Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shock dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Magnetohydrodynamic and Aerodynamic Assessment of Ballistic Entry of a 70deg Spherecone at Mars and Venus

An electrical conductivity database for continuum flow in a CO2 atmosphere over a 70 deg spherecone was created using the Data Parallel Line Relaxation Code computational fluid dynamics software to inform development of future magnetohydrodynamic subsystems at Venus and Mars. Sixteen freestream conditions were considered at Mars with atmospheric relative velocities from 5 to 8 km/s and altitudes between 20 and 80 km. Sixteen freestream conditions were considered at Venus with atmospheric relative velocities from 9 to 12 km/s and altitudes between 85 and 115 km. Results indicate that the total electrical conductivity in the flow volume always increases as velocity increases. At low velocities, the electrical conductivity is higher at high altitudes, while at high velocities, the electrical conductivity is higher at low altitudes. Three of the 80 km altitude computational fluid dynamics solutions show good agreement with Direct Simulation Monte Carlo results. In general, computational fluid dynamics predicts thinner shocks, higher electron number density, and similar vibrational temperatures as direct simulation Monte Carlo. The magnetohydrodynamic force was calculated at both Mars and Venus. Results indicate there may not be sufficient control authority to use magnetohydrodynamics as a trajectory control mechanism at Mars without artificially increasing the electrical conductivity of the flow, but there may be appreciable control authority for a drag-modulated aerocapture at Venus.

Destiny M Fawley↗

New Design Yields Robust Large-Area Framing Camera

Manuscript to be submitted to Review of Scientific Instruments to determine interest in possible publication. Website: https://aip.scitation.org/rsi/authors/manuscript High-speed imaging is a core diagnostic capability for the Nevada National Security Site (NNSS). Data from experiments that measure the behavior of materials under extreme conditions are essential for the stockpile mission. For example, during subcritical experiments, materials that are shocked and compressed under high-explosive drive change behavior rapidly over timescales measured in millionths or even billionths of a second. Characterizing and understanding this behavior requires radiographic and/or optical imaging to track motion on these timescales. Framing cameras provide a discrete series of images over a short period of time in a manner that mimics a high-speed movie camera, but with individual shutter times that must be extremely short in order to capture freeze-frame images of rapidly evolving phenomena such as high-explosive shock-driven ejecta, dynamic compression of metals, and high-velocity fluid flow.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

New Design Yields Robust Large-Area Framing Camera

Framing cameras provide a discrete series of images over a short period of time in a manner that mimics a high-speed movie camera, but with individual shutter times that must be extremely short in order to capture freeze-frame images of rapidly evolving phenomena such as high-explosive shock-driven ejecta, dynamic compression of metals, and high-velocity fluid flow. The NNSS has designed and fielded a new, large-area, gated framing camera called Kraken. The camera design emphasized manufacturability and flexibility by improving imager yield and creating a camera architecture to shorten design cycles. Design strategies and field data are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The Shock and Vibration Bulletin. Part 3: Structure Medium Interaction, Case Studies in Dynamics

Structure and medium interactions topics are addressed. Topics include: a failure analysis of underground concrete structures subjected to blast loadings, an optimization design procedure for concrete slabs, and a discussion of the transient response of a cylindrical shell submerged in a fluid. Case studies in dynamics are presented which include an examination of a shock isolation platform for a seasparrow launcher, a discussion of hydrofoil fatigue load environments, and an investigation of the dynamic characteristics of turbine generators and low tuned foundations.

Director of Defense Research and Engineering↗

Pump-depletion dynamics and saturation of stimulated Brillouin scattering in shock ignition relevant experiments

As an alternative inertial confinement fusion scheme, shock ignition requires a strong converging shock driven by a high-intensity laser pulse to ignite a pre-compressed fusion capsule. Understanding nonlinear laser-plasma instabilities is crucial to assess and improve the laser-shock energy coupling. Recent experiments conducted on the OMEGA EP laser facility have for the first time demonstrated that such instabilities can 100% deplete the first 0.5 ns of the high-intensity laser. Here, analyses of the observed laser-generated blast wave suggest that this pump-depletion starts at 0.02 critical density and progresses to 0.1-0.2 critical density, which is also confirmed by the time-resolved stimulated Raman backscattering spectra. The pump-depletion dynamics can be explained by the breaking of ion-acoustic waves in stimulated Brillouin scattering. Such pump-depletion would inhibit the collisional laser energy absorption but may benefit the generation of hot electrons with moderate temperatures for electron shock ignition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Secondary shock wave in laser-material interaction

In this work, the effects of shock driven process of the laser-ablated argon plume in a background gas environment are explored via molecular dynamics simulations. The primary shock wave propagation and its influence on the backward motion of the target material are delineated. It is observed that the strong pressure gradient inside the main shock wave overcomes the forward momentum of the plume and some compressed gas, leading to backward movement and redeposition on the target surface. Reflection of the backward moving gas on the target surface results in the secondary shock wave. Detailed investigation of the secondary shock wave phenomenon is provided, which gives, for the first time, an insight into formation and evolution of the internal gaseous shock at the atomistic level.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrodynamic Shaker Capability Estimation Through Experimental Dynamic Substructuring [Thesis]

Electrodynamic shaker systems are an essential tool in shock and vibration testing of dynamic environments. However, the specific performance capability of these systems is difficult to characterize. The dynamics of the shaker itself, the device under test and the specific test configuration used all couple to create a dynamic response unique to each test. Poorly predicted limitations in shaker capability affect the ability to achieve test specifications, delay testing schedules, and create difficulties for choosing test equipment. To predict shaker capability for a specific test configuration prior to setup, a lumped parameter model of the shaker system and a modal model of a device under test was developed. These models were then analytically coupled using LaGrange multiplier frequency based substructuring to estimate their coupled frequency response functions. The coupled frequency response functions were used to predict electrical inputs required to meet a given test specification. These input requirements were finally compared to a validation test using the specification and setup. Input requirements estimated using the substructuring estimated frequency response functions showed significant error. However, results using an ideal frequency response function showed very little error. These results indicate that with a better method of experimental dynamic substructuring employed it would be possible to accurately predict shaker capability for a given test configuration prior to setup.

42 ENGINEERING↗

Phase transformation in boron under shock compression

Using first-principles molecular dynamics, we calculated the equation of state and shock Hugoniot of various boron phases. Here, we find a large mismatch between Hugoniots based on existing knowledge of the equilibrium phase diagram and those measured by shock experiments, which could be reconciled if the α-B 12 /β phases are significantly over-pressurized in boron under shock compression. Our results also indicate that there exist an anomaly and negative Clapeyron slope along the melting curve of boron at 100 GPa and 1500–3000 K. These results enable an in-depth understanding of matter under shock compression, in particular the significance of compression-rate dependence of phase transitions and kinetic effects in experimental measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Principal Hugoniot of Iron-Bearing Olivine to 1465 GPa

Shock compression experiments on natural compositions are imperative to accurately model planetary accretion and the interior dynamics of planets. Combining shock compression experiments from the Sandia Z Machine and the OMEGA EP laser facility with density functional theory-based molecular dynamics calculations, we report the first pressure-density-temperature (P-ρ-T) relationship of natural iron (Fe)-bearing olivine ((Mg 0.91 Fe 0.09 ) 2 SiO 4 ) on the principal Hugoniot between 166 and 1,465 GPa. Additionally, we report the first reflectivities of natural olivine liquid in this pressure range. Compared to the magnesium-endmember forsterite (Mg 2 SiO 4 ), the presence of Fe in typical mantle abundance (~9 wt% FeO) alters the U S -u P relation of olivine. Furthermore, the shock temperature and reflectivity of olivine are indistinguishable from forsterite where experimental conditions overlap. Both forsterite and olivine increase in reflectivity (and hence optical conductivity) with increasing temperature, with a maximum reflectivity of ~31% at shock velocities greater than 22 km/s (~800 GPa).

58 GEOSCIENCES↗

SELF-CONSISTENT EVOLUTION OF GAS AND COSMIC RAYS IN CYGNUS A AND SIMILAR FR II CLASSICAL DOUBLE RADIO SOURCES

In Cygnus A and other classical FR II double radio sources, powerful opposing jets from the cores of halo-centered galaxies drive out into the surrounding cluster gas, forming hotspots of shocked and compressed cluster gas at the jet extremities. The moving hotspots are sandwiched between two shocks. An inner-facing shock receives momentum and cosmic rays from the jet and creates additional cosmic rays that form a radio lobe elongated along the jet axis. An outer-facing bow shock moves directly into the undisturbed group or cluster gas, creating a cocoon of shocked gas enclosing the radio lobe. We describe computations that follow the self-consistent dynamical evolution of the shocked cluster gas and the relativistic synchrotron-emitting gas inside the lobes. Relativistic and non-relativistic components exchange momentum by interacting with small magnetic fields having dynamically negligible energy densities. The evolution of Cygnus A is governed almost entirely by cosmic ray energy flowing from the hotspots. Mass flowing into hotspots from the jets is assumed to be small, greatly reducing the mass of gas flowing back along the jet, common in previous calculations, that would disrupt the spatial segregation of synchrotron-loss ages observed inside FR II radio lobes. We compute the evolution of the cocoon when the velocity and cosmic ray luminosity of the hotspots are constant and when they vary with time. If cosmic rays mix with cluster gas in hotspots before flowing into the radio lobe, the thermal gas is heated to mildly relativistic temperatures, producing an unobserved pressure inside the lobe.

79 ASTRONOMY AND ASTROPHYSICS↗

Temperature and density dependent pair potential for deuterium under shock

Large-scale classical molecular dynamics (CMD) simulations naturally include the microscopic physics necessary for atomistic modeling of shock release at the ablator-fuel interface in an inertial confinement fusion (ICF) capsule. Here, the multi-megabar shocks utilized in ICF experiments can drive the deuterium fuel from ambient to electron volt temperatures (T) and multi-fold compression. Modeling interatomic interactions over such an extreme range of conditions is challenging for empirical bond order potentials. We generate a pair potential for deuterium with explicit temperature and mass density dependence from ab initio density functional theory molecular dynamics using the iterative Boltzmann inversion method. This potential accurately reproduces the radial distribution functions and pressures from DFT in CMD equilibrium simulations across a wide range of thermodynamic conditions, yet fails to return the expected Hugoniot relations when used in direct CMD shock simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Shock initiation of nano-Al/Teflon: High dynamic range pyrometry measurements

In this paper, laser-launched flyer plates (25 μm thick Cu) were used to impact-initiate reactive materials consisting of 40 nm Al particles embedded in Teflon AF polymer (Al/Teflon) on sapphire substrates at a stoichiometric concentration (2.3:1 Teflon:Al), as well as one-half and one-fourth that concentration. A high dynamic range emission spectrometer was used to time and spectrally resolve the emitted light and to determine graybody temperature histories with nanosecond time resolution. At 0.5 km s -1 , first light emission was observed from Teflon, but at 0.6 km s -1 , the emission from Al/Teflon became much more intense, so we assigned the impact threshold for Al/Teflon reactions to be 0.6 (±0.1) km s -1 . The flyer plates produced a 7 ns duration steady shock drive. Emission from shocked Al/Teflon above threshold consisted of two bursts. At the higher impact velocities, the first burst started 15 ns after impact, peaked at 25 ns, and persisted for 75 ns. The second burst started at a few hundred nanoseconds and lasted until 2 μs. The 15 ns start time was exactly the time the flyer plate velocity dropped to zero after impact with sapphire. The first burst was associated with shock-triggered reactions and the second, occurring at ambient pressure, was associated with combustion of leftover material that did not react during shock. The emission spectrum was found to be a good fit to a graybody at all times, allowing temperature histories to be extracted. At 25 ns, the temperature at 0.7 km s -1 and the one-fourth Al load was 3800 K. Those temperatures increased significantly with impact velocity, up to 4600 K, but did not increase as much with Al load. A steady combustion process at 2800 (±100) K was observed in the microsecond range. Finally, the minimal dependence on Al loading indicates that these peak temperatures arise primarily from Al nanoparticles reacting almost independently, since the presence of nearby heat sources had little influence on the peak temperatures.

36 MATERIALS SCIENCE↗

Influence of edge conditions on material ejection from periodic grooves in laser shock-loaded tin

In a material subjected to high dynamic compression, the breakout of a shock wave at a rough free surface can lead to the ejection of high velocity debris. Anticipating the ballistic properties of such debris is a key safety issue in many applications involving shock loading, including pyrotechnics and inertial confinement fusion experiments. In this paper, we use laser driven shocks to investigate particle ejection from calibrated grooves of micrometric dimensions and approximately sinusoidal profile in tin samples, with various boundary conditions at the groove edges, including single groove and periodic patterns. Fast transverse shadowgraphy provides ejection velocities after shock breakout. They are found to depend not only on the groove depth and wavelength, as predicted theoretically and already observed in the past, but also, unexpectedly, on the edge conditions, with a jet tip velocity significantly lower in the case of a single groove than behind a periodic pattern.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Radiation Belt Response to Fast Reverse Shock at Geosynchronous Orbit

Fast reverse shocks (FRSs) cause the magnetosphere to expand, by contrast to the well-known compressions caused by the impact of fast forward shocks (FFS). Usually, FFSs are more geoeffective than FRSs, and consequently the inner magnetosphere dynamic responses to both shock types can be quite different. In this study, we investigate for the first time the radiation belt response to an FRS impact using multi-satellite observations and numerical simulations. Spacecraft on the dayside observed decreases in magnetic field strength and energetic (~40–475 keV) particle fluxes. Timing analysis shows that the magnetic field signature propagated from the dayside to the nightside magnetosphere. Particles with different energies vary simultaneously at each spacecraft, implying a non-dispersive particle response to the shock. Spacecraft located at lower L-shells did not record any significant signatures. The observations indicate a local time dependence of the response associated with the shock inclination, with the clearest signatures being observed in the dusk–midnight sector. Simulations underestimate the amplitude of the magnetic field variations observed on the nightside. The observed decreases in the electron intensities result from a combination of radial gradient and adiabatic effects. The radial gradients in the spectral index appear to be the dominant contributor to the observed variations of electrons seen on the dayside (near noon and dusk) and on the nightside (near midnight). This work shows that even an FRS can affect the radiation belts significantly and provides an opportunity to understand their dynamic response to a sudden expansion of the magnetosphere.

79 ASTRONOMY AND ASTROPHYSICS↗

Generation and Evolution of High-Mach-Number Laser-Driven Magnetized Collisionless Shocks in the Laboratory

Here, we present the first laboratory generation of high-Mach-number magnetized collisionless shocks created through the interaction of an expanding laser-driven plasma with a magnetized ambient plasma. Time-resolved, two-dimensional imaging of plasma density and magnetic fields shows the formation and evolution of a supercritical shock propagating at magnetosonic Mach number M ms ≈ 12. Particle-in-cell simulations constrained by experimental data further detail the shock formation and separate dynamics of the multi-ion-species ambient plasma. The results show that the shocks form on time scales as fast as one gyroperiod, aided by the efficient coupling of energy, and the generation of a magnetic barrier between the piston and ambient ions. The development of this experimental platform complements present remote sensing and spacecraft observations, and opens the way for controlled laboratory investigations of high-Mach number collisionless shocks, including the mechanisms and efficiency of particle acceleration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Shock physics and shadowgraphic measurements of laser-produced cerium plasmas

Shadowgraphic measurements are combined with theory on gas-dynamics to investigate the shock physics associated with nanosecond laser ablation of cerium metal targets. Time-resolved shadowgraphic imaging is performed to measure the propagation and attenuation of the laser-induced shockwave through air and argon atmospheres at various background pressures, where stronger shockwaves characterized by higher propagation velocities are observed for higher ablation laser irradiances and lower pressures. The Rankine-Hugoniot relations are also employed to estimate the pressure, temperature, density, and flow velocity of the shock-heated gas located immediately behind the shock front, predicting larger pressure ratios and higher temperatures for stronger laser-induced shockwaves.

42 ENGINEERING↗

Properties of warm dense polystyrene plasmas along the principal Hugoniot

Polystyrene (CH) is often chosen as the ablator material for inertial confinement fusion (ICF) targets. Its static, dynamical, and optical properties in warm, dense conditions (due to shock compression) are important for ICF designs. Using the first-principles quantum molecular dynamics (QMD) method, we have investigated the equation of state (EOS) and optical reflectivity of shock-compressed CH up to an unprecedentedly high pressure of 62 Mbar along the principal Hugoniot. The QMD results are compared with existing experimental measurements as well as the SESAME EOS model. Although the Hugoniot pressure and/or temperature from QMD calculations agrees with experiments and the SESAME EOS model at low pressures below 10 Mbar, we have identified for the first time a stiffer behavior of shocked CH at higher pressures (>10 Mbar). Such a stiffer behavior of warm, dense CH can affect the ablation pressure (shock strength), shock coalescence dynamics, and nonuniformity growth in ICF implosions. In addition, we corrected the mistake made in literature for calculating the reflectivity of shocked CH and obtained good agreements with experimental measurements, which should lend credence to future opacity calculations in a first-principles fashion.

Hu, S. X.↗