Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shape analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

On the mechanics of filament winding. I - A generalized model

In this paper the filament winding process was analyzed to relate process variables to structural parameters. An analytical model has been developed for a filament wound preform by determining the necessary geometric and kinematic conditions. An equation of motion of winding was developed to predict layer by layer geometry using the mandrel shape as the initial boundary condition. This model provides the laws of motion of the traverse stroke relative to the mandrel to ensure that the filament laydown is of the predetermined geodesic path over the mandrel, that the winding density is distributed over the mandrel in the prearranged manner, and that the winding build is being formed to reproduce the preassigned shape or contour of the preform. From this analysis, the winding process parameters can be controlled accordingly to produce any given shape. The analytical model was used to produce computer simulation of the winding process. The dynamic simulation of the winding process visualizes and inspects the layer by layer path of the tow and provides process variables required to produce preforms of optimum structural parameters.

Hamouda, Hechmi↗
DOE OSTI2022

Novel Tube Design for Superheater Heat Exchanger Enabled Via Additive Manufacturing

Superheater tubes are critical boiler components that operate at relatively higher temperatures and pressure. Amongst the primary concerns for these tubes is the deposition of ash particles on the tube surface, leading to the reduced thickness of the tube due to material corrosion, consequently causing early creep failure of the component. In this research, a novel tube design has been proposed which resembles a teardrop or ogive shape to reduce the drag and concurrently improve the creep life of the superheater tubes. To administer the practicality of novel tubes, metal additive manufacturing (AM), for instance, laser-powder bed fusion (L-PBF), has been proposed. These unconventional designs were assessed and compared with the baseline circular tube design for mechanical design requirements (hoop stress and creep life) and the particle and flue gas flow characteristics around the differently shaped tubes. A thermomechanical finite element (FE) analysis was performed for hoop stress calculations. This study also emphasizes on effect of circumferential thermal variation on hoop stress distribution in tubes. Therefore, a detailed two-dimensional (2D) thermal simulation has been performed to report the circumferential thermal variation on the tube. A computational fluid dynamics (CFD) analysis coupled with particle tracing was performed for gas flow visualization and particle tracing around the proposed shapes and baseline circular-shaped tube design. The Schlieren optic setup was built and leveraged for qualitative validation of the proposed design. The complete design methodology established in the paper shows teardrop-shaped tubes better in terms of drag and creep life in contrast to the circular-shaped tube.

42 ENGINEERING↗
NASA NTRS1996

Aerodynamic shape optimization using control theory

Aerodynamic shape design has long persisted as a difficult scientific challenge due its highly nonlinear flow physics and daunting geometric complexity. However, with the emergence of Computational Fluid Dynamics (CFD) it has become possible to make accurate predictions of flows which are not dominated by viscous effects. It is thus worthwhile to explore the extension of CFD methods for flow analysis to the treatment of aerodynamic shape design. Two new aerodynamic shape design methods are developed which combine existing CFD technology, optimal control theory, and numerical optimization techniques. Flow analysis methods for the potential flow equation and the Euler equations form the basis of the two respective design methods. In each case, optimal control theory is used to derive the adjoint differential equations, the solution of which provides the necessary gradient information to a numerical optimization method much more efficiently then by conventional finite differencing. Each technique uses a quasi-Newton numerical optimization algorithm to drive an aerodynamic objective function toward a minimum. An analytic grid perturbation method is developed to modify body fitted meshes to accommodate shape changes during the design process. Both Hicks-Henne perturbation functions and B-spline control points are explored as suitable design variables. The new methods prove to be computationally efficient and robust, and can be used for practical airfoil design including geometric and aerodynamic constraints. Objective functions are chosen to allow both inverse design to a target pressure distribution and wave drag minimization. Several design cases are presented for each method illustrating its practicality and efficiency. These include non-lifting and lifting airfoils operating at both subsonic and transonic conditions.

Reuther, James↗
DOE OSTI2022

Effect of applied potential on metal surfaces: Surface energy, Wulff shape and charge distribution

Here we use grand canonical density functional theory to predict the surface energies, Wulff shapes, charge distributions and catalytically active sites of different metal surfaces under electrochemical conditions. We propose a method for computing surface energies from grand canonical density functional theory (GC-DFT) calculations of periodic slab models and use it to compute the surface energies of the facets of Pt, Cu, and Ag crystals to predict their Wulff shapes under electrochemical conditions. GC-DFT predicts that, for the pure metals studied, solvation only slightly affects the Wulff shape while applied potentials considerably affect the surface energies and corresponding Wulff shapes. We used Bader charge analysis of GC-DFT computed electron densities to investigate the effect of applied potential on the distribution of electron density over the atoms of the surfaces of Pt, Cu, Ag, and the 75–25 Ag-Pt and Au-Ni alloys. This analysis shows that, under an applied potential, the electron density is unevenly distributed over the surface atoms and that the charges of atoms more exposed to solvent are more sensitive to bias. Our results show that the most sensitive atom to bias can be used to identify the most favorable adsorption site and thus, the active sites of electrochemical reactions, which is computationally less demanding than calculating the adsorption energies on all possible adsorption sites.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Intrepid MCMC: Metropolis-Hastings with exploration

In engineering examples, one often encounters the need to sample from unnormalized distributions with complex shapes that may also be implicitly defined through a physical or numerical simulation model, making it computationally expensive to evaluate the associated density function. For such cases, MCMC has proven to be an invaluable tool. Random-walk Metropolis Methods (also known as Metropolis-Hastings (MH)), in particular, are highly popular for their simplicity, flexibility, and ease of implementation. However, most MH algorithms suffer from significant limitations when attempting to sample from distributions with multiple modes (particularly disconnected ones). Here, in this paper, we present Intrepid MCMC - a novel MH scheme that utilizes a simple coordinate transformation to significantly improve the mode-finding ability and convergence rate to the target distribution of random-walk Markov chains while retaining most of the simplicity of the vanilla MH paradigm. Through multiple examples, we showcase the improvement in the performance of Intrepid MCMC over vanilla MH for a wide variety of target distribution shapes. We also provide an analysis of the mixing behavior of the Intrepid Markov chain, as well as the efficiency of our algorithm for increasing dimensions. A thorough discussion is presented on the practical implementation of the Intrepid MCMC algorithm. Finally, its utility is highlighted through a Bayesian parameter inference problem for a two-degree-of-freedom oscillator under free vibration.

97 - MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Experimentally validated high-fidelity simulations of a liquid jet in supersonic crossflow

Here, utilizing recent advancements in computational schemes for compressible, multiphase flows, this work features a parametric study of a pure liquid jet in supersonic crossflow that involves simulating the atomization process for four values of momentum-flux ratio. These simulations are validated against experimental results measured with high-speed X-ray imaging, which confirm the accuracy of the numerical approach. Also, the effect of numerical resolution on some flow behavior is investigated, revealing convergence of the jet shape and surface instability wavelength. Analysis of the resulting sprays includes statistical descriptions of the liquid distribution, liquid structures created through breakup, interfacial instabilities, and dominant flow features. As the flowrate increases, the spray penetrates further, it becomes more disperse, and less liquid impacts the wall, but the droplet size distribution changes little. The wavelength of instabilities on the windward side of the jet diverges from measured trends in subsonic crossflows. In a visualization of the time-averaged flow, counter-rotating vortices are observed along the jet core and in the wake, affecting the process of primary atomization and early droplet trajectories.

42 ENGINEERING↗
DOE OSTI2020

Coordinated operation of electricity and natural gas systems from day-ahead to real-time markets

Power systems worldwide are becoming more reliant on energy from natural gas, wind, and solar, posing possible reliability and coordination challenges from the tighter coupling of these infrastructure systems. This paper proposes a framework for the market-based coordination of electricity and natural gas system operations. The proposed framework includes a power system model that accounts for flexibility in the commitment of power plants with short start-up and shut-down times, coupled with a dynamic gas model that simulates when gas cannot be delivered to generators. The capabilities of the framework are illustrated using real-world electric power and gas systems, including scenarios around wind and solar penetrations and the analysis of time-variant, “shaped flow” gas nominations. Our results indicate that coordination between power and gas systems improves total gas delivery and reduces out-of-merit order dispatch in the electricity system, and that shaped flows may reduce unserved gas in systems with high penetrations of wind and solar. Coordination can have mixed effects on carbon-dioxide emissions, with emissions increasing with coordination for current systems during high load weeks but decreasing for systems with high renewable penetrations, particularly during periods of high variability.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Isolating intermediate Mg 11 Cu 6 Al 12 phase in ternary Mg-Cu-Al alloy by electrolytic dealloying

While dealloying is widely used to create nanoporous materials, it has rarely been employed to isolate difficult-to-synthesize intermediate phases. Here, in this work, we show how air-free, electrolytic dealloying at room temperature can be used to isolate the ternary intermetallic Mg 11 Cu 6 Al 12 phase. We create a ternary Mg-Cu-Al parent alloy containing the Mg 11 Cu 6 Al 12 compound and other phases, then subsequently remove these other phases via electrolytic dealloying to isolate the Mg 11 Cu 6 Al 12 phase. Isolated Mg 11 Cu 6 Al 12 phase exhibits ≈1 μm diameter rod-shaped microstructure. Phase and chemical analysis conducted using various techniques, including inductively coupled plasma and lab and synchrotron-based X-ray diffraction, show minimal impurities. This new approach to isolate the Mg 11 Cu 6 Al 12 phase can unlock its use in fundamental research and can be applied to other difficult-to-synthesize intermetallic compounds.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The Electron Spectro-Microscopy (ESM) Beamline at NSLS-II

Photoelectron spectroscopy is a primary tool for the study of the electronic structure of materials and the chemical composition of surfaces. High-resolution angle-resolved photoemission spectroscopy (ARPES) has the unique ability to map the energy bands in momentum space. Furthermore, going beyond the single particle picture, the self-energy corrections caused by correlations in solids can be extracted from the analysis of the emission line shape. The current level of refinement, in terms of energy and angular resolution (ΔE < 1 meV, Δθ < 0.1°), makes the technique sensitive to the lowest energy excitations and the dynamics of electrons, which in turn virtually determine all the macroscopic properties of any system and govern the chemical, electrical, magnetic, and physical processes. Similarly important, X-ray photoelectron microscopy (XPEEM), combined with the low-energy electron microscopy (LEEM), is indispensable in probing the complexity of chemical, structural, electronic and magnetic properties of surfaces and shallow interfaces, with the spatial resolution of few tens of nanometer (nm). The Electron-Spectro-Microscopy beamline (ESM) has been recently commissioned at NSLS-II and is now in operation. The primary spectroscopic technique is photoemission, performed over a wide energy range with control of light polarization and in a variety of flux/resolution conditions. The beamline has two experimental end stations that allow to perform ARPES and XPEEM/LEEM, separately. The ARPES end station focuses on high energy-resolution work, with spot-size of a few microns. The XPEEM/LEEM end station is a full-field microscope (XPEEM) operating either with the synchrotron generated X-rays (XPEEM), or with an internal electron gun (LEEM). Spatial resolution is crucial in studies of newly synthesized complex materials since they are often initially available only as small specimens (typically micron size). Furthermore, chemical inhomogeneities on surfaces are often an integral part of surface chemical processes. Finally, the ESM beamline with X-ray spots of few microns is optimized to study the electronic structure of novel materials with microscopy capabilities.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Observation of paramagnetic spin-degeneracy lifting in EuZn 2 Sb 2

Taken together, time-reversal and spatial inversion symmetries impose a twofold spin degeneracy of the electronic states in crystals. In centrosymmetric materials, this degeneracy can be lifted by introducing magnetism, either via an externally applied field or through internal magnetization. However, a correlated alignment of spins, even in the paramagnetic phase, can lift the spin degeneracy of electronic states. Here, we report an in-depth study of the electronic band structure of the Eu-ternary pnictide EuZn 2 Sb 2 through a combination of high-resolution angle-resolved photoemission spectroscopy measurements and first-principles calculations. An analysis of the photoemission line shapes over a range of incident photon energies and sample temperatures is shown to reveal the presence of band spin-degeneracy lifting in the paramagnetic phase. Our angle-resolved photoemission spectroscopy results are in good agreement with theoretical ferromagnetic-phase calculations, which indicates the importance of ferromagnetic fluctuations in the system. Through our calculations, we predict that spin-polarized bands in EuZn 2 Sb 2 generate a single pair of Weyl nodes. Our observation of band splittingin EuZn 2 Sb 2 provides a key step toward realizing time-reversal symmetry breaking physics in the absence of long-range magnetic order.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Catalyst-Vision (PEM Catalyst Layer Image Analysis Tool) [SWR-25-100]

Catalyst-Vision (PEM Catalyst Layer Image Analysis Tool) provides an advanced Python-based tool, primarily designed for use in a Jupyter/Colab notebook, for the quantitative morphological analysis of pre-segmented shapes. While developed for analyzing PEM catalyst layers from microscopy, its methodology is suitable for characterizing any grayscale object provided on a uniform white background. The tool uses a robust computer vision pipeline based on the Euclidean Distance Transform and skeletonization to accurately measure local thickness and tortuosity, providing a comprehensive characterization of an object's geometry and internal texture. If you find this code useful, please cite our preprint as: Chan, Ai-Lin and Hayden, Steven and Harvey, Steven P. and Smeaton, Michelle and Okrucky, Caleb and Watt, John and Ulična, Soňa and Spurgeon, Steven and Jungjohann, Katherine and Alia, Shaun, Mechanism-informed breakdown: understanding degradation by controlling voltage hold patterns in PEM water electrolyzers. Preprint (2025).

Spurgeon, Steven [National Laboratory of the Rocki↗
DOE OSTI2023

Assessing the Influence of Climate on the Spatial Pattern of West Nile Virus Incidence in the United States

West Nile virus (WNV) is the leading cause of mosquito-borne disease in humans in the United States. Since the introduction of the disease in 1999, incidence levels have stabilized in many regions, allowing for analysis of climate conditions that shape the spatial structure of disease incidence. Our goal was to identify the seasonal climate variables that influence the spatial extent and magnitude of WNV incidence in humans. We developed a predictive model of contemporary mean annual WNV incidence using U.S. county-level case reports from 2005 to 2019 and seasonally averaged climate variables. We used a random forest model that had an out-of-sample model performance of R 2 =0.61. Our model accurately captured the V-shaped area of higher WNV incidence that extends from states on the Canadian border south through the middle of the Great Plains. It also captured a region of moderate WNV incidence in the southern Mississippi Valley. The highest levels of WNV incidence were in regions with dry and cold winters and wet and mild summers. The random forest model classified counties with average winter precipitation levels <23.3 mm/month as having incidence levels over 11 times greater than those of counties that are wetter. Among the climate predictors, winter precipitation, fall precipitation, and winter temperature were the three most important predictive variables. We consider which aspects of the WNV transmission cycle climate conditions may benefit the most and argued that dry and cold winters are climate conditions optimal for the mosquito species key to amplifying WNV transmission. Our statistical model may be useful in projecting shifts in WNV risk in response to climate change.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

ComStock Measure Scenario Documentation: Reduced Thermostat Setbacks for Heat Pumps

This report provides documentation of a measure for the End Use Savings Shapes project, which consists of analysis of different energy efficiency and renewable energy measures on the commercial building stock, using NREL's ComStock tool. The measure consists of a reduction in thermostat setbacks for air-source heat pump RTUs.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Use of Gas Adsorption and Inversion Methods for Shale Pore Structure Characterization

The analysis of porosity and pore structure of shale rocks has received special attention in the last decades as unconventional reservoir hydrocarbons have become a larger parcel of the oil and gas market. A variety of techniques are available to provide a satisfactory description of these porous media. Some techniques are based on saturating the porous rock with a fluid to probe the pore structure. In this sense, gases have played an important role in porosity and pore structure characterization, particularly for the analysis of pore size and shapes and storage or intake capacity. In this review, we discuss the use of various gases, with emphasis on N2 and CO2, for characterization of shale pore architecture. We describe the state of the art on the related inversion methods for processing the corresponding isotherms and the procedure to obtain surface area and pore-size distribution. The state of the art is based on the collation of publications in the last 10 years. Limitations of the gas adsorption technique and the associated inversion methods as well as the most suitable scenario for its application are presented in this review. Finally, we discuss the future of gas adsorption for shale characterization, which we believe will rely on hybridization with other techniques to overcome some of the limitations.

04 OIL SHALES AND TAR SANDS↗
NASA NTRS1973

An experimental investigation of vortex stability, tip shapes, compressibility, and noise for hovering model rotors

Schlieren methods of flow visualization and hot-wire anemometry for velocity measurements were used to investigate the wakes generated by hovering model propellers and rotors. The research program was directed toward investigating (1) the stability of the tip vortex, (2) the effects produced by various tip shapes on performance and tip vortex characteristics, and (3) the shock formation and noise characteristics associated with various tip shapes. A free-wake analysis was also conducted for comparison with the vortex stability experimental results. Schlieren photographs showing wake asymmetry, interaction, and instability are presented along with a discussion of the effects produced by the number of blades, collective pitch, and tip speed. Two hot-wire anemometer techniques, used to measure the maximum circumferential velocity in the tip vortex, are discussed.

Tangler, J. L.↗
NASA NTRS1979

Rotary balance data for a typical single-engine general aviation design for an angle-of-attack range of 8 deg to 90 deg. 2: High-wing model A

Aerodynamic characteristics obtained in a rotational flow environment utilizing a rotary balance located in the Langley spin tunnel are presented in plotted form for a 1/5-scale, single-engine, high-wing, general aviation airplane model. The configurations tested included various tail designs and fuselage shapes. Data are presented without analysis for an angle of attack range of 8 to 90 degrees and clockwise and counter-clockwise rotations covering an Omega b/2 v range from 0 to 0.85.

Mulcay, W.↗
NASA NTRS1983

Line strength measurements using diode lasers - The nu2 band of H2S

The strengths of 94 lines in the nu2 band of H2S have been measured with an average accuracy of 3 percent using a tunable diode laser. The line strengths are determined from the peak absorption of nearly Doppler-shaped lines. A detailed error analysis of this measurement method is given. Ratios of the measured line strengths to strengths calculated assuming no vibration-rotation interactions are shown to range from as low as 0.057 to as high as 4.71.

Strow, L. L.↗