Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Water Splitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

How Low Can You Go? Nanoscale Membranes for Efficient Water Electrolysis

Motivated by the need to lower the cost of hydrogen (H 2 ) production by water electrolysis, significant research efforts are focused on making proton (H + ) exchange membrane (PEM) water electrolyzers more efficient and capable of operating at higher current densities. These aims can be met by making H + -conducting membranes thinner, which has the effect of lowering ohmic drops across the membrane that represent the largest efficiency loss at high current densities (>2 A cm –2 ). However, decreasing membrane thickness below 50 μm is not trivial due to trade-offs between membrane resistance, H 2 crossover (safety), membrane degradation, and manufacturing throughput. Furthermore, descriptions of key processes, limitations, and trade-offs that arise in thin membranes are provided that can be used to guide the design of ultrathin (i.e., submicron thick), low-resistance membrane materials that have the potential to transform the field of clean H 2 production.

08 HYDROGEN↗
DOE OSTI2025

Red Light-Powered Nanowire Photochemical Diodes for Unassisted Hydrogen Evolution and Glycerol Valorization

Artificial photosynthesis via unassisted photochemical diodes is a promising approach for generating solar fuels. However, photoelectrochemical systems often degrade under solar diurnal cycling, and reliance on solar insolation exacerbates land use. Narrow-band LED illumination offers continuous and constant operation, enabling the vertical integration of stable photochemical diodes. In this study, 740 nm red light was investigated as the illumination source for silicon-based photochemical diodes integrating the hydrogen evolution reaction with the glycerol oxidation reaction (GOR), where replacing the oxygen evolution reaction with GOR increases attainable bias-free photocurrents. Increasing photovoltages, saturation current densities, and power conversion efficiencies were observed with increasing incident red light intensity. Under a red light intensity of 60 mW cm –2 , these systems are stable above 7.5 mA cm –2 for 6 days with periodic electrolyte refreshing. In conclusion, these results offer a promising prospect for red light-powered photochemical diodes that integrate other significant reduction reactions, such as CO 2 reduction.

Alcohols↗
DOE OSTI2026

Front-Surface Potential of Platinized p -InP Photocathodes Probed by Dual-Working-Electrode Measurements

The front-surface potential (E fr ) of p-InP/Pt photocathodes performing the hydrogen-evolution reaction has been probed under operating conditions using a dual-workingelectrode (DWE) method. The DWE data are consistent with expectations for proposed stability mechanisms for p-InP photocathodes. Specifically, E fr for Pt-modified p-InP adopts a value near the reversible hydrogen electrode (RHE) potential, consistent with kinetic suppression of metallic In 0 formation. The data provide a rapid, operando metric of interfacial catalyst activity, and indicate that E fr for the p-InP/Pt junction is governed by surface catalytic kinetics rather than by the applied back-contact potential (E b ).

Catalysts↗
DOE OSTI2026

Advances in Colloidal InP-Based Quantum Dots for Photocatalytic Hydrogen Evolution

Photocatalytic materials for hydrogen generation are typically categorized into UV-absorbing metal oxides and visible-range semiconductors such as chalcogenides or perovskites, which often incorporate toxic elements. To address environmental concerns of the latter group, indium phosphide (InP)-based quantum dots (QDs) have recently emerged as a less toxic alternative. These nanocrystals (NCs) benefit from a broadband and tunable absorption spectrum, which is well matched for solar photochemistry, and offer suitable electronic characteristics to drive photoinduced charge separation. This perspective provides a comprehensive summary of the recent advancements in developing InP-based NCs with a focus on photocatalytic hydrogen production. We discuss synthetic strategies that enhance the catalytic activity of these materials and highlight key challenges that must be addressed to enhance their performance. Finally, we explore future research directions aimed at improving photocatalytic efficiency and integrating InP-based QDs into practical solar-to-fuel conversion systems.

Hydrogen↗
DOE OSTI2020

Evaluation of a V 8 C 7 Anode for Oxygen Evolution in Alkaline Media: Unusual Morphological Behavior

Metallic vanadium carbide (V 8 C 7 ) with cubic symmetry is examined as an oxygen evolution reaction (OER) precatalyst in alkaline media. Herein, we used quasi in situ scanning electron microscopy and energy-dispersive X-ray spectrometry to investigate the structural transformation of the precatalyst V 8 C 7 microparticles during extended cyclic voltammetric (CV) OER testing. Interestingly, an anisotropic morphological transformation (from a distorted sphere to a cuboid) of V 8 C 7 was observed. Our theoretical and experimental results strongly suggest that this morphological change happens due to the selective self-oxidation and dissolution of the V 8 C 7 (110) and (111) surfaces and the subsequent exposure of the relatively stable (100), (010), and (001) surfaces. Lastly, these results also suggest that these stable facets are preferable for the OER, and a current density of 10 mA·cm –2 was delivered at an overpotential of 503 mV after the extended CV OER testing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Structural evidence for intermediates during O 2 formation in photosystem II

In natural photosynthesis, the light-driven splitting of water into electrons, protons and molecular oxygen forms the first step of the solar-to-chemical energy conversion process. The reaction takes place in photosystem II, where the Mn 4 CaO 5 cluster first stores four oxidizing equivalents, the S 0 to S 4 intermediate states in the Kok cycle, sequentially generated by photochemical charge separations in the reaction center and then catalyzes the O–O bond formation chemistry. Here, we report room temperature snapshots by serial femtosecond X-ray crystallography to provide structural insights into the final reaction step of Kok’s photosynthetic water oxidation cycle, the S 3 →[S 4 ]→S 0 transition where O 2 is formed and Kok’s water oxidation clock is reset. Our data reveal a complex sequence of events, which occur over micro- to milliseconds, comprising changes at the Mn 4 CaO 5 cluster, its ligands and water pathways as well as controlled proton release through the hydrogen-bonding network of the Cl1 channel. Importantly, the extra O atom O x , which was introduced as a bridging ligand between Ca and Mn1 during the S 2 →S 3 transition disappears or relocates in parallel with Y z reduction starting at approximately 700 μs after the third flash. The onset of O 2 evolution, as indicated by the shortening of the Mn1–Mn4 distance, occurs at around 1,200 μs, signifying the presence of a reduced intermediate, possibly a bound peroxide.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Tungsten oxide-coated copper gallium selenide sustains long-term solar hydrogen evolution

This work demonstrates that ultrathin (4 nm) tungsten oxide (WO 3 ) coatings on copper gallium selenide (CuGa 3 Se 5 ) photocathodes have the potential for long-term solar hydrogen evolution. We describe how with a combination of a robust 1.84 eV CuGa 3 Se 5 absorber layer, a WO 3 protective coating, and a Pt catalyst, we obtain a new durability milestone for any non-silicon photoelectrochemical hydrogen-producing device by passing 21,490 C cm -2 of charge across six weeks of continuously-illuminated chronoamperometric testing under applied bias.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Structural and photoelectrochemical properties in the thin film system Cu–Fe–V–O and its ternary subsystems Fe–V–O and Cu–V–O

Thin-film material libraries in the ternary and quaternary metal oxide systems Fe–V–O, Cu–V–O, and Cu–Fe–V–O were synthesized using combinatorial reactive co-sputtering with subsequent annealing in air. Their compositional, structural, and functional properties were assessed using high-throughput characterization methods. Prior to the investigation of the quaternary system Cu–Fe–V–O, the compositions (Fe 61 V 39 )O x and (Cu 52 V 48 )O x with promising photoactivity were identified from their ternary subsystems Fe–V–O and Cu–V–O, respectively. Two Cu–Fe–V–O material libraries with (Cu 29-72 Fe 4-27 V 22-57 )O x and (Cu 11-55 Fe 27-73 V 12-34 )O x composition spread were investigated. Seven mixed ternary and quaternary phase regions were identified: I (α-Cu 3 FeV 6 O 26 /FeVO 4 ), II (Cu 5 V 2 O 10 /FeVO 4 /α-Cu 3 Fe 4 V 6 O 26 ), III (Cu 5 V 2 O 10 ), IV (Cu 5 V 2 O 10 /FeVO 4 , V (FeVO 4 /γ-Cu 2 V 2 O 7 /α-Cu 3 Fe 4 V 6 O 26 ), VI (β-Cu 2 V 2 O 7 /α-Cu 3 Fe 4 V 6 O 26 /FeVO 4 ), and VII (β-Cu 3 Fe 4 V 6 O 26 /FeVO 4 ). Furthermore, in the investigated composition range, two photoactive regions, (Cu 53 Fe 7 V 40 )O x and (Cu 45 Fe 21 V 34 )O x , were identified, exhibiting 103 μ A/cm 2 and 108 μ A/cm 2 photocurrent density for the oxygen evolution reaction at 1.63 V vs reversible hydrogen electrode, respectively. The highest photoactive region (Cu 45 Fe 21 V 34 )O x comprises the dominant α-Cu 3 Fe 4 V 6 O 24 phase and minor FeVO 4 phase. This photoactive region corresponds to having an indirect bandgap of 1.87 eV and a direct bandgap of 2.58 eV with an incident photon-to-current efficiency of 30% at a wavelength of 310 nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Design and characterization of surface molecular assemblies for the preparation of solar fuels

A key issue in solar energy conversion is the utilization of solar energy for the preparation of solar fuels. In this area, artificial photosynthesis offers promising approaches for the conversion of H 2 O and CO 2 into usable solar fuels. This review highlights both the design and characterization of surface molecular assemblies for the preparation of solar fuels. It includes mechanistic summaries of the details of the underlying surface chemical reactions including water oxidation and proton/water reduction. The surface mechanisms are shown to integrate molecular reactivity with surface electron transfer in integrated assemblies that lead to impressive efficiencies for water oxidation and proton or CO 2 reduction.

catalysts and catalysis↗
DOE OSTI2024

Interface-modulated kinetic differentials in electron and hole transfer rates as a key design principle for redox photocatalysis by Sb2VO5/QD heterostructures

The efficient conversion of solar energy to chemical energy represents a critical bottleneck to the energy transition. Photocatalytic splitting of water to generate solar fuels is a promising solution. Semiconductor quantum dots (QDs) are prime candidates for light-harvesting components of photocatalytic heterostructures, given their size-dependent photophysical properties and band-edge energies. A promising series of heterostructured photocatalysts interface QDs with transition-metal oxides which embed midgap electronic states derived from the stereochemically active electron lone pairs of p-block cations. Here, we examine the thermodynamic driving forces and dynamics of charge separation in Sb2VO5/CdSe QD heterostructures, wherein a high density of Sb 5s2-derived midgap states are prospective acceptors for photogenerated holes. Hard-x-ray valence band photoemission spectroscopy measurements of Sb2VO5/CdSe QD heterostructures were used to deduce thermodynamic driving forces for charge separation. Interfacial charge transfer dynamics in the heterostructures were examined as a function of the mode of interfacial connectivity, contrasting heterostructures with direct interfaces assembled by successive ion layer adsorption and reaction (SILAR) and interfaces comprising molecular bridges assembled by linker-assisted assembly (LAA). Transient absorption spectroscopy measurements indicate ultrafast (<2 ps) electron and hole transfer in SILAR-derived heterostructures, whereas LAA-derived heterostructures show orders of magnitude differentials in the kinetics of hole (<100 ps) and electron (∼1 ns) transfer. The interface-modulated kinetic differentials in electron and hole transfer rates underpin the more effective charge separation, reduced charge recombination, and greater photocatalytic efficiency observed for the LAA-derived Sb2VO5/CdSe QD heterostructures.

Chemistry↗
DOE OSTI2025

Robust and tunable oxide nanoscrolls for solar-driven H 2 generation and storage

Hydrogen gas is a promising alternative to fossil fuels due to its high energy output and environmentally safe byproducts. Various morphologies of photocatalytic materials have been explored for high-efficiency H 2 production, for instance, quasi-1D nanoscroll structures that provide a larger surface-to-volume ratio. Recently, we predicted layer-by-layer formation of stable oxide nanoscrolls directly from dichalcogenide precursors, eliminating the need for costly formation of two-dimensional oxides for a roll-up synthesis of nanoscrolls. Here, in this study, we evaluate the suitability of those oxide nanoscroll materials—MoO 3 , WO 3 , PdO 2 , HfO 2 , and GeO 2 —for solar-driven photocatalytic H 2 production and storage. Using excited state theory coupled with Bethe–Salpeter equation simulations, we discern their electronic and optical properties as a function of interlayer scroll spacing and find them to be highly conducive for solar-driven photocatalysis. Additionally, using ab initio molecular dynamics simulations, we show that they are also suitable for H 2 storage as the nanoscrolls exhibit an effective trapping of hydrogen, even in the presence of defects and vacancies in the oxides. This work thus demonstrates the discovery of robust and tunable oxide nanoscrolls as materials for advancing solar-driven hydrogen technologies.

Chemical compounds↗
DOE OSTI2020

Template-stabilized oxidic nickel oxygen evolution catalysts

Earth-abundant oxygen evolution catalysts (OECs) with extended stability in acid can be constructed by embedding active sites within an acid-stable metal-oxide framework. In this paper, we report stable NiPbO x films that are able to perform oxygen evolution reaction (OER) catalysis for extended periods of operation (>20 h) in acidic solutions of pH 2.5; conversely, native NiO x catalyst films dissolve immediately. In situ X-ray absorption spectroscopy and ex situ X-ray photoelectron spectroscopy reveal that PbO 2 is unperturbed after addition of Ni and/or Fe into the lattice, which serves as an acid-stable, conductive framework for embedded OER active centers. The ability to perform OER in acid allows the mechanism of Fe doping on Ni catalysts to be further probed. Catalyst activity with Fe doping of oxidic Ni OEC under acid conditions, as compared to neutral or basic conditions, supports the contention that role of Fe 3+ in enhancing catalytic activity in Ni oxide catalysts arises from its Lewis acid properties.

25 ENERGY STORAGE↗
DOE OSTI2021

Probing adsorbates on La1-xSrxNiO3-d surfaces under humid conditions: implications for the oxygen evolution reaction

Earth-abundant nickel-containing perovskite oxides (ANiO3) are highly active materials for the oxygen evolution reaction (OER). The strong nickel-oxygen (Ni-O) covalency, tunable by A-site chemical substitution, contributes to both bulk and surface material properties like the formation of oxygen vacancies (????••) and OER activity. Here we quantify the coverage of OER relevant adsorbates on a series of La1-xSrxNiO3-d (LSNO, 0 = x = 0.5) epitaxial thin films exposed to humid environments by ambient pressure X-ray photoelectron spectroscopy (AP-XPS). While all LSNO film compositions investigated here have comparable hydroxide coverages at the relative humidities (RHs) probed (1.5 x 10-5 – 0.2 %RH), the amount of under-coordinated surface oxygen increases notably with Sr content. We interpret differences in the free energy of adsorption (?Gads,i) of these OER intermediates, inferred from adsorption isotherms, in the context of proposed ????••-mediated OER mechanisms, consistent with the pH-dependent OER activity observed here for LSNO. We find that Sr incorporation enhances the affinity of LSNO surfaces for these under-coordinated oxygen species, in line with calculations in the literature.

Rare-earth nickelates, ambient pressure-X-ray phot↗
DOE OSTI2022

The 2022 solar fuels roadmap

Abstract Renewable fuel generation is essential for a low carbon footprint economy. Thus, over the last five decades, a significant effort has been dedicated towards increasing the performance of solar fuels generating devices. Specifically, the solar to hydrogen efficiency of photoelectrochemical cells has progressed steadily towards its fundamental limit, and the faradaic efficiency towards valuable products in CO 2 reduction systems has increased dramatically. However, there are still numerous scientific and engineering challenges that must be overcame in order to turn solar fuels into a viable technology. At the electrode and device level, the conversion efficiency, stability and products selectivity must be increased significantly. Meanwhile, these performance metrics must be maintained when scaling up devices and systems while maintaining an acceptable cost and carbon footprint. This roadmap surveys different aspects of this endeavor: system benchmarking, device scaling, various approaches for photoelectrodes design, materials discovery, and catalysis. Each of the sections in the roadmap focuses on a single topic, discussing the state of the art, the key challenges and advancements required to meet them. The roadmap can be used as a guide for researchers and funding agencies highlighting the most pressing needs of the field.

08 HYDROGEN↗
DOE OSTI2023

Going around the Kok cycle of the water oxidation reaction with femtosecond X-ray crystallography

The water oxidation reaction in photosystem II (PS II) produces most of the molecular oxygen in the atmosphere, which sustains life on Earth, and in this process releases four electrons and four protons that drive the downstream process of CO 2 fixation in the photosynthetic apparatus. The catalytic center of PS II is an oxygen-bridged Mn 4 Ca complex (Mn 4 CaO 5 ) which is progressively oxidized upon the absorption of light by the chlorophyll of the PS II reaction center, and the accumulation of four oxidative equivalents in the catalytic center results in the oxidation of two waters to dioxygen in the last step. The recent emergence of X-ray free-electron lasers (XFELs) with intense femtosecond X-ray pulses has opened up opportunities to visualize this reaction in PS II as it proceeds through the catalytic cycle. In this review, we summarize our recent studies of the catalytic reaction in PS II by following the structural changes along the reaction pathway via room-temperature X-ray crystallography using XFELs. The evolution of the electron density changes at the Mn complex reveals notable structural changes, including the insertion of O X from a new water molecule, which disappears on completion of the reaction, implicating it in the O—O bond formation reaction. We were also able to follow the structural dynamics of the protein coordinating with the catalytic complex and of channels within the protein that are important for substrate and product transport, revealing well orchestrated conformational changes in response to the electronic changes at the Mn 4 Ca cluster.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

La- and Mn-doped cobalt spinel oxygen evolution catalyst for proton exchange membrane electrolysis

Discovery of earth-abundant electrocatalysts to replace iridium for the oxygen evolution reaction (OER) in a proton exchange membrane water electrolyzer (PEMWE) represents a critical step in reducing the cost for green hydrogen production. Here we report a nanofibrous cobalt spinel catalyst codoped with lanthanum (La) and manganese (Mn) prepared from a zeolitic imidazolate framework embedded in electrospun polymer fiber. The catalyst demonstrated a low overpotential of 353 millivolts at 10 milliamperes per square centimeter and a low degradation for OER over 360 hours in acidic electrolyte. A PEMWE containing this catalyst at the anode demonstrated a current density of 2000 milliamperes per square centimeter at 2.47 volts (Nafion 115 membrane) or 4000 milliamperes per square centimeter at 3.00 volts (Nafion 212 membrane) and low degradation in an accelerated stress test.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Hydrogen: Targeting $1/kg in 1 Decade

The societal energy system is evolving rapidly as the impacts of our existing energy system are better appreciated and technological advances have dramatically decreased the cost of renewable resources. Simultaneously, the importance of energy transfer across timeframes and the difficulty of decarbonizing the industrial loads and transportation demands using electricity are being recognized. At the center of this need is achieving low-cost clean hydrogen. The U.S. Department of Energy launched the Hydrogen Energy EarthShot which seeks to reduce the cost of clean hydrogen to $1 per 1 kilogram in one decade. Reaching the $1/kg goal is dependent on the evolution of the electrical energy system to increase renewable energy deployment and low electricity costs; advances in electrolysis technology and manufacturing readiness; and infrastructure build-out and hydrogen market establishment that results in the ability to make, move, store, and use clean hydrogen economically while spurring job creation.

08 HYDROGEN↗