Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VISIBILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Visible and near-infrared excitation spectra from the neptunyl ion doped into a uranyl tetrachloride lattice

We present that visible and near-infrared illumination induces 5f-5f and ligand-to-metal charge-transfer (LMCT) transitions of the neptunyl tetrachloride anion in polycrystalline Cs 2 U(Np)O 2 Cl 4 , and results in near-infrared luminescence from the second electronically excited state to the ground state. This photoluminescence is used as a detection method to collect excitation spectra throughout the near-infrared and visible regions. The excitation spectra of LMCT transitions in excitation spectra were identified in previous work. Here the measurement and analysis is extended to include both LMCT and intra-5f transitions. The results manifest variation in structural properties of the neptunium-oxo bond among the low-lying electronic states. Vibronic intensity patterns and energy spacings are used to compare bond lengths and vibrational frequencies in the excited states, confirming significant characteristic differences between those excited by 5f-5f transitions from those due to LMCT transitions. Lastly, results are compared with recently published RASPT2/SO calculations of [NpO 2 Cl 4 ] 2- .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Search for non-resonant production of semi-visible jets using Run 2 data in ATLAS

Semi-visible jets, with a significant contribution to the event's missing transverse momentum, can arise in strongly interacting dark sectors. This results in an event topology where one of the jets can be aligned with the direction of the missing transverse momentum. The first search for semi-visible jets produced via a t-channel mediator exchange is presented. The analysis uses proton-proton collisions with an integrated luminosity of 139 fb —1 and a centre-of-mass energy of 13 TeV, collected with the ATLAS detector during the Run 2 of the LHC. No excess over Standard Model predictions is observed. Assuming a coupling strength of unity between the mediator, a Standard Model quark and a dark quark, mediator masses up to 2.7 TeV are excluded at the 95% confidence level. Upper limits on the coupling strength are also derived.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Visible Light Absorption and Hot Carrier Trapping in Anatase TiO 2 : The Role of Surface Oxygen Vacancies

Anatase TiO 2 is an efficient water splitting photocatalyst using UV light, but solar energy harvesting requires the presence of midgap states to increase visible light absorption. Despite numerous studies, important questions remain regarding the photophysics in O vacancy doped TiO 2 . Here, by employing extreme ultraviolet reflection–absorption (XUV-RA) spectroscopy at the Ti M2,3-edge, spectral signatures of both large and small polaron states are identified, allowing ultrafast electron and hole dynamics in these states to be independently resolved. Results show that visible light absorption occurs via promotion of an electron from the small polaron state to the TiO 2 conduction band. In contrast, absorption of UV light results in direct band gap excitation followed by carrier relaxation during which hot holes trap as small polarons in 45 ± 42 fs, and hot electrons couple to polar optical phonons leading to vibrational coherence and large polaron formation in 945 ± 92 fs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lifetime Enhancement of Visible Light Induced Photocharges in Tungsten and Nitrogen in situ Codoped TiO 2 :WN Thin Films

We report on one-step in situ codoped TiO2 thin films synthesized by cosputtering. The purpose of this acceptor-donor passivated codoping approach is to overcome the optoelectronic limitations that arise for monodoped TiO2 in photocatalytic applications. To evaluate these added benefits, the TiO2:WN thin films were characterized by different techniques. X-ray diffraction patterns and X-ray photoelectron spectral analysis revealed that both N and W dopants are mostly present in the desired substitutional locations. Additionally, the codoping approach was found to reduce the internal strain and defect density of the TiO2:WN films as compared to their monodoped TiO2:N counterparts. This defect reduction is confirmed via photocharge lifetime variation obtained using visible light flash photolysis time-resolved microwave conductivity measurements (FP-TRMC). Photocharge lifetime analysis indicated the presence of three distinct decay processes: charge trapping, recombination, and surface reactions. These characteristic lifetimes of the codoped TiO2:WN films (i.e., 0.08, 0.75, and 11.5 us, respectively) were found to be about double those of their nitrogen monodoped TiO2:N counterparts (i.e., 0.03, 0.35, and 6.8 us), quantitatively confirming the effective passivating outcome of the tungsten-nitrogen codoping approach developed here. The practicality of this method was confirmed by integrating the TiO2:WN films as photoanodes for the electro-photocatalytic, solar light driven degradation of a real pollutant (i.e., atrazine). A significant increase in the degradation kinetics, leading to a 4-fold increase in the pseudo-first-order degradation constant for the optimally doped TiO2:WN photoanodes (0.106 min-1) from the undoped TiO2-x ones (0.026 min-1), is a direct consequence of the increased photocharge lifetimes in tandem with visible light photosensitivity.

14 SOLAR ENERGY↗

Rattling of Oxygen Ions in a Sub-Nanometer-Sized Cage Converts Terahertz Radiation to Visible Light

A simple and robust approach to visualization of terahertz (THz) light would open up opportunities to couple physical phenomena that occur at fundamentally different energy scales. Here we demonstrate how nanoscale cages of Ca 12 Al 14 O 33 crystal enable a novel method for conversion THz radiation to visible light. These crystallographic cages contain weakly bonded oxygen ions and give rise to a low-energy conduction band that can populated with localized yet mobile electrons. THz light excites a nearly stand-alone rattling motion of the encaged species, which promotes electron transfer from them to the neighboring cages. When the power of THz light reaches tens of watts, the coupling between forced rattling in the confined space, electronic excitation and ionization of oxygen species and corresponding recombination processes result in emission of bright visible light.

Toda, Yoshitake↗

Broadband Liquid Crystal Tunable Metasurfaces in the Visible: Liquid Crystal Inhomogeneities Across the Metasurface Parameter Space

Optical metasurfaces—planar nanostructured devices that can arbitrarily tailor the wavefront of light—may be reconfigured by changing their dielectric environment. The application of external stimuli to liquid crystals is a particularly promising means of tuning the optical properties of embedded metasurfaces because of liquid crystals' large and broadband optical anisotropy. However, the detailed behavior of liquid crystals immediately adjacent to the nanostructured meta-atoms elements is often overlooked, despite the optics of the device depending sensitively on this behavior (e.g., the spectral position of the meta-atom resonances). This is of increasing concern as the wavelength of operation further approaches the short-wavelength end of the visible spectrum and, therefore, the length scale of the inhomogeneities in the liquid crystal director field. In this manuscript, we undertake a fully comprehensive study, across the metasurface geometrical parameter space, of broadband (450-700 nm) all-dielectric liquid crystal tunable metasurfaces operating in the visible. Here, through combined experimental characterization, liquid crystal modeling, and optical simulations, we reveal and quantify the improved accuracy with which the optical properties of the liquid crystal tunable metasurfaces may be described, and identify the underlying physical mechanism: the three-dimensional spatial overlap of the liquid crystal director field and metasurface optical near fields in the vicinity of the meta-atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Iron(III)-oxo centers on TiO{sub 2} for visible light photocatalysis.

Isolated iron(III)-oxo clusters were synthesized onto TiO{sub 2} using atomic layer deposition. The Fe{sub x}O{sub y}/TiO{sub 2} nanocomposites have unique properties that enable not only absorption of visible light, but efficient photocatalysis as demonstrated by methylene blue degradation. The localization of photogenerated electrons in core TiO{sub 2} nanocrystallites upon visible light excitation demonstrates coupling of conduction bands of mixed oxides. The redox properties of photogenerated charges in nanocomposites were studied using in situ electron paramagnetic resonance spectroscopy.

36 MATERIALS SCIENCE↗

Visible-Light Photoredox Catalysis: Selective Reduction of Carbon Dioxide to Carbon Monoxide by a Nickel N-Heterocyclic Carbene-Isoquinoline Complex

The solar-driven reduction of carbon dioxide to value-added chemical fuels is a longstanding challenge in the fields of catalysis, energy science, and green chemistry. In order to develop effective CO2 fixation, several key considerations must be balanced, including (1) catalyst selectivity for promoting CO2 reduction over competing hydrogen generation from proton reduction, (2) visible-light harvesting that matches the solar spectrum, and (3) the use of cheap and earth-abundant catalytic components. In this report, we present the synthesis and characterization of a new family of earth-abundant nickel complexes supported by N-heterocyclic carbene amine ligands that exhibit high selectivity and activity for the electrocatalytic and photocatalytic conversion of CO2 to CO. Systematic changes in the carbene and amine donors of the ligand have been surveyed, and [Ni(Prbimiq1)]2+ (1c, where Prbimiq1 = bis(3-(imidazolyl)isoquinolinyl)propane) emerges as a catalyst for electrochemical reduction of CO2 with the lowest cathodic onset potential (Ecat = 1.2 V vs SCE). Using this earth-abundant catalyst with Ir(ppy)3 (where ppy = 2-phenylpyridine) and an electron donor, we have developed a visible-light photoredox system for the catalytic conversion of CO2 to CO that proceeds with high selectivity and activity and achieves turnover numbers and turnover frequencies reaching 98,000 and 3.9 s1, respectively. Further studies reveal that the overall efficiency of this solar-to-fuel cycle may be limited by the formation of the active Ni catalyst and/or the chemical reduction of CO2 to CO at the reduced nickel center and provide a starting point for improved photoredox systems for sustainable carbon-neutral energy conversion.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

p -Type CuRhO 2 as a Self-Healing Photoelectrode for Water Reduction under Visible Light

Polycrystalline CuRhO 2 is investigated as a photocathode for the splitting of water under visible irradiation. The band edge positions of this material straddle the water oxidation and reduction redox potentials. Thus, photogenerated conduction band electrons are sufficiently energetic to reduce water, while the associated valence band holes are energetically able to oxidize water to O 2 . Under visible illumination, H 2 production is observed with ~0.2 V underpotential in an air-saturated solution. In contrast, H 2 production in an Ar-saturated solution was found to be unstable. This instability is associated with the reduction of the semiconductor forming Cu(s). However, in the presence of air or O 2 , bulk Cu(s) was not detected, implying that CuRhO 2 is self-healing when air is present. Here, this property allows for the stable formation of H 2 with ca. 80% Faradaic efficiency.

08 HYDROGEN↗

An Artificial Z-Scheme Constructed from Dye-Sensitized Metal Oxide Nanosheets for Visible Light-Driven Overall Water Splitting

Sensitization of a wide-gap oxide semiconductor with a visible-light-absorbing dye has been studied for decades as a means of producing H 2 from water. However, efficient overall water splitting using a dye-sensitized oxide photocatalyst has remained an unmet challenge. Here in this paper we demonstrate visible-light-driven overall water splitting into H 2 and O 2 using HCa 2 Nb 3 O 10 nanosheets sensitized by a Ru(II) tris-diimine type photosensitizer, in combination with a WO 3 -based water oxidation photocatalyst and a triiodide/iodide redox couple. With the use of Pt-intercalated HCa 2 Nb 3 O 10 nanosheets further modified with amorphous Al 2 O 3 clusters as the H 2 evolution component, the dye-based turnover number and frequency for H 2 evolution reached 4580 and 1960 h –1 , respectively. The apparent quantum yield for overall water splitting using 420 nm light was 2.4%, by far the highest among dye- sensitized overall water splitting systems reported to date. The present work clearly shows that a carefully designed dye/oxide hybrid has great potential for photocatalytic H 2 production, and represents a significant leap forward in the development of solar-driven water splitting systems.

14 SOLAR ENERGY↗

Visible Light Harvesting Cr(III) Photocatalysts

Pseudo-octahedral Cr(III) photosensitizers offer a promising alternative to Ru(II)/Ir(III) MLCT chromophores due to their long-lived, strongly photo-oxidizing excited states, yet suffer from poor visible-light absorption. Here, to address this challenge, we prepared a series of homoleptic Cr(III) trissd phenanthroline) complexes bearing arylacetylene units on the 4- and 7-positions at each phenanthroline core. This modification produced a >1 eV bathochromic shift in intraligand (IL) π–π* transitions and enhanced absorption across the UVA and blue-to-green regions (ε ∼25,000–100,000 M –1 cm –1 ) compared to [Cr(phen) 3 ] 3+ , eclipsing traditional MLCT photosensitizers while leaving 2 E ligand-field-emission energies largely unaffected. Nanosecond transient absorption and photoluminescence measurements confirmed long excited-state lifetimes (τ = 33–119 μs in CH 3 ) while featuring strongly oxidizing excited-state potentials: E°'([Cr] 3+ */ 2+ ) = 0.97–1.09 V vs. Fc +/0 . High quantum yields for 1 O 2 production (Φ Δ ≤ 0.85) resulted in efficient photosensitized oxidation of 1,5-dihydroxynaphthalene to juglone under blue or green light irradiation within 30 min (0.1–0.2 mol % catalyst loading). Photocatalytic [4 + 2] cycloadditions under blue or green light (yields up to 100%) were also demonstrated at low catalyst loadings (0.1–0.3 mol %). The combined results demonstrate that large visible absorption cross sections are readily achievable in Cr(III) diimines by leveraging IL transitions, without compromising excited-state energetics or lifetimes.

Wheeler, Jonathan P. [North Carolina State Univers↗

Visible Mie Scattering in Nonabsorbing Hollow Sphere Powders

Hollow silica nanoparticles (HSNP) with diameters comparable to visible wavelengths and with thin shells (<15 nm) feature an unexpected color effect. Single particle and powder spectroscopy, as well as calculations based on Mie theory were used to investigate this phenomenon. The use of HSNPs increases the transport mean free path of light significantly, which reduces multiple scattering, and thus the Mie resonances become visible to the bare eye.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Large optical nonlinearity of ITO nanorods for sub-picosecond all-optical modulation of the full-visible spectrum

Optical nonlinearity induced by intense optical excitation of mobile electrons in metallic nanostructures can provide dynamic tuning of their electromagnetic response, which is potentially useful for all-optical information processing. Here we report on the sub-picosecond optical nonlinearity of indium tin oxide nanorod arrays (ITO-NRAs) following intraband, on-plasmon-resonance optical pumping, which enables modulation of the full-visible spectrum with large absolute change of transmission, favorable spectral tunability and beam-steering capability. We semi-quantitatively model the permittivity change, whose large amplitude stems from a significant electron redistribution under intraband pumping due to the low electron concentration. Further, we observe a transient response in the microsecond regime associated with the slow lattice cooling, which arises from the large aspect-ratio and low thermal conductivity of ITO-NRAs. Finally, our results demonstrate that all-optical control of the visible spectrum can be achieved by using heavily doped wide-bandgap semiconductors in their transparent regime with speed faster than that of noble metals.

36 MATERIALS SCIENCE↗

Visible-to-THz near-field nanoscopy

Optical microscopy has a key role in research, development and quality control across a wide range of scientific, technological and medical fields. However, diffraction limits the spatial resolution of conventional optical instruments to about half the illumination wavelength. A technique that surpasses the diffraction limit in the wide spectral range between visible and terahertz frequencies is scattering-type scanning near-field optical microscopy (s-SNOM). The basis of s-SNOM is an atomic force microscope in which the tip is illuminated with light from the visible to the terahertz spectral range. By recording the elastically tip-scattered light while scanning the sample below the tip, s-SNOM yields near-field optical images with a remarkable resolution of 10 nm, simultaneously with the standard atomic force microscopic topography image. This resolution is independent of the illumination wavelength, rendering s-SNOM a versatile nanoimaging and nanospectroscopy technique for fundamental and applied studies of materials, structures and phenomena. This Review presents an overview of the fundamental principles governing the measurement and interpretation of near-field contrasts and discusses key applications of s-SNOM. We also showcase emerging developments that enable s-SNOM to operate under various environmental conditions, including cryogenic temperatures, electric and magnetic fields, electrical currents, strain and liquid environments. Furthermore, all these recent developments broaden the applicability of s-SNOMs for exploring fundamental solid-state and quantum phenomena, biological matter, catalytic reactions and more.

Hillenbrand, Rainer [CIC nanoGUNE BRTA and Departm↗

Label-free nanoscopy of cell metabolism by ultrasensitive reweighted visible stimulated Raman scattering

Nanoscopic imaging of cell metabolism is hindered by the incompatibility of small metabolites with fluorescent dyes and the limited resolution of imaging mass spectrometry. We present ultrasensitive reweighted visible stimulated Raman scattering (URV-SRS), a label-free vibrational nanoscopy technique that enables multiplexed detection of metabolic nanostructures within cells. We developed an extensively chirped spectral focusing visible SRS microscope that achieves a detection limit of 4,000 molecules and introduced a self-supervised learning-based denoiser to robustly suppress non-independent SRS noise by over 7.2 dB. The instrumentation-based signal enhancement and computation-based noise suppression synergistically improved the detection sensitivity by 50 times over near-infrared SRS. Leveraging this enhanced sensitivity, we further pushed the resolution to nanoscopic levels by introducing Fourier reweighting to amplify sub-100 nm spatial frequencies previously overwhelmed by noise. Validated by Fourier ring correlation, URV-SRS achieves a lateral resolution of 86 nm in cellular imaging. Here, we applied URV-SRS to elucidate the reprogramming of metabolic nanostructures associated with virus replication in Vero E6 host cells and to compositionally delineate subcellular fatty acid synthesis in engineered Escherichia coli, demonstrating its capability towards nanoscopic spatial metabolomics.

59 BASIC BIOLOGICAL SCIENCES↗

Nanoimprinted High-Refractive Index Active Photonic Nanostructures Based on Quantum Dots for Visible Light

A novel method to realizing printed active photonic devices was developed using nanoimprint lithography (NIL), combining a printable high-refractive index material and colloidal CdSe/CdS quantum dots (QDs) for applications in the visible region. Active media QDs were applied in two different ways: embedded inside a printable high-refractive index matrix to form an active printable hybrid nanocomposite, and used as a uniform coating on top of printed photonic devices. As a proof-of-demonstration for printed active photonic devices, two-dimensional (2-D) photonic crystals as well as 1D and 2D photonic nanocavities were successfully fabricated following a simple reverse-nanoimprint process. We observed enhanced photoluminescence from the 2D photonic crystal and the 1D nanocavities. Outstandingly, the process presented in this study is fully compatible with large-scale manufacturing where the patterning areas are only limited by the size of the corresponding mold. This work shows that the integration of active media and functional materials is a promising approach to the realization of integrated photonics for visible light using high throughput technologies. We believe that this work represents a powerful and cost-effective route for the development of numerous nanophotonic structures and devices that will lead to the emergence of new applications.

36 MATERIALS SCIENCE↗

Gallium phosphide optical metasurfaces for visible light applications

There are few materials that are broadly used for fabricating optical metasurfaces for visible light applications. Gallium phosphide (GaP) is a material that, due to its optical properties, has the potential to become a primary choice but due to the difficulties in fabrication, GaP thin films deposited on transparent substrates have never been exploited. In this article we report the design, fabrication, and characterization of three different amorphous GaP metasurfaces obtained through sputtering. Although the material properties can be further optimized, our results show the potential of this material for visible applications making it a viable alternative in the material selection for optical metasurfaces.

36 MATERIALS SCIENCE↗

Visible-light H 2 evolution using dye-sensitized TiO 2 : effects of physicochemical properties of TiO 2 on excited carrier dynamics and activity

Dye-sensitized photocatalysts have emerged as promising materials for solar-driven water splitting due to their ability to utilize visible light, in contrast to conventional wide-band-gap semiconductors. However, the relationship between semiconductor properties and charge carrier dynamics remains insufficiently understood. In this study, we investigated Pt/TiO 2 systems sensitized with a visible-light-absorbing Ru(II) polypyridyl complex (RuP), focusing on how the crystal phase and specific surface area of TiO 2 influence excited carrier dynamics and H 2 evolution activity. To isolate the effects of TiO 2 properties, Pt and RuP loadings were standardized across samples. Emission lifetime analysis showed similarly efficient electron injection from RuP to TiO 2 in all cases, suggesting that injection efficiency does not account for observed differences in activity. Transient absorption measurements revealed that back electron transfer (BET) rates depended strongly on the TiO 2 phase, with anatase and P25 exhibiting slower BET and higher activity for H 2 evolution than rutile. The highest apparent quantum yield for H 2 evolution was 12.0% at 450 nm. Among anatase samples, larger surface areas correlated with higher activity, while smaller-area samples exhibited slower BET rates but still low H 2 evolution activity, implying a role for RuP dye–dye interactions in performance loss. This was further supported by improvements in H 2 evolution activity by lowering RuP loading or adding co-adsorbents. Overall, these results demonstrate that both BET suppression and control over RuP dye aggregation are essential for designing efficient dye-sensitized photocatalytic systems.

Harada, Kakeru [Institute of Science Tokyo (Japan)↗