Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “bit error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Radio Frequency Interference (RFI) in Digital Microwave Radiometers

Here we developed a model for determining the effects of narrowband RFI on low resolution digital correlators. Low resolution correlators rely on a theoretical inversion to obtain the input correlation coefficient from the digital output. This inversion is based on the Gaussian statistics of the input signals. In the presence of narrow-band interference, the statistics are not Gaussian and the theoretical inversion is no longer valid. The result is an error in the correlator output. We studied this phenomena for four correlator resolutions: 1, 1.5, 2, and 4 bits. The errors are significant for 1, 1.5, and 2-bit systems. We found in the presence of relatively strong interference (INR approximately greater than 0 dB) the errors can be ten's of percent. The error reduces to less than 0.03% for INR less than -16 dB. For the four-bit correlators, the errors are less than 0.03% for all cases studied. The error is also nonlinearly dependent upon input correlation coefficient.

Piepmeier, Jeffrey R.↗

A study of high density bit transition requirements versus the effects on BCH error correcting coding

Several methods for increasing bit transition densities in a data stream are summarized, discussed in detail, and compared against constraints imposed by the 2 MHz data link of the space shuttle high rate multiplexer unit. These methods include use of alternate pulse code modulation waveforms, data stream modification by insertion, alternate bit inversion, differential encoding, error encoding, and use of bit scramblers. The psuedo-random cover sequence generator was chosen for application to the 2 MHz data link of the space shuttle high rate multiplexer unit. This method is fully analyzed and a design implementation proposed.

Ingels, F.↗

An estimation algorithm with learning feature for an adaptive bit synchronizer.

Description of an on-line optimal (in the sense of linear minimum mean square error) sequential bit synchronizer assuming minimal a priori knowledge of the incoming data. The adaptive synchronization algorithms, implemented on a small computer, are capable of accurately estimating pulse transition time, pulse amplitude, and pulse width by invoking the powerful Gauss-Markov theorem. Numerous simulations indicate that the performance of the synchronizer is satisfactory from the point of view of the amount of data required and the speed of convergence.

Chow, L. R.↗

Quasiprobabilistic Readout Correction of Midcircuit Measurements for Adaptive Feedback via Measurement Randomized Compiling

Quantum measurements are a fundamental component of quantum computing. However, on present-day quantum computers, measurements can be more error prone than quantum gates and are susceptible to nonunital errors as well as nonlocal correlations due to measurement crosstalk. While readout errors can be mitigated in postprocessing, this is inefficient in the number of qubits due to a combinatorially large number of possible states that need to be characterized. In this work, we show that measurement errors can be tailored into a simple stochastic error model using randomized compiling, enabling the efficient mitigation of readout errors via quasiprobability distributions reconstructed from the measurement of a single preparation state in an exponentially large confusion matrix. We demonstrate the scalability and power of this approach by correcting readout errors without matrix inversion on a large number of different preparation states applied to a register of eight superconducting transmon qubits. Moreover, we show that this method can be extended to midcircuit measurements used for active feedback via quasiprobabilistic error cancellation, and we demonstrate the correction of measurement errors on an ancilla qubit used to detect and actively correct bit-flip errors on an entangled memory qubit. Our approach enables the correction of readout errors on large numbers of qubits and offers a strategy for correcting readout errors in adaptive circuits in which the results of midcircuit measurements are used to perform conditional operations on nonlocal qubits in real time.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Machine learning for continuous quantum error correction on superconducting qubits

Abstract Continuous quantum error correction has been found to have certain advantages over discrete quantum error correction, such as a reduction in hardware resources and the elimination of error mechanisms introduced by having entangling gates and ancilla qubits. We propose a machine learning algorithm for continuous quantum error correction that is based on the use of a recurrent neural network to identify bit-flip errors from continuous noisy syndrome measurements. The algorithm is designed to operate on measurement signals deviating from the ideal behavior in which the mean value corresponds to a code syndrome value and the measurement has white noise. We analyze continuous measurements taken from a superconducting architecture using three transmon qubits to identify three significant practical examples of non-ideal behavior, namely auto-correlation at temporal short lags, transient syndrome dynamics after each bit-flip, and drift in the steady-state syndrome values over the course of many experiments. Based on these real-world imperfections, we generate synthetic measurement signals from which to train the recurrent neural network, and then test its proficiency when implementing active error correction, comparing this with a traditional double threshold scheme and a discrete Bayesian classifier. The results show that our machine learning protocol is able to outperform the double threshold protocol across all tests, achieving a final state fidelity comparable to the discrete Bayesian classifier.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Least Reliable Bits Coding (LRBC) for high data rate satellite communications

An analysis and discussion of a bandwidth efficient multi-level/multi-stage block coded modulation technique called Least Reliable Bits Coding (LRBC) is presented. LRBC uses simple multi-level component codes that provide increased error protection on increasingly unreliable modulated bits in order to maintain an overall high code rate that increases spectral efficiency. Further, soft-decision multi-stage decoding is used to make decisions on unprotected bits through corrections made on more protected bits. Using analytical expressions and tight performance bounds it is shown that LRBC can achieve increased spectral efficiency and maintain equivalent or better power efficiency compared to that of Binary Phase Shift Keying (BPSK). Bit error rates (BER) vs. channel bit energy with Additive White Gaussian Noise (AWGN) are given for a set of LRB Reed-Solomon (RS) encoded 8PSK modulation formats with an ensemble rate of 8/9. All formats exhibit a spectral efficiency of 2.67 = (log2(8))(8/9) information bps/Hz. Bit by bit coded and uncoded error probabilities with soft-decision information are determined. These are traded with with code rate to determine parameters that achieve good performance. The relative simplicity of Galois field algebra vs. the Viterbi algorithm and the availability of high speed commercial Very Large Scale Integration (VLSI) for block codes indicates that LRBC using block codes is a desirable method for high data rate implementations.

Vanderaar, Mark↗

The undetected error probability for shortened hamming codes

Hamming or shortened Hamming codes are widely used for error detection in data communications. For example, the CCITT (International Telegraph and Telephone Consultative Committee) recommendation X.25 for packet-switched data networks adopts a distance-4 cyclic Hamming code with 16 parity-check bits for error detection. The natural length of this code is n = 2(15)-1 = 32,767. In practice the length of a data packet is no more than a few thousand bits which is much shorter than the natural length of the code. Consequently, a shortened version of thecode is used. Often the length of a data packet varies, say from a few hundred bits to a few thousand bits, hence the code must be shortened by various degrees. Shortening affects the performance of the code. The error-detection performance of shortened Hamming codes, particularly the codes obtained from the distance-4 Hamming codes adopted by CCITT recommendation X.25, is investigated. A method for computing the probability of an undetected error is presented.

Costello, D. J., Jr.↗

Real-time combiner loss

Telemetry signals from several channels are aligned in time and combined by the Real-Time Combiner (RTC) in order to increase the strength of the total signal. In this article, the impact of the timing jitter in the RTC on the bit/symbol error rate is investigated. Equations are derived for the timing jitter loss associated with the coded and uncoded channels. Included are curves that depict the bit-symbol error rate vs. E sub b/N sub 0 and E sub s/N sub 0 for some typical telemetry conditions. The losses are typically below 0.1 dB.

Simon, M. K.↗

A Logarithmic Bayesian Approach to Quantum Error Detection

We consider the problem of continuous quantum error correction from a Bayesian perspective, proposing a pair of digital filters using logarithmic probabilities that are able to achieve near-optimal performance on a three-qubit bit-flip code, while still being reasonable to implement on low-latency hardware. These practical filters are approximations of an optimal filter that we derive explicitly for finite time steps, in contrast with previous work that has relied on stochastic differential equations such as the Wonham filter. By utilizing logarithmic probabilities, we are able to eliminate the need for explicit normalization and can reduce the Gaussian noise distribution to a simple quadratic expression. The state transitions induced by the bit-flip errors are modeled using a Markov chain, which for log-probabilities must be evaluated using a LogSumExp function. We develop the two versions of our filter by constraining this LogSumExp to have either one or two inputs, which favors either simplicity or accuracy, respectively. Using simulated data, we demonstrate that the single-term and two-term filters are able to significantly outperform both a double threshold scheme and a linearized version of the Wonham filter in tests of error detection under a wide variety of error rates and time steps.

97 MATHEMATICS AND COMPUTING↗

Simultaneous message framing and error detection

Circuitry simultaneously inserts message framing information and detects noise errors in binary code data transmissions. Separate message groups are framed without requiring both framing bits and error-checking bits, and predetermined message sequence are separated from other message sequences without being hampered by intervening noise.

Frey, A. H., Jr.↗

A Visual Comparison of Silent Error Propagation

High-performance computing (HPC) systems play a critical role in facilitating scientific discoveries. Their scale and complexity (e.g., the number of computational units and software stack) continue to grow as new systems are expected to process increasingly more data and reduce computing time. However, with more processing elements, the probability that these systems will experience a random bit-flip error that corrupts a program's output also increases, which is often recognized as silent data corruption. Analyzing the resiliency of HPC applications in extreme-scale computing to silent data corruption is crucial but difficult. An HPC application often contains a large number of computation units that need to be tested, and error propagation caused by error corruption is complex and difficult to interpret. Here, to accommodate this challenge, we propose an interactive visualization system that helps HPC researchers understand the resiliency of HPC applications and compare their error propagation. Our system models an application's error propagation to study a program's resiliency by constructing and visualizing its fault tolerance boundary. Coordinating with multiple interactive designs, our system enables domain experts to efficiently explore the complicated spatial and temporal correlation between error propagations. At the end, the system integrated a nonmonotonic error propagation analysis with an adjustable graph propagation visualization to help domain experts examine the details of error propagation and answer such questions as why an error is mitigated or amplified by program execution.

97 MATHEMATICS AND COMPUTING↗

Correlated charge noise and relaxation errors in superconducting qubits

In This report, the central challenge in building a quantum computer is error correction. Unlike classical bits, which are susceptible to only one type of error, quantum bits (“qubits”) are susceptible to two types of error, corresponding to flips of the qubit state about the X- and Z-directions. While the Heisenberg Uncertainty Principle precludes simultaneous monitoring of X- and Z-flips on a single qubit, it is possible to encode quantum information in large arrays of entangled qubits that enable accurate monitoring of all errors in the system, provided the error rate is low. Another crucial requirement is that errors cannot be correlated. Here, we characterize a superconducting multiqubit circuit and find that charge fluctuations are highly correlated on a length scale over 600 µm; moreover, discrete charge jumps are accompanied by a strong transient suppression of qubit energy relaxation time across the millimeter-scale chip. The resulting correlated errors are explained in terms of the charging event and phonon-mediated quasiparticle poisoning associated with absorption of gamma rays and cosmic-ray muons in the qubit substrate. Robust quantum error correction will require the development of mitigation strategies to protect multiqubit arrays from correlated errors due to particle impacts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Long-haul high rate quantum key distribution

Multiple bit values can be encoded on a single photon in a quantum key distribution (QKD) system using a plurality of sidebands of an optical carrier frequency. Computational and conjugate bases can be defined, and photons decoded based on a selected state from either basis. If n sidebands are available, as many as log2 n bits can be encoded on a single photon. Errors in detected bit values due to selection of an incorrect basis state or other errors can be at least partially corrected by bit distillation to identity bit strings for which a transmitter and a receiver record the same values, without insecure transmission of these values.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Long-haul high rate quantum key distribution

Multiple bit values can be encoded on a single photon in a quantum key distribution (QKD) system using a plurality of sidebands of an optical carrier frequency. Computational and conjugate bases can be defined, and photons decoded based on a selected state from either basis. If n sidebands are available, as many as log2n bits can be encoded on a single photon. Errors in detected bit values due to selection of an incorrect basis state or other errors can be at least partially corrected by bit distillation to identity bit strings for which a transmitter and a receiver record the same values, without insecure transmission of these values.

Nordholt, Jane Elizabeth↗