Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Thermal Source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Spatial structure of high energy photon sources in solar flares

Stereoscopic observations of high energy (greater than about 100 keV) photon emission from five solar flares have been made with the X-ray spectrometers aboard the ISEE-3 and Pioneer Venus Orbiter spacecraft. The observed altitude structure of the photon source and its dependence on the photon energy and time during a flare are compared with the predictions of thermal and non-thermal models of the hard X-ray source. In the case of the impulsive source, it is found that (1) the thermal model with adiabatic compression and expansion of a magnetically confined plasma and the thin target (non-thermal) model are not consistent with the observations; (2) the thick target (non-thermal) model and the dissipative thermal model are partially in agreement with the observations; (3) the emission probably originates in many individual non-thermal sources distributed in altitude, the lower altitude sources being brighter than those at higher altitude. In the case of the gradual source, it is found that (1) models with purely coronal sources are not consistent with the observations; (2) a partial precipitation model with trapped as well as precipitating electrons is consistent with the observations.

Kane, S. R.↗

Thermal analysis of calcium sulfate dihydrate sources used to manufacture gypsum wallboard

Gypsum wallboard has been used for over 100 years as a barrier to the spread of fire in residential and commercial structures. The gypsum molecule, CaSO 4 ·2H 2 O, provides two crystalline waters that are released upon heating providing an endothermic effect. Manufacturers have recognized that the source of the gypsum ore is a factor that affects all aspects of its performance; thus, it is hypothesized that the impurities present in the gypsum ore are the causes of the performance differences. Differential Thermal Analysis/Thermogravimetric Analysis (DTA/TGA) and X-ray Diffraction (XRD) were used in this paper to compare and characterize samples of gypsum ore representing sources of natural, synthetic from a Flue Gas Desulfurization process (FGD) and blends thereof. The hemihydrate phase of representative natural, FGD, and reagent grade calcium sulfate were rehydrated with distilled water and evaluated by DTA/TGA. Analysis of the data shows distinct areas of similarity separated by the conversion to anhydrite ~250 °C. Compositional reconstructions based on DTA/TGA and XRD data were compared and although, the results were comparable, the DTA/TGA suggests thermally active compounds that were not detected by XRD. Anhydrite, silica and halite were reported by XRD but were not thermally reactive in the temperature range evaluated by DTA/TGA (ambient to 1050 °C). Finally, the presence of carbonate compounds (e.g., calcite and dolomite) were indicated by XRD and estimated from the thermal decomposition reaction ~700 °C.

36 MATERIALS SCIENCE↗

The effects of mass flow on the temperature and abundance structure of the solar transition region

The density and temperature structure of a multicomponent plasma consisting of electrons, protons, ionized helium, and a trace minor ion species are computed. The equations of force and energy balance for this model are developed and solved. It is found that in the case of downflows the minor ion temperature can be significantly hotter than the electron temperature, and significant abundance enhancements are possible due to the slowdown of the minor species from the effect of the thermal force. A simple physical picture of the source of the thermal force is given.

Woods, D. T.↗

Combined Thermal-Water Microgrid Model

SAND2022-3874 O The Combined Thermal-Water Microgrid Model is a set of three models combined with controls algorithms for a Water Thermal Storage (WTS), Ground Source Heat Pump (GSHP), and Thermal Bridge Loop (TBL) that serves a residential neighborhood. The model allows a parametric investigation of volume of water storage versus number of ground heat exchanger bore-holes versus seasonal energy efficiency measures. The code is being released as open source so that the entire study can be replicated per an open access journal publication. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Villa, Daniel↗

Comparative Analysis of Thermal Conversion Technologies for Deep Space Missions

Radioisotope power systems (RPS) utilizing Plutonium-238 as a heat source for thermal-to-electric energy conversion have been used as a reliable power source for NASA’s deep space missions for sixty years. Recent innovations and improvements to thermal energy technologies show potential increases to radioisotope system efficiencies from current measurements of ~5-7% to efficiencies upwards of 20%. This report surveys and ranks recent, innovative thermal-to-electric energy conversion research technologies. Technologies being developed at universities and industry are compared with respect to thermal conversion method and relevant key performance parameters. Key performance parameters are identified as system specific power per kg, efficiency, power output, technology readiness level, and system mass. Analytical Hierarchy Process (AHP) was utilized to create weighted values for each evaluation criterion. The AHP tables combined with decision matrices create table scores for past, present, and potential future systems. The table score was combined with a conversion method score in an adjustable system to add value to flight-proven or well-tested thermal conversion technologies such as thermoelectrics. While the three highest-ranking systems reviewed are currently being developed by NASA’s RPS Program, the additional highest-ranking systems not under-development by RPS could warrant further research.

Radioisotope Power System↗

Model and H{sub {infinity}} Controller for a Distributed Parameter System

This paper presents a mathematical model of inductor electromagnetic and heating processes. There is introduced a controller as well, designed to provide a uniform heating supply. The mathematical model is used for a coupled electromagnetic-thermal analysis, since the electromagnetic analysis calculates the density of the heating source and the thermal analysis, that follows, utilizes the obtained heating source density to calculate a bounded heat transfer problem. The finite element method (FEM or FE method) is applied to reduce the problem to a linear system of ODEs and then, by the use of the control theory and the Glover-Doyle algorithm, it is demonstrated how to design a controller to establish a min temperature gradient change in the radial direction (a uniform heating mode). It is well-known that processes, such as the semi-solid forming and hot casting, require the max achievable uniform heating for a min period of time.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Method and Apparatus for the Portable Identification of Material Thickness and Defects Using Spatially Controlled Heat Application

A method and a portable apparatus for the nondestructive identification of defects in structures. The apparatus comprises a heat source and a thermal imager that move at a constant speed past a test surface of a structure. The thermal imager is off set at a predetermined distance from the heat source. The heat source induces a constant surface temperature. The imager follows the heat source and produces a video image of the thermal characteristics of the test surface. Material defects produce deviations from the constant surface temperature that move at the inverse of the constant speed. Thermal noise produces deviations that move at random speed. Computer averaging of the digitized thermal image data with respect to the constant speed minimizes noise and improves the signal of valid defects. The motion of thermographic equipment coupled with the high signal to noise ratio render it suitable for portable, on site analysis.

Cramer, K. Elliott↗

Thermal load leveling during silicon crystal growth from a melt using anisotropic materials

An apparatus for growing a silicon crystal substrate comprising a heat source, an anisotropic thermal load leveling component, a crucible, and a cold plate component is disclosed. The anisotropic thermal load leveling component possesses a high thermal conductivity and may be positioned atop the heat source to be operative to even-out temperature and heat flux variations emanating from the heat source. The crucible may be operative to contain molten silicon in which the top surface of the molten silicon may be defined as a growth interface. The crucible may be substantially surrounded by the anisotropic thermal load leveling component. The cold plate component may be positioned above the crucible to be operative with the anisotropic thermal load leveling component and heat source to maintain a uniform heat flux at the growth surface of the molten silicon.

36 MATERIALS SCIENCE↗

THE X-RAY SPECTRA OF THE LUMINOUS LMXBs IN NGC 3379: FIELD AND GLOBULAR CLUSTER SOURCES

From a deep multi-epoch Chandra observation of the elliptical galaxy NGC 3379 we report the spectral properties of eight luminous LMXBs (L{sub X} >1.2 x 10{sup 38} erg s{sup -1}). We also present a set of spectral simulations, produced to aid the interpretation of low-count single-component spectral modeling. These simulations demonstrate that it is possible to infer the spectral states of X-ray binaries from these simple models and thereby constrain the properties of the source. Of the eight LMXBs studied, three reside within globular clusters (GCs) and one is a confirmed field source. Due to the nature of the luminosity cut, all sources are either neutron star (NS) binaries emitting at or above the Eddington luminosity or black hole (BH) binaries. The spectra from these sources are well described by single-component models, with parameters consistent with Galactic LMXB observations, where hard-state sources have a range in photon index of 1.5-1.9 and thermally dominant (TD) sources have inner-disk temperatures between {approx}0.7and1.55 keV. The large variability observed in the brightest GC source (L{sub X} >4 x 10{sup 38} erg s{sup -1}) suggests the presence of a BH binary. At its most luminous this source is observed in a TD state with kT{sub in} = 1.5 keV, consistent with a BH mass of {approx}4 M{sub sun}. This observation provides further evidence that GCs are able to retain such massive binaries. We also observed a source transitioning from a bright state (L{sub X} {approx}1 x 10{sup 39} erg s{sup -1}), with prominent thermal and non-thermal components, to a less luminous hard state (L{sub X} = 3.8 x 10{sup 38} erg s{sup -1}, {Gamma}= 1.85). In its high flux emission, this source exhibits a cool-disk component of {approx}0.14 keV, similar to spectra observed in some ultraluminous X-ray sources (ULXs). Such a similarity indicates a possible link between 'normal' stellar-mass BHs in a high accretion state and ULXs.

79 ASTRONOMY AND ASTROPHYSICS↗

Thermal Storage Integrated into Air-Source Heat Pumps to Leverage Building Electrification: A Systematic Literature Review

Air-source heat pumps (ASHPs) can support a decarbonized economy by replacing combustion appliances in homes and electrifying heating systems in buildings. However, ASHPs have not seen significant adoption primarily due to deteriorated performance under cold conditions - at very low temperatures they require auxiliary resistance heating to meet the heating demand and defrost the evaporator. The additional heat lowers the system efficiency. Thermal energy storage (TES) is a candidate technology to help overcome some of these issues. This paper presents a systematic literature review to map the existing research on the integration of TES into ASHPs. Our review of 59 publications indicates that thermal storage increases the ASHP coefficient of performance by 27% on average, albeit with higher initial cost compared to conventional fossil-fueled heating systems. Phase change materials may be ideal to be integrated with ASHPs due to their high energy density and compact design, but only a few publications address TES sizing and design. First and Second Laws of Thermodynamics are widely used to create metrics to assess ASHP-TES integration, and only recently have cost and environmental impact been explored. This literature review suggests that more comprehensive metrics are needed to evaluate the potential benefits of ASHP-TES systems.

air source heat pump↗

Measurement of heat flow through cast slabs of calcium sulfate dihydrate

Slabs of cast calcium sulfate dihydrate have been used for decades as a heat transfer barrier in commercial and residential construction and are assessed in accordance with the parameters defined by ASTM C1396. The study described herein hypothesizes that minor impurities have significant effects on the high–temperature performance of these casts. Five thermocouples are cast into a 20–mm–thick slab at approximately 4–mm intervals are measured between ambient and approximately 1000°C in a furnace. Thermal diffusivity and inertia are estimated from this temperature profile. This study compares natural, flue gas desulfurized (FGD) and reagent grade hemihydrates that have been converted into the dihydrate form with distilled water; the common additives kaolin and borax are used to modify the cast. The thermocouple data allow an effective thermal diffusivity (α') and an effective thermal inertia (I') to be calculated. Furthermore, the hemihydrate source and kaolin content are found to affect the high–temperature performance; the FGD source increases the thermal inertia, and kaolin inhibits the formation of other borate compounds through intercalation.

36 MATERIALS SCIENCE↗

Molecular hydrogen line ratios in four regions of shock-excited gas

Five emission lines of molecular hydrogen, with wavelengths in the ranges of 2.10-2.25 and 3.80-3.85 microns, have been observed in four objects of different type in which the line emission is believed to be excited by shocks. The relative intensities of the lines 1 - 0 S(1):1 - 0 S(O):2 - 1 S(1) are approximately 10.5:2.5:1.0 in all four objects. The 0 - 0 S(13):1 - 0 O(7) line ratio, however, varies from 1.05 in OMC-1 to about 2.3 in the Herbig-Haro object HH 7. The excitation temperature derived from the S(13) and O(7) lines is higher than that derived from the 1 - 0 and 2 - 1 S(1) lines in all four objects, so the shocked gas in these objects cannot be characterized by a single temperature. The constancy of the (1-0)/(2-1) S(1) line ratio between sources suggests that the post-shock gas is 'thermalized' in each source. The S(13)/O(7) ratio is particularly sensitive to the density and temperature conditions in the gas.

Burton, M. G.↗

Energy Model to Evaluate Thermal Energy Storage Integrated with Air Source Heat Pumps: Preprint

Full decarbonization in buildings requires the replacement of combustion appliances with electric ones, and air source heat pumps (ASHP) are a candidate alternative. However, technical limitations, such as the efficiency decrease when operating in cold weather, limit their adoption in the global heating market. Among several options to improve ASHP efficiency operating in colder climates, thermal energy storage (TES) has been considered, as it may provide heating when it is cold and shift ASHP operation to times when the weather is warmer. It may also take advantage of time of use electricity rates and support defrosting when necessary. The evaluation of ASHP-TES systems, however, is still limited because traditional metrics do not capture their full economic and environmental benefits. In this work, a python framework is presented to model the ASHP with and without the presence of TES. Metrics are proposed to analyze the system performance in terms of costs, equivalent CO2 emission, and efficiency metrics to evaluate and compare alternative systems. Model validation against experimental data obtained for a commercial heat pump is provided, as well as an application example using Denver, Colorado, to highlight the model capabilities.

cold climate↗

VLA observations of NGC 247: identification of compact radio sources including three candidate UD H II regions

A high resolution, Very Large Array continuum survey of NGC 247 was undertaken in order to identify compact thermal and nonthermal radio sources, such as supernova remnants (SNRs) and H II regions. NGC 247 was observed at two frequencies, 20 cm and 6 cm, in order to calculate the spectral index, and the survey resulted in the identification of 19 compact radio sources. Using the spectral index to discriminate between source types, we identify two candidate SNRs and one H II region. Three of the radio sources have inverted spectra, indicative of ultradense H II (UD H II) regions, the short-lived, dense cores where massive stars form. Four of the sources are thermal in origin, but were not detected at 20 cm, so they could be H II regions or UD H II regions. The rest of the sources are nonthermal or undetermined. We compare the radio images with Hα, V band, and infrared archive images to look for correspondences that confirm that the sources reside in NGC 247 and are not background sources. We find that over two-thirds of the radio sources have counterparts in the Hα or V band images and are associated with NGC 247. The most luminous radio source in NGC 247 is a candidate SNR, and if confirmed as an SNR, it would be a very luminous extragalactic SNR. The H II regions and UD H II regions are calculated to have ionizing luminosities of between 4-10 × 10{sup 50} s{sup –1}; each individual source would require between 41-100 O7.5V stars to produce the corresponding ionizing luminosity. The ionizing luminosity of the UD H II regions indicates that these UD H II regions represent the lower luminosity population of the known UD H II regions and thus, they may represent a more typical population of UD H II regions that can be found and studied in the nearby galaxies as opposed to more extreme examples that have been found previously.

79 ASTRONOMY AND ASTROPHYSICS↗

Solar Energy Technical Publications Catalog: Solar Thermal Technology

The research and development described in these documents was conducted within the U.S . Department of Energy's (DOE) Solar Thermal Technology Program. The goal of this program is to advance the engineering and scientific understanding of solar thermal technology and to establish the technology base from which private industry can develop solar thermal power production options for introduction into the competitive energy market. Solar thermal technology concentrates the solar flux using tracking mirrors or lenses onto a receiver where the solar energy is absorbed as heat and converted into electricity or incorporated into products as process heat. The two primary solar thermal technologies, central receivers and distributed receivers, employ various point and line-focus optics to concentrate sunlight. Current central receiver systems use fields of heliostats (two-axis tracking mirrors) to focus the sun's radiant energy onto a single, tower- mounted receiver. Point focus concentrators up to 17 meters in diameter track the sun in two axes and use parabolic dish mirrors or Fresnel lenses to focus radiant energy onto a receiver. Troughs and bowls are line-focus tracking reflectors that concentrate sunlight onto receiver tubes along their focal lines. Concentrating collector modules can be used alone or in a multimodule system. The concentrated radiant energy absorbed by the solar thermal receiver is transported to the conversion process by a circulating work fluid. Receiver temperatures range from l00 degrees C in low-temperature troughs to over 1500 degrees C in dish and central receiver systems. The Solar Thermal Technology Program is directing efforts to advance and improve each system concept through solar thermal materials, components, and subsystems research and development and by testing and evaluation. These efforts are carried out with the technical direction of DOE and its network of field laboratories that works with private industry. Together they have established a comprehensive, goal-directed program to improve performance and provide technically proven options for eventual incorporation into the nation's energy supply. To successfully contribute to an adequate energy supply at reasonable cost, solar thermal energy must be economically competitive with a variety of other energy sources. The Solar Thermal Technology Program has developed components and system-level performance targets as quantitative program goals. These targets are used in planning research and development activities, measuring progress, assessing alternative technology options, and developing optimal components. These targets are pursued vigorously to ensure a successful program. This catalog represents part of an effort to provide information on publications about solar thermal research and development activities conducted by DOE's laboratories. Publications listed include technical and research reports and special publications. The following national laboratories are represented in this edition: Sandia National Laboratories, Solar Energy Research Institute, Jet Propulsion Laboratory. This catalog is a product of the DOE Solar Technical Information Program, which is dedicated to providing information to scientific and industrial users in ways most convenient and useful to them. This catalog focuses on solar thermal technologies, and its purpose is to keep the scientific and industrial communities informed of the latest developments in federally sponsored research in this technology.

140000* -- Solar Energy↗

Earth-to-Orbit Rocket Propulsion

The Earth-to-orbit (ETO) phase of access to space is and always will be the first and most critical phase of all space missions. This first phase of all space missions has unique characteristics that have driven space launcher propulsion requirements for more than half a century. For example, the need to overcome the force of the Earth s gravity in combination with high levels of atmospheric drag to achieve the initial orbital velocity; i.e., Earth parking orbit or =9 km/s, will always require high thrust- to-weight (TN) propulsion systems. These are necessary with a T/W ratio greater than one during the ascent phase. The only type of propulsion system that can achieve these high T/W ratios are those that convert thermal energy to kinetic energy. There are only two basic sources of onboard thermal energy: chemical combustion-based systems or nuclear thermal-based systems (fission, fusion, or antimatter). The likelihood of advanced open-cycle, nuclear thermal propulsion being developed for flight readiness or becoming environmentally acceptable during the next century is extremely low. This realization establishes that chemical propulsion for ET0 launchers will be the technology of choice for at least the next century, just as it has been for the last half century of rocket flight into space. The world s space transportation propulsion requirements have evolved through several phases over the history of the space program, as has been necessitated by missions and systems development, technological capabilities available, and the growth and evolution of the utilization of space for economic, security, and science benefit. Current projections for the continuing evolution of requirements and concepts may show how future space transportation system needs could be addressed. The evolution and projections will be described in detail in this manuscript.

Beaurain, Andre↗