Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Te”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

CdSexTe1-x/CdTe Devices with Reduced Interface Recombination Through Novel Back Contacts and Group-V Doping

Since excellent carrier lifetimes and front interface electronic quality are now achieved, rear interface recombination can limit V OC in CdSexTe1-x/CdTe solar cells. Several back-contact structures for devices were fabricated using combinations of tellurium, aluminum oxide, amorphous silicon, and indium tin oxide (ITO). Time-resolved photoluminescence was used to characterize such structures. We show increasingly improved interface passivation through the subsequent use of aluminum oxide, amorphous silicon, and ITO. Additionally, we show that arsenic-doped absorbers form a more passive interface with numerous back contact structures.

aluminum oxide↗
DOE OSTI2021

Measurements of production cross sections of the Higgs boson in the four-lepton final state in proton–proton collisions at $\sqrt{s} = 13\,\text {Te}\text {V} $

Production cross sections of the Higgs boson are measured in the H $\to$ ZZ $\to$ $4\ell$ ($\ell$ $=$ e, $\mu$) decay channel. A data sample of proton-proton collisions at a center-of-mass energy of 13 TeV, collected by the CMS detector at the LHC and corresponding to an integrated luminosity of 137 fb$^{-1}$ is used. The signal strength modifier $\mu$, defined as the ratio of the Higgs boson production rate in the $4\ell$ channel to the standard model (SM) expectation, is measured to be $\mu$ $=$ 0.94 $\pm$ 0.07 (stat) ${}^{+0.09}_{-0.08}$ (syst) at a fixed value of $m_H$ = 125.38 GeV. The signal strength modifiers for the individual Higgs boson production modes are also reported. The inclusive fiducial cross section for the H $\to$ $4\ell$ process is measured to be 2.84 $^{+0.23}_{-0.22}$ (stat) ${}^{+0.26}_{-0.21}$ (syst) fb, which is compatible with the SM prediction of 2.84 $\pm$ 0.15 fb for the same fiducial region. Differential cross sections as a function of the transverse momentum and rapidity of the Higgs boson, the number of associated jets, and the transverse momentum of the leading associated jet are measured. A new set of cross section measurements in mutually exclusive categories targeted to identify production mechanisms and kinematical features of the events is presented. The results are in agreement with the SM predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Search for a heavy vector resonance decaying to a ${\mathrm{Z}}_{\mathrm{}}^{\mathrm{}}$ boson and a Higgs boson in proton-proton collisions at $\sqrt{s} = 13\,\text {Te}\text {V}$

A search is presented for a heavy vector resonance decaying into a Z boson and the standard model Higgs boson, where the Z boson is identified through its leptonic decays to electrons, muons, or neutrinos, and the Higgs boson is identified through its hadronic decays. The search is performed in a Lorentz-boosted regime and is based on data collected from 2016 to 2018 at the CERN LHC, corresponding to an integrated luminosity of 137fb -1 . Upper limits are derived on the production of a narrow heavy resonance Z', and a mass below 3.5 and 3.7TeV is excluded at 95% confidence level in models where the heavy vector boson couples predominantly to fermions and to bosons, respectively. These are the most stringent limits placed on the Heavy Vector Triplet Z' model to date. If the heavy vector boson couples exclusively to standard model bosons, upper limits on the product of the cross section and branching fraction are set between 23 and 0.3fb for a Z' mass between 0.8 and 4.6TeV, respectively. This is the first limit set on a heavy vector boson coupling exclusively to standard model bosons in its production and decay.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Search for long-lived particles decaying to leptons with large impact parameter in proton–proton collisions at $\sqrt{s} = 13\,\text {Te}\text {V}$

A search for new long-lived particles decaying to leptons using proton–proton collision data produced by the CERN LHC at √s = 13TeV is presented. Events are selected with two leptons (an electron and a muon, two electrons, or two muons) that both have transverse impact parameter values between 0.01 and 10cm and are not required to form a common vertex. Data used for the analysis were collected with the CMS detector in 2016, 2017, and 2018, and correspond to an integrated luminosity of 118 (113)fb -1 in the ee channel (eμ and μμ channels). The search is designed to be sensitive to a wide range of models with displaced eμ, ee, and μμ final states. The results constrain several well-motivated models involving new long-lived particles that decay to displaced leptons. For some areas of the available phase space, these are the most stringent constraints to date.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Azimuthal correlations in Z +jets events in proton–proton collisions at $\sqrt{s} = 13\,\text {Te}\text {V} $

The production of Z bosons associated with jets is measured in pp collisions at $\sqrt{s}=13\,\text {TeV}$ with data recorded with the CMS experiment at the LHC corresponding to an integrated luminosity of 36.3 fb -1 . The multiplicity of jets with transverse momentum $p$ T > 30 GeV is measured for different regions of the Z boson’s $p$ T (Z ), from lower than 10 GeV to higher than 100 GeV. The azimuthal correlation $Δ\phi$ between the Z boson and the leading jet, as well as the correlations between the two leading jets are measured in three regions of $p$ T (Z ). The measurements are compared with several predictions at leading and next-to-leading orders, interfaced with parton showers. Predictions based on transverse-momentum dependent parton distributions and corresponding parton showers give a good description of the measurement in the regions where multiple parton interactions and higher jet multiplicities are not important. The effects of multiple parton interactions are shown to be important to correctly describe the measured spectra in the low $p$ T (Z ) regions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Search for pair production of heavy particles decaying to a top quark and a gluon in the lepton+jets final state in proton–proton collisions at $\sqrt{s}=13\,\text {Te}\hspace{-.08em}\text {V}$

A search is presented for the pair production of new heavy resonances, each decaying into a top quark (t) or antiquark and a gluon (g). The analysis uses data recorded with the CMS detector from proton–proton collisions at a center-of-mass energy of 13 TeV at the LHC, corresponding to an integrated luminosity of 138 fb -1 . Events with one muon or electron, multiple jets, and missing transverse momentum are selected. After using a deep neural network to enrich the data sample with signal-like events, distributions in the scalar sum of the transverse momenta of all reconstructed objects are analyzed in the search for a signal. No significant deviations from the standard model prediction are found. Upper limits at 95% confidence level are set on the product of cross section and branching fraction squared for the pair production of excited top quarks in the t* → tg decay channel. The upper limits range from 120 to 0.8 fb for a t* with spin-1/2 and from 15 to 1.0 fb for a t* with spin-3/2. These correspond to mass exclusion limits up to 1050 and 1700 GeV for spin-1/2 and spin-3/2 t* particles, respectively. These are the most stringent limits to date on the existence of t* → tg resonances.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Search for resonances decaying to an anomalous jet and a Higgs boson in proton–proton collisions at $\sqrt{s}=13\,\text {Te}\hspace{-.08em}\text {V}$

This paper presents a search for new physics through the process where a massive particle, X, decays into a Higgs boson and a second particle, Y. The Higgs boson subsequently decays into a bottom quark–antiquark pair, which is reconstructed as a single large-radius jet. The decay products of Yare also assumed to produce a single large-radius jet. The identification of the Yparticle is enhanced by computing the anomaly score of its candidate jet using an autoencoder, which measures deviations from typical quark- or gluon-induced jets. This allows a simultaneous search for multiple Ydecay scenarios within a single analysis. In the main benchmark process, Yis a scalar particle that decays into a Wboson pair. Two other scalar Ydecay processes are also considered as benchmarks: decays to a light quark–antiquark pair, and decays to a top quark–antiquark pair. A fourth benchmark process considers Yas a hadronically decaying top quark, arising from the decay of a vector-like quark into a top quark and a Higgs boson. Data recorded by the CMS experiment at a center-of-mass energy of 13 TeV in 2016–2018, corresponding to an integrated luminosity of 138 fb -1 , are analyzed. The search covers Xmasses between 1.4 and 3.0 TeV and Ymasses between 90 and 400 TeV, with all simulated signals produced in the narrow-width approximation. No significant excess above the standard model background expectation is observed. The most stringent upper limits to date are placed on benchmark signal cross sections for various masses of X and Y particles

Hayrapetyan, A. [Yerevan Physics Institute]↗
DOE OSTI2026

Search for heavy resonances decaying into two Higgs bosons in the $\text {b}{\bar{\text {b}}} \tau ^{+} \tau ^{-}$ final state in proton–proton collisions at $\sqrt{s} = 13\,\text {Te}\hspace{-.08em}\text {V}$

A search is presented for massive narrow-width resonances in the mass range of 1–4.5 TeV , decaying into pairs of Higgs bosons (HH). The search uses proton–proton collision data at a center-of-mass energy of 13 TeV collected with the CMS detector at the CERN LHC during 2016–2018, corresponding to an integrated luminosity of 138 fb -1 . The analysis targets final states where one Higgs boson decays into a pair of bottom quarks and the other into a pair of tau leptons, ${\text {X}} \rightarrow {\text {HH}} \rightarrow \text {b}{\bar{\text {b}}}\,\tau ^{+}\tau ^{-}$. It uses a single large radius jet to reconstruct the ${\text {H}} \rightarrow \text {b}{\bar{\text {b}}}$ decay, while the ${\text {H}} \rightarrow \tau ^{+}\tau ^{-}$ decay products can either be contained within a single large radius jet or appear as two isolated tau leptons. The observed data are consistent with standard model background expectations. Upper limits at 95% confidence level are set on the production cross section for resonant HH production for masses between 1 and 4.5 TeV. This analysis sets the most sensitive limits to date on ${\text {X}} \rightarrow {\text {HH}} \rightarrow \text {b}\bar{\hbox {b}}\, \tau ^{+}\tau ^{-}$ decays in the mass range of 1.4–4.5 TeV.

Hayrapetyan, A. [Yerevan Physics Institute]↗
DOE OSTI2020

Integrated Data Analysis to Improve Te and Zeff Measurement on NSTX-U

The multi-energy soft x-ray (ME-SXR) camera is a new concept for a fusion plasma diagnostic based on a pixelated detector with adjustable photon cutoff thresholds. It is a single, compact, solid-state detector which combines spatial and spectral sensitivity and can be configured remotely at run time, making it ideal for a fusion environment. The detector can be configured for application to a wide range of physics problems including impurity transport, electron temperature profiles, and non-thermal effects. The detector has been installed on the Madison Symmetric Torus (MST) as part of a collaboration between Princeton Plasma Physics Laboratory and the University of Wisconsin–Madison to develop the technology and analysis techniques. A full diagnostic forward model of the ME-SXR diagnostic has been developed to enable analysis of the raw photon count data. This model incorporates the atomic physics underlying the plasma emission, diagnostic geometry, and detector response characteristics. Employing this model, a Bayesian analysis approach is used to extract electron temperature from the raw data. This analysis approach uses all available information, clearly quantifies prior information, and handles uncertainties transparently. The ME-SXR camera is being used to study the 3D (helical, stellarator-like) state that forms in the MST device. This helical core structure has improved energy confinement. The transition to the helical state is accompanied by a rise in electron temperature in the central part of the helical structure, but then this enhancement fluctuates. The characteristics of this fluctuation are being compared to a magneto-hydrodynamics model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Development of High-Quality, Very Large-Grained Cd(Se,Te) Thin Films for CdTe Solar Modules (Final Technical Report)

TCF-21-25048 is a one-year project to quantify the potential attributes of recent NREL inventions where CdTe devices with grain sizes exceeding 100's of microns in lateral dimension can be fabricated using a novel seeded-epitaxial process. A CdSe0.1Te0.9 film is evaporated on commercially available transparent conducting oxide (TCO) where the latter surface roughness (Ra) has been reduced to < 1-nm. After NREL's colossal grain growth (CGG) process, the grain size of this "seed" layer is increased to 100-1000 um. CdTe is then deposited epitaxially resulting in a large-grain CdTe device structure without use of CdCl2. As of this report, we have: Demonstrated the feasibility of using Tec-15 substrates after surface roughness (Ra) reduction (nexTC); Developed reproducible CGG processes for this commercially available substrate; Developed a close-spaced sublimation (CSS) process for CdTe epitaxy using these substrates; Demonstrated that large-grain CdTe films have less sub-band (band tail) absorption than conventional, small-grain CdTe; Demonstrated that large-grain CdTe films (no CdCl2) have carrier lifetimes up to 1.5 ns; Demonstrated that carrier lifetimes in epi-CdTe films (no CdCl2) have comparable lifetimes when compared to the best pX-CdTe films (FSLR) treated with CdCl2; Started making large-grain CdTe devices using CGG templates and epitaxially deposited CdTe.

14 SOLAR ENERGY↗