0031985.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2020

Life Cycle Analysis of Greenhouse Gas Emissions for the Niagaran Reef Complex CO 2 -EOR Operations

A greenhouse gas emissions life cycle analysis (LCA) was completed for 22 years of carbon dioxide-enhanced oil recovery (CO 2 -EOR) operations at the Niagaran reef complex in the northern Michigan Basin based on research by the Midwest Regional Carbon Sequestration Partnership (MRCSP). The objective of the greenhouse gas LCA was to account for the total greenhouse gas emissions generated through the CO 2 -EOR process..

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Techno-Economic Analysis

This National Energy Technology Laboratory presentation was given at the Carbon Conversion Procurement Grant Program Regional Workshops. The workshops are organized collaboratively by the DOE Office of Fossil Energy and Carbon Management and the United States Energy Association. There are a series of four workshops scheduled: 1) August 30, 2022 in Knoxville, TN (University of Tennessee) 2) September 13, 2022 in Emeryville, CA (Lawrence Berkeley National Laboratory 3) September 27, 2022 in New York, NY (Orrick, Herrington, & Sutcliffe LLP) 4) October 18, 2022 in Minneapolis, MN (TBD) The intent of the workshop is to provide potential applicants with background on the Procurement Grants program and the types of information requested. The specific purpose of this presentation is to give a high-level overview of techno-economic analysis to an audience that has little to no experience conducting them. The intent is to help the audience understand why techno-economic analysis is requested in the application process and to educate on its utility.

Hackett, Gregory↗
DOE OSTI2023

BOTTLE 1 - Introduction and BOTTLE Overview

The Bio-Optimized Technologies to keep Thermoplastics out of Landfills and the Environment (BOTTLE) Consortium aims to develop robust processes to upcycle existing waste plastics and to develop new plastics that are recyclable-by-design, both in direct alignment with DOE's Strategy for Plastics Innovation. We accomplish our work in the BOTTLE Consortium through an organizational framework that includes three primary research tasks, Deconstruction, Upcycling, and Redesign, which are supported by three cross-cutting tasks, Analysis, Characterization, and Modeling, BOTTLE also has tasks focused on Industry Engagement and Diversity, Equity, and Inclusion (DEI). This presentation will review the approach and management structure of BOTTLE, the importance of analysis-guided research, and the key metrics for carbon, economic, energy, and greenhouse gas emissions. In the FY21-FY23 period, BOTTLE has drafted and enacted a comprehensive DEI plan, assembled a world-class Technical Advisory Board (TAB) to provide constructive feedback on our performance, had our first in-person all-hands meeting in summer 2022, and on-boarded and off-boarded research activities based on active project management and analysis. From an impact perspective, BOTTLE researchers have published over 40 peer-reviewed manuscripts (many in leading journals), submitted >30 patent applications, and initiated 6 funds-in industry partnerships.

BIOMASS FUELS↗
DOE OSTI2025

Upconversion of non-recycled MSW paper fractions into biochar via slow pyrolysis and life cycle analysis: Pathways to net negative GHG emission

This study presents an integrated and sustainable approach to valorizing non-recycled municipal solid waste (MSW), a heterogeneous and underutilized waste stream destined for landfilling, by converting it into valuable biochar resources. Specifically, we investigated the upcycling of nonrecycled paper waste based on compositional analysis into four major fractions: high cellulose, high lignin, high contamination, and high ash content papers. These fractions were then homogenized and subjected to slow pyrolysis. The high cellulose fraction (36.1 %) was the most abundant, and contained 66.7 % cellulose, while the high lignin fraction showed the highest lignin (12.1 %) and carbon content (44 %), resulting in highest energy value of 17.4 MJ kg −1 . Biochar yields ranged from 25.6 % to 35.6 %, with the high ash fraction producing the highest yield and alkalinity (pH ≈ 11.2) due to its higher mineral content. Elemental analysis revealed enhanced carbon content up to 76.9 % and reduced oxygen and hydrogen, confirming effective carbonization. The high lignin-derived biochar showed the highest aromatic carbon content (82.8 %) and greater structural stability, while contaminated and ash-rich fractions exhibited dense, low-porosity surfaces due to the presence of contaminants and minerals. Spectroscopic analysis revealed degradation of carbohydrates, disappearance of cellulose peaks and formation of aromatic and mineral derived phases. The scaled life cycle process yielded a global warming potential (GWP) of 119.3 kg CO 2 -eq per ton of dry paper waste, offset by soil carbon sequestration of − 556.41 kg CO 2 -eq, resulting in a net impact of − 427.36 kg CO 2 -eq. This represents a net carbon removal exceeding by ~186 % the emissions associated with landfilling paper waste with electricity generation.

09 BIOMASS FUELS↗
DOE OSTI2024

Life-cycle analysis of hydrogen production from water electrolyzers

The United States' focus on decarbonization has spawned interest among policymakers in deploying water electrolysis technology for clean hydrogen production. However, water electrolyzers also raise concerns regarding their substantial use of carbon-intensive materials. Here, we conduct a comprehensive life-cycle analysis (LCA) of three prominent water electrolyzer technologies to investigate the environmental implications of their manufacturing and life cycles under different energy sources. All electrolyzer technologies employing low-carbon energy (nuclear, solar, or wind) exhibit life-cycle greenhouse gas (GHG) emissions of 0.3-2.4 kg-CO 2-eq /kg-H 2 . This is significantly lower than the corresponding GHG emissions for hydrogen production via both conventional steam methane reforming and alternative autothermal reforming with carbon capture and storage (by > 50%). The well-to-gate GHG emissions of low-carbon electrolyzers (0-0.36 kg-CO 2-eq / kg-H 2 ) qualify for Tier I of the production tax credit in the U.S.' Inflation Reduction Act of 2022, indicating their suitability for producing decarbonized hydrogen under this program.

08 HYDROGEN↗
DOE OSTI2021

Portable quantitative confocal Raman spectroscopy: Non-destructive approach of the carbonation chemistry and kinetics

Highlights: • Raman spectroscopy was used to monitor carbonation of portlandite • The approach was non-destructive, continuous, and performed within the material • Carbonation was identified coupling Raman spectroscopy and chemometrics • Kinetics was calculated for one portlandite thickness at different CO{sub 2}-percentages Carbonation is one major alteration process of cementitious materials. It can be monitored through several methods, all destructive. In this study, some preliminary investigations were conducted to monitor the carbonation process of pure portlandite with an in situ and non-destructive spectroscopic method. This complementary approach was motivated by a literature review indicating the benefits of Raman spectroscopy, but requiring innovative approaches for data acquisition and analysis. The material was selected to validate this spectroscopic monitoring, coupled with chemometrics tools to allowing an early detection of the carbonation reaction through a structure identified in the spectra data population. The carbonation occurred abruptly, and spectra analysis indicated the occurrence of phases synonymous of microstructural evolutions. Varying the atmospheric percentage of CO{sub 2} (0.04% - 4%) conducted to an appreciation of the kinetics of the carbonation front through the same thickness of portlandite.

36 MATERIALS SCIENCE↗