Results for “border” — Page 32

NASA NTRS2022

Okefenokee Water Resources: Using Earth Observations to Assess Hydrologic Changes and Wildfire Risk in the Okefenokee Swamp

The Okefenokee Swamp is a vital ecosystem known for its protection of biodiversity, peatland carbon sinks, and recreational and economic opportunities for local residents. The swamp has experienced several wildfires since the 1990s, and new development along the borders of Okefenokee National Wildlife Refuge (ONWR) threatens to alter hydrologic activity and increase fire frequency. NASA DEVELOP partnered with staff at the ONWR to determine the feasibility of using satellite imagery to assess wildfire risk and map changes in vegetation cover. Using data from NASA satellites Landsat 7 Enhanced Thematic Mapper Plus (ETM+) and Landsat 8 Operational Land Imager (OLI), Soil Moisture Active Passive (SMAP) data from the USDA’s Crop Condition and Soil Moisture Analytics Tool (Crop-CASMA), European Space Agency (ESA) Sentinel-1 C-Band Synthetic Aperture Radar (C-SAR), and Sentinel-2 Multispectral Instrument (MSI), the DEVELOP team assessed the relationship between hydrologic change, vegetation cover, and wildfire risk in the swamp. Results showed that the southern portion of ONWR has been burned the most since 1990 and has greater water stability than other areas of the refuge. The team also found that the largest pockets of mature forests remain in the northernmost regions. Soil moisture anomaly readings may serve as an indicator of fire conditions. The team used these results to create a vegetation map, a swamp water visibility time series map, a historical wildfire correlation analysis, and a methodology tutorial. These products will assist the ONWR in making informed management decisions about the future of the Okefenokee Swamp.

Brianne Kendall↗

NASA NTRSDate not supplied

Additional characterization of Libya-4 in support of post-launch vicarious calibration of satellite imagers

Libya-4 (28.55° N and 23.39° E) is one of the most characterized and utilized Pseudo Invariant Calibration Site (PICS) for post-launch radiometer drift monitoring and sensor pair radiometric scaling. Libya-4 is one of the driest and most reflective PICS located in an extensive sand dune region void of any vegetation with an elevation of 118 m. It is positioned near the northeast border with Egypt. With minimal cloud cover and the monthly mean precipitation of ~ 1mm, Libya-4 is one of the temporally, spectrally, and spatially stable CEOS recommended PICS and Cosnefroy et al. 1996 identified sites. The Libya-4 PICS has been extensively used for post-launch radiometric calibration and validation of high-, medium, and low-resolution satellite imagers, including Landsat, MODIS, VIIRS, and Meteosats. The CERES Imager and Geostationary Calibration Group (IGCG) at NASA LaRC utilizes Libya-4 to perform an independent assessment of the radiometric stability of the MODIS and VIIRS L1B products. The site is also used for absolute radiometric scaling between MODIS, VIIRS, and geostationary imagers to ensure consistent cloud and radiative flux retrievals. Multi-year Terra-MODIS, Aqua-MODIS , NPP-VIIRS and Metoesat-7 observations over Libya-4 show very similar TOA reflectance temporal variability. Although, the surface reflectance and atmospheric column varies seasonally, the inter-annual variability of the seasonal cycle should be small. Especially during 2013, the Libya-4 TOA reflectance was found to be greater than usual in all 4 satellite records. Preliminary comparisons with mean wind speed and aerosol optical depth (AOD) indicate that the year 2013 is marked by elevated levels of both conditions. The goal of this study is to tie the Libya-4 visible reflectance inter-annual variability with corresponding meteorological measurements to further improve the characterization of the site.

David R. Doelling↗

NASA NTRS2022

Drill-Site Selection for Cosmogenic-Nuclide Exposure Dating of the Bed of the Greenland Ice Sheet

Direct observations of the size of the Greenland Ice Sheet during Quaternary interglaciations are sparse yet valuable for testing numerical models of ice-sheet history and sea level contribution. Recent measurements of cosmogenic nuclides in bedrock from beneath the Greenland Ice Sheet collected during past deep-drilling campaigns reveal that the ice sheet was significantly smaller, and perhaps largely absent, sometime during the past 1.1 million years. These discoveries from decades-old basal samples motivate new, targeted sampling for cosmogenic-nuclide analysis beneath the ice sheet. Current drills available for retrieving bed material from the US Ice Drilling Program require < 700 m ice thickness and a frozen bed, while quartz-bearing bedrock lithologies are required for measuring a large suite of cosmogenic nuclides. We find that these and other requirements yield only ∼ 3.4 % of the Greenland Ice Sheet bed as a suitable drilling target using presently available technology. Additional factors related to scientific questions of interest are the following: which areas of the present ice sheet are the most sensitive to warming, where would a retreating ice sheet expose bare ground rather than leave a remnant ice cap, and which areas are most likely to remain frozen bedded throughout glacial cycles and thus best preserve cosmogenic nuclides? Here we identify locations beneath the Greenland Ice Sheet that are best suited for potential future drilling and analysis. These include sites bordering Inglefield Land in northwestern Greenland, near Victoria Fjord and Mylius-Erichsen Land in northern Greenland, and inland from the alpine topography along the ice margin in eastern and northeastern Greenland. Results from cosmogenic-nuclide analysis in new sub-ice bedrock cores from these areas would help to constrain dimensions of the Greenland Ice Sheet in the past.

Greenland↗

NASA NTRSDate not supplied

Additional Characterization of Sonoran Pics in Support of A Stable Multi-Sensor Geostationary Imager Record

The Sonoran Desert is the most utilized Pseudo Invariant Calibration Site (PICS) located in the Americas for post-launch radiometer drift monitoring and sensor pair radiometric scaling. The Sonoran Desert is located near the US Arizona and Mexican border with an elevation of 37 m. The site has small spatial and angular variations; however, soil moisture can cause short- term periodic reflectance fluctuations. The NASA Clouds and the Earth’s Radiant Energy System (CERES) project utilizes the site to validate the GOES East and West imager calibration coefficients derived from inter-calibrating GOES with MODIS. Because the daily local noon angular solar and viewing angles repeat every year over the site, a daily exoatmospheric radiance model (DERM) can be constructed over the lifetime of a well-calibrated GOES sensor. DERM based on a well-calibrated GOES imager can then be used to determine the calibration coefficients of successive GOES imagers to provide a stable multi-sensor GOES imager record. This will ensure that the GOES retrieved clouds and derived broadband fluxes can be used to infer the regional diurnal cycle in between Terra and Aqua CERES measurements to accurately compute the daily mean regional fluxes and clouds over the 20-year CERES SYN1deg product. Although the Sonoran Desert surface reflectance and atmospheric column vary seasonally, the inter-annual variability of the seasonal cycle is small, but it adds noise to the resulting DERM calibration coefficients. We seek to reduce the uncertainty of the DERM approach by improving the clear-sky filtering and correlating the observed interannual reflectance variability with atmospheric parameters, such as precipitable water, ozone concentration, and aerosol optical depth. The additional characterization of the Sonoran Desert site DERM for both the GOES East and West positions should improve the accuracy of the CERES SYN1deg product clouds and fluxes.

Prathana Khakurel↗

NASA NTRSDate not supplied

Evolution of Dendritic Extended 3D Patterns during Directional Solidification: Microgravity Experiments in DECLIC-DSI onboard ISS and Phase-field Modeling

To characterize the dynamical formation of three-dimensional (3D) arrays of dendrites under diffusive growth conditions, in situ monitoring of a series of experiments on a transparent succinonitrile – 0.46 wt% camphor model alloy was carried out under low gravity in the DECLIC Directional Solidification Insert onboard the International Space Station. These experiments offer continuous interface observation and enable the construction of space-time evolution maps of dendrite location and primary spacing during directional solidification. We present the evolution of dendritic extended 3D patterns for a large range of parameters displaying different levels of side branching in both experiments and phase-field simulations. The combined and separate effects of macroscopic interface curvature and crystal mis-orientation are evidenced and detailed. In addition, the aligned dendritic array caused by the invasion of dendrites formed at the edge of the crucible border is investigated.

Kaihua Ji↗

NASA NTRS2023

Safety Case for Small Uncrewed Aircraft Systems (sUAS) Beyond Visual Line of Sight (BVLOS) Operations at NASA Langley Research Center

This Technical Memorandum (TM) is written to provide for dissemination of the methods and safety considerations for operations of small Uncrewed Aerial Systems (sUAS) Beyond Visual Line-of-Sight (BVLOS)at NASA Langley Research Center. It includes the Safety Case used to acquire a BVLOS Certificate of Authorization (COA) from the FAA and is being published to enable others to benefit from this work. The intended operations, subject to approval from the Federal Aviation Administration (FAA) and the National Aeronautics and Space Administration (NASA), will include a combination of Within Visual Line of Sight (WVLOS) and Beyond Visual Line of Sight (BVLOS) flights, comprising of at most five sUAS operating concurrently, with no more than three operating BVLOS. Flights will occur in a subset of the Langley Air Force Base (LAFB) Class D airspace (KLFI) at a maximum altitude of 400 ft AGL. Most operations within this subset will take place in the City Environment Range Testing for Autonomous Integrated Navigation (CERTAIN) Range. The CERTAIN Range includes airspace inside the borders of NASA Langley Research Center (LaRC). Additional airspace over the northern section of CERTAIN will be requested as part of the Certificate of Authorization (COA). NASA LaRC BVLOS operations on the CERTAIN Range can be broken down into five critical components needed to meet the 14 CFR § 91.113 see and avoid requirement: 1) procedural deconfliction with LAFB for UAS operations at or below 400 ft and manned aircraft at or above 900’ AGL; 2) ground equipment for detection of intruder aircraft and to support communications between crewmembers ; 3) sUAS vehicles with advanced onboard automation capable of autonomously maintaining safe separation; 4) BVLOS standardized operating procedures (SOPs); 5) and personnel to execute the flight operations in accordance with the SOPs and respond to airborne contingencies. The introduction of new ground equipment includes the use of the Remote Operations for Autonomous Missions (ROAM) UAS Operations Center, development and use of an Integrated Airspace Display (IAD), use of the L-STAR and GA-9120 radars, and the incorporation of standardized Vertiports. The ROAM Operations Center will be the central point for all BVLOS sUAS operations. All command and control (C2), voice communications and airspace awareness displays will reside inside ROAM. The IAD will provide raw data from ADS-B, FLARM, radar tracks and telemetered GPS vehicle positions for interpretation by an Airspace Monitor. The radars will search the class D airspace around the CERTAIN Range and serve as a backup to procedural deconfliction procedures coordinated with LAFB. In the event of a procedural deconfliction breakdown, radar detections of non-participating aircraft will be available so that the 91.113 see and avoid requirement can still be safely met. Finally, the incorporation of Vertiports will have video and network connectivity that enables large numbers of sUAS launches and recoveries from a single location. This is a continuation of the remote command and control of unpiloted aircraft component focused on evaluating unpiloted aircraft flight crew roles and responsibilities, control interfaces and the associated data links needed to operate a fleet of aircraft within a UAM Ecosystem. This work supports the development of future aviation operational concepts based on an Urban Air Mobility Maturity Level (UML) 4 environment (Patterson, 2020). It is assumed that future airspace will include hundreds of simultaneous aircraft operations within the airspace, therefore scalable operations are essential for enabling this future airspace to become a reality. Follow on work includes envisioned flights that expand operations beyond the CERTAIN range and lead to an effective Maritime Surveillance capability.

Matthew W Coldsnow↗

NASA NTRS2023

NDARC - NASA Design and Analysis of Rotorcraft: Input - Appendix 3

The NDARC code performs design and analysis tasks. The design task involves sizing the rotorcraft to satisfy specified design conditions and missions. The analysis tasks can include off-design mission performance analysis, flight performance calculation for point operating conditions, and generation of subsystem or component performance maps. Figure 1-1 illustrates the tasks. The principal tasks (sizing, mission analysis, flight performance analysis) are shown in the figure as boxes with heavy borders. Heavy arrows show control of subordinate tasks. The aircraft description (figure 1-1) consists of all the information, input and derived, that defines the aircraft. The aircraft consists of a set of components, including fuselage, rotors, wings, tails, and propulsion. This information can be the result of the sizing task; can come entirely from input, for a fixed model; or can come from the sizing task in a previous case or previous job. The aircraft description information is available to all tasks and all solutions (indicated by light arrows). The sizing task determines the dimensions, power, and weight of a rotorcraft that can perform a specified set of design conditions and missions. The aircraft size is characterized by parameters such as design gross weight, weight empty, rotor radius, and engine power available. The relations between dimensions, power, and weight generally require an iterative solution. From the design flight conditions and missions, the task can determine the total engine power or the rotor radius (or both power and radius can be fixed), as well as the design gross weight, maximum takeoff weight, drive system torque limit, and fuel tank capacity. For each propulsion group, the engine power or the rotor radius can be sized. Missions are defined for the sizing task, and for the mission performance analysis. A mission consists of a number of mission segments, for which time, distance, and fuel burn are evaluated. For the sizing task, certain missions are designated to be used for design gross weight calculations; for transmission sizing; and for fuel tank sizing. The mission parameters include mission takeoff gross weight and useful load. For specified takeoff fuel weight with adjustable segments, the mission time or distance is adjusted so the fuel required for the mission (burned plus reserve) equals the takeoff fuel weight. The mission iteration is on fuel weight or energy. Flight conditions are specified for the sizing task, and for the flight performance analysis. For the sizing task, certain flight conditions are designated to be used for design gross weight calculations; for transmission sizing; for maximum takeoff weight calculations; and for antitorque or auxiliary thrust rotor sizing. The flight condition parameters include gross weight and useful load. For flight conditions and mission takeoff, the gross weight can be maximized, such that the power required equals the power available. A flight state is defined for each mission segment and each flight condition. The aircraft performance can be analyzed for the specified state, or a maximum effort performance can be identified. The maximum effort is specified in terms of a quantity such as best endurance or best range, and a variable such as speed, rate of climb, or altitude. The aircraft must be trimmed, by solving for the controls and motion that produce equilibrium in the specified flight state. Different trim solution definitions are required for various flight states. Evaluating the rotor hub forces may require solution of the blade flap equations of motion.

NDARC↗

NASA NTRS2023

Changing Nature of High-Impact Snowfall Events in Eastern North America

Snowstorms cause substantial disruption in the eastern United States and Canada each winter. While reductions in annual snowfall are projected over most of this region due to anthropogenic global warming, daily snowfall extremes that have the greatest impact may not decrease in the same manner. We examine changes to two extreme snowfall metrics: the 95th percentile of daily snowfall (SF95, cm) and the number of events during which 10% of the mean annual snowfall is exceeded during a single day (TC10, events yr−1). We explore changes to these metrics in two ensembles of the fifth-generation Canadian Regional Climate Model (CRCM5), including four 0.22° ( ≈ 25 km) simulations driven by different coupled general circulation models as well as the higher-resolution (0.11°, ≈ 12 km) ClimEx ensemble, driven by 50 members of a large initial-condition ensemble of one global model. We find that while mean annual snowfall is projected to decrease over our domain, SF95 is projected to remain relatively constant, suggesting that the most extreme daily snowfalls currently observed are likely to occur even in a warmer future climate. The region of the largest TC10 values exhibits a northward shift, with a larger percentage of annual snowfall occurring during a few large events along the U.S.-Canada border. These projected changes to the nature of snowfall events may have important socioeconomic consequences in this densely populated region of North America.

heavy snow↗

NASA NTRS2022

GJ 229B: Solving the Puzzle of the First Known T Dwarf with the APOLLO Retrieval Code

GJ 229B was the first T dwarf to be discovered in 1995, and its spectrum has been more thoroughly observed than that of most other brown dwarfs. Yet a full spectroscopic analysis of its atmosphere has not been done with modern techniques. This spectrum has several peculiar features, and recent dynamical estimates of GJ 229B’s mass and orbit have disagreed widely, both of which warrant closer investigation. With a separation of tens of astronomical units from its host star, GJ 229B falls near the border of the planet and stellar population formation regimes, so its atmosphere could provide clues to formation processes for intermediate objects of this type. In an effort to resolve these questions, we performed retrievals on published spectra of GJ 229B over a wide range of wavelengths (0.5–5.1 μm) using the open-source APOLLO code. Based on these retrievals, we present a more precise mass estimate of 41.6 ± 3.3MJ and an effective temperature estimate of 869 +5 −7 K, which are more consistent with evolutionary models for brown dwarfs and suggest an older age for the system of >1.0 Gyr. We also present retrieved molecular abundances for the atmosphere, including replicating the previously observed high CO abundance, and discuss their implications for the formation and evolution of this object. This retrieval effort will give us insight into how to study other brown dwarfs and directly imaged planets, including those observed with JWST and other next-generation telescopes.

Alex R Howe↗

NASA NTRS2024

Expanding Impact with the James Webb Space Telescope: Combining Art, Science, and Technology for Public Outreach

This archived content may contain outdated information or references that may not reflect current policy or programs. NASA’s James Webb Space Telescope revealed its first images on July 12, 2022 and has been used for groundbreaking science since. Scientific exploration transcends international borders, making a mission like Webb feasible with collaborators including the European Space Agency (ESA), and Canadian Space Agency (CSA). Communication about NASA’s discoveries about the universe, so essential for involving the public, likewise needs to be inclusive to all. Art is a tool for cutting across the boundaries of language, culture, and ability, and serves as a bridge between the technical and non-technical communities. Art makes the beauty and nuance of science and engineering accessible in ways that may not be readily perceived to those outside of those communities of practice. Equitable and inclusive outreach endeavors are challenging to implement while considering language translations, culture context, sensory methods, and technology capabilities. Formats including “Unfolding the Universe'' virtual reality platform has allowed for a wider audience to interact with the Webb images including sounds, visual aids, and talks by the scientists and engineers who worked on Webb. This VR platform has been expanded to highlight the ESA contributors to the mission and will be showcased internationally. The Webb first images were also translated into sounds as a method of inclusion for anyone with sight disabilities. We will explore some successful outreach methods and suggestions for inclusivity in future.

Outreach↗

NASA NTRSDate not supplied

Uranus Flagship-class Orbiter and Probe Using Aerocapture

Exploration of the Ice Giants, especially Uranus, via orbiter and atmospheric probes, is required to answer pressing science questions that have been raised in the latest National Academies of Sciences Planetary Decadal Survey. Since the Ice Giants are the farthest planets from Earth, traditional fully-propulsive orbit insertion missions have transit times to the planetary bodies bordering 13-15 years and require a large amount of propellant (wet mass percentages of around 60-70%) for the orbit insertion maneuver, leaving less mass for the scientific payload and a planetary probe. Aerocapture uses aerodynamic forces generated by flight within a planetary atmosphere to decelerate and achieve orbit insertion. Aerocapture has been considered for several past missions but it has not been demonstrated. However, recent developments in thermal protection systems (TPS), guidance and control (G&C), and interplanetary navigation capabilities show the potential for using rigid, heritage entry vehicle configurations already flown at other planetary bodies for Ice Giants aerocapture. Aerocapture can robustly deliver spacecraft to Ice Giant orbits, while substantially increasing on-orbit payload mass (more than 40%) that can be used for a robust atmospheric entry probe. Additionally, the aerocapture maneuver would reduce the interplanetary transit time by 2-5 years (15-30%) relative to fully-propulsive orbit insertion. Recent work has shown that a flagship-class mission can be conducted in a shorter time than fully-propulsive missions if using aerocapture. This paper will consider the merits of including aerocapture as the orbit-insertion mechanism for a Uranus mission. Specifically, the implications of aerocapture orbit insertion for in-situ atmospheric probes will be discussed. The Uranus Orbiter and Probe concept mission study [3] is considered as the potential payload. Results from a recent NASA Space Technology Mission Directorate (STMD)-funded activity that is designing an aerocapture mission for a Uranus orbiter will be presented.

Soumyo Dutta↗

NASA NTRSDate not supplied

Uranus Flagship-class Orbiter and Probe Using Aerocapture

Exploration of the Ice Giants, especially Uranus, via orbiter and atmospheric probes, is required to answer pressing science questions that have been raised in the latest National Academies of Sciences Planetary Decadal Survey. Since the Ice Giants are the farthest planets from Earth, traditional fully-propulsive orbit insertion missions have transit times to the planetary bodies bordering 13-15 years and require a large amount of propellant (wet mass percentages of around 60-70%) for the orbit insertion maneuver, leaving less mass for the scientific payload and a planetary probe. Aerocapture uses aerodynamic forces generated by flight within a planetary atmosphere to decelerate and achieve orbit insertion. Aerocapture has been considered for several past missions but it has not been demonstrated. However, recent developments in thermal protection systems (TPS), guidance and control (G&C), and interplanetary navigation capabilities show the potential for using rigid, heritage entry vehicle configurations already flown at other planetary bodies for Ice Giants aerocapture. Aerocapture can robustly deliver spacecraft to Ice Giant orbits, while substantially increasing on-orbit payload mass (more than 40%) that can be used for a robust atmospheric entry probe. Additionally, the aerocapture maneuver would reduce the interplanetary transit time by 2-5 years (15-30%) relative to fully-propulsive orbit insertion. Recent work has shown that a flagship-class mission can be conducted in a shorter time than fully-propulsive missions if using aerocapture. This paper will consider the merits of including aerocapture as the orbit-insertion mechanism for a Uranus mission. Specifically, the implications of aerocapture orbit insertion for in-situ atmospheric probes will be discussed. The Uranus Orbiter and Probe concept mission study [3] is considered as the potential payload. Results from a recent NASA Space Technology Mission Directorate (STMD)-funded activity that is designing an aerocapture mission for a Uranus orbiter will be presented.

Soumyo Dutta↗

NASA NTRSDate not supplied

Impact of Canadian Wildfires on Mid Atlantic’s Region Air Quality: An Analysis Using ASDC Data

Wildfires pose a growing concern in North America due to their harmful impacts on air quality and public health, with increased wildfire activity in recent years leading to widespread smoke plumes that can transcend borders. The exposure of New York City (NYC), the most populous city in North America, to Canadian wildfire smoke highlights the substantial implications for public health and urban environments. To better understand the impact of Canadian wildfires on air quality in NYC, satellite data from the NASA Atmospheric Science Data Center (ASDC) at Langley Research Center, along with ground-based measurements and atmospheric modeling results, are analyzed. We examine concentrations of atmospheric aerosols—particularly PM2.5 particulate matter originating from Canadian wildfires—their dispersion patterns, and the duration and intensity of smoke events impacting NYC. Data from multiple satellites, such as those from the Earth Polychromatic Imaging Camera (EPIC), are synergistically used to identify regions affected by wildfires and estimate aerosol loading. Ground-based measurements, including data from air quality monitoring stations, provide localized information for validation and calibration purposes. The findings of this study contribute to our understanding of the impact of Canadian wildfires on NYC's air quality and emphasize the importance of monitoring and prediction of transboundary smoke events using data synthesized from multiple sources, such as those provided by the ASDC. This information is crucial for policymakers, public health officials, and residents in affected areas to develop effective strategies for mitigating the health risks associated with wildfire smoke and improving air quality during wildfire seasons. The utilization of ASDC data in this research highlights the critical role of atmospheric remote sensing in addressing the challenges posed by wildfires and their consequences on regional scales.

Ingrid Garcia-Solera↗

NASA NTRSDate not supplied

Analyzing the Impact of Canadian Wildfires on Air Quality in the U.S. Mid-Atlantic: with Data and Tools from NASA’s Atmospheric Sciences Data Center

Wildfires pose a growing concern in North America due to their harmful impacts on air quality and public health, with increased wildfire activity in recent years leading to widespread smoke plumes that can transcend borders. The exposure of New York City (NYC), the most populous city in North America, to Canadian wildfire smoke highlights the substantial implications for public health and urban environments. To better understand the impact of Canadian wildfires on air quality in NYC, satellite data from the NASA Atmospheric Science Data Center (ASDC) at Langley Research Center, along with ground-based measurements and atmospheric modeling results, are analyzed. We examine concentrations of atmospheric aerosols—particularly PM2.5 particulate matter originating from Canadian wildfires—their dispersion patterns, and the duration and intensity of smoke events impacting NYC. Data from multiple satellites, such as those from the Earth Polychromatic Imaging Camera (EPIC), are synergistically used to identify regions affected by wildfires and estimate aerosol loading. Ground-based measurements, including data from air quality monitoring stations, provide localized information for validation and calibration purposes. The findings of this study contribute to our understanding of the impact of Canadian wildfires on NYC's air quality and emphasize the importance of monitoring and prediction of transboundary smoke events using data synthesized from multiple sources, such as those provided by the ASDC. This information is crucial for policymakers, public health officials, and residents in affected areas to develop effective strategies for mitigating the health risks associated with wildfire smoke and improving air quality during wildfire seasons. The utilization of ASDC data in this research highlights the critical role of atmospheric remote sensing in addressing the challenges posed by wildfires and their consequences on regional scales.

Ingrid Garcia-Solera↗

NASA NTRSDate not supplied

Equitable and Inclusive Public Outreach with the James Webb Space Telescope: Combining Art, Science, and Technology

This archived content may contain outdated information or references that may not reflect current policy or programs. NASA’s James Webb Space Telescope revealed its first images on July 12, 2022 and has been used for groundbreaking science since. Scientific exploration transcends international borders, making a mission like Webb feasible with collaborators including the European Space Agency (ESA), and Canadian Space Agency (CSA). Communication about NASA’s discoveries about the universe, so essential for involving the public, likewise needs to be inclusive to all. Art is a tool for cutting across the boundaries of language, culture, and ability, and serves as a bridge between the technical and non-technical communities. Art makes the beauty and nuance of science and engineering accessible in ways that may not be readily perceived to those outside of those communities of practice. Equitable and inclusive outreach endeavors are challenging to implement while considering language translations, culture context, sensory methods, and technology capabilities. Formats including “Unfolding the Universe'' virtual reality platform has allowed for a wider audience to interact with the Webb images including sounds, visual aids, and talks by the scientists and engineers who worked on Webb. This VR platform has been expanded to highlight the ESA contributors to the mission and will be showcased internationally. The Webb first images were also translated into sounds as a method of inclusion for anyone with sight disabilities. We will explore some successful outreach methods and suggestions for inclusivity in future.

Outreach↗

NASA NTRSDate not supplied

Impact of Canadian Wildfires 2023 on North Atlantic's Region Air Quality: An Analysis Using ASDC Data

Wildfires pose a growing concern in North America due to their harmful impacts on air quality and public health, with increased wildfire activity in recent years leading to widespread smoke plumes that can transcend borders. The exposure of New York City (NYC), the most populous city in North America, to Canadian wildfire smoke highlights the substantial implications for public health and urban environments. To better understand the impact of Canadian wildfires on air quality in NYC, satellite data from the NASA Atmospheric Science Data Center (ASDC) at Langley Research Center, along with ground-based measurements and atmospheric modeling results, are analyzed. NASA's Atmospheric Science Data Center (ASDC) is in the Science Directorate located at NASA'S Langley Research Center in Hampton, Virginia. The Science Directorate's Climate Science Branch, Atmospheric Composition Branch, and Chemistry and Dynamics Branch work with ASDC to study changes in the Earth and its atmosphere. ASDC projects focus on the Earth science disciplines: Radiation Budget, Clouds, Aerosols, and Tropospheric Composition. All the products chosen for this analysis are products hosted by ASDC and available for users to obtain via our services [1].

Hazem Mahmoud↗

NASA NTRS2024

Big Bend Ecological Forecasting: Integrating Earth Observations Into Invasive Species Management Decisions in Big Bend National Park in Texas

Located in Brewster County Texas, U.S., along the Texas-Mexico border, Big Bend National Park is 3,243 square kilometers of desert, mountains, and rivers. NASA’s MSFC Spring 2024 DEVELOP Team partnered with the National Park Service (NPS), to address the environmental concern of perineal invasive grasses in Big Bend National Park. Buffelgrass (Cenchrus ciliaris), introduced to the park in the 1940’s, poses an ongoing threat, and causes habitat destruction for many of the park’s native ecosystems. Buffelgrass amplifies fire risk in the park, aids in the destruction of historic structures, and alters stream channels. To address the rising concern of Buffelgrass presence, unique advanced spatial technique applications were necessary to construct a habitat suitability model and perform a comprehensive fire risk assessment. A habitat suitability model was developed considering climate, vegetation, and phenological variables, in addition to physical and topographical variables. Subsequently, a fire risk model was developed, taking into account fire history data, accessibility factors, climate trends and predictions, along with developed areas. Multi-Source Land Surface Phenology (LSP) Sentinel-2 and Landsat 8 Operational Land Imager (OLI) imagery were used to predict Buffelgrass hotspot locations throughout the park. These analyses allowed the identification of optimal Buffelgrass habitat and hotspot locations, as well as park zones that reflect the greatest risk for future Buffelgrass invasion and fire risk. The collective results of the habitat suitability model, fire risk assessment, and Buffelgrass hot spot identification will allow the NPS to facilitate efficient mitigation measures and management strategies, and improved resource allocation where it’s most needed.

remote sensing↗

NASA NTRSDate not supplied

Low-Speed Testing of the 5.2% Semispan CRM-HL in the DNW-NWB Wind Tunnel

In this paper the wind tunnel test of the 5.2% CRM-HL in the DNW-NWB low speed wind tunnel is described. The tunnel test campaign is settled in the DLR project ADaMant, in which it is of interest to generate qualitative data for CFD validation to improve the predictive accuracy, efficiency, and usability of physical modeling in CFD codes at the borders of the flight envelope. Different configurations of the CRM-HL were tested in a closed as well as in an open test section of the wind tunnel. Several measurement techniques were used to generate validation data including forces and moments, pressures, flow visualization with tufts and oil painting, and infrared thermography for boundary layer transition detection. The evaluation of the results focuses on these techniques in the closed test section. The test comprises Mach numbers from 0.15 to 0.23 and Reynolds numbers from 1.2x10 6 to 1.2x10 6 . Some results are also compared to data from the NASA Langley Research Center 14x22 Foot wind tunnel to assess the repeatability of measurements of the same model in different wind tunnels.

DLR↗