Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Wave guide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Multiscale and multiphysics FEA simulation and materials optimization for laser ultrasound transducers

In this study, the relationship between the nanocomposite design and the laser ultrasound transducer (LUT) characteristics was investigated through simulations in multiple scale levels for material behavior, device response, and acoustic wave propagation in media. First, the effects of the nanoparticle size and concentration on the effective properties of composites were quantitatively investigated with the finite element analysis (FEA) method. Second, the effective properties of the nanocomposite were assigned to the layer, which is modeled as a homogeneous material, in the FEA for the LUT simulating the energy conversion from the incident laser to the acoustic wave. Finally, the ultrasound propagation in the water was calculated by a theoretical wave propagation model. The FEA-based prediction was compared with the experimental data in the literature and a theoretical analysis for LUT based on Thermal-Acoustic coupling. As a result, the ultrasound waves on the transducer surface and at a distance in the water could be predicted. Based on the hierarchically integrated prediction procedure, the optimal conditions of the photoacoustic nanocomposites were investigated through the parametric study with the particle size and concentration as variables. The results guide the material designs optimized for different device characteristics, such as high pressure and broad bandwidth.

36 MATERIALS SCIENCE↗
NASA NTRS1994

High-resolution imaging with a tip-tilt Cassegrain secondary

A prototype adaptive secondary mirror has been developed on a 2.3-m telescope to stabilize rapid motion caused by atmospheric turbulence. The instantaneous position of an image's centroid, or brightest speckle, is measured by a near-infrared camera system which enables the tip-tilt mirror to recenter the image. Correction is accomplished at closed-loop frequencies of less than or = 100 Hz on guide stars with K (2.2 micrometers) magnitudes less than or = 8. Image motion is reduced to less than 0.1 sec rms, removing over 90% of low-frequency (f less than or = 5 Hz) tilt power, leaving less than or = 1 rad exp 2 mean square wave front tilt phase error. In seeing conditions where D/r sub o approximately = 4, long exposures in the H band (1.6 micrometers) exhibit a nearly diffraction-limited resolution of 0.19 sec full width at half maximum (FWHM) (Strehl ratio aprroximately = 0.14)-a factor of 4 improvement over uncorrected images. Reduction of the present static optical errors will improve the Strehl ratio another factor of 2, leading to approximately 70% of the maximum possible Strehl ratio.

Close, L. M.↗
DOE OSTI2026

Ultrabroadband Spacetime Nanoscopy of Terahertz Polaritons in a van der Waals Cavity

Guiding, storing, and processing light at the nanoscale hinges on understanding how polaritons — hybrid quasiparticles of light and matter — propagate and interfere in both space and time. This work introduces a synchrotron-based technique, SYnchrotron SpaceTimE Mapping (SYSTEM), which captures real-time evolution of polariton wave packets with ∼10 nm spatial and sub-100 fs temporal resolution across an ultrabroadband 5–50 THz range. Here, SYSTEM directly visualizes the creation, interference, and decay of multiple high-quality Fabry-Pérot phonon polariton cavity modes in an α-MoO 3 microcavity. These real-space, real-time observations reveal wave-packet dynamics and cavity resonances with record-high quality factors (Q ≈ 100) in the single-digit terahertz regime near 9 THz. SYSTEM thus offers a powerful and broadly applicable platform for probing and engineering ultraslow, deeply subwavelength polaritons, opening new avenues for tailoring light–matter interactions and advancing next-generation THz nanophotonic technologies.

36 MATERIALS SCIENCE↗
NASA NTRS1979

A new technique for measuring solar rotation

A new technique for measuring solar photospheric and subphotospheric rotation rates is described. The technique utilizes the standing-wave nature of the nonradial p-mode oscillations of the whole sun. Specifically, the technique is based upon the observed concentration of p-mode oscillatory power into well defined ridges in two-dimensional wavenumber-frequency power spectra. The frequencies of the ridges in the eastward- and westward-traveling portions of an individual spectrum are systematically shifted in opposite directions by a drift of the standing-wave pattern across the observing field of view. The magnitudes of these frequency shifts are related to the drift velocity and to the horizontal wavenumber in such a way that measurement of the observed frequency shifts in a spectrum yields the drift velocity for that observing run. By guiding on the solar limbs and observing the velocity field at disk center, the observed drift velocity obtained in this way is exactly the rotational velocity of the solar p-mode pattern, and of the solar gas itself.

Rhodes, E. J., Jr.↗
NASA NTRSDate not supplied

Development and Assessment of a New Particle Image Velocimetry System in the NASA GRC 225 cm2 Wind Tunnel

As part of an ongoing campaign to provide detailed and thorough measurements in a two-dimensional impinging shock-wave/boundary-layer interaction (SWBLI), a custom implementation of the Particle Image Velocimetry (PIV) measurement technique in the NASA Glenn 225 cm2 Wind Tunnel was constructed. The flow seeding apparatus was devised to locally seed the region of interest in the overall flowfield to avoid coating the viewing window with seed material. The ability of the PIV system to provide small particles which faithfully track the underlying gas-phase flowfield was of key importance for the success of this system to make quality measurements in the SWBLI flowfield. In order to optimize and assess the performance of the particle seeding system, PIV measurements were made across a planar oblique shock wave and particle response was analyzed to quantify the particle lag effects due to the finite inertia of the seed droplets. Video recordings from a camera placed in the wind tunnel plenum tank were also used to discern the near-field behavior of the seeded plume and guide the design evolution of the seeding apparatus. The resulting optimized seeding configuration was applied to make PIV measurements in the wind tunnel test section boundary layer to assess the seed particle spatial coverage and concentration. This sample boundary layer dataset provides an analog to the eventual boundary layer measurements to be made in the axisymmetric test section under much more challenged viewing conditions.

PIV↗
NASA NTRSDate not supplied

Development and Assessment of a New Particle Image Velocimetry System in the NASA GRC 225 cm2 Wind Tunnel

As part of an ongoing campaign to provide detailed and thorough measurements in a two-dimensional impinging shock-wave/boundary-layer interaction (SWBLI), a custom implementation of the Particle Image Velocimetry (PIV) measurement technique in the NASA Glenn 225 cm2 Wind Tunnel was constructed. The flow seeding apparatus was devised to locally seed the region of interest in the overall flowfield to avoid coating the viewing window with seed material. The ability of the PIV system to provide small particles which faithfully track the underlying gas-phase flowfield was of key importance for the success of this system to make quality measurements in the SWBLI flowfield. In order to optimize and assess the performance of the particle seeding system, PIV measurements were made across a planar oblique shock wave and particle response was analyzed to quantify the particle lag effects due to the finite inertia of the seed droplets. Video recordings from a camera placed in the wind tunnel plenum tank were also used to discern the near-field behavior of the seeded plume and guide the design evolution of the seeding apparatus. The resulting optimized seeding configuration was applied to make PIV measurements in the wind tunnel test section boundary layer to assess the seed particle spatial coverage and concentration. This sample boundary layer dataset provides an analog to the eventual boundary layer measurements to be made in the axisymmetric test section under much more challenged viewing conditions.

PIV↗
DOE OSTI2020

Quasi‐Binary Transition Metal Dichalcogenide Alloys: Thermodynamic Stability Prediction, Scalable Synthesis, and Application

Abstract Transition metal dichalcogenide (TMDCs) alloys could have a wide range of physical and chemical properties, ranging from charge density waves to superconductivity and electrochemical activities. While many exciting behaviors of unary TMDCs have been demonstrated, the vast compositional space of TMDC alloys has remained largely unexplored due to the lack of understanding regarding their stability when accommodating different cations or chalcogens in a single‐phase. Here, a theory‐guided synthesis approach is reported to achieve unexplored quasi‐binary TMDC alloys through computationally predicted stability maps. Equilibrium temperature–composition phase diagrams using first‐principles calculations are generated to identify the stability of 25 quasi‐binary TMDC alloys, including some involving non‐isovalent cations and are verified experimentally through the synthesis of a subset of 12 predicted alloys using a scalable chemical vapor transport method. It is demonstrated that the synthesized alloys can be exfoliated into 2D structures, and some of them exhibit: i) outstanding thermal stability tested up to 1230 K, ii) exceptionally high electrochemical activity for the CO 2 reduction reaction in a kinetically limited regime with near zero overpotential for CO formation, iii) excellent energy efficiency in a high rate Li–air battery, and iv) high break‐down current density for interconnect applications. This framework can be extended to accelerate the discovery of other TMDC alloys for various applications.

Hemmat, Zahra↗
DOE OSTI2021

Enabling Marine Energy Integration for Ocean Observing: Functional Requirements

Marine renewable energy (i.e., wave, tidal or ocean current, thermal gradient, and salinity gradient) or MRE can revolutionize ocean observing capabilities. Five use cases representing a range of ocean observing platforms were developed based on end-user feedback. Drawing from these use cases, common needs or functional requirements were developed to help guide the integration of MRE power delivery for ocean observation structures and functions. The functional requirements were determined from descriptions of the use cases, specifications of hardware that are used or closely associated with existing ocean observation platforms, and direct feedback from ocean observation sensor/platform developers and users. Twenty types of functional requirements were identified, including those associated with power and energy use; physical system requirements; temperature and depth; electrical, acoustic, and motion interference; and reliability. Each set of functional requirements is illustrated as features of the use cases. By defining functional requirements for MRE technology integration in ocean observing platforms, and focusing on end-user requirements, barriers to developing MRE-driven ocean observation missions can be reduced.

50 EE - Wind and Water Power Program - Water (EE-4↗
NASA NTRS1979

Combined pressure and temperature distortion effects on internal flow of a turbofan engine

An additional data base for improving and verifying a computer simulation developed by an engine manufacturer was obtained. The multisegment parallel compressor simulation was designed to predict the effects of steady-state circumferential inlet total-pressure and total-temperature distortions on the flows into and through a turbofan compression system. It also predicts the degree of distortion that will result in surge of the compressor. The effect of combined 180 deg square-wave distortion patterns of total pressure and total temperature in various relative positions is reported. The observed effects of the combined distortion on a unitary bypass ratio turbofan engine are presented in terms of total and static pressure profiles and total temperature profiles at stations ahead of the inlet guide vanes as well as through the fan-compressor system. These observed profiles are compared with those predicted by the complex multisegment model. The effects of relative position of the two components comprising the combined distortion on the degree resulting in surge are discussed. Certain relative positions required less combined distortion than either a temperature or pressure distortion by itself.

Braithwaite, W. M.↗
NASA NTRS1993

Experimental verification of a theoretical model of an active cladding optical fiber fluorosensor

Experiments were conducted to verify a theoretical model on the injection efficiency of sources in the cladding of an optical fiber. The theoretical results predicted an increase in the injection efficiency for higher differences in refractive indices between the core and cladding. The experimental apparatus used consisted of a glass rod 50 cm long, coated at one end with a thin film of fluorescent substance. The fluorescent substance was excited with side illumination, perpendicular to the rod axis, using a 476 nm Argon-ion laser. Part of the excited fluorescence was injected into the core and guided to a detector. The signal was measured for several different cladding refractive indices. The cladding consisted of sugar dissolved in water and the refractive index was changed by varying the sugar concentration in the solution. The results indicate that the power injected into the rod, due to evanescent wave injection, increases with the difference in refractive index which is in qualitative agreement with theory.

Albin, Sacharia↗
DOE OSTI2020

Enabling Marine Energy Integration for Ocean Observing: Functional Requirements

Marine renewable energy (i.e., wave, tidal or ocean current, thermal gradient, and salinity gradient) or MRE can revolutionize ocean observing capabilities. Five use cases representing a range of ocean observing platforms were developed based on end-user feedback. Drawing from these use cases, common needs or functional requirements were developed to help guide the integration of MRE power delivery for ocean observation structures and functions. The functional requirements were determined from descriptions of the use cases, specifications of hardware that are used or closely associated with existing ocean observation platforms, and direct feedback from ocean observation sensor/platform developers and users. Twenty types of functional requirements were identified, including those associated with power and energy use; physical system requirements; temperature and depth; electrical, acoustic, and motion interference; and reliability. Each set of functional requirements is illustrated as features of the use cases. By defining functional requirements for MRE technology integration in ocean observing platforms, and focusing on end-user requirements, barriers to developing MRE-driven ocean observation missions can be reduced.

Cavagnaro, Robert J.↗
DOE OSTI2024

Dynamic control of the spatial frequency content of an intense laser via intra-beam energy transfer

We present theory and simulations demonstrating that bandwidth-inducing optical smoothing techniques such as smoothing by spectral dispersion (SSD) can initiate intra-beam energy transfer (IBET) within a single beam. IBET consists of energy transfer between the different frequency components of the beam and results in a simultaneous and correlated redistribution of the temporal and spatial frequencies of the laser's electric field. We identify a threshold in bandwidth for IBET to occur and validate the theory with simulations. The bandwidth and the color cycling of SSD can result in IBET in conditions relevant for high-energy density experiments at the National Ignition Facility and Omega Laser. We show that IBET could be used to manipulate a laser's spatial frequency content within a plasma. In particular, this technique could be used to increase a laser's effective f-number, with potential applications for self-guiding in plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Tuning gold-based surface functionalization for streptavidin detection: A combined simulative and experimental study

A rationally designed gold-functionalized surface capable of capturing a target protein is presented using the biotin–streptavidin pair as a proof-of-concept. We carried out multiscale simulations to shed light on the binding mechanism of streptavidin on four differently biotinylated surfaces. Brownian Dynamics simulations were used to reveal the preferred initial orientation of streptavidin over the surfaces, whereas classical molecular dynamics was used to refine the binding poses and to investigate the fundamental forces involved in binding, and the binding kinetics. We assessed the binding events and the stability of the streptavidin attachment through a quartz crystal microbalance with dissipation monitoring (QCM-D). The sensing element comprises of biotinylated polyethylene glycol chains grafted on the sensor’s gold surface via thiol-Au chemistry. Finally, we compared the results from experiments and simulations. We found that the confined biotin moieties can specifically capture streptavidin from the liquid phase and provide guidelines on how to exploit the microscopic parameters obtained from simulations to guide the design of further biosensors with enhanced sensitivity.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Coriolis forces modify magnetostatic ponderomotive potentials

It is possible to produce a ponderomotive effect in a plasma system without time-varying fields, if the plasma flows over spatial oscillations in the field. This can be achieved by superimposing a spatially oscillatory perturbation on a guide field, then setting up an electric field perpendicular to the guide field to drive flow over the perturbation. However, subtle distinctions in the structure of the resulting electric field can entirely change the behavior of the resulting ponderomotive force. Previous work has shown that, in slab models, these distinctions can be explained in terms of the polarization of the effective wave that appears in the co-moving frame. Here, we consider what happens to this picture in a cylindrical system, where the transformation to the co-moving (rotating) frame is not inertial. It turns out that the non-inertial nature of this frame transformation can lead to counterintuitive behavior, partly due to the appearance of parallel (magnetic-field-aligned) electric fields in the rotating frame even in cases where none existed in the laboratory frame. Apart from the academic interest of this study, the practical impact lies in being better able to anticipate the antenna configuration on the plasma periphery of a cylindrical plasma that will lead to optimal ponderomotive barrier formation in the interior plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

PRIME

SAND2021-0565 O PRIME is a modeling framework designed for the real-time characterization and forecasting of partially observed epidemics. The method is designed to help guide medical resource allocation in the early epoch of the outbreak. Characterization is the estimation of infection spread parameters using daily counts of symptomatic patients. The estimation problem is posed as one of Bayesian inference and solved using a Markov Chain Monte Carlo technique. The framework can accommodate multiple epidemic waves and can help identify different disease dynamics at the regional, state, and country levels. Examples are provided using publicly available COVID-19 data. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Safta, Cosmin↗
DOE OSTI2024

Tuning Surface Adhesion Using Grayscale Electron-beam Lithography

Surface texturing of manufactured products tailors their properties, such as friction, adhesion, biocompatibility, or fluid interactions. However, advancements in this area are largely the result of trial-and-effort testing and generally lack a science-guided framework for determining the surface topography that will optimize performance. The present investigation explores grayscale electron-beam lithography as a means to create multiscale surface patterns to control surface performance. Here, we created and characterized a set of surface textures on a silicon wafer; the textures were superpositions of sine waves of varying wavelengths and amplitudes. First, the multiscale topography of the patterned surface was characterized, using profilometry and atomic force microscopy, to understand its fidelity to the designed-in pattern. The results of this analysis demonstrated how grayscale lithography accurately controlled the lateral size of features but was less precise on the vertical height of the surface, and also introduced inherent roughness below the scale of patterning. Second, a micromechanical tester was used to characterize the adhesion of the surfaces with large-scale polished silicon spheres. The results showed that adhesion could be tailored, with significant contribution from all of the designed-in length scales of topography. The strength of adhesion did not correlate with conventional roughness parameters but could be accurately modeled using simple numerical integration. Taken together, this investigation demonstrates the promise and challenges of grayscale e-beam lithography with multiscale patterns as a method for the tailoring of surface performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Cryogenic platform to investigate strong microwave cavity-spin coupling in correlated magnetic materials

We present a comprehensive exploration of loop-gap resonators for electron spin resonance (ESR) studies, enabling investigations into the hybridization of solid-state magnetic materials with microwave polariton modes. The experimental setup, implemented in a Physical Property Measurement System by Quantum Design, allows for measurements of ESR spectra at temperatures as low as 2 Kelvin. The versatility of continuous wave ESR spectroscopy is demonstrated through experiments on CuSO 4 •5H 2 O and MgCr 2 O 4 , showcasing the g-tensor and magnetic susceptibilities of these materials. The study delves into the challenges of fitting spectra under strong hybridization conditions and underscores the significance of proper calibration and stabilization. The detailed guide provided serves as a valuable resource for laboratories interested in exploring hybrid quantum systems through microwave resonators.

electron spin resonance spectroscopy↗
DOE OSTI2025

Reducing heat load density with asymmetric and inclined double-crystal monochromators: principles and requirements revisited

Asymmetric double-crystal monochromators (aDCMs) and inclined DCMs (iDCMs) can significantly expand the X-ray beam footprint and consequently reduce the heat load density and gradient. Based on rigorous dynamical theory calculations, the major principles and properties of aDCMs and iDCMs are presented to guide their design and development, particularly for fourth-generation synchrotrons. In addition to the large beam footprint, aDCMs have very large bandwidths (up to ∼10 eV) and angular acceptance, but the narrow angular acceptance of the second crystal requires precise control of the relative orientations and strains. Based on Fourier coupled-wave diffraction theory calculations, it is rigorously proved that the iDCM has almost the same properties as the conventional symmetric DCM, including the efficiency, angular acceptance, bandwidth, tuning energy range and sensitivity to misalignment. The exception is that, for the extremely inclined geometry that can achieve very large footprint expansion, the iDCM has (beneficially) a larger bandwidth and wider angular acceptance. Inclined diffraction has the `rho-kick effect' that can be cancelled by the second reflection of the iDCM (even with misalignment), except that inhomogeneous strains may cause non-uniform rho-kick angles. At present, fabrication/mounting-induced strains pose low risk since they can be controlled to <0.5 µrad over large areas. The only uncertain challenge is the thermally induced strains, yet it is estimated that these strains are naturally lowered by the large footprint and may be further mitigated by optimized cryogenic cooling to the 1–2 µrad level. Overall, aDCMs and iDCMs have more stringent requirements than normal DCMs, but they are feasible schemes in practice.

asymmetric monochromator↗