SEARCH · Engineering Papers

Results for “Variational approach”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

All sources NASA NTRS DOE OSTI

NASA NTRS2012

Variable-Speed Power-Turbine Research at Glenn Research Center

The main rotors of the NASA Large Civil Tilt-Rotor (LCTR) notional vehicle operate over a wide speed-range, from 100 percent at takeoff to 54 percent at cruise. The variable-speed power turbine (VSPT) offers one approach by which to effect this speed variation. VSPT aerodynamics challenges include high work factors at cruise, wide (40 to 60 ) incidence-angle variations in blade and vane rows over the speed range, and operation at low Reynolds numbers. Rotordynamics challenges include potential responsiveness to shaft modes within the 50 percent VSPT speed-range. A research effort underway at NASA Glenn Research Center, intended to address these key aerodynamic and rotordynamic challenges, is described. Conceptual design and 3-D multistage RANS and URANS analyses, conducted internally and under contract, provide expected VSPT sizing, stage-count, performance and operability information, and maps for system studies. Initial steps toward experimental testing of incidence-tolerant blading in a transonic linear cascade are described, and progress toward development/improvement of a simulation capability for multistage turbines with low Reynolds number transitional flow is summarized. Preliminary rotordynamics analyses indicate that viable concept engines with 50 percent VSPT shaft-speed range. Assessments of potential paths toward VSPT component-level testing are summarized.

Welch, Gerard E.↗

NASA NTRSDate not supplied

100 kHz High-Spectral-Resolution NO-PLIF Measurements for Compressible Flows

In the present work, we use a burst-mode laser and optical parametric oscillator system to perform high-spectral resolution NO-PLIF measurements of an underexpanded jet at a repetition-rate of 100 kHz, with the motivation of multi-parameter measurements of temperature, pressure, and velocity. The laser frequency of the 1064 nm seed laser for the burst-mode laser was scanned during the burst to cover two neighboring absorption line pairs near 226 nm. The peak PLIF signal intensity varies along the axial (z) direction of the underexpanded jet as the laser frequency is scanned, which we attribute to the collisional shift induced by the flow and only revealed due to the narrow linewidth of the laser. A pseudo-Voight fit is applied to the LIF excitation spectra on a pixel-by-pixel basis to measure the spectral position of the peak intensity for the two transition pairs and their amplitude. The spectral position of the peak intensity is used to derive a frequency shift, which is separated into its collisional and Doppler components using the axisymmetric nature of the flow field. The amplitude of the measured peaks is used for two-line rotational thermometry. Challenges for quantitative measurements using such an approach are discussed, including measuring the spatial variations in the energy distribution of the laser sheet at a 100 kHz repetition rate and uncertainty/variability in the step size during the fast frequency scan.

laser induced fluorescence↗

NASA NTRSDate not supplied

100 kHz High-Spectral-Resolution NO-PLIF Measurements for Compressible Flows

laser induced fluorescence↗

DOE OSTI2021

Safeguards Material Control And Accountancy Considerations For Molten Salt Reactors

Molten salt reactors are a class of nuclear reactor designs with features and operational characteristics that vary significantly. Variations in design features include the physical, chemical, and isotopic composition of fresh and irradiated fuel, neutron energy spectrums, breeding ratios, and the design’s plans for chemical processing. Specific designs within these variations affect the material control and accountancy approaches implemented by both domestic and international nuclear safeguards. This paper identifies safeguards-relevant design features for molten salt reactors and describes how each feature might influence both domestic and international nuclear safeguards implementation. Additionally, this paper describes two potential general categories of material control and accountancy approaches that may be appropriate for molten salt reactors: a black box material-balance approach with measurements on the feed and waste streams combined with robust containment and surveillance on the nuclear material within the reactor or an approach that aims to quantify the nuclear material throughout the reactor (i.e., a process monitoring approach). This paper describes the benefits and challenges of these approaches to meet technical safeguards objectives and identifies gaps in current technologies.

Hogue, Karen↗

DOE OSTI2023

Microstructural characterization of nuclear graphite: from the microscale to the nanoscale

Multiple reactor designs use graphite as a moderator of the nuclear reactions and as structural support. During the lifetime of the reactor, multiple aging factors such as neutron irradiation, oxidation, and temperature along with others induce changes in the microstructure and crystal lattice of graphite components. The pore morphology and crystal structure of some phases in graphite can be used to trace the evolution of irradiation defects and mechanical properties of graphite. We present a combination of results from several microscopy techniques to investigate the differences between nuclear graphite grades and the effects of neutron irradiation and oxidation at multiple length scales. This multiscale approach is needed to understand the microstructural variations caused by the raw materials and manufacturing processes as well as how the different phases of graphite are affected by the reactor environment. The results provide insight into the oxidation- and radiation-induced changes of graphite and create a robust baseline of microstructure information that can be used for the selection of materials for the next generation of nuclear power stations. Moreover, the experiments conducted in this work provide an overview of the advantages and limitations of the most common techniques used to characterize nuclear graphite and how these techniques might be applied to study other carbon-based materials used in the nuclear industry.

Arregui Mena, Jose'↗

DOE OSTI2025

An Arbitrary Time Interval Generator Base on Vernier Clocks with 0.67 ps Adjustable Steps Implemented in FPGA

In TDC testing and timing system implementations, it is often necessary to generate signal pulses with finely adjustable time intervals. In delay cell–based schemes, the adjustment resolution is constrained by the propagation delay of the cells—typically 15–20 ps per step—and is sensitive to temperature and supply voltage variations. This document presents a fully digital approach that uses two vernier clocks, generated by two stages of cascaded phase-locked loops (PLLs) with a slight frequency difference, to achieve adjustable timing intervals through accumulated phase differences. The scheme was validated on two families of low-cost FPGA devices, achieving adjustable step sizes of 0.67 ps and 0.97 ps.

Wu, Jin-yuan [Fermilab] (ORCID:0000000344329521)↗

DOE OSTI2021

Dynamic time-warping correction for shifts in ultrahigh resolving power ion mobility spectrometry and structures for lossless ion manipulations

Detection of arrival time shifts between ion mobility spectrometry (IMS) separations can limit achievable resolving power (Rp), particularly when multiple separations are summed or averaged, as commonly practiced. Such variations are more apparent in higher Rp measurements, and are particularly evident in long path length traveling wave structures for lossless ion manipulations (SLIM) IMS due to their typically much longer separation times. Here we explore the utility of a data processing approaches employing linear alignment (LA) and nonlinear dynamic time warping (DTW) of IMS separations to correct for variations between separations, such as due to pressure fluctuations. For multipass SLIM IMS separations, where narrow mobility range measurements have arrival times that can extend to several seconds, the LA approach effectively corrected for such variations, and significantly improvement Rp for summed separations. However, LA was much less effective for high Rp broad mobility range separations, such as obtained with multilevel SLIM IMS. Changes in IMS arrival times ions were observed to be correlated with small pressure changes, with approximately 0.6% relative arrival time shifts being common, sufficient to result in a loss of Rp for summed separations. Comparison of the approaches showed DTW alignment performed similarly to LA when used over a narrow mobility range, but was significantly better (providing narrower peaks and higher signal intensities) for wide mobility range data. We found the DTW approach increased Rp by as much as 115% for measurements in which 50 IMS separations over 2 seconds were summed, and leading to a large improvement in effective Rp. We conclude that DTW is superior to LA for ultrahigh resolution broad mobility range SLIM IMS separations, correcting for ion arrival time shifts regardless of the cause. Our tool is publicly available for use with universal ion mobility format (.UIMF) and text (.txt) files.

Data alignment, dynamic time warping, ion mobility↗

NASA NTRS1998

Reference Mission Version 3.0 Addendum to the Human Exploration of Mars: The Reference Mission of the NASA Mars Exploration Study Team

This Addendum to the Mars Reference Mission was developed as a companion document to NASA Special Publication 6107, “Human Exploration of Mars: The Reference Mission of the NASA Exploration Study Team.” The Addendum summarizes changes and updates to the Mars Reference Mission the Exploration Office developed since the final draft of SP 6107 was printed in early 1998. The Reference Mission is a tool used by the Exploration Team and the exploration community to compare and evaluate approaches to mission and system concepts that could be used for human exploration missions. It is intended to identify and clarify system “drivers,” or significant sources of cost, performance, risk, and schedule variation. It does not represent a final or recommended approach to human Mars missions. Several alternative scenarios, including human exploration missions to the Moon, asteroids, or other targets beyond Earth orbit as well as employing different technical approaches to solving mission and technology challenges, are currently under study by the Exploration Team. Comparing alternative approaches provides the basis for continual improvement to technology investment plans and general understanding of future human exploration missions. The Addendum represents a “snapshot” of work in progress in support of planning for future human exploration missions through May 1998. Annual publications of revisions to the Reference Mission are planned beginning in late 1998.

Mars↗

DOE OSTI2025

Transcripts and genomic intervals associated with variation in metabolite abundance in maize leaves under field conditions

Abstract Plants exhibit extensive environment-dependent intraspecific metabolic variation, which likely plays a role in determining variation in whole plant phenotypes. However, much of the work seeking to use natural variation to link genes and transcript’s impacts on plant metabolism has employed data from controlled environments. Here, we generated and analyzed data on the variation in the abundance of 26 metabolites across 660 maize inbred lines under field conditions. We employ these data and previously published transcript and whole plant phenotype data reported for the same field experiment to identify both genomic intervals (through genome-wide association studies (GWAS)) and transcripts (using both transcriptome-wide association studies (TWAS) and an explainable artificial intelligence (AI) approach based on random forest (RF)) associated with variation in metabolite abundance. Both genome-wide association and random forest-based methods identified substantial numbers of significant associations including genes with plausible links to the metabolites they are associated with. In contrast, the transcriptome-wide association identified only six significant associations. In three cases, genetic markers associated with metabolic variation in our study colocalized with markers linked to variation in non-metabolic traits scored in the same experiment. We speculate that the poor performance of transcriptome-wide association studies in identifying transcript-metabolite associations may reflect a high prevalence of non-linear interactions between transcripts and metabolites and/or a bias towards rare transcripts playing a large role in determining intraspecific metabolic variation.

Mathivanan, Ramesh Kanna↗

DOE OSTI2023

A Novel Spatial-Temporal Variational Quantum Circuit to Enable Deep Learning on NISQ Devices

Quantum computing presents a promising approach for machine learning with its capability for extremely parallel computation in high-dimension through superposition and entanglement. Despite its potential, existing quantum learning algorithms, such as Variational Quantum Circuits (VQCs), face challenges in handling more complex datasets, particularly those that are not linearly separable. What’s more, it encounters the deployability issue, making the learning models suffer a drastic accuracy drop after deploying them to the actual quantum devices. To overcome these limitations, this paper proposes a novel spatial-temporal design, namely “ST-VQC”, to integrate nonlinearity in quantum learning and improve the robustness of the learning model to noise. Specifically, ST-VQC can extract spatial features via a novel block-based encoding quantum sub-circuit coupled with a layer-wise computation quantum sub-circuit to enable temporal-wise deep learning. Additionally, a SWAP-Free physical circuit design is devised to improve robustness. These designs bring a number of hyperparameters. After a systematic analysis of the design space for each design component, an automated optimization framework is proposed to generate the ST-VQC quantum circuit. The proposed ST-VQC has been evaluated on two IBM quantum processors, ibm-cairo with 27 qubits and ibmq-lima with 7 qubits to assess its effectiveness. The results of the evaluation on the standard dataset for binary classification show that ST-VQC can achieve over 30% accuracy improvement compared with existing VQCs on actual quantum computers. Moreover, on a non-linear synthetic dataset, the STVQC outperforms a linear classifier by 27.9%, while the linear classifier using classical computing outperforms the existing VQC by 15.58%.

Li, Jinyang↗

DOE OSTI2025

Full event particle-level unfolding with variable-length latent variational diffusion

The measurements performed by particle physics experiments must account for the imperfect response of the detectors used to observe the interactions. One approach, unfolding, statistically adjusts the experimental data for detector effects. Recently, generative machine learning models have shown promise for performing unbinned unfolding in a high number of dimensions. However, all current generative approaches are limited to unfolding a fixed set of observables, making them unable to perform full-event unfolding in the variable dimensional environment of collider data. A novel modification to the variational latent diffusion model (VLD) approach to generative unfolding is presented, which allows for unfolding of high- and variable-dimensional feature spaces. The performance of this method is evaluated in the context of semi-leptonic t\bar{t} t t ‾ production at the Large Hadron Collider.

Shmakov, Alexander↗

DOE OSTI2025

A Game-Theoretic Quantum Algorithm for Solving Magic Squares

Variational quantum algorithms (VQAs) offer a promising near-term approach to finding optimal quantum strategies for playing non-local games. These games test quantum correlations beyond classical limits and enable entanglement verification. In this work, we present a variational framework for the Magic Square Game (MSG), a two-player non-local game with perfect quantum advantage. We construct a value Hamiltonian that encodes the game’s parity and consistency constraints, then optimize parameterize quantum circuits to minimize this cost. Our approach build on the stabilizer formalism, leverages commutation structure for circuit design, and is hardware-efficient. Compared to existing work, our contribution emphasizes algebraic structure an interpretability. We validate our method through numerical experiments and outline generalizations to larger games.

Chehade, Sarah [ORNL]↗

NASA NTRS1993

From minerals to rocks: Toward modeling lithologies with remote sensing

High spectral resolution imaging spectroscopy will play an important role in future planetary missions. Sophisticated approaches will be needed to unravel subtle, super-imposed spectral features typically of natural systems, and to maximize the science return of these instruments. Carefully controlled laboratory investigations using homogeneous mineral separates have demonstrated that variations due to solid solution, changes in modal abundances, and the effects of particle size are well understood from a physical basis. In many cases, these variations can be modeled quantitatively using photometric models, mixing approaches, and deconvolution procedures. However, relative to the spectra of individual mineral components, reflectance spectra of rocks and natural surfaces exhibit a reduced spectral contrast. In addition, soils or regolith, which are likely to dominate any natural planetary surface, exhibit spectral properties that have some similarities to the parent materials, but due to weathering and alteration, differences remain that cannot yet be fully recreated in the laboratory or through mixture modeling. A significant challenge is therefore to integrate modeling approaches to derive both lithologic determinations and include the effects of alteration. We are currently conducting laboratory investigations in lithologic modeling to expand upon the basic results of previous analyses with our initial goal to more closely match physical state of natural systems. The effects of alteration are to be considered separately.

Mustard, John F.↗

NASA NTRS1991

Neptune's cloud structure in 1989 - Photometric variations and correlation with ground-based images

Ground-based photoelectric photometry in b, y, and the 6190 and 7250 A methane-bands, as well as spectrum scans of the methane 6190 A band and CCD images at 6190 and 8900 A, were obtained for Neptune during Voyager 2's approach of that planet on August 24, 1989. Photometric variations are presently correlated with the disk transit of bright planetary features, and the changes in feature distribution and brightness noted in the results are evaluated for implications bearing on long-term variability. It is suggested that the long-term secular variation is related to a slow change in a size of location of both the bright companion and the Great Dark Spot.

Lockwood, G. W.↗

NASA NTRS2000

Assessment of Low Cycle Fatigue Behavior of Powder Metallurgy Alloy U720

The fatigue lives of modem powder metallurgy disk alloys are influenced by variabilities in alloy microstructure and mechanical properties. These properties can vary as functions of variables the different steps of materials/component processing: powder atomization, consolidation, extrusion, forging, heat treating, and machining. It is important to understand the relationship between the statistical variations in life and these variables, as well as the change in life distribution due to changes in fatigue loading conditions. The objective of this study was to investigate these relationships in a nickel-base disk superalloy, U720, produced using powder metallurgy processing. Multiple strain-controlled fatigue tests were performed at 538 C (1000 F) at limited sets of test conditions. Analyses were performed to: (1) assess variations of microstructure, mechanical properties, and LCF failure initiation sites as functions of disk processing and loading conditions; and (2) compare mean and minimum fatigue life predictions using different approaches for modeling the data from assorted test conditions. Significant variations in life were observed as functions of the disk processing variables evaluated. However, the lives of all specimens could still be combined and modeled together. The failure initiation sites for tests performed at a strain ratio R(sub epsilon) = epsilon(sub min)/epsilon(sub max) of 0 were different from those in tests at a strain ratio of -1. An approach could still be applied to account for the differences in mean and maximum stresses and strains. This allowed the data in tests of various conditions to be combined for more robust statistical estimates of mean and minimum lives.

Gabb, Tomothy P.↗

NASA NTRS2006

SABER (TIMED) and MLS (UARS) Temperature Observations of Mesospheric and Stratospheric QBO and Related Tidal Variations

More than three years of temperature observations from the SABER (TIMED) and MLS WARS) instruments are analyzed to study the annual and inter-annual variations extending from the stratosphere into the upper mesosphere. The SABER measurements provide data from a wide altitude range (15 to 95 km) for the years 2002 to 2004, while the MLS data were taken in the 16 to 55 km altitude range a decade earlier. Because of the sampling properties of SABER and MLS, the variations with local solar time must be accounted for when estimating the zonal mean variations. An algorithm is thus applied that delineates with Fourier analysis the year-long variations of the migrating tides and zonal mean component. The amplitude of the diurnal tide near the equator shows a strong semiannual periodicity with maxima near equinox, which vary from year to year to indicate the influence from the Quasi-biennial Oscillation (QBO) in the zonal circulation. The zonal mean QBO temperature variations are analyzed over a range of latitudes and altitudes, and the results are presented for latitudes from 48"s to 48"N. New results are obtained for the QBO, especially in the upper stratosphere and mesosphere, and at mid-latitudes. At Equatorial latitudes, the QBO amplitudes show local peaks, albeit small, that occur at different altitudes. From about 20 to 40 km, and within about 15" of the Equator, the amplitudes can approach 3S K for the stratospheric QBO or SQBO. For the mesospheric QBO or MQBO, we find peaks near 70 km, with temperature amplitudes reaching 3.5"K, and near 85 km, the amplitudes approach 2.5OK. Morphologically, the amplitude and phase variations derived from the SABER and MLS measurements are in qualitative agreement. The QBO amplitudes tend to peak at the Equator but then increase again pole-ward of about 15" to 20'. The phase progression with altitude varies more gradually at the Equator than at mid-latitudes. A comparison of the observations with results from the Numerical Spectral Model (NSM) reveals that there is qualitative agreement. The NSM generates the QBO extending from the stratosphere into the upper mesosphere, with temperature variations extending to mid latitudes, but the predicted amplitudes are smaller than those observed.

Huang, Frank T.↗

DOE OSTI2021

Structural, Electrical, and Electromechanical Properties of Inverse Hybrid Perovskites from First-Principles: The Case of (CH 3 NH 3 ) 3 OI

Inverse-hybrid perovskites (IHPs) with large polarization have recently been predicted from first-principles computations. Here, we use one representative from the IHP class of materials, (CH 3 NH 3 ) 3 OI (MA3OI), to propose a route to the first-principles prediction of structural and electrical properties, such as polarization, polarization reversibility, and the associated coercive field for hybrid organic–inorganic perovskites. The route relies on the construction of the polarization reversal path that models experimental measurements. Such a path was found to play an important role in the ground-state search as well as in the identification of competing structural variations. The latter is believed to be the origin of the structural disorder that is characteristic of hybrid organic–inorganic perovskites. The application of such an approach to MA3OI leads to the prediction of several structural variations that are expected to result in a structurally disordered phase above 766 K and of the polar ground state with a polarization of 25.3 μC/cm 2 that is reversible with the application of an electric field. The upper estimate for the coercive field associated with homogeneous polarization reversal is 6.9 GV/m. The piezoelectric constants of MA3OI are predicted to be an order of magnitude smaller in comparison with a prototypical inorganic ferroelectric PbTiO 3 ; however, the low symmetry of the MA3OI structure yields finite values for all components of the piezoelectric tensor. The polarization in MA3OI is tunable by the epitaxial strain (11.5% change under 5% epitaxial strain), although less so as compared with PbTiO 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2005

Spectral Ratio Imaging with Hyperion Satellite Data for Geological Mapping

Since the advent of LANDSAT I in 1972, many different multispectral satellites have been orbited by the U.S. and other countries. These satellites have varied from 4 spectral bands in LANDSAT I to 14 spectral bands in the ASTER sensor aboard the TERRA space platform. Hyperion is a relatively new hyperspectral sensor with over 220 spectral bands. The huge increase in the number of spectral bands offers a substantial challenge to computers and analysts alike when it comes to the task of mapping features on the basis of chemical composition, especially if little or no ground truth is available beforehand from the area being mapped. One approach is the theoretical approach of the modeler, where all extraneous information (atmospheric attenuation, sensor electronic gain and offset, etc.) is subtracted off and divided out, and laboratory (or field) spectra of materials are used as training sets to map features in the scene of similar composition. This approach is very difficult to keep accurate because of variations in the atmosphere, solar illumination, and sensor electronic gain and offset that are not always perfectly recorded or accounted for. For instance, to apply laboratory or field spectra of materials as data sets from the theoretical approach, the header information of the files must reflect the correct, up-to-date sensor electronic gain and offset and the analyst must pick the exact atmospheric model that is appropriate for the day of data collection in order for classification procedures to accurately match pixels in the scene with the laboratory or field spectrum of a desired target on the basis of the hyperspectral data. The modeling process is so complex that it is difficult to tell when it is operating well or determine how to fix it when it is incorrect. Recently RSI has announced that the latest version of their ENVI software package is not performing atmospheric corrections correctly with the FLAASH atmospheric model. It took a long time to determine that it was wrong, and may take an equally long time (or longer) to fix.

Vincent, Robert K.↗