Ranger TV subsystem flight evaluation report for flight model III-1 /RA-6/ and design review report
Flight evaluation on Model III /RA-6/ of Ranger television subsystem - failure analysis
FAILURE↗
SEARCH · Engineering Papers
Results for “TELEVISION”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Microcircuit applications in the Apollo TV CAMERA
Microcircuit design concepts applicable to Apollo television camera
MICROCIRCUIT↗
Threshold sensitivity of astronomical TV DEVICES
Astronomical television system to reduce exposure time for obtaining images of weak stars using average-size instruments
ASTRONOMICAL PHOTOGRAPHY↗
Surveyor III Mission Report. Part II - Scientific Results
Television observations, soil sampling, lunar surface mechanical properties, lunar temperature and thermal characteristics, and other scientific results from Surveyor III mission
LUNAR SOIL↗
Apollo 11 Telemetry Data Recordings: A Final Report
When astronauts landed on the moon on July 20, 1969, the Eagle lander carried a small, unconventional television camera affixed to the inside of the door. It had one mission. Once astronauts opened the door and activated the camera, it would begin shooting live images of the historic event, transmitting the raw footage by way of an antenna to Earth below. There, engineers at three tracking stations would tape the original signals onto one-inch telemetry tapes fpr backup and then also convert the raw feed into a conventional format compatible with American broadcast standards.
Apollo 11↗
Wind-Wildlife Impacts Literature Database (WILD)(Fact Sheet)
The Wind-Wildlife Impacts Literature Database (WILD), developed and maintained by the National Wind Technology Center (NWTC) at the National Renewable Energy Laboratory (NREL), is comprised of over 1,000 citations pertaining to the effects of land-based wind, offshore wind, marine and hydrokinetic, power lines, and communication and television towers on wildlife.
17 WIND ENERGY↗
Results with a micro-cavity plasma panel detector
During the three last years, a complete study of a radiation detector based on plasma panel technology (main component of plasma television display) has been completed using source, cosmic ray and beam. This studies showed a fast response (O(5 ns)), high spatial resolution detection of ionizing particle and minimum ionizing particles. It shows very promising results in term of pixel-to-pixel uniformity and time stability of both signal shapes and rates. The prototype has also demonstrated very low background over a wide range of applied high voltages, excellent pixel response isolation, time resolutions of a few nanoseconds, and efficiencies above 95% over a 100-volt range for beta particles emitted by a {sup 106}Ru radioactive source. A full report will be presented (authors)
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Realizing Wide-Gamut Human-Centric Display Lighting with K 3 AlP 3 O 9 N:Eu 2+
Abstract Computers, televisions, and smartphones are revolutionized by the invention of InGaN blue light-emitting diode (LED) backlighting. Yet, continual exposure to the intense blue LED emission from these modern displays can cause insomnia and mood disorders. Developing “human-centric” backlighting that uses a violet-emitting LED chip and a trichromatic phosphor mixture to generate color images is one approach that addresses this problem. The challenge is finding a blue-emitting phosphor that possesses a sufficiently small Stokes’ shift to efficiently down-convert violet LED light and produce a narrow blue emission. This work reports a new oxynitride phosphor that meets this demand. K 3 AlP 3 O 9 N:Eu 2+ exhibits an unexpectedly narrow (45 nm, 2206 cm -1 ), thermally robust, and efficient blue photoluminescence upon violet excitation. Computational modeling and temperature-dependent optical property measurements reveal that the narrow emission arises from a rare combination of preferential excitation and site-selective quenching. The resulting chromaticity coordinates of K 3 AlP 3 O 9 N:Eu 2+ lie closer to the vertex of the Rec. 2020 than a blue LED chip and provides access to ≈10% more colors than a commercial tablet when combined with commercial red- and green-emitting phosphors. Alongside the wide gamut, tuning the emission from the violet LED and phosphor blend can reduce blue light emissions to produce next-generation, human-centric displays.
36 MATERIALS SCIENCE↗
Video game console usage and US national energy consumption: Results from a field-metering study
There has been an increased in attention placed on the energy consumption of miscellaneous electronic loads in buildings by energy analysts and policymakers in recent years. The share of electricity consumed by consumer electronics in US households has increased in the last decade. Many devices, however, lack robust energy use data, making energy consumption estimates difficult and uncertain. Video game consoles are high-performance machines present in approximately half of all households and can consume a considerable amount of power. The precise usage of game consoles has significant uncertainty, however, leading to a wide range of recent national energy consumption estimates. We present here an analysis based on field-metered usage data, collected as part of a larger field metering study in the USA. This larger study collected data from 880 households in 2012 on a variety of devices, including 113 game consoles (the majority of which are Generation 7 consoles). From our metering, we find that although some consoles are left on nearly 24 h/day, the overall average usage is lower than many other studies have assumed, leading to a US national energy consumption estimate of 7.1 TWh in 2012. Nevertheless, there is an opportunity to reduce energy use with proper game console power management, as a substantial amount of game console usage occurs with the television turned off. The emergence of Generation 8 consoles may increase national energy consumption.
32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
Monitoring installation of partially occluded subassemblies in modular construction factories using BIM, ray tracing, and computer vision
Modular and offsite construction methods are being increasingly adopted due to the advantages they offer in terms of project completion time, quality, and energy-efficiency. Despite these advantages, the current state of monitoring systems in modular construction factories highly relies on labor-intensive, subjective, and error-prone observational methods. A large body of research has aimed to automate the monitoring process using an array of sensors, such as IMUs and RFIDs, during the past two decades. Recently, computer vision-based methods have gained increasing interest as a non-intrusive technology to monitor the process inside modular construction factories. However, partial occlusion challenges have impeded their practical application on a large scale. This challenge is specifically important for monitoring the installation of subassemblies since they can obstruct the view of the monitoring camera, especially those that enable long-term monitoring like closed-circuit television (CCTV) fixed-view surveillance cameras. Here, this paper aims to address this challenge by proposing a novel computer vision-based method to monitor the installation of new subassemblies inside modular factories in highly occluded scenes. The proposed methodology identifies the subassemblies in the CCTV video footage using computer vision, analyzes the occlusions using BIM and ray casting techniques, and estimates the progress of assembly by comparing the BIM model with the detected subassemblies in the video. The proposed methodology was successfully validated on surveillance videos captured from a volumetric modular construction factory in the U.S., achieving 93% accuracy in identifying the installation of subassemblies. The results from this research show that the integration of BIM and computer vision is a promising method for monitoring the installation processes inside modular factories under severe occlusion.
97 MATHEMATICS AND COMPUTING↗
Are media reports able to cause somatic symptoms attributed to WiFi radiation? An experimental test of the negative expectation hypothesis
People suffering from idiopathic environmental intolerance attributed to electromagnetic fields (IEI-EMF) experience numerous non-specific symptoms that they attribute to EMF. The cause of this condition remains vague and evidence shows that psychological rather than bioelectromagnetic mechanisms are at work. We hypothesized a role of media reports in the etiology of IEI-EMF and investigated how somatosensory perception is affected. 65 healthy participants were instructed that EMF exposure can lead to enhanced somatosensory perception. Participants were randomly assigned to watch either a television report on adverse health effects of EMF or a neutral report. During the following experiment, participants rated stimulus intensities of tactile (electric) stimuli while being exposed to a sham WiFi signal in 50% of the trials. Sham WiFi exposure led to increased intensity ratings of tactile stimuli in the WiFi film group, especially in participants with higher levels of somatosensory amplification. Participants of the WiFi group reported more anxiety concerning WiFi exposure than the Control group and tended to perceive themselves as being more sensitive to EMF after the experiment compared to before. Sensational media reports can facilitate enhanced perception of tactile stimuli in healthy participants. People tending to perceive bodily symptoms as intense, disturbing, and noxious seem most vulnerable. Receiving sensational media reports might sensitize people to develop a nocebo effect and thereby contribute to the development of IEI-EMF. By promoting catastrophizing thoughts and increasing symptom-focused attention, perception might more readily be enhanced and misattributed to EMF. - Highlights: • The etiology of idiopathic environmental intolerance attributed to electromagnetic fields (IEI-EMF) is unknown. • Expectations induced by sensational TV reports could be important in this context. • Watching a sensational movie on EM radiation enhances tactile sensitivity. • Especially vulnerable are persons with high levels of somatosensory amplification. • IEI-EMF might be caused by a nocebo effect.
54 ENVIRONMENTAL SCIENCES↗
MgO:Dy{sup 3+} nanophosphor: Self ignition route, characterization and its photoluminescence properties
For the first time series of MgO phosphors doped with different concentrations of Dy{sup 3+} (1–9 mol%) were prepared by solution combustion method using glycine as a fuel. The final products were well characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy and transmission electron microscopy. The powder X-ray diffraction patterns of the as-formed product show single cubic phase. The crystallite size estimated using Scherrer's method was found to be in the range 5–15 nm and the same was confirmed by transmission electron microscopy result. Photoluminescence properties of Dy{sup 3+} (1–9 mol%) doped MgO for near ultra violet excitation (325 nm) was studied in order to investigate the possibility of its use in white light emitting diode applications. The emission spectra consists of intra 4f transitions of Dy{sup 3+}, namely {sup 4}F{sub 9/2} → {sup 6}H{sub 15/2} (483 nm), and {sup 4}F{sub 9/2} → {sup 6}H{sub 13/2} (573 nm). Further, the emission at 573 nm shows strong yellow emission and can be applied to the yellow emission of phosphor for the application for near ultraviolet excitation. The intensity of yellow emission was attributed to intrinsic defects, especially oxygen-vacancies, which could assist the energy transfer from the MgO host to the Dy{sup 3+} ions. The Commission International De I-Eclairage chromaticity co-ordinates were calculated from emission spectra, the values (x,y) were very close to the National Television System Committee standard value of white emission. Therefore, the present phosphor was highly useful for display applications. - Graphical Abstract: PL emission spectra and CIE diagram of MgO:Dy{sup 3+} nanophosphor. - Highlights: • MgO:Dy{sup 3+} prepared by simple and low cost LCS method at low temperature (400 °C). • Characteristic emission peaks of Dy{sup 3+} ion at ∼ 483 and 573 nm are recorded. • CIE co-ordinate values located in the white region. • Present phosphor was quite useful for display applications.
36 MATERIALS SCIENCE↗
Simple coating synthesis and enhanced luminescence behaviour of LiLa(MoO4)2:Eu3+@NaF
Highlights: • LiLa(MoO{sub 4}){sub 2}:Eu{sup 3+}{sub 0.06} @ (NaF){sub y wt} were synthesized with a simple coating method. • PL intensity can be enhanced as high as 4.80 times by coating NaF. • Enhancement PL intensity is a major effect, and increasing R is a minor effect. • LiLa(MoO{sub 4}){sub 2}:Eu{sup 3+}{sub 0.06} @ (NaF){sub 0.025 wt} was a phosphor with high R values (R = 5.89). - Abstract: A series of LiLa(MoO{sub 4}){sub 2}:Eu{sup 3+}@ (NaF){sub y wt} were prepared with a simple coating method. XRD results confirm that NaF coating will cause the slight expand of the lattice volume for the sample. Strongly enhanced emission effect inducing by NaF coating is observed. The emission spectra (PL) intensity of the optimal sample, LiLa(MoO{sub 4}){sub 2}:Eu{sup 3+}{sub 0.06} @ (NaF){sub 0.025wt} is as high as 4.8 times of that of LiLa(MoO{sub 4}){sub 2}:Eu{sup 3+}{sub 0.06}. Furthermore, dual emission properties inducing by NaF coating are observed. Enhancement emission of Eu{sup 3+} is a major effect, and increasing R is a minor effect. The optimal coating content of NaF is 2.5 wt%, which the corresponding chromaticity coordinates excited at 465 nm is x = 0.6650, y = 0.3347, which is nearly as same as the NTSC (National Television Standard Committee) standard values for red (x = 0.67, y = 0.33). So, it is a potential red-emitting phosphor with high R values (R = 5.89) for blue light-based white LED.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Enhanced red luminescence quantum yield from Gd3+/Eu3+: CaLa2ZnO5 phosphor spheres for photonic applications
Highlights: • Ravishing red emission is observed from Gd{sup 3+}/Eu{sup 3+}: CaLa{sub 2}ZnO{sub 5} phosphor spheres. • Red emission of Eu{sup 3+} was significantly enhanced by co-doping with Gd{sup 3+}. • Effective sensitization of Gd{sup 3+} ions and enhanced quantum yield have been elucidated. • Energy transfer from Gd{sup 3+} to Eu{sup 3+} was demonstrated by several fluorescence dynamics. • CIE coordinates are very close to National Television Standard Committee (NTSC). - Abstract: Novel bright red emission was obtained from co-doped Gd{sup 3+}/Eu{sup 3+}: CaLa{sub 2}ZnO{sub 5} (CLZO) phosphor spheres. We have successfully synthesized co-doped Gd{sup 3+}/Eu{sup 3+}: CLZO phosphor spheres by citrate sol-gel method. Structural and morphological analysis was carried out by XRD and FE-SEM. EDS and XPS studies were employed to analyze the presence of elements and their ionic states respectively. The complex formation studies were carried out by the FTIR spectral study. The photoluminescence spectral profiles confirm the dazzling red emission has been observed at 626 nm ({sup 5}D{sub 0} → {sup 7}F{sub 2}) from the Eu{sup 3+}: CLZO phosphors under the excitation of 467 nm. Upon increasing the Eu{sup 3+} concentration, the photoluminescence performance has also increased remarkably. The optimized concentration of the Eu{sup 3+} was noticed at 12 mol%. Upon co-doping with Gd{sup 3+} ions to Eu{sup 3+}: CLZO phosphors, the red emission pertaining to Eu{sup 3+} was appreciably enhanced through energy transfer from Gd{sup 3+} to Eu{sup 3+} ions. The energy transfer mechanism was substantiated by several fluorescent methods such as lifetime decay dynamics and quantum efficiencies. Commission International de I’Echairage (CIE) 1931 chromaticity coordinates (x–y) calculated for singly doped and co-doped CLZO samples. The CIE coordinates were found to be (0.6644, 0.3355) and (0.6688, 0.3311) respectively, which were good consistent with the standard values of NTSC surprisingly. Correlated color temperature (CCT) value was evaluated for optimised co-doped sample and it was found to be between 2000–5000 K which could be more preferable red component for warm white light applications. The lifetime and quantum efficiency of the optimized co-doped sample have been evaluated as 1.102 ms and 69% respectively. The ravishing red emission of the Gd{sup 3+}/Eu{sup 3+}: CLZO phosphor spheres which suggests that these phosphor materials could be promising candidates for red luminescent optical devices.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Spectroscopic studies of Dy3+ doped borate glasses for cool white light generation
Highlights: • BAZN glasses with Dy{sup 3+} ions were prepared using melt quench technique. • Under n-UV excitation the BAZN glasses show white light emission. • Energy transfer through cross-relaxation leads to concentration quenching. • Calculated CIE coordinates are close to the commercial w-LED. • 0.5 mol% of Dy{sup 3+} in these glasses are apt for cool white light generation. - Abstract: The Dy{sup 3+} ions doped Na{sub 2}O-ZnO-Al{sub 2}O{sub 3}-B{sub 2}O{sub 3} (BAZN) glasses with variable doping concentrations were synthesized by melt-quenching technique. The XRD pattern reveals amorphous nature of the as-synthesized glass. The FT-IR spectrum reveals various stretching and bending vibration of aluminates, borate and some other groups. The emission spectra exhibit two intense bands at around 482 nm (blue) and 575 nm (yellow) corresponding to the {sup 4}F{sub 9/2} → {sup 6}H{sub 15/2} and F{sub 9/2} → {sup 6}H{sub 13/2} transitions respectively. The CIE chromaticity coordinates of the as-synthesized glasses are lying in white region and in proximity to the coordinates for white light specified by National Television Standard Committee and commercial phosphor converted white light emitting devices. The decay profile of BAZN glasses showed bi-exponential behavior due to the energy transfer mechanism from excited donor ion to unexcited acceptor ion. The above-mentioned studies show potential of the as-synthesized Dy{sup 3+} doped BAZN glasses in solid state lighting applications.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Time bomb or hidden treasure? Characteristics of junk TVs and of the US households who store them
Highlights: ► US households are storing 84.1 million broken or obsolete (junk) TVs. ► They represent 2.12 million metric tons of scrap. ► The value of these materials is approximately $21 per TV. ► Our count models characterize US households who store junk TVs. ► Our results are useful for designing more effective TV recycling programs. - Abstract: Within the growing stockpile of electronic waste (e-waste), TVs are especially of concern in the US because of their number (which is known imprecisely), their low recycling rate, and their material content: cathode ray tube televisions contain lead, and both rear projection and flat panel displays contain mercury, in addition to other potentially toxic materials. Based on a unique dataset from a 2010 survey, our count models show that pro-environmental behavior, age, education, household size, marital status, gender of the head of household, dwelling type, and geographic location are statistically significant variables for explaining the number of broken or obsolete (junk) TVs stored by US households. We also estimate that they are storing approximately 84.1 million junk TVs, which represents 40 pounds of scrap per household. Materials in each of these junk TVs are worth $21 on average at January 2012 materials prices, which sets an upper bound on collecting and recycling costs. This information should be helpful for developing more effective recycling strategies for TVs in the e-waste stream.
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
A material flow analysis on current electrical and electronic waste disposal from Hong Kong households
Highlights: ► Most household TWARC waste is sold directly to private e-waste collectors in HK. ► The current e-waste recycling network is popular with HK households. ► About 80% of household generated TWARC is exported overseas each year. ► Over 7000 tonnes/yr of household generated TWARC reach landfills. ► It is necessary to upgrade safety and awareness in HK’s e-waste recycling industry. - Abstract: A material flow study on five types of household electrical and electronic equipment, namely television, washing machine, air conditioner, refrigerator and personal computer (TWARC) was conducted to assist the Government of Hong Kong to establish an e-waste take-back system. This study is the first systematic attempt on identifying key TWARC waste disposal outlets and trade practices of key parties involved in Hong Kong. Results from two questionnaire surveys, on local households and private e-waste traders, were used to establish the material flow of household TWARC waste. The study revealed that the majority of obsolete TWARC were sold by households to private e-waste collectors and that the current e-waste collection network is efficient and popular with local households. However, about 65,000 tonnes/yr or 80% of household generated TWARC waste are being exported overseas by private e-waste traders, with some believed to be imported into developing countries where crude recycling methods are practiced. Should Hong Kong establish a formal recycling network with tight regulatory control on imports and exports, the potential risks of current e-waste recycling practices on e-waste recycling workers, local residents and the environment can be greatly reduced.
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Monitoring of WEEE plastics in regards to brominated flame retardants using handheld XRF
Highlights: • Specification of an empirical factor for conversion from bromine to PBB and PBDE. • The handheld XRF device was validated for this particular application. • A very large number of over 4600 pieces of monitor housings was analysed. • The recyclable fraction mounts up to 85% for TV but only 53% of PC waste plastics. • A high percentage of pieces with bromine contents of over 50,000 ppm was obtained. - Abstract: This contribution is focused on the on-site determination of the bromine content in waste electrical and electronic equipment (WEEE), in particular waste plastics from television sets (TV) and personal computer monitors (PC) using a handheld X-ray fluorescence (XRF) device. The described approach allows the examination of samples in regards to the compliance with legal specifications for polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) directly after disassembling and facilitates the sorting out of plastics with high contents of brominated flame retardants (BFRs). In all, over 3000 pieces of black (TV) and 1600 pieces of grey (PC) plastic waste were analysed with handheld XRF technique for this study. Especially noticeable was the high percentage of pieces with a bromine content of over 50,000 ppm for TV (7%) and PC (39%) waste plastics. The applied method was validated by comparing the data of handheld XRF with results obtained by GC–MS. The results showed the expected and sufficiently accurate correlation between these two methods. It is shown that handheld XRF technique is an effective tool for fast monitoring of large volumes of WEEE plastics in regards to BFRs for on-site measurements.
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗