Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “absorption coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

DIFFERENCES IN WATER VAPOR RADIATIVE TRANSFER AMONG 1D MODELS CAN SIGNIFICANTLY AFFECT THE INNER EDGE OF THE HABITABLE ZONE

An accurate estimate of the inner edge of the habitable zone is critical for determining which exoplanets are potentially habitable and for designing future telescopes to observe them. Here, we explore differences in estimating the inner edge among seven one-dimensional radiative transfer models: two line-by-line codes (SMART and LBLRTM) as well as five band codes (CAM3, CAM4-Wolf, LMDG, SBDART, and AM2) that are currently being used in global climate models. We compare radiative fluxes and spectra in clear-sky conditions around G and M stars, with fixed moist adiabatic profiles for surface temperatures from 250 to 360 K. We find that divergences among the models arise mainly from large uncertainties in water vapor absorption in the window region (10 μ m) and in the region between 0.2 and 1.5 μ m. Differences in outgoing longwave radiation increase with surface temperature and reach 10–20 W m{sup 2}; differences in shortwave reach up to 60 W m{sup 2}, especially at the surface and in the troposphere, and are larger for an M-dwarf spectrum than a solar spectrum. Differences between the two line-by-line models are significant, although smaller than among the band models. Our results imply that the uncertainty in estimating the insolation threshold of the inner edge (the runaway greenhouse limit) due only to clear-sky radiative transfer is ≈10% of modern Earth’s solar constant (i.e., ≈34 W m{sup 2} in global mean) among band models and ≈3% between the two line-by-line models. These comparisons show that future work is needed that focuses on improving water vapor absorption coefficients in both shortwave and longwave, as well as on increasing the resolution of stellar spectra in broadband models.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1993

Infrared spectroscopic measurements relevant to atmospheric remote sensing

SF6 is a synthetic chemical which is used in many industrial applications and as a meteorological tracer. This paper describes determinations of spectral absorption coefficients k-nu of SF6 measured in the central Q-branches of the nu(3)-fundamental at 947/cm at various temperature-pressure combinations representing tangent heights in solar-occultation experiments or layers in the atmosphere. Spectral data were also obtained for C2H4 and NH3 fundamental bands. Measurements were made with the Doppler-limited spectral resolution of a tunable diode laser spectrometer with a cryogenically cooled absorption cell, described by Varanasi and Chudamani (1992).

Varanasi, Prasad↗
DOE OSTI2018

Radiation Resistance of Nanomodified Organosilicic Enamel

The paper studies the absorption spectrum and the integrated absorption coefficient of organosilicic KO-859 enamel samples modified by silicon dioxide nanoparticles and exposed to solar radiation. It is shown that nanomodification improves the radiation resistance of thermal control coatings and provides stability of their optical properties.

14 SOLAR ENERGY↗
DOE OSTI2014

Electronic and intraband optical properties of single quantum rings under intense laser field radiation

The influence of an intense laser field on one-electron states and intraband optical absorption coefficients is investigated in two-dimensional GaAs/Ga{sub 0.7}Al{sub 0.3}As quantum rings. An analytical expression of the effective lateral confining potential induced by the laser field is obtained. The one-electron energy spectrum and wave functions are found using the effective mass approximation and exact diagonalization technique. We have shown that changes in the incident light polarization lead to blue- or redshifts in the intraband optical absorption spectrum. Moreover, we found that only blueshift is obtained with increasing outer radius of the quantum ring.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS2000

UV-Visible Spectroscopic Method and Models for Assessment and Monitoring of Harmful Algal Blooms

The development of an enhanced predictive and early warning capability for the occurrence and impact of harmful algal blooms (HABs) would be of great benefit to coastal communities. A critical issue for early detection and monitoring of HABs is the need to detect harmful algal species within a mixed-species phytoplankton assemblage. Possession of UV-absorbing compounds called mycosporine-like amino acids (MAAs) may be one factor that allows HAB species to out-compete their phytoplankton neighbors. Possession of MAAs, which we believe can be inferred from strong UV-absorption signals in phytoplankton absorption coefficients, can be used as a flag for potential HAB outbreak. The goal of this project was to develop a solar simulating UV-visible incubator to grow HAB dinoflagellates, to begin MAA analysis of samples collected on global cruises, and to carry out initial experiments on HAB dinoflagellate species in pure culture. Our scientific objectives are to quantify MAA production and spectral induction mechanisms in HAB species, to characterize spectral absorption of MAAs, and to define the ecological benefit of MAAs (i.e. photoprotection). Data collected on cruises to the global oceans will be used to parameterize phytoplankton absorption in the UV region, and this parameterization could be incorporated into existing models of seawater optical properties in the UV spectral region. Data collected in this project were used for graduate fellowship applications by Elizabeth Frame. She has been awarded an EPA STAR fellowship to continue the work initiated by this project.

Mitchell, B. Greg↗
DOE OSTI2014

Electrical and optical properties of fluid iron from compressed to expanded regime

Using quantum molecular dynamics simulations, we show that the electrical and optical properties of fluid iron change dramatically from compressed to expanded regime. Along isochores, the main trend of the electrical resistivity, which is in good agreement with experimental data, is found to be well reproduced by our calculations. Near low densities, where the constant volume derivative of the electrical resistivity on internal energy becomes negative, the transition of iron from the metallic to the non-metallic state takes place. The study of the optical conductivity, absorption coefficient, and Rosseland mean opacity shows that, quantum molecular dynamics combined with the Kubo-Greenwood formula provide powerful tools to explore the electrical and optical properties of fluid iron.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2014

Role of surface states and defects in the ultrafast nonlinear optical properties of CuS quantum dots

We report facile preparation of water dispersible CuS quantum dots (2–4 nm) and nanoparticles (5–11 nm) through a nontoxic, green, one-pot synthesis method. Optical and microstructural studies indicate the presence of surface states and defects (dislocations, stacking faults, and twins) in the quantum dots. The smaller crystallite size and quantum dot formation have significant effects on the high energy excitonic and low energy plasmonic absorption bands. Effective two-photon absorption coefficients measured using 100 fs laser pulses employing open-aperture Z-scan in the plasmonic region of 800 nm reveal that CuS quantum dots are better ultrafast optical limiters compared to CuS nanoparticles.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Exploring the observational constraints on the simulation of brown carbon

Organic aerosols (OA) that strongly absorb solar radiation in the near-UV are referred to as brown carbon (BrC). The sources, evolution, and optical properties of BrC remain highly uncertain and contribute significantly to uncertainty in the estimate of the global direct radiative effect (DRE) of aerosols. Previous modeling studies of BrC optical properties and DRE have been unable to fully evaluate model performance due to the lack of direct measurements of BrC absorption. In this study, we develop a global model simulation (GEOS-Chem) of BrC and test it against BrC absorption measurements from two aircraft campaigns in the continental US (SEAC 4 RS and DC3). To the best of our knowledge, this is the first study to compare simulated BrC absorption with direct aircraft measurements. We show that BrC absorption properties estimated based on previous laboratory measurements agree with the aircraft measurements of freshly emitted BrC absorption but overestimate aged BrC absorption. In addition, applying a photochemical scheme to simulate bleaching/degradation of BrC improves model skill. The airborne observations are therefore consistent with a mass absorption coefficient (MAC) of freshly emitted biomass burning OA of 1.33 m 2 g -1 at 365 nm coupled with a 1-day whitening e-folding time. Using the GEOS-Chem chemical transport model integrated with the RRTMG radiative transfer model, we estimate that the top-of-the-atmosphere all-sky direct radiative effect (DRE) of OA is -0.344 Wm -2 , 10 % higher than that without consideration of BrC absorption. Therefore, our best estimate of the absorption DRE of BrC is +0.048 Wm -2 . We suggest that the DRE of BrC has been overestimated previously due to the lack of observational constraints from direct measurements and omission of the effects of photochemical whitening.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Optical properties of high-pressure fluid hydrogen across molecular dissociation

Optical properties of compressed fluid hydrogen in the region where dissociation and metallization is observed are computed by ab initio methods and compared with recent experimental results. We confirm that at T > 3,000 K, both processes are continuous, while at T < 1,500 K, the first-order phase transition is accompanied by a discontinuity of the dc conductivity and the thermal conductivity, while both the reflectivity and absorption coefficient vary rapidly but continuously. Our results support the recent analysis of National Ignition Facility (NIF) experiments [Celliers PM, et al. (2018) Science 361:677–682], which assigned the inception of metallization to pressures where the reflectivity is ∼0.3. Our results also support the conclusion that the temperature plateau seen in laser-heated diamond-anvil cell (DAC) experiments at temperatures higher than 1,500 K corresponds to the onset of optical absorption, not to the phase transition.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1998

Intergalactic Extinction of High Energy Gamma-Rays

We discuss the determination of the intergalactic pair-production absorption coefficient as derived by Stecker and De Jager by making use of a new empirically based calculation of the spectral energy distribution of the intergalactic infrared radiation field as given by Malkan and Stecker. We show that the results of the Malkan and Stecker calculation agree well with recent data on the infrared background. We then show that Whipple observations of the flaring gamma-ray spectrum of Mrk 421 hint at extragalactic absorption and that the HEGRA observations of the flaring spectrum of Mrk 501 appear to strongly indicate extragalactic absorption. We also discuss the determination of the y-ray opacity at higher redshifts, following the treatment of Salamon and Stecker. We give a predicted spectrum, with absorption included for PKS 2155-304. This XBL lies at a redshift of 0.12, the highest redshift source yet observed at an energy above 0.3 TeV. This source should have its spectrum steepened by approx. 1 in its spectral index between approx. 0.3 and approx. 3 TeV and should show an absorption cutoff above approx. 6 TeV.

Stecker, F. W.↗
DOE OSTI2016

Synthesis and characterization of Mn doped ZnCdS core shell nanostructures QDs using a chemical precipitation route

With advancement in time, researchers has drawn great attention in the synthesis and characterization of mono dispersed alloyed nanocomposites of II-VI compounds. Ternary semiconductor alloyed ZnCdS quantum dots (QD’s) exhibit properties intermediate between those of ZnS and CdS. It shows high absorption coefficients, a composition tunable and size tunable band gap. Moreover, ZnCdS alloyed NC’s display unique composition dependent properties distinct from those of their bulk counterparts. The most striking feature of the alloyed NC’s nanocrystals is their unusual long time stability in emission wavelength. ZnCdS alloyed QD’s at room temperature has been synthesized using chemical precipitation method. Undoped and Mn{sup 2+} doped ZnCdS QDs have been synthesized and studied. UV-visible absorption spectrum shows absorbance in the visible region and photoluminescence (PL) emission spectra of the doped ZnCdS QD’s shows orange emission in comparison to weak blue emission from undoped QDs. The crystallite size is calculated from the XRD patterns. The experimental results indicate that this easy synthesis route would prove a versatile approach for the preparation of doped and undoped ZnCdS QD’s.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Specific features of the optical and photoelectric properties of nanocrystalline indium oxide

The spectral dependences of the absorption coefficient and steady-state photoconductivity and the relaxation of photoconductivity (after illumination switch off) in nanocrystalline indium oxide (In{sub 2}O{sub 3}) films synthesized by the sol–gel method are investigated. The mean nanocrystal size varies from 7–8 to 39–41 nm, depending on the sample-preparation conditions. The optical band gap of nanocrystalline In{sub 2}O{sub 3} is determined as a result of combined analysis of the optical absorption spectra and the spectral dependence of the photoconductivity. The optical band gap in nanocrystalline In{sub 2}O{sub 3} is found to be much narrower than the optical band gap in In{sub 2}O{sub 3} single crystals. The photoconductivity decay kinetics in nanocrystalline In{sub 2}O{sub 3} in air, vacuum, and argon at room temperature are studied. A model explaining the observed photoconductivity decay is proposed.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Z-scan: A simple technique for determination of third-order optical nonlinearity

Z-scan is a simple experimental technique to measure intensity dependent nonlinear susceptibilities of third-order nonlinear optical materials. This technique is used to measure the sign and magnitude of both real and imaginary part of the third order nonlinear susceptibility (χ{sup (3)}) of nonlinear optical materials. In this paper, we investigate third-order nonlinear optical properties of Ag-polymer composite film by using single beam z-scan technique with Q-switched, frequency doubled Nd: YAG laser (λ=532 nm) at 5 ns pulse. The values of nonlinear absorption coefficient (β), nonlinear refractive index (n{sub 2}) and third-order nonlinear optical susceptibility (χ{sup (3)}) of permethylazine were found to be 9.64 × 10{sup −7} cm/W, 8.55 × 10{sup −12} cm{sup 2}/W and 5.48 × 10{sup −10} esu, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Raman thermometry: Effective temperature of the nonuniform temperature field induced by a Gaussian laser

Raman spectroscopy is a widely applied analytical technique with numerous applications that is based on inelastic scattering of monochromatic light, which is typically provided by a laser. Irradiation of a sample by a laser beam is always accompanied by an increase in the sample temperature, which may be unwanted or may be beneficial for studying temperature-related effects and determining thermal parameters. This work reports analyses of the temperature field induced by a Gaussian laser to calculate the Raman scattered intensity related to each temperature value of the nonuniform field present on the sample. The effective temperature of the probed field, calculated as an average weighted by the laser intensity, is demonstrated to be about 70% of the maximum temperature irrespective of the absorption coefficient or the laser focus. Finally, using crystalline silicon as a model material, it is shown that this effective value closely approximates the temperature value identified from the thermally related peak shift.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2015

Rayleigh surface wave interaction with the 2D exciton Bose-Einstein condensate

We describe the interaction of a Rayleigh surface acoustic wave (SAW) traveling on the semiconductor substrate with the excitonic gas in a double quantum well located on the substrate surface. We study the SAW attenuation and its velocity renormalization due to the coupling to excitons. Both the deformation potential and piezoelectric mechanisms of the SAW-exciton interaction are considered. We focus on the frequency and excitonic density dependences of the SAW absorption coefficient and velocity renormalization at temperatures both above and well below the critical temperature of Bose-Einstein condensation of the excitonic gas. We demonstrate that the SAW attenuation and velocity renormalization are strongly different below and above the critical temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Investigation of a Contamination Film Formed by the Electron Beam Irradiation

In the study of materials on electron probe devices in the field of action of the electron beam, a contaminating hydrocarbon film is formed, which affects the experimental results. In this paper, we have studied the influence of a contamination film on carbon-film-coated dielectrics on the intensity of cathodoluminescence and characteristic X-ray lines. The absorption coefficient of the contamination film in the visible and UV ranges has been determined. Filming mechanisms at different parameters of the electron beam have been discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

AIP1OGREN: Aerosol Observing Station Intensive Properties Value-Added Product

The aip1ogren value-added product (VAP) computes several aerosol intensive properties. It requires as input calibrated, corrected, aerosol extensive properties (scattering and absorption coefficients, primarily) from the Aerosol Observing Station (AOS). Aerosol extensive properties depend on both the nature of the aerosol and the amount of the aerosol. We compute several properties as relationships between the various extensive properties. These intensive properties are independent of aerosol amount and instead relate to intrinsic properties of the aerosol itself. Along with the original extensive properties we report aerosol single-scattering albedo, hemispheric backscatter fraction, asymmetry parameter, and Ångström exponent for scattering and absorption with one-minute averaging. An hourly averaged file is produced from the 1-minute files that includes all extensive and intensive properties as well as submicron scattering and submicron absorption fractions. Finally, in both the minutely and hourly files the aerosol radiative forcing efficiency is provided.

54 ENVIRONMENTAL SCIENCES↗