Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surface estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Regional Rates of Young US Forest Growth Estimated From Annual Landsat Disturbance History and IKONOS Stereo Imagery

Forests of the Contiguous United States (CONUS) have been found to be a large contributor to the global atmospheric carbon sink. The magnitude and nature of this sink is still uncertain and recent studies have sought to define the dynamics that control its strength and longevity. The Landsat series of satellites has been a vital resource to understand the long-term changes in land cover that can impact ecosystem function and terrestrial carbonstock. We combine annual Landsat forest disturbance history from 1985 to 2011 with single date IKONOS stereoimagery to estimate the change in young forest canopy height and above ground live dry biomass accumulation for selected sites in the CONUS. Our approach follows an approximately linear growth rate following clearing over short intervals and does not estimate the distinct non-linear growth rate over longer intervals.We produced canopy height models by differencing digital surface models estimated from IKONOS stereo pairs with national elevation data (NED). Correlations between height and biomass were established independently using airborne LiDAR, and then applied to the IKONOS-estimated canopy height models. Graphing current biomass against time since disturbance provided biomass accumulation rates. For 20 study sites distributed across five regions of the CONUS, 19 showed statistically significant recovery trends (p is less than 0.001) with canopy growth from 0.26 m yr-1to 0.73 m yr-1. Above ground live dry biomass (AGB) density accumulation ranged from 1.31 t/ha yr-1 to 12.47 t/ha yr-1. Mean forest AGB accumulationwas 6.31 t/ha yr-1 among all sites with significant growth trends. We evaluated the accuracy of our estimates by comparing to field estimated site index curves of growth, airborne LiDAR data, and independent model predictions of C accumulation. Growth estimates found with this approach are consistent with site index curves and total biomass estimates fall within the range of field estimates. This is aviable approach to estimate forest biomass accumulation in regions with clear-cut harvest disturbances.

Neigh, Christopher S. R.↗

Multiscale ACI Satellite Database

The SATELLITE_EAGLES_PNNL NetCDF dataset contains a suite of satellite- and reanalysis-derived atmospheric and surface parameters on a regular latitude–longitude grid. The dataset includes core geophysical fields such as land fraction, aerosol optical depth at multiple wavelengths (465, 550, 667, and 865 nm), sea surface temperature, estimated inversion strength, and various thermodynamic and dynamic quantities (e.g., relative humidity, vertical velocity, boundary-layer height, and surface fluxes) from both MERRA and ERA reanalysis products, provided as daily-mean and instantaneous values. A major component of the dataset consists of MODIS-retrieved cloud microphysical properties, including cloud droplet number concentration, cloud effective radius, optical thickness, and liquid water path, provided for three compositing regimes (“All,” “Q06,” and “G18”). Corresponding cloud-top parameters—temperature, height, and pressure—along with total and domain-mean cloud fraction fields are also included. The file further integrates additional satellite data from AMSR-E (for cloud water, rain water, and surface precipitation retrievals) and CERES (for top-of-atmosphere radiative fluxes, cloud fractions, and albedo). This dataset is designed to evaluate aerosol–cloud interactions in warm clouds, emphasizing the use of MODIS for deriving cloud droplet number concentration and liquid water path statistics. The complementary satellite and reanalysis fields are co-located and time-matched to the same instantaneous MODIS observations, enabling consistent comparisons between cloud properties, aerosol loading, and large-scale meteorological conditions. The dataset is recently featured in Christensen et al. (2025), Machine Learning Reveals Strong Grid-Scale Dependence in the Satellite Nd–LWP Relationship, EGUsphere [preprint], https://doi.org/10.5194/egusphere-2025-3850, 2025.

Christensen, Matthew [Pacific Northwest National L↗

Multiscale ACI Satellite Database

The SATELLITE_EAGLES_PNNL NetCDF dataset contains a suite of satellite- and reanalysis-derived atmospheric and surface parameters on a regular latitude–longitude grid. The dataset includes core geophysical fields such as land fraction, aerosol optical depth at multiple wavelengths (465, 550, 667, and 865 nm), sea surface temperature, estimated inversion strength, and various thermodynamic and dynamic quantities (e.g., relative humidity, vertical velocity, boundary-layer height, and surface fluxes) from both MERRA and ERA reanalysis products, provided as daily-mean and instantaneous values. A major component of the dataset consists of MODIS-retrieved cloud microphysical properties, including cloud droplet number concentration, cloud effective radius, optical thickness, and liquid water path, provided for three compositing regimes (“All,” “Q06,” and “G18”). Corresponding cloud-top parameters—temperature, height, and pressure—along with total and domain-mean cloud fraction fields are also included. The file further integrates additional satellite data from AMSR-E (for cloud water, rain water, and surface precipitation retrievals) and CERES (for top-of-atmosphere radiative fluxes, cloud fractions, and albedo). This dataset is designed to evaluate aerosol–cloud interactions in warm clouds, emphasizing the use of MODIS for deriving cloud droplet number concentration and liquid water path statistics. The complementary satellite and reanalysis fields are co-located and time-matched to the same instantaneous MODIS observations, enabling consistent comparisons between cloud properties, aerosol loading, and large-scale meteorological conditions. The dataset is recently featured in Christensen et al. (2025), Machine Learning Reveals Strong Grid-Scale Dependence in the Satellite Nd–LWP Relationship, EGUsphere [preprint], https://doi.org/10.5194/egusphere-2025-3850, 2025.

54 ENVIRONMENTAL SCIENCES↗

GEWEX (Global Energy and Water Exchanges Project): Surface Radiation Budget (SRB) Release 4 Integrated Product (IP4) - Algorithm Theoretical Basis Document and Evaluation

The World Climate Research Programme’s (WCRP) Global Energy and Water Exchanges (GEWEX) program is an integrated program of research, observations, and science activities with the mission to “Observe, understand and model the hydrological cycle and energy fluxes in the Earth’s atmosphere and at the surface.” Since the public release in 2010 of SRB Release 3, GEWEX reorganized to formulate the Data and Assessments Panel (GDAP) aimed at performing community assessments of the long-term global data products with focus on integrating various data products to address issues in the closing of the global energy and water cycles. SRB Release 4 Intergrated Product (Rel4-IP) integrates data products from the cloud, aerosol, atmosphere, ocean surface, and land surface projects within GDAP to produce a long-term time series of Top-of-Atmosphere (TOA) and surface radiative estimates. This Algorithm Theoretical Basis Document (ATBD) describes the various inputs, algorithms and resulting top-of-atmosphere and surface flux products that span from July 1983 through June 2017. Comparisons of the TOA flux products are made to overlapping CERES data products when possible. The surface radiative flux products are assessed relative to the globally distribution Baseline Surface Radiation Network measurements sites. Variability of the various products are compared to ERBE and CERES during overlapping time periods. The variability of the product show excellent correspondent to CERES during overlap years and improved statistical agreement with surface measurements. This document also discusses known issues with the data products to help the user understand the uncertainty and known issues.

Surface radiation budget↗

Petermann Glacier on the Brink: Progress, Challenges and Insights

Petermann Glacier, the largest marine-terminating glacier in northern Greenland based on catchment area and ice discharge, plays a key role in regulating ice discharge from the Greenland Ice Sheet into the Arctic Ocean. With an upstream catchment connected to the ice sheet interior via a deep subglacial canyon, its future stability has major implications for sea level rise. In this review, we synthesize recent advances in understanding Petermann’s dynamics across three critical interfaces: the ice–ocean, ice–atmosphere, and ice–bed boundaries. At the surface, observations show that reanalysis products underestimate air temperatures and melt, while regional climate models diverge significantly in their estimates of surface mass balance, underscoring the need for improved in situ data and models. At the ocean boundary, enhanced basal melting driven by both subglacial runoff and Atlantic water intrusions is identified as the dominant driver of recent mass loss of Petermann Glacier, with continued warming posing a serious threat to the stability of the floating tongue. At the bed, new geophysical synthesis reveals complex geology, likely spatial variability in geothermal heat flux, and the influence of the megacanyon on seasonal hydrology and velocity fluctuations. Petermann’s mass balance has been negative in recent decades without corresponding flow acceleration. However, the glacier has undergone significant calving events, and the current rifting that began in September 2025 highlights its vulnerability. This upcoming calving event underscores the timeliness of this review, as it will put Petermann Glacier’s terminus at its most retreated position since records began in 1923. The anticipated retreat of the ice tongue also reduces buttressing and brings the terminus closer to the grounding zone, and modeling studies suggest that calving within 12 km of the grounding zone could potentially trigger dynamic retreat, accelerating ice discharge, and a doubling of flow speeds. We conclude that improved observations, sustained monitoring of oceanographic and atmospheric properties, and high-resolution modeling are critical to constraining projections of Petermann Glacier’s future and its role in the stability of the Greenland Ice Sheet.

Dominik Fahrner↗

Validation of Surface Skin Temperature and Moisture Profiles Using Satellite Data

New validation techniques and metrics using satellite data have been developed to evaluate the quality of model-based estimates of surface skin temperature (Tg) and moisture profiles (q). The satellite data consist of clear sky outgoing long-wave radiation (CLR), broadband radiances from 8 to 12 mu (RadWn), brightness temperature centered around 10.8 mu (Tbb), and total precipitable water (TPW) from microwave radiometry. We show that CLR can be used to diagnose Tg. Furthermore, by using a combination of CLR and RadWn from CERES-TRMM measurements and TPW from SSM/I, we are able to identify errors in the moisture profile. Finally, three-hourly Tbb from the International Satellite Cloud Climatology Project can be used to evaluate the amplitude and diurnal variation of Tg. For purpose of illustration, Tg and q are evaluated from runs with an early version of the Goddard Earth Observing System Data Assimilation System (GEOS-2). It is found that, in general, Tg is too cold in the winter hemisphere and q is too wet in the upper atmosphere. In order to address these deficiencies, several improvements have been implemented into GEOS-2, including a Land-Surface-Model, a Moist Turbulence Scheme, and the assimilation of new TOVS retrievals. Preliminary results indicate positive impacts from each of these implementations.

Wu, Man Li C.↗

Initial development of a method of significant waveheight estimation for GEOS-III

The numerical method by which ocean surface significant waveheight estimates are produced from the GEOS-3 radar altimeter data is described. Four parameters characterizing the expected radar mean return waveform are determined from the altimeter's sixteen sample-and-hold waveform samplers through use of an iterative, least squares approach. One of the four parameters is a risetime term which has contributions from both the transmitted radar pulse width and the rms ocean surface height; the estimated significant waveheight is extracted from this risetime. The noise character of the estimation process leads to occasional negative significant waveheight estimates, and the origin of these nonphysical negative results is discussed. Possible modifications and areas for additional investigation are indicated.

Hayne, G. S.↗

Towards A More Realistic Representation of Nasa Ceres-Derived Surface Radiative Fluxes During Polar Night: A Comparison With the Mosaic Field Campaign

The Arctic remains one of the more difficult regions observe, and so satellite observations are a critical tool for observing the region, such as those from Clouds and the Earth’s Radiant Energy System (CERES). But validating the satellite surface radiative flux estimates is difficult because of the lack of in situ measurements. The extensive high-quality surface radiative flux and meteorological measurements collected from MOSAiC provide a useful check on flux retrievals from CERES instruments. We compare MOSAiC and CERES surface radiative fluxes during October through March of 2019-2020 using the large set of meteorological measurements also collected by MOSAiC, specifically cloud properties. Previous work identified a significant source of error in the CERES estimate of surface downwelling longwave flux as the estimate of low level cloud amount when compared with MOSAiC W-band radar measurements. Continuing this work, we examine the effects of errors in cloud water path on surface radiative fluxes. When using all cloud conditions, errors in cloud water are also significantly correlated with surface radiative flux errors, though the size off the effect is only about half that of cloud amount. But when considering low cloud conditions only, the effects of cloud water and cloud amount are comparable.

J. Brant Dodson↗

Land Water Storage within the Congo Basin Inferred from GRACE Satellite Gravity Data

GRACE satellite gravity data is used to estimate terrestrial (surface plus ground) water storage within the Congo Basin in Africa for the period of April, 2002 - May, 2006. These estimates exhibit significant seasonal (30 +/- 6 mm of equivalent water thickness) and long-term trends, the latter yielding a total loss of approximately 280 km(exp 3) of water over the 50-month span of data. We also combine GRACE and precipitation data set (CMAP, TRMM) to explore the relative contributions of the source term to the seasonal hydrological balance within the Congo Basin. We find that the seasonal water storage tends to saturate for anomalies greater than 30-44 mm of equivalent water thickness. Furthermore, precipitation contributed roughly three times the peak water storage after anomalously rainy seasons, in early 2003 and 2005, implying an approximately 60-70% loss from runoff and evapotranspiration. Finally, a comparison of residual land water storage (monthly estimates minus best-fitting trends) in the Congo and Amazon Basins shows an anticorrelation, in agreement with the 'see-saw' variability inferred by others from runoff data.

Crowley, John W.↗

Aircraft measurement of sea surface temperature during the West Coast Experiment

During the West Coast Experiment in March 1977, a test was conducted to ascertain the effectiveness of using remote sensing techniques to estimate sea surface temperature (SST) from infrared (IR) emissions of the sea surface. Aircraft flights were made over three buoys moored in southern California coastal waters, and data was collected of sea surface emissions at thermal IR wavelengths (7.95-13.5 micrometers). SST obtained from the remote sensing measurements were compared with in situ SST measured with thermistors mounted on the buoys. The remotely determined SST were from 1.4-2.9 C lower than the in situ measurements. Several factors are discussed that could account for the differences.

Schieldge, J. P.↗

Comparison of ISCCP and other cloud amounts

A new 8-year global cloud climatology has been produced by the International Satellite Cloud Climatology Project (ISCCP) that provides information every 3 h at 280-km spatial resolution covering the period from July 1983 through June 1991. If cloud detection errors and differences in area sampling are neglected, individual ISCCP cloud amounts agree with individual surface observations to within 15% rms with biases of only a few percent. When measurements of small-scale, broken clouds are isolated in the comparison, the rms differences between satellite and surface cloud amounts are about 25%, similar to the rms difference between ISCCP and Landsat determinations of cloud amount. For broken clouds, the average ISCCP cloud amounts are about 5% smaller than estimated by surface observers (difference between earth cover and sky cover), but about 5% larger than estimated from very high spatial resolution satellite observations (overestimate due to low spatial resolution offset by underestimate due to finite radiance thresholds). Detection errors caused by errors in the ISCCP clear-sky radiances or incorrect radiance threshold magnitudes, are the dominant source of error in monthly average cloud amounts. The ISCCP cloud amounts appear to be too low over land by about 10%, somewhat less in summer and somewhat more in winter, and about right (maybe slightly low) over oceans. In polar regions, ISCCP cloud amounts are probably too low by about 15%-25% in summer and 5%-10% in winter. Comparison of the ISCCP climatology to three other cloud climatologies shows excellent agreement in the geographic distribution and seasonal variation of cloud amounts; there is little agreement about day/night contrasts in cloud amount. Notable results from ISCCP are that the gobal annual mean cloud amount is about 63%, being about 23% higher over oceans than over land, that it varies by less than 1% rms from month to month, and that it has varied by about 4% on a time scale approximately equal to 2-4 years. The magnitude of interannual variations of local (280-km scale) monthly mean cloud amounts is about 7%-9%. Longitudinal contrasts in cloud amount are just as large as latitudinal contrasts. The largest seasonal variation of cloud amount occurs in the tropics, being larger in summer than in winter; the seasonal variation in the middle latitudes has the opposite phase. Polar regions may have little seasonable variability in cloud amount. The ISCCP results show slightly more nightime than daytime cloud amount over oceans and more daytime than nightime cloud amount over land.

Rossow, William B.↗

On estimating total daily evapotranspiration from remote surface temperature measurements

A method for calculating daily evapotranspiration from the daily surface energy budget using remotely sensed surface temperature and several meteorological variables is presented. Vaules of the coefficients are determined from simulations with a one-dimensional boundary layer model with vegetation cover. Model constants are obtained for vegetation and bare soil at two air temperature and wind speed levels over a range of surface roughness and wind speeds. A different means of estimating the daily evapotranspiration based on the time rate of increase of surface temperature during the morning is also considered. Both the equations using our model-derived constants and field measurements are evaluated, and a discussion of sources of error in the use of the formulation is given.

Carlson, Toby N.↗

Comparison of conventionally measured sea surface temperature and wind speed with data retrieved from satellite-borne microwave radiometry

The Scanning Multichannel Microwave Radiometer aboard both the Seasat and Nimbus-7 satellites was designed to estimate sea surface temperature (SST) and wind speed (WS) over an extended range of atmospheric conditions. The retrieval technique is described briefly, and it is demonstrated in a case study that the instrument design goals (SST:1.5 C; WS:2 m/s) appear to be feasible.

Hofer, R.↗

Estimation of tropical forest canopy temperatures, thermal response numbers, and evapotranspiration using an aircraft-based thermal sensor

Thermal infrared Multispectral Scanner (TIMS) data were collected at a resolution of 5 to 10 m from a tropical rain forest over an elevation gradient from 35 to 2700 m in the Braulio Carrillo National Park in Costa Rica. Flight lines were repeated with a 15 to 30 minute time difference for measurement of forest canopy thermal response over time. Concurrent radiosonde measurements of atmospheric profiles of air temperature and moisture provided inputs to LOWTRAN6 for atmospheric radiance corrections of the TIMS data. Techniques for using calibrated aircraft-based thermal scanner data to examine tropical forest canopy thermal properties are described. Forest canopy temperature changes over time assessed between repeated, duplicated flight lines were combined with estimates of surface radiative energy measurements from towers above the forest canopy to determine temperature spatial variability, calculate Thermal Response Numbers (TRN), and estimate evapotranspiration along the elevation gradient from selected one hectare forest inventory plots.

Luvall, Jeffrey C.↗

The Global Methane Budget 2000–2017

Understanding and quantifying the global methane (CH4) budget is important for assessing realistic pathways to mitigate climate change. Atmospheric emissions and concentrations of CH4 continue to increase, making CH4 the second most important human-influenced greenhouse gas in terms of climate forcing, after carbon dioxide (CO2). The relative importance of CH4 compared to CO2 depends on its shorter atmospheric lifetime, stronger warming potential, and variations in atmospheric growth rate over the past decade, the causes of which are still debated. Two major challenges in reducing uncertainties in the atmospheric growth rate arise from the variety of geographically overlapping CH4 sources and from the destruction of CH4 by short-lived hydroxyl radicals (OH). To address these challenges, we have established a consortium of multidisciplinary scientists under the umbrella of the Global Carbon Project to synthesize and stimulate new research aimed at improving and regularly updating the global methane budget. Following Saunois et al. (2016), we present here the second version of the living review paper dedicated to the decadal methane budget, integrating results of top-down studies (atmospheric observations within an atmospheric inverse-modelling framework) and bottom-up estimates (including process-based models for estimating land surface emissions and atmospheric chemistry, inventories of anthropogenic emissions, and data-driven extrapolations). For the 2008–2017 decade, global methane emissions are estimated by atmospheric inversions (a top-down approach) to be 576 Tg CH4/yr (range 550–594, corresponding to the minimum and maximum estimates of the model ensemble). Of this total, 359 Tg CH4/yr or ∼ 60 % is attributed to anthropogenic sources, that is emissions caused by direct human activity (i.e. anthropogenic emissions; range 336–376 Tg CH4/yr or 50 %–65 %). The mean annual total emission for the new decade (2008–2017) is 29 Tg CH4/yr larger than our estimate for the previous decade (2000–2009), and 24 Tg CH4/yr larger than the one reported in the previous budget for 2003–2012 (Saunois et al., 2016). Since 2012, global CH4 emissions have been tracking the warmest scenarios assessed by the Intergovernmental Panel on Climate Change. Bottom-up methods suggest almost 30 % larger global emissions (737 Tg CH4/yr, range 594–881) than top-down inversion methods. Indeed, bottom-up estimates for natural sources such as natural wetlands, other inland water systems, and geological sources are higher than top-down estimates. The atmospheric constraints on the top-down budget suggest that at least some of these bottom-up emissions are overestimated. The latitudinal distribution of atmospheric observation-based emissions indicates a predominance of tropical emissions (∼ 65 % of the global budget, < 30° N) compared to mid-latitudes (∼ 30 %, 30–60° N) and high northern latitudes (∼ 4 %, 60–90° N). The most important source of uncertainty in the methane budget is attributable to natural emissions, especially those from wetlands and other inland waters. Some of our global source estimates are smaller than those in previously published budgets (Saunois et al., 2016; Kirschke et al., 2013). In particular wetland emissions are about 35 Tg CH4/yr lower due to improved partition wetlands and other inland waters. Emissions from geological sources and wild animals are also found to be smaller by 7 Tg CH4/yr by 8 Tg CH4/yr, respectively. However, the overall discrepancy between bottom-up and top-down estimates has been reduced by only 5 % compared to Saunois et al. (2016), due to a higher estimate of emissions from inland waters, highlighting the need for more detailed research on emissions factors. Priorities for improving the methane budget include (i) a global, high-resolution map of water-saturated soils and inundated areas emitting methane based on a robust classification of different types of emitting habitats; (ii) further development of process-based models for inland-water emissions; (iii) intensification of methane observations at local scales (e.g., FLUXNET-CH4 measurements) and urban-scale monitoring to constrain bottom-up land surface models, and at regional scales (surface networks and satellites) to constrain atmospheric inversions; (iv) improvements of transport models and the representation of photochemical sinks in top-down inversions; and (v) development of a 3D variational inversion system using isotopic and/or co-emitted species such as ethane to improve source partitioning.

methane budget↗

A Comparison of Land Surface Model Soil Hydraulic Properties Estimated by Inverse Modeling and Pedotransfer Functions

Soil hydraulic properties (SHPs) regulate the movement of water in the soil. This in turn plays an important role in the water and energy cycles at the land surface. At present, SHPS are commonly defined by a simple pedotransfer function from soil texture class, but SHPs vary more within a texture class than between classes. To examine the impact of using soil texture class to predict SHPS, we run the Noah land surface model for a wide variety of measured SHPs. We find that across a range of vegetation cover (5 - 80% cover) and climates (250 - 900 mm mean annual precipitation), soil texture class only explains 5% of the variance expected from the real distribution of SHPs. We then show that modifying SHPs can drastically improve model performance. We compare two methods of estimating SHPs: (1) inverse method, and (2) soil texture class. Compared to texture class, inverse modeling reduces errors between measured and modeled latent heat flux from 88 to 28 w/m(exp 2). Additionally we find that with increasing vegetation cover the importance of SHPs decreases and that the van Genuchten m parameter becomes less important, while the saturated conductivity becomes more important.

Gutmann, Ethan D.↗

Downscaled GOES-R 500m Land Surface Albedo Over SAIL

This data set contains surface albedo estimates across the SAIL study area derived from the Geostationary Operational Environmental Satellite-R (GOES-R). Unlike the GOES-R surface albedo product, which is reported at 2-km resolution, this data set is produced at 500-m resolution and is produced by downscaling GOES-R data. The downscaling is performed using a "U-Net" and trained with concurrent, collocated, GOES-R surface albedo and 500-m Moderate Resolution Imaging Spectroradiometer (MODIS) blue-sky albedo derived from the MCD43A3 product.

54 ENVIRONMENTAL SCIENCES↗

Numerical Estimation of the Curvature of Biological Surfaces

Many biological systems may profitably be studied as surface phenomena. A model consisting of isotropic growth of a curved surface from a flat sheet is assumed. With such a model, the Gaussian curvature of the final surface determines whether growth rate of the surface is subharmonic or superharmonic. These properties correspond to notions of convexity and concavity, and thus to local excess growth and local deficiency of growth. In biological models where the major factors controlling surface growth are intrinsic to the surface, researchers thus gained from geometrical study information on the differential growth undergone by the surface. These ideas were applied to an analysis of the folding of the cerebral cortex, a geometrically rather complex surface growth. A numerical surface curvature technique based on an approximation to the Dupin indicatrix of the surface was developed. A metric for comparing curvature estimates is introduced, and considerable numerical testing indicated the reliability of this technique.

Todd, P. H.↗