Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “aspect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Geometric aspects in digital analysis of Multi-Spectral Scanner (MSS) data

Present automated systems of interpretation which apply pattern recognition techniques on MSS data do not fully consider the geometry of the acquisition system. In an effort to improve the usefulness of the MSS data when digitally treated, geometric aspects are analyzed and discussed. Attempts to correct for scanner instabilities in position and orientation by affine and polynomial transformations, as well as by modified collinearity equations are described. Methods of accounting for panoramic and relief effects are also discussed. It is anticipated that reliable area as well as position determinations can be accomplished during the process of automatic interpretation. A concept for a unified approach to the treatment of remote sensing data, both metric and nonmetric is presented.

Mikhail, E. M.↗
NASA NTRS1972

Economic and environmental aspects of STOL transportation

A system study to analyze the question of the impact of advanced STOL aircraft in meeting the needs of short-haul air transportation systems is discussed. The study is concerned with the following aspects: (1) service to the passenger, (2) economic viability, and (3) economic criteria to include community noise, ground and air decongestion, and air pollution. The STOL aircraft parameters are defined. Preliminary conclusions concerning the feasibility of short-haul air transportation are presented.

Stewart, E. C.↗
NASA NTRS1973

Analysis of high aspect ratio jet flap wings of arbitrary geometry.

Paper presents a design technique for rapidly computing lift, induced drag, and spanwise loading of unswept jet flap wings of arbitrary thickness, chord, twist, blowing, and jet angle, including discontinuities. Linear theory is used, extending Spence's method for elliptically loaded jet flap wings. Curves for uniformly blown rectangular wings are presented for direct performance estimation. Arbitrary planforms require a simple computer program. Method of reducing wing to equivalent stretched, twisted, unblown planform for hand calculation is also given. Results correlate with limited existing data, and show lifting line theory is reasonable down to aspect ratios of 5.

Lissaman, P. B. S.↗
NASA NTRS1972

The kinetic and dynamic aspects of corrosion fatigue in a gaseous hydrogen environment.

The stable, subcritical crack growth stage of fracture under conditions of corrosion fatigue was studied experimentally in order to demonstrate the importance of the kinetic and dynamic aspects of environment-sensitive behavior. The cyclic loading of a titanium alloy in a low-pressure gaseous hydrogen environment is compared to that in a vacuum environment. The influence of the hydrogen environment on the rate of subcritical crack growth is discussed.

Nelson, H. G.↗
NASA NTRS1973

Science aspects of a remotely controlled Mars surface roving vehicle.

Particular attention is given to aspects pertinent to teleoperation, remote control, onboard control, and man-machine relationships in carrying out scientific operations with such a vehicle. It is assumed that landed operations would comprise one Martian year and that the traverse would extend across an area approximately 500 km wide. The mission is assumed to be planned for the early 1980s. Its objective is to obtain data which will aid in answering a number of questions regarding the history of the solar system, the formation of Mars, and the evolution of life on Mars. A series of candidate rover payloads is proposed to meet the requirements. The smallest payload includes a TV camera, a general-purpose manipulator arm, a crusher and siever, an X-ray diffractometer-spectrometer, a gravimeter, a magnetometer, meteorological instruments, and a radio transponder.

Choate, R.↗
NASA NTRS1974

Effect of damper on overall and blade-element performance of a compressor rotor having a tip speed of 1151 feet per second and an aspect ratio of 3.6

The overall and blade-element performance of two configurations of a moderately high aspect ratio transonic compressor rotor are presented. The subject rotor has conventional blade dampers. The performance is compared with a rotor utilizing dual wire friction dampers. At design speed the subject achieved a pressure ratio of 1.52 and efficiency of 0.89 at a near design weight flow of 72.1 pounds per second. The rotor with wire dampers gave consistently higher pressure ratios at each speed, but efficiencies for the two rotors were about the same. Stall margin for the subject rotor was 20.4 percent, but for the wire damped rotor only 4.0 percent.

Lewis, G. W.↗
NASA NTRS1974

Effect of ground proximity on the longitudinal aerodynamic characteristics of an aspect-ratio-1 wing with and without wing-tip blowing

An investigation has been conducted to determine the effect of ground proximity on the aerodynamic characteristics of an aspect-ratio-1 wing with and without wing-tip blowing. This investigation was conducted in the Langley towing tank no. 1 with the model towed over the water to eliminate the effects of walls and of wind-tunnel ground-board boundary layers. The results indicate that the model is stable with height and pitch at positive angles of attack and that the lift-drag ratio is improved at small ground heights with some blowing at the wing tips.

Mineck, R. E.↗
NASA NTRS1974

Investigation of the static lift capability of a low-aspect-ratio wing operating in a powered ground-effect mode

A preliminary experimental investigation has been made to evaluate the powered ground-effect capability of a low-aspect-ratio, wing-body configuration with forward-mounted propulsion. The tests were limited to static ground-effect conditions in order to obtain information on an air-cushion mode of operation. The results indicate, in general, that an air-cushion mode is within the capability of the type of configuration examined. The conditions examined indicated the possibility of hover mode and also forward acceleration capability in near-ground effect. Center-of-pressure movement did not appear to be a problem. However, it was recognized that longitudinal trim would be a problem to consider in both the hover and acceleration modes.

Huffman, J. K.↗
NASA NTRS1974

Microbiological aspects of clean room technology as applied to surgery, with special reference to unidirectional airflow systems

The microbiological aspects of clean room technology as applied to surgery were reviewed. The following pertinent subject areas were examined: (1) clean room technology per se and its utilization for surgery, (2) microbiological monitoring of the clean room surgical environment, (3) clean rooms and their impact on operating room environmental microbiology, and (4) the effect of the technology on surgical wound infection rates. Conclusions were drawn for each topic investigated.

Wardle, M. D.↗
NASA NTRS1974

Operational aspects of Skylab Student Project experiments

The activities associated with the operational aspects ot the Skylab Student Project experiments began with the participation of flight operations personnel on the National Science Teachers Association Selection Board and ended with the performance of the student experiments by the Skylab flightcrews. The operational criteria used during the compatibility analysis to determine which of the 25 national winners could be flown on board the Skylab vehicle are reviewed, the factors involved in the assignment of the experiments to Skylab missions are discussed, the activities associated with training the flightcrews in the operation of the student experiments are described, and the actual performance of the experiments during the mission and the associated ground operations in the Mission Control Center are detailed.

Macleod, J. B.↗
NASA NTRS1974

An overview of high temperature metal fatigue: Aspects covered by the 1973 International Conference on Creep and Fatigue

A summary of papers is presented which covers the following broad aspects of high temperature metal fatigue: (1) materials development and characterization; (2) environmental factors, including air, vacuum, helium, iodine, sodium, and radiation environments; (3) general fatigue life relationships; (4) crack growth laws; (5) design code activities; and (6) design and service experience. Illustrative tables accompany the summary.

Manson, S. S.↗
NASA NTRS1975

Low-speed wind-tunnel investigation of forward-located spoilers and trailing splines as trailing-vortex hazard-alleviation devices on an aspect-ratio-8 wing model

An investigation was made in the Langley V/STOL tunnel in order to determine, by the trailing-wing sensor technique, the effectiveness of either a forward-mounted spoiler or a tip-mounted spline as trailing-vortex attenuation devices on an unswept aspect-ratio-8 wing model. The trailing-wing rolling-moment data taken in the tunnel diffuser section show good agreement with the data taken in the tunnel test section. This agreement indicates that reasonable results may be obtained in the Langley V/STOL tunnel in experimental investigations of the trailing-vortex hazard at relatively great distances behind aircraft models.

Croom, D. R.↗
NASA NTRS1975

Simplified lifting-surface theory for flaps on wings of low and moderate aspect ratios

A modification of the simplified lifting-surface theory for wings with deflected flaps is presented and evaluated. The modification is simple and straightforward in application, and is shown to overcome the deficiency in the theory that results in an underestimation of flap lift effectiveness for wings that have low or moderate aspect ratios.

Wick, B. H.↗
NASA NTRS1975

Strain-gage bridge calibration and flight loads measurements on a low-aspect-ratio thin wing

Strain-gage bridges were used to make in-flight measurements of bending moment, shear, and torque loads on a low-aspect-ratio, thin, swept wing having a full depth honeycomb sandwich type structure. Standard regression analysis techniques were employed in the calibration of the strain bridges. Comparison of the measured loads with theoretical loads are included.

Peele, E. L.↗
NASA NTRS1974

Operational aspects of Skylab

Attention is given to the salient features of Skylab design and the development process in order to illustrate how they influenced the flight operations. Organizational questions are considered, giving attention to the functions of the flight management team, the conduction of the flight operations by the Mission Operations Team, details regarding the engineering support organization, and aspects of science support.

Hanes, T. E.↗
NASA NTRS1974

Computational aspects of maximum likelihood estimation and reduction in sensitivity function calculations

This paper discusses numerical aspects of computing maximum likelihood estimates for linear dynamical systems in state-vector form. Different gradient-based nonlinear programming methods are discussed in a unified framework and their applicability to maximum likelihood estimation is examined. The problems due to singular Hessian or singular information matrix that are common in practice are discussed in detail and methods for their solution are proposed. New results on the calculation of state sensitivity functions via reduced order models are given. Several methods for speeding convergence and reducing computation time are also discussed.

Gupta, N. K.↗
NASA NTRS1975

Effects of wing bend on the aerodynamic characteristics of a low aspect ratio oblique wing

Static longitudinal and lateral/directional force and moment results are presented for an elliptical oblique wing (aspect ratio 6) mounted on top of a body of revolution. The wing was tested at various sweep angles ranging from 0 to 60 deg throughout a Mach-number range of 0.6 to 1.4. Increasing the upward bend along the wing span resulted in no significant improvement in the linearity of the moment curves, but required an impractical wing pivot location to eliminate the rolling moments at low lift. Linear theory gave satisfactory predictions of the lift and moment-curve slopes at low lift.

Hopkins, E. J.↗