Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surface structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

IPL processing of the Mariner 10 images of Mercury

This paper describes the digital processing performed on the images of Mercury returned to earth from Mariner 10. Each image contains considerably more information than can be displayed in a single picture. Several specialized processing techniques and procedures are utilized to display the particular information desired for specific scientific analyses: radiometric decalibration for photometric investigations, high-pass filtering to characterize morphology, modulation transfer function restoration to provide the highest possible resolution, scene-dependent filtering of the terminator images to provide maximum feature discriminability in the regions of low illumination, and rectification to cartographic projections to provide known geometric relationships between features. A principal task was the construction of full disk mosaics as an aid to the understanding of surface structure on a global scale.

Soha, J. M.↗
NASA NTRS1976

Acceleration of fatigue tests for built-up titanium components

A study was made of the feasibility of a room-temperature scheme of accelerating fatigue tests for Mach 3 advanced supersonic transport aircraft. The test scheme used equivalent room-temperature cycles calculated for supersonic flight conditions. Verification tests were conducted using specimens representing titanium wing lower surface structure. Test-acceleration parameters were developed for the test with an auxiliary test set. Five specimens were tested with a flight-by-flight load and temperature spectrum to simulate typical Mach 3 operation. Two additional sets of five specimens were tested at room temperature to evaluate the test-acceleration scheme. The fatigue behavior of the specimens generally correlated well with the proposed correction method.

Watanabe, R. T.↗
NASA NTRS1975

Skylab analysis of San Francisco Bay

The distribution and volume of sediment present in suspension during the Skylab 4 overpass for San Pablo Bay and the Carquinez Strait is studied along with the movement and eventual distribution of both natural and dredged sediment in San Francisco Bay. The most useful Skylab sensor film is found to be the S-190B color photography. Changes in temperature, dissolved oxygen, pH, salinity, and pollutants information simultaneously collected are correlated with the spectral differences observed in the various Skylab data. The techniques outlined should be applicable for coastal and estuarine process studies in other areas. A suspensate concentration of about 2 mg/liter is quite sufficient to tag a surface current system, and the surface structure of currents with over 250 mg/liter can be imaged by using progressively longer wavelength filters.

Steller, D. D.↗
NASA NTRS1977

Models of radar imaging of the ocean surface waves

A number of models which would explain ocean wave imagery taken with a synthetic aperture imaging radar are analyzed analytically and numerically. Actual radar imagery is used to support some conclusions. The models considered correspond to three sources of radar backscatter cross section modulation: tilt modulation, roughness variation, and the wave orbital velocity. The effect of the temporal changes of the surface structure, parametric interactions, and the resulting distortions are discussed.

Elachi, C.↗
NASA NTRS1977

Topography of sinuous rilles in the Harbinger Mountains region of the moon

Five sinuous rilles in mare basalts in the Harbinger Mountains region of the moon are described. Rille length ranges from 12 to 79 km, width from 0.8 to 4.8 km, and depth from 100 to 300 m. The rilles appear to become shallower to the north, while the southern ends are characterized by circular-to-elongate depressions that occur on a 30-km-in-diameter dome of probable volcanic origin. Longitudinal profiles show that the rille floors have a northward slope of less than one deg, consistent with the general slope of the surrounding mare surface. Structural studies indicate that slope, rather than the regional structural pattern, is the dominant factor controlling rill direction. Topographic data support the theory that the rilles were formed as lave channels or tubes.

Strain, P. L.↗
NASA NTRS1977

Analytical model of the combustion of multicomponent solid propellants

Multiple flame models derived for simple composite propellants are extended to describe the combustion of propellants containing multimodal particle sizes, mixed oxidizers and monopropellant binders. Models combining the component contributions to propellant surface structure, flame structure and energy distribution are based in part upon experimental observations and in part upon hypotheses constrained to provide reasonable agreement with measured burning rate characteristics. The methods employed consist of superposition, interaction and iteration. The computerized model is applied to explain the effects of multiple ingredients and to discuss burning rate tailoring problems of current interest.

Cohen, N. S.↗
NASA NTRS1977

Nitramine smokeless propellant research

A transient ballistics and combustion model is derived to represent the closed vessel experiment that is widely used to characterize propellants. A computer program is developed to solve the time-dependent equations, and is applied to explain aspects of closed vessel behavior. In the case of nitramine propellants the cratering of the burning surface associated with combustion above break-point pressures augments the effective burning rate as deduced from the closed vessel experiment. Low pressure combustion is significantly affected by the ignition process and, in the case of nitramine propellants, by the developing and changing surface structure. Thus, burning rates deduced from the closed vessel experiment may or may not agree with those measured in the equilibrium strand burner. Series of T burner experiments are performed to compare the combustion instability characteristics of nitramine (HMX) containing propellants and ammonium perchlorate (AP)propellants. Although ash produced by more fuel rich propellants could have provided mechanical suppression, results from clean-burning propellants permit the conclusion that HMX reduces the acoustic driving.

Cohen, N. S.↗
NASA NTRS1978

Optical observations of the sun from a solar probe

The spatial resolution of solar surface structure to ultimate limits with simple instrumentation. The logic is simple: a 10 cm aperture telescope at 4 solar radii resolves the equivalent of a five meter telescope in earth orbit. Given the ease of producing a diffraction limited 10 cm telescope and the difficulty of fabricating a diffraction limited 5 meter telescope, the performance of the small telescope could well be better. The telescope described complements planned solar orbiting telescopes in earth orbit and would need only a few arcs seconds of pointing.

Zirin, H.↗
NASA NTRS1978

Ion beam sputtering of fluoropolymers

Ion beam sputter processing rates as well as pertinent characteristics of etched targets and films are described. An argon ion beam source was used to sputter etch and deposit the fluoropolymers PTFE, FEP, and CTFE. Ion beam energy, current density, and target temperature were varied to examine effects on etch and deposition rates. The ion etched fluoropolymers yield cone or spire-like surface structures which vary depending upon the type of polymer, ion beam power density, etch time, and target temperature. Sputter target and film characteristics documented by spectral transmittance measurements, X-ray diffraction, ESCA, and SEM photomicrographs are included.

Sovey, J. S.↗
NASA NTRS1978

Mutual phenomena of Jupiter's five inner satellites in 1979

In this paper, we first predict eclipses and occultations of the Galilean satellites in 1979 and find that, although circumstances are generally poor, about 75 events are observable. We have then made a special point of including 40 eclipses of J5 (Amalthea) by the Galilean satellites in the hope that both visual and far-infrared light curves can be obtained - the former giving accurate astrometric information for J5, and the latter possible bearing on its surface structure or composition.

Aksnes, K.↗
NASA NTRS1978

Analytical model of high pressure burning rates in a transient environment

A transient ballistics and combustion model is derived to represent the closed vessel experiment that is widely used to characterize the high pressure burning rates of solid propellants. The model is applied to explain why burning rates deduced from the closed vessel are in basic agreement with those measured from an equilibrium strand burner in the case of homogeneous propellants, but differ significantly in the case of nitramine composite propellants. Thermal profile time lag effects become small at high pressure because the burning rates become high. However, the development of the burning surface structure of those nitramine propellants which exhibit shifts in pressure exponent causes the mass burning rate to lag and then exceed the equilibrium value. It is necessary to consider this mechanism in applications dealing with high pressures and pressurization rates.

Cohen, N. S.↗
NASA NTRS1978

Ion beam sputtering of fluoropolymers

Etching and deposition of fluoropolymers are of considerable industrial interest for applications dealing with adhesion, chemical inertness, hydrophobicity, and dielectric properties. This paper describes ion beam sputter processing rates as well as pertinent characteristics of etched targets and films. An argon ion beam source was used to sputter etch and deposit the fluoropolymers PTFE, FEP, and CTFE. Ion beam energy, current density, and target temperature were varied to examine effects on etch and deposition rates. The ion etched fluoropolymers yield cone or spire-like surface structures which vary depending upon the type of polymer, ion beam power density, etch time, and target temperature. Also presented are sputter target and film characteristics which were documented by spectral transmittance measurements, X-ray diffraction, ESCA, and SEM photomicrographs.

Sovey, J. S.↗
NASA NTRS1979

Analysis of Lunar Seismic Signals: Determination of Instrumental Parameters and Seismic Velocity Distributions

Inverse filters were designed to correct the effect of instrumental response, coupling of the seismometer to the ground, and near surface structures. The least squares technique was used to determine the instrumental constants and the transfer functions of the long period lunar seismographs. The influence of noise and the results of these calculations are discussed.

Horvath, P.↗
NASA NTRS1981

Rotation and precession of cometary nuclei

The given review is concerned with a recent breakthrough in the investigation of polar-axis orientations and spin rates, and with the implications for the surface structure of cometary nuclei. The rotation data for twelve comets are summarized in a table. The progress achieved in the past few years has demonstrated that seemingly complex relations among observed physical and dynamical properties of comets can consistently be interpreted in terms of Whipple's (1950, 1951) model of a rotating icy-conglomerate nucleus. The nucleus, probably a few kilometers in diameter for an average comet, is believed to lose mass more or less continuously. Attention is given to the outgassing asymmetry, a formulation of the geometry of the directed ejection, and the role of rotation in cometary outbursts and splitting.

Sekanina, Z.↗
NASA NTRS1981

Design for active and passive flutter suppression and gust alleviation

Analytical design techniques for active and passive control of aeroelastic systems are based on a rational approximation of the unsteady aerodynamic loads in the entire Laplace domain, which yields matrix equations of motion with constant coefficients. Some existing schemes are reviewed, the matrix Pade approximant is modified, and a technique which yields a minimal number of augmented states for a desired accuracy is presented. The state-space aeroelastic model is used to design an active control system for simultaneous flutter suppression and gust alleviation. The design target is for a continuous controller which transfers some measurements taken on the vehicle to a control command applied to a control surface. Structural modifications are formulated in a way which enables the treatment of passive flutter suppression system with the same procedures by which active control systems are designed.

Karpel, M.↗
NASA NTRS1982

Volcanism and igneous processes in small icy satellites

Evidence for the production of endogenic processes of the small Saturnian satellites by igneous activity of low melting point NH3-H2O magma heated radiogenically is presented. An initial state of the inner satellites is modeled as a homogeneous mixture of particulate silicates and ices. Conductive transport is assumed to have either combined with heat capacity in a mixture of crystalline phases, or to have been reduced by the presence of dust, defects, vitreous or amorphous phases, and clathrates. The extent to which a eutectic melt could form is calculated in terms of the volume percentage of melt, with all heating above 175 K going toward overcoming the latent heat of the eutectic mix. Mimas and Enceladus were treated as free from radiogenic heat sources, which were significant for Tethys, Dione, Rhea, and Iapetus. The migrations of inner materials to form surface structures and seal off the interiors of the moons are described.

Stevenson, D. J.↗
NASA NTRS1983

The influence of sensor and flight parameters on texture in radar images

Texture is known to be important in the analysis of radar images for geologic applications. It has previously been shown that texture features derived from the grey level co-occurrence matrix (GLCM) can be used to separate large scale texture in radar images. Here the influence of sensor parameters, specifically the spatial and radiometric resolution and flight parameters, i.e., the orientation of the surface structure relative to the sensor, on the ability to classify texture based on the GLCM features is investigated. It was found that changing these sensor and flight parameters greatly affects the usefulness of the GLCM for classifying texture on radar images.

Frost, V. S.↗
NASA NTRS1981

Exploration for fractured petroleum reservoirs using radar/Landsat merge combinations

Since fractures are commonly propagated upward and reflected at the earth's surface as subtle linears, detection of these surface features is extremely important in many phases of petroleum exploration and development. To document the usefulness of microwave analysis for petroleum exploration, the Arkansas part of the Arkoma basin is selected as a prime test site. The research plan involves comparing the aircraft microwave imagery and Landsat imagery in an area where significant subsurface borehole geophysical data are available. In the northern Arkoma basin, a positive correlation between the number of linears in a given area and production from cherty carbonate strata is found. In the southern part of the basin, little relationship is discernible between surface structure and gas production, and no correlation is found between gas productivity and linear proximity or linear density as determined from remote sensor data.

Macdonald, H.↗