Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Topological phases”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Influence of Ti‐incorporated Zeolite Topology and Pore Condensation on Vapor Phase Propylene Epoxidation Kinetics with Gaseous H 2 O 2

Abstract Vapor‐phase propylene (C 3 H 6 ) epoxidation kinetics with hydrogen peroxide (H 2 O 2 ) strongly reflects the physical properties of Ti‐incorporated zeolite catalysts and the presence of spectating molecules (“solvent”) near active sites even without a bulk liquid phase. Steady‐state turnover rates of C 3 H 6 epoxidation and product selectivities vary by orders of magnitudes, depending on the zeolite silanol ((SiOH) x ) density, pore topology (MFI, *BEA, FAU), and the quantity of condensed acetonitrile (CH 3 CN) molecules nearby active sites, under identical reaction mechanisms sharing activated H 2 O 2 intermediates on Ti surfaces. Individual kinetic analyses for propylene oxide (PO) ring‐opening, homogeneous diol oxidative cleavage, and homogeneous aldehyde oxidation reveal that secondary reaction kinetics following C 3 H 6 epoxidation responds more sensitively to the changes in zeolite physical properties and pore condensation with CH 3 CN. Thus, higher PO selectivities achieved in hydrophilic Ti‐MFI at steady‐state reflect the preferential stabilization of transition states for C 3 H 6 epoxidation (a primary reaction) relative to PO ring‐opening and oxidative cleavage (secondary reactions) that solvation effects that reflect interactions among condensed CH 3 CN within pores and the extended pore structure.

Kwon, Ohsung↗
DOE OSTI2026

Topological shaping of vortex neutron beams using forked phase gratings

Beams of light or matter that carry well-defined states of orbital angular momentum (OAM) are promising probes of topological and textured condensed matter systems such as magnetic skyrmions. Using spin-echo small-angle neutron scattering, a phase-sensitive technique that allows for a relatively low intensity beam, we demonstrate the production of vortex neutron beams from forked phase gratings of various topological charges. This type of interferometric verification of OAM we present here could be further extended to other platforms using probes that are similarly limited by the coherence and strength of the currently available sources.

Cold atoms & matter waves↗
DOE OSTI2024

Influence of Ti‐incorporated Zeolite Topology and Pore Condensation on Vapor Phase Propylene Epoxidation Kinetics with Gaseous H 2 O 2

Vapor-phase propylene (C 3 H 6 ) epoxidation kinetics with hydrogen peroxide (H 2 O 2 ) strongly reflects the physical properties of Ti-incorporated zeolite catalysts and the presence of spectating molecules (“solvent”) near active sites even without a bulk liquid phase. Steady-state turnover rates of C 3 H 6 epoxidation and product selectivities vary by orders of magnitudes, depending on the zeolite silanol ((SiOH) x ) density, pore topology (MFI, *BEA, FAU), and the quantity of condensed acetonitrile (CH 3 CN) molecules nearby active sites, under identical reaction mechanisms sharing activated H 2 O 2 intermediates on Ti surfaces. Individual kinetic analyses for propylene oxide (PO) ring-opening, homogeneous diol oxidative cleavage, and homogeneous aldehyde oxidation reveal that secondary reaction kinetics following C 3 H 6 epoxidation responds more sensitively to the changes in zeolite physical properties and pore condensation with CH 3 CN. Thus, higher PO selectivities achieved in hydrophilic Ti-MFI at steady-state reflect the preferential stabilization of transition states for C 3 H 6 epoxidation (a primary reaction) relative to PO ring-opening and oxidative cleavage (secondary reactions) that solvation effects that reflect interactions among condensed CH 3 CN within pores and the extended pore structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Various Low-Symmetry Phases in High- χ and Conformationally Asymmetric PDMS- b -PTFEA Copolymers

Since the discovery of the Frank–Kasper (FK) phase a decade ago, single-component block copolymer systems have offered unique opportunities to explore the structural and phase-transition properties of topologically close-packed FK phases composed of point-particle motifs. Here, we present the formation of complex low-symmetry phases and their thermodynamic stability using high-χ and high-ε linear diblock copolymers, where χ and ε are the Flory–Huggins interaction parameter and conformational asymmetry between the two blocks, respectively. In this work, a series of polydimethylsiloxane-b-poly(2,2,2-trifluoroethyl acrylate) (PDMS-b-PTFEA) copolymers are prepared by tuning the volume fraction ($f_{\text{PTFEA}}$) of a minor PTFEA block. The packing structures of PDMS-b-PTFEAs are mapped in the space of temperature versus $f_{\text{PTFEA}}$ using X-ray scattering measurements. In addition to the packing structures reported earlier, we identify another A15 phase at higher $f_{\text{PTFEA}}$ close to a hexagonally packed cylinder (HEX) phase and establish the phase sequence of HEX–A15–σ–C14–BCC with decreasing $f_{\text{PTFEA}}$. Theoretical calculation of relative free-energy densities confirms the experimental phase sequence of the composition-dependent sphere-packing structures. Interestingly, the domain sizes of three-dimensional (3D) sphere-packing structures are nearly temperature-invariant compared to that of a two-dimensional HEX structure, and we attribute this dimensional stability to the strong enthalpic effects in the formation of 3D packing structures and the geometrical characteristics of spherical domains. Our results demonstrate that the interaction parameter χ, together with the known role of conformational asymmetry ε, serves as the primary thermodynamic parameter for selecting and stabilizing various low-symmetry packing structures in sphere-forming linear diblock copolymer systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Complex magnetic phases in the polar tetragonal intermetallic NdCoGe 3

Polar materials can host a variety of topologically significant magnetic phases, which often emerge from a modulated magnetic ground state. Relatively few noncentrosymmetric tetragonal materials have been shown to host topological spin textures and new candidate materials are necessary to expand the current theoretical models. This manuscript reports on the anisotropic magnetism in the polar, tetragonal material NdCoGe 3 via thermodynamic and neutron diffraction measurements. The previously reported H - T phase diagram is updated to include several additional phases, which exist for both H = 0 and with an applied field H ⊥ c . Neutron diffraction data reveal that the magnetic structures below T N 1 = 3.70 K and T N 2 = 3.50 K are incommensurate, with a ground-state magnetic order that is incommensurate in all directions with the propagation vector $\vec{k}$ = (0.494, 0.0044, 0.385) at 1.8 K. A unique magnetic structure solution is not achievable, but the possible single-$\vec{k}$ and $\vec{k}$ spin models are discussed. These results demonstrate that NdCoGe 3 hosts complicated magnetic order derived from modulated magnetic moments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Promotion of superconductivity in magic-angle graphene multilayers

Graphene moiré superlattices show an abundance of correlated insulating, topological, and superconducting phases. Whereas the origins of strong correlations and nontrivial topology can be directly linked to flat bands, the nature of superconductivity remains enigmatic. We demonstrate that magic-angle devices made of twisted tri-, quadri-, and pentalayer graphene placed on monolayer tungsten diselenide exhibit flavor polarization and superconductivity. We also observe insulating states in the tril- and quadrilayer arising at finite electric displacement fields. As the number of layers increases, superconductivity emerges over an enhanced filling-factor range, and in the pentalayer it extends well beyond the filling of four electrons per moiré unit cell. Our results highlight the role of the interplay between flat and more dispersive bands in extending superconducting regions in graphene moiré superlattices.

Science & Technology - Other Topics↗
NASA NTRS2006

Phase Stability of a Powder Metallurgy Disk Superalloy

Advanced powder metallurgy superalloy disks in aerospace turbine engines now entering service can be exposed to temperatures approaching 700 C, higher than those previously encountered. They also have higher levels of refractory elements, which can increase mechanical properties at these temperatures but can also encourage phase instabilities during service. Microstructural changes including precipitation of topological close pack phase precipitation and coarsening of existing gamma' precipitates can be slow at these temperatures, yet potentially significant for anticipated disk service times exceeding 1,000 h. The ability to quantify and predict such potential phase instabilities and degradation of capabilities is needed to insure structural integrity and air worthiness of propulsion systems over the full life cycle. A prototypical advanced disk superalloy was subjected to high temperature exposures, and then evaluated. Microstructural changes and corresponding changes in mechanical properties were quantified. The results will be compared to predictions of microstructure modeling software.

Gabb, Timothy P.↗
DOE OSTI2023

Emergent topological quantum orbits in the charge density wave phase of kagome metal CsV 3 Sb 5

The recently discovered kagome materials AV 3 Sb 5 (A = K, Rb, Cs) attract intense research interest in intertwined topology, superconductivity, and charge density waves (CDW). Although the in-plane 2 × 2 CDW is well studied, its out-of-plane structural correlation with the Fermi surface properties is less understood. In this work, we advance the theoretical description of quantum oscillations and investigate the Fermi surface properties in the three-dimensional CDW phase of CsV 3 Sb 5 . We derived Fermi-energy-resolved and layer-resolved quantum orbits that agree quantitatively with recent experiments in the fundamental frequency, cyclotron mass, and topology. We reveal a complex Dirac nodal network that would lead to a π Berry phase of a quantum orbit in the spinless case. However, the phase shift of topological quantum orbits is contributed by the orbital moment and Zeeman effect besides the Berry phase in the presence of spin-orbital coupling (SOC). Therefore, we can observe topological quantum orbits with a π phase shift in otherwise trivial orbits without SOC, contrary to common perception. Our work reveals the rich topological nature of kagome materials and paves a path to resolve different topological origins of quantum orbits.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Two-atom-thin topological crystalline insulators lacking out of plane inversion symmetry

A two-dimensional topological crystalline insulator (TCI) with a single unit cell (u.c.) thickness is demonstrated here. To that end, one first shows that tetragonal (C 4 in-plane) symmetry is not a necessary condition for the creation of zero-energy metallic surface states on TCI slabs of finite-thicknesses, because zero-energy states persist even as all the in-plane rotational symmetries—furnishing topological protection—are completely removed. In other words, zero-energy levels on the model are not due to (nor are they protected by) topology. Furthermore, effective two-fold energy degeneracies taking place at few discrete k-points away from zero energy in the bulk Hamiltonian—that are topologically protected—persist at the u.c. thickness limit. Here, the chiral nature of the bulk TCI Hamiltonian permits creating a $2\times 2$ square Hamiltonian, whose topological properties remarkably hold invariant at both the bulk and at the single u.c. thickness limits. The identical topological characterization for bulk and u.c.-thick phases is further guaranteed by a calculation involving Pfaffians. This way, a two-atom-thick TCI is deployed hereby, in a demonstration of a topological phase that holds both in the bulk, and in two dimensions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Topological order in interacting semimetals

It has recently been demonstrated that it is possible to open a gap in a magnetic Weyl semimetal, while preserving the chiral anomaly along with the charge conservation and translational symmetries, which all protect the gapless nodes in a weakly interacting semimetal. The resulting state was shown to be a nontrivial generalization of a non-Abelian fractional quantum Hall liquid to three dimensions. Here we point out that a second fractional quantum Hall state exists in this case. This state has exactly the same electrical and thermal Hall responses as the first, but a distinct (fracton) topological order. Moreover, the existence of this second fractional quantum Hall state necessarily implies a gapless phase, which has identical topological response to a noninteracting Weyl semimetal, but is distinct from it. Here, this may be viewed as a generalization (in a weaker form) of the known duality between a noninteracting two-dimensional Dirac fermion and QED 3 to 3+1 dimensions. In addition we discuss a (3+1)-dimensional topologically ordered state, obtained by gapping a nodal line semimetal without breaking symmetries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Phase transitions of correlations in black hole geometries

We study the holographic realization of optimized correlation measures—measures of quantum correlation that generalize elementary entropic formulas—in two-dimensional thermal states dual to spacetimes with a black hole horizon. We consider the symmetric bipartite optimized correlation measures: the entanglement of purification, Q-correlation, R-correlation, and squashed entanglement, as well as the mutual information, a nonoptimized correlation measure, and identify the bulk surface configurations realizing their geometric duals over the parameter space of boundary region sizes and the black hole radius. This parameter space is divided into phases associated with given topologies for these bulk surface configurations, and first-order phase transitions occur as a new topology of bulk surfaces becomes preferred. The distinct phases can be associated with different degrees of correlation between the boundary regions and the thermal environment. The Q-correlation has the richest behavior, with a structure of nested optimizations leading to two topologically distinct bulk surface configurations being equally valid as geometric duals at generic points in the phase diagram.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Aspects of symmetry and topology in the charge density wave phase of 1T–TiSe 2

Abstract The charge density wave (CDW) in 1 T –TiSe 2 harbors a nontrivial symmetry configuration. It is important to understand this underlying symmetry both for gaining a handle on the mechanism of CDW formation and for probing the CDW experimentally. Here, based on first-principles computations within the framework of the density functional theory, we unravel the connection between the symmetries of the normal and CDW states and the electronic structure of 1 T –TiSe 2 . Our analysis highlights the key role of irreducible representations of the electronic states and the occurrence of band gaps in the system in driving the CDW. By showing how symmetry-related topology can be obtained directly from the electronic structure, our study provides a practical pathway in search of topological CDW insulators.

Physics↗
DOE OSTI2022

Pressure-induced concomitant topological and metal-insulator quantum phase transitions in Ce3Pd3Bi4

Abstract The electronic property and magnetic susceptibility of Ce 3 Pd 3 Bi 4 were systemically investigated from 18 to 290 K for varying values of cell volume using dynamic mean-field theory coupled with density functional theory. By extrapolating to zero temperature, the ground state of Ce 3 Pd 3 Bi 4 at ambient pressure is found to be a correlated semimetal due to insufficient hybridization. Upon applying pressure, the hybridization strength increases and a crossover to the Kondo insulator is observed at finite temperatures. The characteristic temperature signaling the formation of Kondo singlet, as well as the characteristic temperature associated with f -electron delocalization–localization change, simultaneously vanishes around a critical volume of 0.992 V 0 , suggesting that such metal–insulator transition is possibly associated with a quantum critical point. Finally, Wilson’s loop calculations indicate that the Kondo insulating side is topologically trivial, thus a topological transition also occurs across the quantum critical point.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Emergent Ergodicity at the Transition between Many-Body Localized Phases

Strongly disordered systems in the many-body localized (MBL) phase can exhibit ground state order in highly excited eigenstates. The interplay between localization, symmetry, and topology has led to the characterization of a broad landscape of MBL phases ranging from spin glasses and time crystals to symmetry protected topological phases. Understanding the nature of phase transitions between these different forms of eigenstate order remains an essential open question. In this work, we conjecture that no direct transition between distinct MBL orders can occur in one dimension; rather, an ergodic phase always intervenes. Motivated by recent advances in Rydberg-atom-based quantum simulation, we propose an experimental protocol where the intervening ergodic phase can be diagnosed via the dynamics of local observables.

1-dimensional spin chains↗
DOE OSTI2023

Isolated Single-stage Three-phase AC/DC Converter using Bidirectional Switches

The advent of the SiC Bidirectional FET (BiDFET), a monolithic 1.2 kV bidirectional switch, has rendered the single-stage three-phase AC/DC converter topology a promising approach for implementing AC/DC converters. This topology, which integrates a full-bridge converter with a single-phase to three-phase matrix converter via a high-frequency transformer, is particularly suitable for applications requiring galvanic isolation, buck-boost functionality, and bidirectional power flow. The single-stage design eliminates the need for bulky and unreliable electrolytic capacitors, and utilizes a single magnetic component for power transfer. In the matrix converter, bidirectional switches, which were traditionally implemented using combinations of multiple semiconductor devices such as MOSFETs, IGBTs, and diodes, can now be realized using the single-chip solution, BiDFET. This advancement leads to a lower switch count, compact converter implementation, with lower inductance commutation cells, thereby enhancing the overall efficiency and compactness of the system. The paper presents a unified model of the converter, considering all control parameters, including the duty cycles and phase shift of transformer voltages. Detailed expressions for power transfer, transformer currents, and currents at AC and DC ports are provided. Additionally, the paper outlines the conditions necessary for soft-switching of all switches and the commutation schemes required for the practical implementation of the matrix converter modulation scheme. A hardware prototype of a 10 kW, 480 VRMS, LL/ 800 V AC/DC system has been developed, and experimental results are presented to demonstrate its performance.

BiDFET↗
NASA NTRS1990

High power density dc/dc converter: Selection of converter topology

The work involved in the identification and selection of a suitable converter topology is described. Three new dc/dc converter topologies are proposed: Phase-Shifted Single Active Bridge DC/DC Converter; Single Phase Dual Active Bridges DC/DC Converter; and Three Phase Dual Active Bridges DC/DC Converter (Topology C). The salient features of these topologies are: (1) All are minimal in structure, i.e., each consists of an input and output bridge, input and output filter and a transformer, all components essential for a high power dc/dc conversion process; (2) All devices of both the bridges can operate under near zero-voltage conditions, making possible a reduction of device switching losses and hence, an increase in switching frequency; (3) All circuits operate at a constant frequency, thus simplifying the task of the magnetic and filter elements; (4) Since, the leakage inductance of the transformer is used as the main current transfer element, problems associated with the diode reverse recovery are eliminated. Also, this mode of operation allows easy paralleling of multiple modules for extending the power capacity of the system; (5) All circuits are least sensitive to parasitic impedances, infact the parasitics are efficently utilized; and (6) The soft switching transitions, result in low electromagnetic interference. A detailed analysis of each topology was carried out. Based on the analysis, the various device and component ratings for each topology operating at an optimum point, and under the given specifications, are tabulated and discussed.

Divan, Deepakraj M.↗
DOE OSTI2021

Influence of heterocyclic N-donors on the structural topologies and vibrational spectra of uranyl selenate phases

Uranyl (U(VI)O 2 2+ ) selenate compounds represent a well-studied family of structures with diverse structural arrays. Differences in the overall topology and bonding with the uranyl cation combined with additional intermolecular interactions can lead to variation in the resulting spectroscopic signals. Here, in the current study, we evaluated the structural chemistry and vibrational spectroscopy for uranyl selenates crystallized with heterocyclic N-donors. Five compounds ((C 4 H 12 N 2 )[(UO 2 )(SeO 4 ) 2 (H 2 O)]·H 2 O (USe_pip), (C 4 H 5 N 2 ) 2 [(UO 2 )(SeO 4 ) 2 (H 2 O)] (USe_pyrdz), (C 5 H 5 N) 2 [(UO 2 ) 2 (SeO 4 ) 3 (H 2 O)] ∙ 3H 2 O (USe_pyrmd), (H 3 O) 2 (C 4 H 5 N 2 ) 2 [(UO 2 ) 3 (SeO 4 ) 5 (H 2 O)]·H 2 O (USe_pyrz), and (C 5 H 6 N) 2 [(UO 2 ) 2 (SeO 4 ) 3 (H 2 O)] ∙ 3H 2 O (USe_pyr)) were characterized using X-ray diffraction (single-crystal and powder) and vibrational (Raman and IR) spectroscopy. Two one-dimensional (1-D) chain and three two-dimensional sheet (2-D) topologies were identified and classified based upon previous graphical representations. Overall, the arrangement of the heteroatoms could be linked to the hydrogen bonding network associated with the heterocycles and selenate anions. Vibrational spectra of the solid-state compounds were complex, with multiple bands associated with the uranyl cation, selenate anion, and heteroatoms. The ν 1 symmetric stretching band of the uranyl was relatively consistent across all compounds, whereas differences were observed for the ν 3 asymmetric band between the 1-D and 2-D structural topologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗