SEARCH · Engineering Papers

Results for “Selection pressure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

All sources NASA NTRS DOE OSTI

NASA NTRS1983

The coal-fired gas turbine locomotive - A new look

Advances in turbomachine technology and novel methods of coal combustion may have made possible the development of a competitive coal fired gas turbine locomotive engine. Of the combustor, thermodynamic cycle, and turbine combinations presently assessed, an external combustion closed cycle regenerative gas turbine with a fluidized bed coal combustor is judged to be the best suited for locomotive requirements. Some merit is also discerned in external combustion open cycle regenerative systems and internal combustion open cycle regenerative gas turbine systems employing a coal gasifier. The choice of an open or closed cycle depends on the selection of a working fluid and the relative advantages of loop pressurization, with air being the most attractive closed cycle working fluid on the basis of cost.

Liddle, S. G.↗

NASA NTRS1984

Role of fuel chemical properties on combustor radiative heat load

In an attempt to rigorously study the fuel chemical property influence on combustor radiative heat load, UTRC has conducted an experimental program using 25 test fuels. The burner was a 12.7-cm dia cylindrical device fueled by a single pressure-atomizing injector. Fuel physical properties were de-emphasized by selecting injectors which produced highly-atomized, and hence rapidly-vaporizing sprays. The fuels were specified to cover the following wide ranges of chemical properties: hydrogen, 9.1 to 15- (wt) pct; total aromatics, 0 to 100 (vol) pct; and naphthalene, 0 to 30 (vol) pct. They included standard fuels, specialty products and fuel blends. Fuel naphthalene content exhibited the strongest influence on radiation of the chemical properties investigated. Smoke point was a good global indicator of radiation severity.

Rosfjord, T. J.↗

NASA NTRS1985

TRO-2D - A code for rational transonic aerodynamic optimization

Features and sample applications of the transonic rational optimization (TRO-2D) code are outlined. TRO-2D includes the airfoil analysis code FLO-36, the CONMIN optimization code and a rational approach to defining aero-function shapes for geometry modification. The program is part of an effort to develop an aerodynamically smart optimizer that will simplify and shorten the design process. The user has a selection of drag minimization and associated minimum lift, moment, and the pressure distribution, a choice among 14 resident aero-function shapes, and options on aerodynamic and geometric constraints. Design variables such as the angle of attack, leading edge radius and camber, shock strength and movement, supersonic pressure plateau control, etc., are discussed. The results of calculations of a reduced leading edge camber transonic airfoil and an airfoil with a natural laminar flow are provided, showing that only four design variables need be specified to obtain satisfactory results.

Davis, W. H., Jr.↗

NASA NTRS1985

Visceral predictors of cardiovascular deconditioning in late middle-aged men

A number of visceral and behavioral factors connected with cardiovascular deconditioning were investigated, in order to identify a method for predicting the degree of orthostatic intolerance to spaceflight in several late-middle-aged men (55-65 years). Preliminary measurements were made of: mean arterial blood pressure plasma cortisol levels; and norepinephrine levels. Measurements of core temperature; plasma epinephrine level and subjective arousal from sleep were also obtained. Pairwise correlations were found for each of the variables and the time-to-blackout due centrifugal acceleration of up to +3 Gz. It is shown that the men with relatively low resting blood pressure were at greater risk of developing the clinical signs of cardiovascular deconditioning than were the men with higher basal blood pressure. Some applications of the experimental results to the development of selection criteria for Shuttle crews are discussed.

Goldwater, D. J.↗

NASA NTRS1984

Role of fuel chemical properties on combustor radiative heat load

In an attempt to rigorously study the fuel chemical property influence on combustor radiative heat load, United Technologies Research Center (UTRC) has conducted an experimental program using 25 test fuels. The burner was a 12.7-cm dia cylindrical device fueled by a single pressure-atomizing injector. Fuel physical properties were de-emphasized by selecting injectors which produced high-atomized, and hence rapidly-vaporizing sprays. The fuels were specified to cover the following wide ranges of chemical properties; hydrogen, 9.1 to 15- (wt) pct; total aromatics, 0 to 100 (vol) pct; and naphthalene, 0 to 30 (vol) pct. They included standard fuels, specialty products and fuel blends. Fuel naphthalene content exhibited the strongest influence on radiation of the chemical properties investigated. Smoke point was a good global indicator of radiation severity.

Rosfjord, T. J.↗

NASA NTRS1987

Pressure-Localizing Inserts for Bagging Laminations

Devices compress composite laminates to conform to tight inside corners of molds. Proposed use of pressure-localizing insert allows composite laminates to be compacted into tight corners by conventional pressure or vacuum-bagging techniques. Because of manufacturing technique, larger selection of part shapes becomes amenable to lamination.

Schmaling, Dave↗

NASA NTRS1940

Experimental Results with Airfoils Tested in the High-speed Tunnel at Guidonia

The results are presented of a triple series of tests using force measurements, pressure-distribution measurements, and air flow photographs on airfoil sections suitably selected so that comparison could be made between the experimental and theoretical results. The comparison with existing theory is followed by a discussion of the divergences found, and an attempt is made to find their explanation.

Ferri, Antonio↗

NASA NTRS1994

Gravity and the Adaptation of Form and Function in Lower Vertebrates

Comparative data emphasizing lower vertebrates will be used to justify the following generalized conclusions or expectations: 1) Gravitational stress produces adaptive increases in arterial pressure. 2) Gravitational stress produces adaptive reorganization of anatomy. 3) Natural selection favors small body size in high G-stress environments. 4) Gravitational stress produces low-compliant perivascular tissues (morphological antigravity suit). 5) Gradients or regional zonation of vascular characters evolve along the length of elongate vertebrates living in high G-stress environments. Presentation of information will include new data gathered by the author and Dr. Alan Hargens while the author was a NRC Senior Research Associate at NASA Ames Research Center. While there is no published abstract provided at the meeting, a symposium manuscript will be published in a special volume of Journal of Experimental Zoology.

Lillywhite, Harvey B.↗

NASA NTRS2002

Low-Speed Fan Noise Reduction With Trailing Edge Blowing

An experimental proof-of-concept test was conducted to demonstrate reduction of rotor-stator interaction noise through rotor-trailing edge blowing. The velocity deficit from the viscous wake of the rotor blades was reduced by injecting air into the wake from a trailing edge slot. Composite hollow rotor blades with internal flow passages were designed based on analytical codes modeling the internal flow. The hollow blade with interior guide vanes creates flow channels through which externally supplied air flows from the root of the blade to the trailing edge. The impact of the rotor wake-stator interaction on the acoustics was also predicted analytically. The Active Noise Control Fan, located at the NASA Glenn Research Center, was used as the proof- of-concept test bed. In-duct mode and farfield directivity acoustic data were acquired at blowing rates (defined as mass supplied to trailing edge blowing system divided by fan mass flow) ranging from 0.5 to 2.0 percent. The first three blade passing frequency harmonics at fan rotational speeds of 1700 to 1900 rpm were analyzed. The acoustic tone power levels (PWL) in the inlet and exhaust were reduced 11.5 and -0.1, 7.2 and 11.4, 11.8 and 19.4 PWL dB, respectively. The farfield tone power levels at the first three harmonics were reduced 5.4, 10.6, and 12.4 dB PWL. At selected conditions, two-component hotwire and stator vane unsteady surface pressures were acquired. These measurements illustrate the physics behind the noise reduction.

Sutliff, Daniel L.↗

NASA NTRS2011

Thermal Protection Materials

Thermal protection materials and systems (TPS) are required to protect a vehicle returning from space or entering an atmosphere. The selection of the material depends on the heat flux, heat load, pressure, and shear and other mechanical loads imposed on the material, which are in turn determined by the vehicle configuration and size, location on the vehicle, speed, a trajectory, and the atmosphere. In all cases the goal is to use a material that is both reliable and efficient for the application. Reliable materials are well understood and have sufficient test data under the appropriate conditions to provide confidence in their performance. Efficiency relates to the behavior of a material under the specific conditions that it encounters TPS that performs very well at high heat fluxes may not be efficient at lower heat fluxes. Mass of the TPS is a critical element of efficiency. This talk will review the major classes of TPS, reusable or insulating materials and ablators. Ultra high temperature ceramics for sharp leading edges will also be reviewed. The talk will focus on the properties and behavior of these materials.

Johnson, Sylvia M.↗

NASA NTRSDate not supplied

Angle-of-Attack Sweep with Mesh Adaptation for High-Lift Configurations

This paper reports an angle-of-attack (alpha) sweep study with mesh adaptation for the high-lift configuration - JAXA Standard Model (JSM) from the 3rd AIAA High-Lift Prediction Workshop. The method of angle-of-attack (alpha) continuation, where the flow-field at a certain angle of attack is initialized from the solution obtained at the previous angle of attack, is applied to adapted unstructured meshes. Since the meshes are continuously adapted, flow-field initialization on a particular mesh for a certain angle is done through linear interpolation of the solution from the previous mesh. Interpolated initial conditions usually prevent massively separated solutions that may otherwise occur with impulsive initial conditions. Alpha continuations are done in both forward (increasing alpha) and reverse (decreasing alpha) directions, resulting in the formation of hysteresis loops. Skin frictions are compared with the wind-tunnel oil flow images and pressure coefficients are compared with the wind-tunnel values, at selected angles of attack. Final paper will include results also for the high-lift version of the Common Research Model (CRM-HL) from the 4th AIAA High-Lift Prediction Workshop. A thorough comparison of the results will also be made with the available wind-tunnel data.

Mesh Adaptation↗

NASA NTRS2022

Spacecraft Maximum Allowable Concentrations for Airborne Contaminants: Revision B

The enclosed table lists official Spacecraft Maximum Allowable Concentrations (SMACs) for selected airborne contaminants. They are based upon experiments conducted at standard pressure and oxygen environments and may or may not be applicable to altered atmospheres. These are guideline values set by the National Aeronautics and Space Administration (NASA)/Johnson Space Center (JSC) Toxicology Group in cooperation with the National Research Council Committee on Toxicology (NRCCOT) or through publication in the peer-reviewed scientific literature. Based on documented guidance (NRC, 1992; NRC, 2016), NASA has established SMACs for 60 chemical compounds that are particularly relevant to atmospheric contamination of the International Space Station (ISS) and targets of Exploration. Some long‐term limits (1000‐days) have also been established to support manned deep‐space exploration. Summaries of these SMACs are presented in tabular form as part of this publication. Short-term (1- and 24-hour) SMACs apply to off nominal situations, such as accidental releases aboard a spacecraft. These limits permit risk of minor, reversible effects, such as mild mucosal irritation. In contrast, the long term SMACs are set to fully protect healthy crewmembers from adverse effects resulting from continuous exposure to specific air pollutants for up to 1000 days. Because allergic reactions or chemical idiosyncrasy to certain airborne pollutants are very difficult to predict, crewmembers with allergies or unusual sensitivity to trace pollutants may not be afforded complete protection, even when long-term SMACs are not exceeded. Conversely, exceedance of a SMAC does not mean that health impairment is certain (there are many other factors that influence ultimate health outcomes), although it does indicate that the crew may be subject to increased risks that must be closely evaluated. Environmental pollutant control to mitigate exposure will likely be triggered.

SMACs↗

NASA NTRS2024

Spacecraft Maximum Allowable Concentrations for Airborne Contaminants: Revision C

The enclosed table lists official Spacecraft Maximum Allowable Concentrations (SMACs) for selected airborne contaminants. They are based upon experiments conducted at standard pressure and oxygen environments and may or may not be applicable to altered atmospheres. The values listed in this summary document are applicable only to ambient conditions at standard temperature and oxygen (14.7 psi and 21% O2 at 25°C). These are guideline values set by the National Aeronautics and Space Administration (NASA)/Johnson Space Center (JSC) Toxicology Group in cooperation with the National Research Council Committee on Toxicology (NRCCOT), through publication in the peer- reviewed scientific literature, or NASA Technical Memoranda. Based on documented guidance (NRC, 1992; NRC, 2016), NASA has established SMACs for 58 chemical compounds that are particularly relevant to atmospheric contamination of the International Space Station (ISS) and targets of Exploration. Some long-term limits (1000-days) have also been established to support manned deep-space exploration. Summaries of these SMACs are presented in tabular form as part of this publication. This document provides a tabular summary of values that have been previously established based on guidelines established by NASA and the National Research Council’s Committee on Toxicology and vetted and published through the NRCCOT and/or non-NASA scientific literature and NASA Technical Memoranda. Short‐term (1‐ and 24‐hour) SMACs apply to off‐nominal situations, such as accidental releases aboard a spacecraft. These limits permit risk of minor, reversible effects, such as mild mucosal irritation. In contrast, the long‐term SMACs are set to fully protect healthy crewmembers from adverse effects resulting from continuous exposure to specific air pollutants for up to 1000 days. Because allergic reactions or chemical idiosyncrasy to certain airborne pollutants are very difficult to predict, crewmembers with allergies or unusual sensitivity to trace pollutants may not be afforded complete protection, even when long‐term SMACs are not exceeded.

SMACs↗

NASA NTRSDate not supplied

An Evaluation of Composite Primary Structure for Habitat Modules

Boeing studied the use of composite structures in deep space habitats. Compared to metallic modules, composite structures offer increased strength and stiffness with reduced mass. The study evaluated the design considerations and the mass benefits of an all composite primary structure. The composite module design included a continuous pressure shell, composite longerons, and circumferential ring frames. The composite material selected was a high strength carbon fiber and epoxy slit tape prepreg. The manufacturing involved automated fiber placement and utilizing existing facilities and autoclaves. Analysis showed a 33% reduction in primary structure mass and an overall net reduction of nearly 1900 kg compared to metallic modules. The composite module demonstrated improved mass efficiency and opens new possibilities for mission performance in deep space exploration.

Composite↗

NASA NTRS1993

Performance of high-recovery recycling reverse osmosis with wash water

Inclusion of a recycling loop for partially-desalted water from second-stage reverse-osmosis permeate has been shown useful for achieving high-recovery at moderate applied pressures. This approach has now been applied to simulated wash waters, to obtain data on retention by the membranes of solutes in a mixture comparable to anticipated spacecraft hygiene wastewaters, and to generate an estimate of the maximum concentration that can be expected without causing membrane fouling. A first experiment set provides selectivity information from a single membrane and an Igepon detergent, as a function of final concentration. A reject concentration of 3.1% Total Organic Carbon has been reached, at a pressure of 1.4 Mega Pascals, without membrane fouling. Further experiments have generated selectivity values for the recycle configuration from two washwater simulations, as a function of applied pump pressure. Reverse osmosis removal has also been tested for washwater containing detergent formulated for plant growth compatibility (containing nitrogen, phosphorous and potassium functional groups.)

Herrmann, Cal C.↗

NASA NTRS1972

Determination of contamination character of materials in space technology testing

The contamination character of selected materials used in space technology testing is presented. Many of these materials contain components that become volatile in a space environment. Most previous data were limited to weight loss or vapor pressure. However, these parameters are not necessarily a direct measure of the contamination character of these materials. Selected materials were exposed to a thermal-vacuum environment, and the degree of contamination was measured by collecting the outgases from these materials on a cold test mirror surface. The degradation of reflectivity of the mirror was measured over a spectral range from 1100 A to 2.5 microns. Half the mirror's surface was also exposed to UV irradiation to determine its effects on the contaminative character of the depositing outgases. The amount of deposit per unit area was measured by microbalances mounted near the mirror; the sensor of one microbalance was UV irradiated. A quadrupole mass spectrometer was used to determine the composition of the outgases.

Haynes, D. L.↗

NASA NTRS1988

Shock tube investigation of dynamic response of pressure transducers for validation of rotor performance measurements

For some time now, NASA has had a program under way to aid in the validation of rotor performance and acoustics codes associated with the UH-60 rotary-wing aircraft; and to correlate results of such studies with those obtained from investigations of other selected aircraft rotor performance. A central feature of these studies concerns the dynamic measurement of surface pressure at various locations up to frequencies of 25 KHz. For this purpose, fast-response gauges of the Kulite type are employed. The latter need to be buried in the rotor; they record surface pressures which are transmitted by a pipette connected to the gauge. The other end of the pipette is cut flush with the surface. In certain locations, the pipette configuration includes a rather sharp right-angle bend. The natural question has arisen in this connection: In what way are the pipettes modifying the signals received at the rotor surface and subsequently transmitted to the sensitive Kulite transducer element. The basic details and results of the program performed and recently completed in the High Pressure Shock Tube Laboratory of the Department of Aeronautics and Astronautics at Stanford University are given.

Bershader, Daniel↗

NASA NTRS1984

Energy Efficient Engine high pressure turbine component test performance report

The high pressure turbine for the General Electric Energy Efficient Engine is a two stage design of moderate loading. Results of detailed system studies led to selection of this configuration as the most appropriate in meeting the efficiency goals of the component development program. To verify the design features of the high pressure turbine, a full scale warm air turbine test rig with cooling flows simulated was run. Prior to this testing, an annular cascade test was run to select vane unguided turn for the first stage nozzle. Results of this test showed that the base configuration exceeded the lower unguided turning configuration by 0.48 percent in vane kinetic energy efficiency. The air turbine test program, consisting of extensive mapping and cooling flow variation as well as design point evaluation, demonstrated a design point efficiency level of 90.0 percent based on the thermodynamic definition. In terms of General Electric cycle definition, this efficiency was 92.5 percent. Based on this test, it is concluded that efficiency goals for the Flight Propulsion System were met.

Timko, L. P.↗