Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WAVEGUIDE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Fabrication and structural properties of AlN submicron periodic lateral polar structures and waveguides for UV-C applications

Periodically poled AlN thin films with submicron domain widths were fabricated for nonlinear applications in the UV-VIS region. A procedure utilizing metalorganic chemical vapor deposition growth of AlN in combination with laser interference lithography was developed for making a nanoscale lateral polarity structure (LPS) with domain size down to 600 nm. The Al-polar and N-polar domains were identified by wet etching the periodic LPS in a potassium hydroxide solution and subsequent scanning electron microscopy (SEM) characterization. Fully coalesced and well-defined vertical interfaces between the adjacent domains were established by cross-sectional SEM. AlN LPSs were mechanically polished and surface roughness with a root mean square value of ∼10 nm over a 90 μm × 90 μm area was achieved. 3.8 μm wide and 650 nm thick AlN LPS waveguides were fabricated. The achieved domain sizes, surface roughness, and waveguides are suitable for second harmonic generation in the UVC spectrum.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Feasibility of graphene CRLH metamaterial waveguides and leaky wave antennas

The feasibility of composite right/left-handed (CRLH) metamaterial waveguides based upon graphene plasmons is demonstrated via numerical simulation. Designs are presented that operate in the terahertz frequency range along with their various dimensions. Dispersion relations, radiative and free-carrier losses, and free-carrier based tunability are characterized. Finally, the radiative characteristics are evaluated, along with its feasibility for use as a leaky-wave antenna. While CRLH waveguides are feasible in the terahertz range, their ultimate utility will require precise nanofabrication, and excellent quality graphene to mitigate free-carrier losses.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical studies of nonlinear ultrasonic guided waves in uniform waveguides with arbitrary cross sections

Nonlinear guided waves have been investigated widely in simple geometries, such as plates, pipe and shells, where analytical solutions have been developed. This paper extends the application of nonlinear guided waves to waveguides with arbitrary cross sections. The criteria for the existence of nonlinear guided waves were summarized based on the finite deformation theory and nonlinear material properties. Numerical models were developed for the analysis of nonlinear guided waves in complex geometries, including nonlinear Semi-Analytical Finite Element (SAFE) method to identify internal resonant modes in complex waveguides, and Finite Element (FE) models to simulate the nonlinear wave propagation at resonant frequencies. Two examples, an aluminum plate and a steel rectangular bar, were studied using the proposed numerical model, demonstrating the existence of nonlinear guided waves in such structures and the energy transfer from primary to secondary modes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Passive wavelength tuning and multichannel photonic coupling using monolithically integrated vertical microresonators on ridge waveguides

The passive tuning of the resonant coupling wavelength in a SiN x vertical microring coupler (VμRC) monolithically integrated on a ridge waveguide by engineering the structural parameters of the VμRCs is experimentally demonstrated and theoretically verified. Multi-channel photonic coupling is achieved by integrating two different VμRCs on a single ridge waveguide. This work represents here a critical step to 3D photonic integration using VμRCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Laser-heated capillary discharge plasma waveguides for electron acceleration to 8 GeV

A plasma channel created by the combination of a capillary discharge and inverse Bremsstrahlung laser heating enabled the generation of electron bunches with energy up to 7.8 GeV in a laser-driven plasma accelerator. The capillary discharge created an initial plasma channel and was used to tune the plasma temperature, which optimized laser heating. Although optimized colder initial plasma temperatures reduced the ionization degree, subsequent ionization from the heater pulse created a fully ionized plasma on-axis. The heater pulse duration was chosen to be longer than the hydrodynamic timescale of ≈ 1 ns, such that later temporal slices were more efficiently guided by the channel created by the front of the pulse. Here, simulations are presented which show that this thermal self-guiding of the heater pulse enabled channel formation over 20 cm. The post-heated channel had lower on-axis density and increased focusing strength compared to relying on the discharge alone, which allowed for guiding of relativistically intense laser pulses with a peak power of 0.85 PW and wakefield acceleration over 15 diffraction lengths. Electrons were injected into the wake in multiple buckets and times, leading to several electron bunches with different peak energies. To create single electron bunches with low energy spread, experiments using localized ionization injection inside a capillary discharge waveguide were performed. A single injected bunch with energy 1.6 GeV, charge 38 pC, divergence 1 mrad, and relative energy spread below 2% full-width half-maximum was produced in a 3.3 cm-long capillary discharge waveguide. This development shows promise for mitigation of energy spread and future high efficiency staged acceleration experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mode selection in two-dimensional Bragg resonators based on planar dielectric waveguides

Two-dimensional Bragg resonators based on planar dielectric waveguides are analysed. It is shown that the doubly periodic corrugation deposited on the dielectric surface in the form of two gratings with translational vectors directed perpendicular to each other ensures effective selection of modes along two coordinates at large Fresnel parameters. This result is obtained both by the method of coupled waves (geometrical optics approximation) and by the direct numerical simulations. Two-dimensional Bragg resonators make it possible to fabricate two-dimensional distributed feedback lasers and to provide generation of spatially coherent radiation in large-volume active media. (waveguides)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bandgap modes in a coupled waveguide array

This work examines a waveguide array that consists of ten Nb{sub 2}O{sub 5}/SiO{sub 2} double layers and supports a 0.63-{mu}m surface wave. The deposition of a Nb{sub 2}O{sub 5} capping layer on top of the waveguide array enables a marked increase in the wave field intensity on its surface. The efficiency of surface-wave excitation in the Kretschmann configuration can be optimised by adjusting the number of double layers. We analyse the behaviour of the Bragg mode in relation to the thickness of the layer exposed to air and the transition of this mode from the second allowed band to the first through the bandgap of the system. In addition, the conventional leaky mode converts to a surface mode and then to a guided mode. (fiber and integrated optics)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Selection of the higher transverse modes of a waveguide quasi-optical resonator

A method of spatial filtration for the selective excitation of individual higher-order transverse oscillation modes with a high degree of discrimination of undesirable modes in a waveguide quasi-optical resonator is described. The method is based on the use of a mirror with absorbing or scattering inhomogeneities discretely arranged on its surface. The efficient excitation of such modes in a waveguide dielectric resonator with a nonuniform amplitude-step mirror in the submillimetre wavelength range (at 0.4326 mm) is confirmed theoretically and experimentally. (resonators)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On control of kinematic parameters of ultracold neutrons in waveguides

The possibility of controlling the kinematic parameters of ultracold neutrons (UCNs) is analysed by the example of a waveguide transfer and transformation of 2D images in ultracold neutrons and by the example of an increase in the concentration and deceleration/acceleration of ultracold neutrons during their transport in the waveguide with a variable cross section. The critical parameters of the problem are estimated, which indicates both consistency of the proposed approach and the emerging experimental limitations. (laser applications and other topics in quantum electronics)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effects of surface roughness and absorption on light propagation in graded-profile waveguides

This paper examines the effects of surface roughness and absorption on laser light propagation in graded-profile waveguiding structures. We derive analytical expressions for the scattering and absorption coefficients of guided waves and analyse these coefficients in relation to parameters of the waveguiding structure and the roughness of its boundary. A new approach is proposed to measuring roughness parameters of precision dielectric surfaces. Experimental evidence is presented which supports the main conclusions of the theory. (integraled-optical waweguides)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Transmission characteristics of circular metallic waveguides for terahertz radiation

Transmission characteristics of oversized circular metallic waveguides excited by linearly polarised Gaussian laser beams in the terahertz range (4 - 28 THz) are studied theoretically and experimentally. Calculating the transmission characteristics, we have determined the conditions of applicability of the method of the eigenoscillations in the approximations of a real metal by an ideal metal or dielectric, depending on the transmitted radiation frequency. The existence of the transition region is established in the behaviour of the electrodynamic properties of metallic waveguides in the frequency range of 7.5 - 15 THz.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical formation of stable waveguiding structures from a photopolymerisable composition with a nonpolymerisable component

We report formation of stable dielectric waveguiding structures from a photopolymerisable composition containing a nonpolymerisable component by optical radiation. A computer simulation has shown that the use of nonpolymerisable additives not only retains the self-trapping modes of incident radiation but also provides matching conditions for the synthesised waveguiding structure with standard optical fibres at telecommunication wavelengths. The efficiency of these nonlinear wave processes for connecting single-mode fibres SMF-28 is experimentally confirmed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-power 850-870-nm pulsed lasers based on heterostructures with narrow and wide waveguides

The power and spectral characteristics of pulsed laser diode arrays operating in the spectral range of 850-870 nm and based on heterostructures of two different types (with narrow and wide waveguides) are studied. It is found that the power-current characteristics of the laser arrays of both types are linear within the pump current range of 10-50 A and that the steepness of these characteristics decreases at currents exceeding 80 A. The decrease in the slope efficiency is more noticeable for laser arrays based on heterostructures with wide waveguides. (semiconductor lasers. physics and technology)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Planar fluoride waveguides for amplifiers and lasers

We have produced planar optical waveguides having a crystalline CaF{sub 2} – YF{sub 3} – NdF{sub 3} mixed yttrofluorite core and two reflective claddings in order to improve waveguide excitation efficiency. Under diode pumping, lasing has been achieved at a wavelength of 1064 nm with a slope efficiency near 15%. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Analysis of the effects of mismatched errors on coherent beam combining based on a self-imaging waveguide

A theoretical model of coherent beam combining (CBC) based on a self-imaging waveguide (SIW) is built and the effects of mismatched errors on SIW-based CBC are simulated and analysed numerically. With the combination of the theoretical model and the finite difference beam propagation method, two main categories of errors, assembly and nonassembly errors, are numerically studied to investigate their effect on the beam quality by using the M{sup 2} factor. The optimisation of the SIW and error control principle of the system is briefly discussed. The generalised methodology offers a good reference for investigating waveguide-based high-power coherent combining of fibre lasers in a comprehensive way. (lasers and laser beams)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of asymmetric injection of laser radiation into capillary waveguides on wake acceleration of electrons possessing various injection energies

Laser wakefield acceleration of electron bunches possessing various initial injection energies in capillary waveguides is studied in the conditions of an asymmetric input of laser radiation into a waveguide (the propagation direction of laser radiation deviates from the capillary axis or the laser spot is not symmetric). The factors determining the critical angle of the laser radiation input into the capillary, within which the wake acceleration of electrons is close to optimal, have been found. It is shown that in acceleration stages where electron energies are high, the requirements to angular concentricity of the capillary axis and laser radiation focusing are substantially weaker due to the relativistic 'weighting' of the electron mass. (extreme laser radiation: physics and fundamental applications)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Semiconductor AlGaInAs/InP lasers with ultra-narrow waveguides

Laser diodes based on AlGaInAs/InP heterostructures with an ultra-narrow waveguide are developed. It is shown that the use of this waveguide in conjunction with profiled doping ensures a balance between internal optical losses and heat resistance. Laser diodes with a stripe contact 100 μm wide demonstrate at room temperature an output optical power exceeding 4 W in a continuous-wave mode and exceeding 20 W in a pulsed mode. (lasers)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Factor of spontaneous emission into the optical dielectric waveguide mode

Within the framework of a complete vector analysis, an expression for the factor of spontaneous emission into the transverse mode of a dielectric waveguide is found. The results are compared with those previously obtained in the framework of the scalar approximation. It is shown that their most significant quantitative difference is possible for waveguides used in diode lasers and amplifiers in which the transverse beam size is commensurable with the wavelength. The conditions for the applicability of the scalar approximation for calculating the spontaneous emission factor are obtained. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗