Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transitional flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Active nematic ratchet in asymmetric obstacle arrays

We numerically investigate the effect of an asymmetric periodic obstacle array in a two-dimensional active nematic. We find that activity in conjunction with the asymmetry leads to a ratchet effect or unidirectional flow of the fluid along the asymmetry direction. The directional flow is still present even in the active turbulent phase when the gap between obstacles is sufficiently small. We demonstrate that the dynamics of the topological defects transition from flow mirroring to smectic-like as the gap between obstacles is made smaller, and explain this transition in terms of the pinning of negative winding number defects between obstacles. This also leads to a nonmonotonic ratchet effect magnitude as a function of obstacle size, so that there is an optimal obstacle size for ratcheting at fixed activity.

36 MATERIALS SCIENCE↗
NASA NTRS2008

Implementation and Validation of a Laminar-to-Turbulent Transition Model in the Wind-US Code

A bypass transition model has been implemented in the Wind-US Reynolds Averaged Navier-Stokes (RANS) solver. The model is based on the Shear Stress Transport (SST) turbulence model and was built starting from a previous SST-based transition model. Several modifications were made to enable (1) consistent solutions regardless of flow field initialization procedure and (2) fully turbulent flow beyond the transition region. This model is intended for flows where bypass transition, in which the transition process is dominated by large freestream disturbances, is the key transition mechanism as opposed to transition dictated by modal growth. Validation of the new transition model is performed for flows ranging from incompressible to hypersonic conditions.

Denissen, Nicholas A.↗
NASA NTRS1994

Turbulent Flow In A Circular-To-Rectangular Transition Duct

NASA technical memorandum describes experiments and analysis of experimental data pertaining to subsonic, turbulent flow of air in duct that includes gradual transition from circular cross section at inlet to rectangular cross section at outlet. Study intended to support further research on physics of flow, by providing comprehensive set of data for calibration and verification of computer codes for simulation of transition-duct flows and mathematical models of turbulence in flows in which effects of curvature of streamlines important.

Davis, David O.↗
NASA NTRS2006

Measurements of Unsteady Wake Interference Between Tandem Cylinders

A multi-phase, experimental study in the Basic Aerodynamics Research Tunnel at the NASA Langley Research Center has provided new insight into the unsteady flow interaction around cylinders in tandem arrangement. Phase 1 of the study characterized the mean and unsteady near-field flow around two cylinders of equal diameter using 2-D Particle Image Velocimetry (PIV) and hot-wire anemometry. These measurements were performed at a Reynolds number of 1.66 x 10(exp 5), based on cylinder diameter, and spacing-to-diameter ratios, L/D, of 1.435 and 3.7. The current phase, Phase 2, augments this dataset by characterizing the surface flow on the same configurations using steady and unsteady pressure measurements and surface flow visualization. Transition strips were applied to the front cylinder during both phases to produce a turbulent boundary layer upstream of the flow separation. For these flow conditions and L/D ratios, surface pressures on both the front and rear cylinders show the effects of L/D on flow symmetry, pressure recovery, and the location of flow separation and attachment. Mean streamlines and instantaneous vorticity obtained from the PIV data are used to explain the flow structure in the gap and near-wake regions and its relationship to the unsteady surface pressures. The combination of off-body and surface measurements provides a comprehensive dataset to develop and validate computational techniques for predicting the unsteady flow field at higher Reynolds numbers.

Jenkins, Luther N.↗
NASA NTRS2004

Minnowbrook IV: 2003 Workshop on Transition and Unsteady Aspects of Turbomachinery Flows

On August 17 to 20, 2003, over 40 attendees participated in a workshop entitled "Minnowbrook IV.2003 Workshop on Transition and Unsteady Aspects of Turbomachinery Flows. Earlier themes focused on improving the understanding of late stage (final breakdown) of boundary layer transition. The specific engineering application of improving design codes for turbomachinery was encouraged by the attendance of representatives from gas turbine manufacturers. Written papers were not requested. Abstracts and copies of figures were the only written record of the workshop aside from specifically commissioned transcriptions of a workshop summary and the extensive working group reports, discussions, and summary that followed on the final morning of the workshop.

LaGraff, John E.↗
NASA NTRS1991

Liquid-Crystal Coats Help Make Flows Visible

Visible indication of transition of boundary layer from laminar to turbulent flow plays important role in aerodynamic tests in wind tunnels and in flight. In newly developed method, liquid-crystal coats used to make visible such features of boundary-layer flows as transitions, separations, and locations of shocks. Changes of color rapid and reversible. For flight applications, provides capability for making transitions visible throughout almost entire altitude and speed ranges of subsonic aircraft. Also applicable to visible indication of supersonic flows and suitable for general use in high- and low-speed wind-tunnel and water-tunnel testing.

Holmes, Bruce J.↗
NASA NTRS1987

Numerical experiments on transition control in wall-bounded shear flows

Results are presented from a numerical simulation of transition control in plane channel and boundary layer flows. The analysis is based on a pseudo-spectral/finite difference semi-implicit solution procedure employed to numerically integrate the time-dependent, three-dimensional, incompressible Navier-Stokes equations in a doubly periodic domain. In the channel flow, it was found that the active periodic suction/blowing method was effective in controlling strongly three-dimensional disturbances. In the boundary layer, the preliminary analysis indicated that in the early stages, passive control by suction is as effective as active control to suppress instabilities. The current work is focused on a detailed comparison of active and passive control by suction/blowing in the boundary layer.

Biringen, S.↗
NASA NTRS1982

An explanation for the systematic flow of plasma in the solar transition region

Using numerical simulations, it is shown that the systematic flow of plasma along a coronal magnetic flux tube is easily produced by a change in the spatial dependence of the heating rate from a symmetric deposition which supports a stationary equilibrium to a time-independent asymmetric deposition. The velocity of the flow is roughly proportional to the heating symmetry and is directed to the side of the loop away from the bulk of the energy deposition.

Boris, J. P.↗
NASA NTRS1991

Local and overall aerodynamic coefficients for bodies in hypersonic, rarefied flow

A computational method is given for the prediction of local pressure and viscous shear stress on windward surfaces of bluff, convex, axisymmetric or quasi-axisymmetric, hypersonic bodies in the transitional, rarefied flow regime. Overall aerodynamic forces and moments are computed by integration of the local quantities. The method is based upon a correlation of local pressure and shear stress computed by the direct simulation Monte Carlo (DSMC) numerical technique for cold wall, real gas conditions and some supplemental data from low-density, hypersonic wind tunnels. The relative simplicity of the method makes it feasible to do the necessary calculations with a personal computer. Two-dimensional shapes and leeward surfaces are not included in the scope of the method as it is presented here. Results are compared with DSMC computations for both local and overall coefficients. The latter includes sphere and blunt cone drag as well as lift and pitching moment coefficients for the NASA AFE vehicle at various angles of attack. Very satisfactory agreement is shown.

Potter, J. Leith↗
NASA NTRS1986

A review of aerothermal problems associated with hypersonic flight

A review is presented of some important aerothermal problems associated with hypersonic flight with emphasis on those involved with viscous/inviscid interaction. The flow regimes of importance to hypersonic vehicles of current interest are discussed and the performance of experimental facilities currently available to study real gas phenomena associated with hypervelocity flight are briefly reviewed. Viscous interaction and real gas effects in hypervelocity flight at high altitudes are discussed with reference to measurements which are required to support the development of improved prediction capabilities in this regime. Theoretical and experimental research on 2D and 3D shock wave/laminar boundary layer interaction relevant to the performance of control surfaces and inlets in hypersonic flight at high altitudes is reviewed. The characteristics of transition regions in hypersonic flows are discussed with particular reference to transitional flows over nosetips and swept leading edges. Studies of shock interaction phenomena on indented nosetips are discussed, followed by a review of the surface roughness and blowing effects. Research to describe the characteristics of 2D and 3D regions of shock wave/turbulent boundary layer interaction in hypersonic flow is reviewed with particular reference to intrinsic unsteadiness and potential compressibility effects in these flows. This review is concluded with a brief discussion of observations suggesting a decrease in the spreading rate in shear layer mixing in hypersonic flow.

Holden, M. S.↗
NASA NTRSDate not supplied

Numerical Behaviour of a Smooth Local Correlation-based Transition Model in a Newton-Krylov Flow Solver

The numerical behaviour of transport-equation-based transition models, including both iterative and grid convergence, is influenced by the source terms. Transition models contain source terms that are large and highly nonlinear, and can be destabilizing in a strong implicit solver. Linearization strategies with varying levels of coupling are evaluated in conjunction with a source-term time step restriction to determine best-practices for solving the SA-sLM2015smooth local correlation-based transition model in an implicit Newton-Krylov flow solver. Achieving deep iterative convergence facilitates a detailed investigation of the grid convergence of these free-transition simulations, which are evaluated relative to fully-turbulent simulations performed using the Spalart-Allmaras turbulence model. Simulations of the NLF0416 general aviation airfoil, VA-2 supercritical airfoil, and NASA CRM-NLF wing-body geometry are performed over a range of grid levels. The results demonstrate that both a fully-coupled linearization strategy and a source-term time step restriction improve nonlinear convergence as the complexity of the free-transition simulations increases. In general, additional grid resolution is required for free-transition simulations relative to fully-turbulent simulations in order to achieve a similar level of accuracy, with the grid convergence of free-transition simulations sensitive to the streamwise grid spacings in the transition regions.

AATT↗
NASA NTRS1952

Transition caused by the laminar flow separation

An experimental investigation of the effects of the geometry of body surface, Reynolds number, stream turbulence, and a roughness element (wire) on the reattachment of separated laminar boundary-layer flow on a bent flat plate is presented and discussed. The flow mechanisms determining reattachment of the boundary layer are analyzed and discussed.

BOUNDARY LAYER CHARACTERISTICS - WING SECTIONS↗
NASA NTRS1992

Numerical investigations in the backflow region of a vacuum plume

The objective of this research is to numerically simulate the vacuum plume flow field in the backflow region of a low thrust nozzle exit. In space applications, the low thrust nozzles are used as a propulsion device to control the vehicle attitude, or to maneuver the vehicle flight trajectory. When the spacecraft is deployed in the orbit or cruising in a planetary mission, the vacuum plume is created behind the nozzle exit (so called backflow region), by the exhausting gas of the propulsion system or by venting internal gas to the extremely low density ambient. The low density vacuum plume flow regions cover the continuum, transitional and free molecular flow regimes, which were characterized by the Knudsen number K(sub n), K(sub n) = lambda(sub m)/L where lambda(sub m) is the mean free path of the gas molecules and L is the characteristic length of the flow field. The transitional regime is defined by 0.01 is less than or equal to K(sub n) is less than or equal to 10. The conventional Navier-Stokes equations are valid only in the flow region close to the nozzle exit since the validity of the Navier-Stokes equations fails asymptotically as the Knudsen number increases. The vacuum plume characteristics prediction is primarily a problem of transitional aerodynamics.

Liaw, Goang-Shin↗
DOE OSTI2024

Redesigning large-scale multimodal transit networks with shared autonomous mobility services

Here, this study addresses a large-scale multimodal transit network design problem, with Shared Autonomous Mobility Services (SAMS) as both transit feeders and an origin-to-destination mode. The framework captures spatial demand and modal characteristics, considers intermodal transfers and express services, determines transit infrastructure investment and path flows, and generates transit routes. A system-optimal multimodal transit network is designed with minimum total door-to-door generalized costs of users and operators, satisfying transit origin-destination demand within a pre-set infrastructure budget. Firstly, the geography, demand, and modes in each zone are characterized with continuous approximation. The decisions of network link investment and multimodal path flows in zonal connection optimization are formulated as a minimum-cost multi-commodity network flow (MCNF) problem and solved efficiently with a mixed-integer linear programming (MILP) solver. Subsequently, the route generation problem is solved by expanding the MCNF formulation to minimize intramodal transfers. The model is illustrated through a set of experiments with the Chicago network comprised of 50 zones and seven modes, under three scenarios. The computational results present savings in traveler journey time and operator cost demonstrating the potential benefits of collaboration between multimodal transit systems and SAMS.

Autonomous vehicles↗
NASA NTRS2023

Experimental Investigation of Distributed Sand-Grain Roughness Effects on Transition Onset and Turbulent Heating at Mach 6

An experimental investigation of distributed sand-grain surface roughness effects on hypersonic boundary-layer transition and turbulent heating has been performed. Two representative entry vehicle geometries, a sphere-cone aeroshell and a spherical-cap aeroshell, were considered. Cast ceramic models of each geometry were fabricated with distributed sand-grain roughness patterns of different heights that simulated an ablated thermal protection system. Wind tunnel testing was performed at Mach 6 over a range of Reynolds numbers sufficient to produce laminar, transitional, and turbulent flow. Aeroheating and boundary-layer transition onset data were obtained using global phosphor thermography. The experimental heating data are presented herein, as are comparisons to laminar and turbulent smooth-wall heat transfer distributions from computational flow field simulations. The boundary-layer transition data were found to correlate with a functional representation developed in prior roughness studies, although the data scatter was greater owing to the height variability of distributed sand-grain roughness.

Brian R Hollis↗
NASA NTRS1983

Multiple buoyancy driven flows in a vertical cylinder heated from below

The structure of axisymmetric buoyancy-driven convection in a vertical cylinder heated from below is probed by finite element solution of the Boussinesq equations coupled with computed-implemented perturbation techniques for detecting and tracking multiple flows and for determining flow stability. Results are reported for fluids with Prandtl number of one and for cylinders with aspect ratio (Lambda) (defined as the height to radius of the cylinder) between 0.5 and 2.25. Extensive calculations of the neutral stability curve for the static solution and of the nonlinear motions along the bifurcating flow families show a continuous evolution of the primary cellular motion from a single toroidal cell to two and three cells nested radially in the cylinder, instead of the sharp transitions found for a cylinder with shear-free sidewalls. The smooth transitions in flow structure with Rayleigh number and lambda are explained by nonlinear connectivity between the first two bifurcating flow families formed either by a secondary bifurcation point for Lambda or = Lambda * approximately 0.80 or by a limit point for Lambda Lambda *. The transition between these two modes may be described by the theory of multiple limit point bifurcation.

Yamaguchi, Y.↗
DOE OSTI2023

Characterization of local parameters of inclined upward air–water bubbly two-phase flows in a round pipe

The present work seeks to develop a detailed experimental database and characterize the local effects of inclination on horizontal and upward bubbly air–water two-phase flows. Experimental conditions are selected to investigate bubbly flows at a variety of orientations while reducing the influence of flow regime transition. Detailed time-averaged data is collected using state-of-the-art four-sensor conductivity probes for measurements across the flow area for five flow conditions at five inclination orientations in a 25.4 mm inner diameter pipe. Using the newly established database, effects of inclination on bubbly flows are analyzed, as are changes in liquid and gas flow rate at different orientations. The observations include (1) bubble migration and agglomeration at the top pipe wall as orientation changes from vertical to horizontal; (2) reducing the angle from vertical reduces the local gas velocity, and correspondingly reduces the global slip from greater than unity at 90° to less than unity for 60° and lower; (3) changes in the bubble size distribution are primarily at the interface between the bubble cluster and the liquid region of the pipe, not coalescence within the bubble cluster. In conclusion, physical mechanisms for these observations are proposed, and the present trends at different orientations support previous experiments in horizontal two-phase flows.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Integrating a Water Tracer Model Into WRF‐Hydro for Characterizing the Effect of Lateral Flow in Hydrologic Simulations

Abstract Most current land models approximate terrestrial hydrological processes as one‐dimensional vertical flow, neglecting lateral water movement from ridges to valleys. Such lateral flow is fundamental at catchment scales and becomes crucial for finer‐scale land models. To test the effect of incorporating lateral flow toward three‐dimensional representations of hydrological processes in the next generation land models, we integrate a water tracer model into the WRF‐Hydro framework to track water movement from precipitation to discharge and evapotranspiration. This hydrologic‐tracer integrated system allows us to identify the key mechanisms by which lateral flow affects the flow paths and transit times in WRF‐Hydro. By comparing modeling experiments with and without lateral routing in two contrasting catchments, we determine the impacts of lateral flow on the transit times of precipitation event‐water. Results show that with limited hydrologic connectivity, lateral flow extends the transit times by reducing (increasing) event‐water drainage loss (accumulation) in ridges (valleys) and allowing reinfiltration of infiltration‐excess flow, which is missing in most land models. On the contrary with high hydrologic connectivity, lateral flow can effectively accelerate the water release to streams and reduce the transit time. However, the transit times are substantially underestimated by the model compared with isotope‐derived estimates, indicating model limitations in representing flow paths and transit times. This study provides some insights on the fundamental differences in terrestrial hydrology simulated by land models with and without lateral flow representation.

54 ENVIRONMENTAL SCIENCES↗