Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “boundary element method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Probing phase stability in CrMoNbV using cluster expansion method, CALPHAD calculations and experiments

High entropy alloys (HEA), a novel class of materials with multiple principal elements, allow us to tune the properties within a wide composition range where the solid-solution phase is stable. However, it is difficult to experimentally determine the boundaries of the single-phase region. In this paper, we calculate the phase diagram of the CrMoNbV quaternary system, as well as its constituent binary and ternary subsystems, using a combination of the cluster expansion method and CALPHAD calculations. We further verify these results by carrying out experiments at two different compositions of the full quaternary system. Furthermore, our work shows how these computational tools can enable efficient discovery and development of new HEAs.

36 MATERIALS SCIENCE↗
NASA NTRS1976

Some recent progress in transonic flow computation

Although the development of a finite difference relaxation procedure to solve the steady form of equations of motion gave birth to the study of computational transonic aerodynamics and considerable progress has been made using the small disturbance theory, no general analytical solution method yet exists for transonic flows that include three dimensional unsteady, and viscous effects. Two techniques are described which are useful in computational transonic aerodynamics applications. The finite volume method simplifies the application of boundary conditions without introducing the constriction associated with small disturbance theory. Governing equations are solved in a Cartesian coordinate system using a body-oriented and shock-oriented mesh network. Only the volume and surface normal directions of the volume elements must be known. The other method, configuration design by numerical optimization, can be used by aircraft designers to develop configurations that satisfy specific geometric performance constraints. Two examples of airfoil design by numerical optimization are presented.

Ballhaus, W. F.↗
DOE OSTI2022

CAMERA: A method for cost-aware, adaptive, multifidelity, efficient reliability analysis

Estimating probability of failure in aerospace systems is a critical requirement for flight certification and qualification. Failure probability estimation involves resolving tails of probability distributions, and Monte Carlo sampling methods are intractable when expensive high-fidelity simulations have to be queried. Here, we propose a method to use models of multiple fidelities that trade accuracy for computational efficiency. Specifically, we propose the use of multifidelity Gaussian process models to efficiently fuse models at multiple fidelity, thereby offering a cheap surrogate model that emulates the original model at all fidelities. Furthermore, we propose a novel sequential acquisition function based experiment design framework that can automatically select samples from appropriate fidelity models to make predictions about quantities of interest at the highest fidelity. We use our proposed approach in an importance sampling setting and demonstrate our method on the failure level set and probability estimation on synthetic test functions and two real-world applications, namely, the reliability analysis of a gas turbine engine blade using a finite element method and a transonic aerodynamic wing test case using Reynolds-averaged Navier-Stokes equations. We show that our method predicts the failure boundary and probability more accurately and at a fraction of the computational cost compared with using just a single expensive high-fidelity model. Finally, we show that our sequential approach is guaranteed to asymptotically converge to the true failure boundary with high probability.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Stress Analysis and Failure Behavior of SiC/SiC Textile Composite Tubes

A novel method for analyzing tubular textile composites was developed by obtaining a curved representative volume element (RVE) from the transformation of a flat RVE. Periodic boundary conditions were imposed on the curved RVE. The stresses in a transeversely isotropic yarn were compared between the two RVEs. It was found that there was a discrepancy between the two models.

Thandaga Nagaraju, Hemanth↗
NASA NTRS1982

Implementation of a C-1 triangular element based on the P-version of the finite element method

The implementation of a computer code CONE (for C(1) continuity) based on the p-version of the finite element method is described. A hierarchic family of triangular finite elements of degree p 5 is used. This family enforces C(1)-continuity across interelement boundaries, and the code is applicable to fourth order partial differential equations in two independent variables, in particular to the biharmonic equation. Applications to several benchmark problems in plate bending are presented. Sample results are examined and compared with theoretical predictions. In particular the analysis of the bending of a rhombic plate shows a significant improvement over othr published results.

Wang, D. W.↗
NASA NTRS1984

Calculated effects of varying Reynolds Number and dynamic pressure on flexible wings at transonic speeds

A computational method is described that includes the effects of static aeroelastic wing deflections in steady transonic aerodynamic calculations. This method, known as the Transonic Aero-elastic Program System (TAPS), interacts a 3D transonic computer code with boundary layer and a linear finite element structural analysis codes to calculate wing pressures and deflections. The nonlinear nature of the transonic flow makes it necessary to couple the aerodynamic and structures codes in an iterative manner. TAPS has been arranged in a modular fashion so that different aerodynamic or structures programs may be used with a minimum of coding changes required. Results obtained using two different aerodynamic codes in TAPS are given, and those results are correlated with experimental data.

Campbell, R. L.↗
NASA NTRS1988

Mixing control in a plane shear layer

An investigation of mixing processes in a plane shear layer by a direct numerical simulation with a high-order numerical technique, the isoparametric spectral element method, is presented. The computational domain includes a region with the splitter plate that allows to start the flow as a laminar (Blasius) boundary layers with different velocities and concentrations, merging in the shear layer and undergoing transition to highly-unsteady structures with intensive mixing. The augmentation of mixing as a function of a downstream location, the intensity and type of vortical structures in the layer is investigated by an introduction of disturbance at the high-velocity inflow. The character of the dynamic mixing is displayed along with time averaged profiles and statistical characteristics.

Korczak, K. Z.↗
NASA NTRS1993

Transition elements based on transfinite interpolation

In this study the transfinite interpolation methodology, a 'blending-function' method in particular, is utilized for the formulation of transition elements. The method offers a formal way of meeting continuity requirements in a transition element. Element shape functions are derived by blending the continuity requirements of individual boundary segments. The blending directions are naturally orthogonal in rectangular domains therefore interpolation of the boundaries over rectangular 2D and 3D elements can be performed with minimal effort. In triangular domains, however, the choice of blending directions and interpolants is not straightforward. For that reason, two interpolation techniques are proposed for blending of the boundaries of triangular domains. A series of transition elements of various classes compatible with elements of different orders and dimensions is developed and the full potential of the transfinite interpolation, as it applies to element formulation, is explored.

Odabas, Onur R.↗
NASA NTRS1989

Probalistic structural analysis methods for select space propulsion system structural components

A summary of the status of this five-year project which is now in its third year of research and development is presented. The goal of the project is the development of several methodologies for probabilistic structural modeling. Probabilistic structural modeling consists of stochastic models of material properties, part geometries, boundary conditions, as well as loading conditions. The current presentation focuses on one methodology - coupling of an advanced finite element structural analysis code with probabilistic modeling strategies. The essential algorithm developments for combining the finite element and probabilistic analysis methods are reported. The validity of the resulting probabilistic structural analysis method is confirmed through a series of test problems with exact results based on Monte Carlo simulations. Additionally, the applicability of the method to a Space Propulsion System (a turbine blade) is demonstrated for static stresses.

Cruse, T. A.↗
NASA NTRS1993

Mechanically fastened composite laminates subjected to combined bearing-bypass and shear loading

Bolts and rivets provide a means of load transfer in the construction of aircraft. However, they give rise to stress concentrations and are often the source and location of static and fatigue failures. Furthermore, fastener holes are prone to cracks during take-off and landing. These cracks present the most common origin of structural failures in aircraft. Therefore, accurate determination of the contact stresses associated with such loaded holes in mechanically fastened joints is essential to reliable strength evaluation and failure prediction. As the laminate is subjected to loading, the contact region, whose extent is not known, develops between the fastener and the hole boundary through this contact region, which consists of slip and no-slip zones due to friction. The presence of the unknown contact stress distribution over the contact region between the pin and the composite laminate, material anisotropy, friction between the pin and the laminate, pin-hole clearance, combined bearing-bypass and shear loading, and finite geometry of the laminate result in a complex non-linear problem. In the case of bearing-bypass loading in compression, this non-linear problem is further complicated by the presence of dual contact regions. Previous research concerning the analysis of mechanical joints subjected to combined bearing-bypass and shear loading is non-existent. In the case of bearing-bypass loading only, except for the study conducted by Naik and Crews (1991), others employed the concept of superposition which is not valid for this non-linear problem. Naik and Crews applied a linear finite element analysis with conditions along the pin-hole contact region specified as displacement constraint equations. The major shortcoming of this method is that the variation of the contract region as a function of the applied load should be known a priori. Also, their analysis is limited to symmetric geometry and material systems, and frictionless boundary conditions. Since the contact stress distribution and the contact region are not known a priori, they did not directly impose the boundary conditions appropriate for modelling the contact and on-contact regions between the fastener and the hole. Furthermore, finite element analysis is not suitable for iterative design calculations for optimizing laminate construction in the presence of fasteners under complex loading conditions. In this study, the solution method developed by Madenci and Ileri (1992a,b) has been extended to determine the contact stresses in mechanical joints under combined bearing-bypass and shear loading, and bearing-bypass loading in compression resulting in dual contact regions.

Madenci, Erdogan↗
NASA NTRS1985

Hybrid solid element with a traction-free cylindrical surface

An eight node solid element with two parallel faces and one traction-free cylindrical surface is derived using the assumed stress hybrid method. Cylindrical coordinates are used so that the assumed stresses satisfy the equilibrium equations as well as the traction-free condition over the cylindrical boundary. In the limiting case of plane stress conditions the assumed stresses also satisfy the compatibility conditions. Example solutions have demonstrated the advantage of using this special element for analyzing solids with circular holes.

Pian, T. H. H.↗
DOE OSTI2020

A Virtual Element Method for the Full MHD system

In this manuscript we present a novel discretization for the incompressible MHD system. Our approach follows the framework of the Virtual Element Method and offers two main advantages. The method can be implemented in unstructured meshes making it highly versatile and capable of handling a wide array of problems involving interfaces, free-boundaries or adaptive refinements on the mesh. The second advantage involves the divergence of the magnetic field, our approach guarantees that it remains solenoidal. We include a theoretical proof of the condition on the magnetic field as well as energy estimates and a well-posedness study. The latter sheds light as to the stability properties of the method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

An Integrated Multiscale Experimental-Numerical Analysis on Reconsolidation of Salt-Clay Mixture for Disposal of Heat-Generating Waste (Final NEUP Technical Report)

The overall purpose of this research is to improve understanding of THMC coupling effect on the reconsolidation of granular (or crushed) salt-clay mixture used for seal systems of shafts and drifts in salt repositories. This proposed work is partially motivated by the recent work on the Waste Isolation Pilot Plant (WIPP) that shows the promising sealing capability of clay-salt mixture compared to crushed salt. In particular, primary emphasis is to develop a fully integrated multiscale experiment-numerical study to determine and explain what leads to the superior sealing ability of the clay-salt mixture. These research activities are designed to seek further understanding of (1) why clay additives may enhance the fluid trapping and (2) whether this flow barrier effect may prevail under different combinations of temperature, confining pressure, deviatoric stress and other foreseeable environmental factors. If successful, this enhanced flow trapping ability of the seal provides significant improvement to the seal and repository performance and therefore make the repository safer in the long-term. The experiment component includes microstructural investigation and macroscopic tests on a reconsolidated salt-clay mixture. In the microstructural study, the goal is to (1) characterize microscopic distributions of distinct phases (e.g., clay, salt crystal boundaries, trapped brine, and pore) to examine the connectivity of the pore network inside the salt-clay mixture with different amounts of clay additive and moisture content and (2) analyze multiscale imaging data to reconstruct the polycrystalline microstructures for numerical simulations. Meanwhile, macroscopic tests are performed to analyze how clay alters the failure/creep mechanisms in the salt-clay mixture. Microscopic and macroscopic experimental observations will both be used to calibrate and validate a multiscale model that explicitly simulates the capillary and multiphase flow in the connected pores and the deformation due to the presence of intra-crystalline brine at the pore scale via a new polyhedral discrete element–lattice Boltzmann method (DEM-LBM) coupling model. The pore-scale simulations are homogenized via an upscaling procedure that converts pore-scale information (e.g. force exerted on grain boundary, sliding, pressure-solution) to continuum measures (e.g. Cauchy stress, Darcy’s flow) at each integration point in the macroscopic multiphase TMHC model. This multiscale scheme will allow coupling be- tween high-fidelity simulations of brine-salt-clay interaction and the macroscopic TMHC model. The multiscale model helps the understanding of how the trapped brine inclusion affects the pressure-solution mechanism with the presence of clay and moisture. This work brings new insight into the sealing capacity of salt-clay mixture under elevated temperature over a long period of time - a key to evaluating the potential of salt-clay mixture usage for salt repositories.

42 ENGINEERING↗
NASA NTRS1979

The application of finite element techniques to acoustic transmission in lined ducts with flow

The finite element method (FEM) is used to analyze the propagation of sound in two-dimensional nonuniform ducts carrying a compressible subsonic mean flow. Galerkin and residual least squares (RLS) methods with natural and forced boundary conditions are considered. The accuracy of FEM results for the eigenvalue and transmission problems is assessed by comparison with alternative numerical schemes for nonuniform ducts. The results presented and those from associated investigations indicate that modal coupling is a significant feature of the acoustic field, especially at high Mach numbers. A multimodal model therefore appears to be essential if any reliable conclusions are to be drawn in the context of turbofan inlet regions. Improvements to the eigenvalue scheme following the implementation of higher-order Hermitian elements indicate a similar modification for the transmission problem.

Astley, R. J.↗
NASA NTRS1996

Large-eddy simulation of a backward facing step flow using a least-squares spectral element method

We report preliminary results obtained from the large eddy simulation of a backward facing step at a Reynolds number of 5100. The numerical platform is based on a high order Legendre spectral element spatial discretization and a least squares time integration scheme. A non-reflective outflow boundary condition is in place to minimize the effect of downstream influence. Smagorinsky model with Van Driest near wall damping is used for sub-grid scale modeling. Comparisons of mean velocity profiles and wall pressure show good agreement with benchmark data. More studies are needed to evaluate the sensitivity of this method on numerical parameters before it is applied to complex engineering problems.

Chan, Daniel C.↗
DOE OSTI2024

Vertical instability forecasting and controllability assessment of multi-device tokamak plasmas in DECAF with data-driven optimization

Abstract Reliable vertical position control will be an essential element of any future tokamak-based fusion power plant in order to reduce disruptions and maximize performance. We investigate methods to improve vertical controllability boundary determination in plasma operational space and demonstrate a data-driven approach based on direct pseudoinversion of operational space data that is rigorously quantitative, applicable in real-time plasma control systems, and physically intuitive to interpret. Applied to historical shot data from entire run campaigns on the MAST-U, KSTAR, and NSTX tokamaks, this approach, implemented in DECAF, improves vertical displacement event identification accuracy to 98.9%–100%. Further, we explore the application of a physics-based vertical stability metric as an early warning forecaster for vertical displacement events. The development of a linear surrogate model for the plasma current density profile, with a coefficient of determination of 0.992 on the training dataset, enables potential employment of this forecaster in real-time. The application of this approach on historical data from the MAST-U MU02 campaign yields a forecaster with 62.6% accuracy, indicating promise for this method when further refined and potentially coupled with other stability metrics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1973

Finite Element Method for Thermal Analysis

A two- and three-dimensional, finite-element thermal-analysis program which handles conduction with internal heat generation, convection, radiation, specified flux, and specified temperature boundary conditions is presented. Elements used in the program are the triangle and tetrahedron for two- and three-dimensional analysis, respectively. The theory used in the program is developed, and several sample problems demonstrating the capability and reliability of the program are presented. A guide to using the program, description of the input cards, and program listing are included.

Heuser, J.↗
NASA NTRS1976

Hybrid finite element methods

The purpose of this paper is to show how Lagrange multipliers can be used with finite elements to achieve a number of desirable properties in the underlying approximation. For elliptic boundary value problems, variational principles can be developed in which all boundary conditions are natural. In fluid flow problems, one can endow the approximations with physically essential conservation laws.

Fix, G. M.↗