Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Scanning electron microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Study the effect of mechanical alloying parameters on synthesis of Cr{sub 2}Nb–Al{sub 2}O{sub 3} nanocomposite

Graphical abstract: - Highlights: • Cr{sub 2}Nb–Al{sub 2}O{sub 3} nanocomposite synthesized through MA. • Effect of BPR, rotating speed, milling time and PCA concentration investigated. • After annealing at 1100 °C crystalline phase were appeared. • Williamson–Hall analysis was used in order to study the grain size of nano composite. - Abstract: In this study, Cr{sub 2}Nb–20 vol.% Al{sub 2}O{sub 3} nanocomposite was prepared successfully by mechanochemical reaction between Al, Nb and Cr{sub 2}O{sub 3} powders. Amorphization of powder occurred during mechanical alloying because of high energy collisions between powders and steel balls in milling container which transfer high degree of energy to powders. Therefore, annealing was needed to form crystalline phases. The influence of different mechanical alloying parameters such as BPR, rotating speed, milling time and PCA concentration on synthesis of composite material were investigated. After mechanical alloying, the powder was encapsulated in quartz and then annealed at 1100 °C for 3 h. After annealing, 3 different phases were appeared (Cr{sub 2}Nb (cubic), Cr{sub 2}Nb (hexagonal) and α-Al{sub 2}O{sub 3}). The structural changes of powder particles during mechanical alloying were studied by X-ray diffractometry (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM)

36 MATERIALS SCIENCE↗

Carbon impurities on graphene synthesized by chemical vapor deposition on platinum

We report nanocrystalline carbon impurities coexisting with graphene synthesized via chemical vapor deposition on platinum. For certain growth conditions, we observe micron-size island-like impurity layers which can be mistaken for second graphene layers in optical microscopy or scanning electron microscopy. The island orientation depends on the crystalline orientation of the Pt, as shown by electron backscatter diffraction, indicating growth of carbon at the platinum surface below graphene. Dark-field transmission electron microscopy indicates that in addition to uniform single-crystal graphene, our sample is decorated with nanocrystalline carbon impurities with a spatially inhomogeneous distribution. The impurity concentration can be reduced significantly by lowering the growth temperature. Raman spectra show a large D peak, however, electrical characterization shows high mobility (∼8000 cm{sup 2}/Vs), indicating a limitation for Raman spectroscopy in characterizing the electronic quality of graphene.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Probing Electron Beam Induced Transformations on a Single-Defect Level via Automated Scanning Transmission Electron Microscopy

A robust approach for real-time analysis of the scanning transmission electron microscopy (STEM) data streams, based on ensemble learning and iterative training (ELIT) of deep convolutional neural networks, is implemented on an operational microscope, enabling the exploration of the dynamics of specific atomic configurations under electron beam irradiation via an automated experiment in STEM. Combined with beam control, this approach allows studying beam effects on selected atomic groups and chemical bonds in a fully automated mode. Here, in this study, we demonstrate atomically precise engineering of single vacancy lines in transition metal dichalcogenides and the creation and identification of topological defects in graphene. The ELIT-based approach facilitates direct on-the-fly analysis of the STEM data and engenders real-time feedback schemes for probing electron beam chemistry, atomic manipulation, and atom by atom assembly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polymer stabilization of the smectic C-alpha* liquid crystal phase—Over tenfold thermal stabilization by confining networks of photo-polymerized reactive mesogens

The smectic C*-alpha (SmC{sub α}*) phase is one of the sub-phases of ferroelectric liquid crystals that has drawn much interest due to its electro-optical properties and ultrafast switching. Generally observed above the ferroelectric SmC* phase in temperature, the SmC{sub α}* commonly shows only very narrow phase temperature range of a few degree Celsius. To broaden the SmC{sub α}* phase, polymer stabilization was investigated for thermal phase stabilization. Two different reactive monomers were tested in three mixtures, and all three broadened the temperature range of the SmC{sub α}* phase from 3 °C to 39 °C. The current reversal method was used to determine the phase existence versus temperature. Moreover, the texture and network structure was studied by polarized optical microscopy and scanning electron microscopy, with the latter revealing the confinement of the smectic layer structure within the porous polymer network.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermal stability of SrTiO{sub 3}/SiO{sub 2}/Si Interfaces at Intermediate Oxygen Pressures

The thermal stability of epitaxial SrTiO{sub 3} thin films grown by molecular-beam epitaxy on Si (001) has been studied using x-ray diffraction (XRD), optical microscopy (OM), scanning electron microscopy (SEM), and thermodynamic calculations. Our studies focus on the stability of the SrTiO{sub 3}/Si structures under the conditions typically employed in the pulse laser deposition (PLD) growth of complex metal oxide heteroepitaxy on Si. We observe additional Bragg peaks in thermally treated SrTiO{sub 3} buffered Si structures, corresponding to possibly TiSi{sub 2} and/or SrSiO{sub 3}, reaction products which are consistent with the reaction schemes we propose. In addition, OM and SEM reveal microstructures that are not readily accounted for solely by the solid state reactions as put forth by previous workers but can be reasonably explained by our proposed reaction schemes. Using our observations and thermodynamic analysis, we argue that reactions involving the gaseous species SiO(g), the reactivity of which has not been previously considered in this system, are important. We attribute the onset of degradation of the SrTiO{sub 3} film at high temperatures, to the circular void forming reaction Si(s)+SiO{sub 2}(s){yields}2SiO(g) at the interface and suggest that the reactions considered by previous workers involving all solid state reactants occurs only at the conclusion of degradation. Our results points to the need for keeping the PLD temperature as low as possible to minimize the production of reactive SiO(g) in avoiding the deleterious reactions.

36 MATERIALS SCIENCE↗

Preparation and Characterization of Ti-Zr-V Non-Evaporable Getter Films to Be Used in Ultra-High Vacuum

An appealing procedure to obtain operating pressures in the 10{sup -8} Pa range, which is necessary for the insertion devices elements of synchrotron sources, is to coat the inner ultra-high vacuum chamber walls with a thin film of non-evaporable getter (NEG) metals. Titanium, zirconium, vanadium, and their alloys are used as NEG materials due to their low activation temperature, high chemical activity, large solubility, and high diffusivity for gases. In this work, magnetron sputtering was employed to deposit thin films of Ti-Zr-V on a Si(111) substrate. The morphological, structural, and chemical analyses were carried out by atomic force microscopy (AFM), scanning electron microscopy (SEM) with energy-dispersive spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS)

36 MATERIALS SCIENCE↗

Evolution of the substructure of a novel 12% Cr steel under creep conditions

In this work we study the microstruture evolution of a newly developed 12% Cr martensitic/ferritic steel in as-received condition and after creep at 650 °C under 130 MPa and 80 MPa. The microstructure is described as consisting of mobile dislocations, dipole dislocations, boundary dislocations, precipitates, lath boundaries, block boundaries, packet boundaries and prior austenitic grain boundaries. The material is characterized employing light optical microscopy (LOM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and electron backscatter diffraction (EBSD). TEM is used to characterize the dislocations (mobile + dipole) inside the subgrains and XRD measurements are used to the characterize mobile dislocations. Based on the subgrain boundary misorientations obtained from EBSD measurements, the boundary dislocation density is estimated. The total dislocation density is estimated for the as-received and crept conditions adding the mobile, boundary and dipole dislocation densities. Additionally, the subgrain size is estimated from the EBSD measurements. In this publication we propose the use of three characterization techniques TEM, XRD and EBSD as necessary to characterize all type of dislocations and quantify the total dislocation densty in martensitic/ferritic steels. - Highlights: • Creep properties of a novel 12% Cr steel alloyed with Ta • Experimental characterization of different types of dislocations: mobile, dipole and boundary • Characterization and interpretation of the substructure evolution using unique combination of TEM, XRD and EBSD.

36 MATERIALS SCIENCE↗

Report for the Forensic Laboratory Analysis of Hose-in-Hose Transfer Line used in C-Farm Retrievals

Two 6-ft hose-in-hose transfer line sections used in the retrieval of C-Farm single-shell tanks were delivered to the 222-S Laboratory for forensic analysis to determine the amount of wear and degradation that had occurred during the lifetime of the hose in the tank farms on the Hanford Site. One hose section was used for supernatant liquid transfers, and the other section was used for slurry transfers. Cutting the hoses in a hot cell enabled visual and photographic examination of the inside surfaces of the hoses. The hoses were further investigated by optical microscopy and scanning electron microscopy.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Oriented SrFe{sub 12}O{sub 19} thin films prepared by chemical solution deposition

Thin films of SrFe{sub 12}O{sub 19} (SrM) were prepared from a solution of iron and strontium alkoxides through the chemical solution deposition method on both amorphous (glassy SiO{sub 2}), and single crystal substrates (Si(100), Si(111), Ag(111), Al{sub 2}O{sub 3}(001), MgO(111), MgAl{sub 2}O{sub 4}(111), SrTiO{sub 3}(111)) substrates. The process of crystallization was investigated by means of powder diffraction, atomic force microscopy and scanning electron microscopy. Magnetization measurements, ferromagnetic and nuclear magnetic resonance were used for evaluation of anisotropy in the films. Whilst amorphous substrates enabled growth of randomly oriented SrM phase, use of single crystal substrates resulted in samples with different degree of oriented growth. The most pronounced oriented growth was observed on SrTiO{sub 3}(111). A detailed inspection revealed that growth of SrM phase starts through the breakup of initially continuous film into isolated grains with expressive shape anisotropy and hexagonal habit. A continuous film with epitaxial relations to the substrate was produced by repeating recoating and annealing. - Graphical Abstract: XRD and AFM patterns of SrFe{sub 12}O{sub 19} thin film epitaxially grown on SrTiO{sub 3}(111) single crystal using seeding layer templating. Highlights: > Single phase SrFe{sub 12}O{sub 19} thin films prepared by chemical solution deposition. > Epitaxial growth on SrTiO{sub 3}(111) with (00l)SrM//(111)SrTiO{sub 3}, <110>SrM//<110>SrTiO{sub 3}). > Seed layer breaks into isolated single crystal islands and serves as a template. > Larger seed grains grow by consuming the grains within the bulk of recoated film.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of conical silicon tips with nanoscale sharpness by localized laser irradiation

The formation of conical silicon tips with nanoscale sharpness as a result of single-pulse localized laser irradiation is presented in this work. A Q-switched neodymium doped yttrium aluminum garnet nanosecond-pulse laser, emitting at its fourth harmonic of 266 nm, and a mask projection technique were used to generate circular laser spots, several microns in diameter. The irradiation of silicon-on-insulator films was performed in ambient, vacuum, or argon atmospheres, with the resulting structures and underlying substrate examined via atomic force microscopy and scanning electron microscopy. The laser fluence range within which tip formation occurs is strongly dependent on the irradiated spot size. Within this range, the height of the resulting tip increases with the fluence level, while nearly preserving the aspect ratio. The formation mechanism of these structures is briefly discussed in view of these results and other, related published work.

36 MATERIALS SCIENCE↗

Fluctuation cepstral scanning transmission electron microscopy of mixed-phase amorphous materials

Four-dimensional scanning transmission electron microscopy (4D-STEM) is a versatile analytical tool for characterizing materials structural properties. However, extending such analysis to disordered materials is challenging, especially in technologically important samples with mixed ordered and disordered phases. Here, in this work, we present a new 4D-STEM method, called fluctuation cepstral STEM (FC-STEM), based on the fluctuation analysis of cepstral transform of diffraction patterns. The peaks in the associated transformation relate to inter-atomic distances in a thin sample. By varying the real-space range over which fluctuations are calculated, distinct ordered and disordered phases can be mapped in a diffractive image reconstruction. We demonstrate the principles of FC-STEM by characterizing a silicon anode, harvested from a cycled lithium-ion battery. A mixture of amorphous and nanocrystalline silicon, graphitic carbon, and electrolyte by-products is identified and mapped. Comparisons with conventional electron imaging and energy-dispersive X-ray spectroscopy show that FC-STEM is highly effective for the structure determination of mixed-phase amorphous materials.

36 MATERIALS SCIENCE↗

The three-dimensional point spread function of aberration-corrected scanning transmission electron microscopy

Aberration-correction reduces the depth of field in scanning transmission electron microscopy and allows three-dimensional imaging by depth-sectioning. This imaging mode offers the potential for sub- ngstrom lateral resolution and nanometer-scale depth sensitivity. For biological samples, which may be many microns across and where high lateral resolution may not always be needed, optimizing the depth resolution even at the expense of lateral resolution may be desired, aiming to image through thick specimens. Although there has been extensive work examining and optimizing the probe formation in two-dimensions, there is less known about the probe shape along the optical axis. Here we examine the probe shape in three-dimensions in an attempt to better understand the depth-resolution in this mode. We present examples of how aberrations change the probe shape in three-dimensions and demonstrate that off-axial aberrations may need to be considered for focal series of large areas. We show that oversized or annular apertures theoretically improve the vertical resolution for 3D imaging of nanoparticles. When imaging nanoparticles of several nanometer size, the regular STEM can thereby be optimized such that the vertical full width at half maximum approaches that of the aberration corrected STEM with a standard aperture.

99 GENERAL AND MISCELLANEOUS↗

Sub-0.1 nm-resolution quantitative scanning transmission electron microscopy without adjustable parameters

Atomic-resolution imaging in the scanning transmission electron microscope (STEM) constitutes a powerful tool for nanostructure characterization. Here, we demonstrate the quantitative interpretation of atomic-resolution high-angle annular dark-field (ADF) STEM images using an approach that does not rely on adjustable parameters. We measure independently the instrumental parameters that affect sub-0.1 nm-resolution ADF images, quantify their individual and collective contributions to the image intensity, and show that knowledge of these parameters enables a quantitative interpretation of the absolute intensity and contrast across all accessible spatial frequencies. The analysis also provides a method for the in-situ measurement of the STEM's effective source distribution.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Epitaxial growth of non-polar m-plane ZnO thin films by pulsed laser deposition

Highlights: ► Unique m-plane ZnO films were deposited on m-plane sapphire substrate by PLD. ► The epitaxial relationship between the film and the substrate was studied. ► The surface morphology showed stripes due to in-plane anisotropy. ► PL spectra showed strong NBE emission and weak deep level emission. -- Abstract: Non-polar ZnO thin films were deposited on m-plane sapphire substrates by pulsed laser deposition at various temperatures from 300 to 700 °C. The effects of growth temperature on surface morphology, structural, electrical, and optical properties of the films were investigated. All the films exhibited unique m-plane orientation indicated by X-ray diffraction and transmission electron microscopy. Based on the scanning electron microscopy and atomic force microscopy, the obtained films had smooth and highly anisotropic surface, and the root mean square roughness was less than 10 nm above 500 °C. The maximum electron mobility was ∼18 cm{sup 2}/V s, with resistivity of ∼0.26 Ω cm for the film grown at 700 °C. Room temperature photoluminescence of the m-plane films was also investigated.

36 MATERIALS SCIENCE↗

Enhancement of the efficiency of dye-sensitized solar cell with multi-wall carbon nanotubes/polypyrrole composite counter electrodes prepared by electrophoresis/electrochemical polymerization

Graphical abstract: The overall energy conversion efficiency of the DSSC employing the MWCNT/PPy CE reached 3.78%. Compared with a reference DSSC using single MWCNT film CE with efficiency of 2.68%, the energy conversion efficiency was increased by 41.04%. Highlights: ► MWCNT/PPy composite film prepared by electrodeposition layer by layer was used as counter electrode in DSSC. ► The overall energy conversion efficiency of the DSSC was 3.78% by employing the composite film. ► The energy conversion efficiency increased by 41.04% compared with efficiency of 2.68% by using the single MWCNT film. ► We analyzed the mechanism and influence factor of electron transfer in the composite electrode by EIS. - Abstract: For the purpose of replacing the precious Pt counter electrode in dye-sensitized solar cells (DSSCs) with higher energy conversion efficiency, multi-wall carbon nanotube (MWCNT)/polypyrrole (PPy) double layers film counter electrode (CE) was fabricated by electrophoresis and cyclic voltammetry (CV) layer by layer. Atom force microscopy (AFM), scanning electron microscopy (SEM) and transmission electron microscope (TEM) demonstrated the morphologies of the composite electrode and Raman spectroscopy verified the PPy had come into being. The overall energy conversion efficiency of the DSSC employing the MWCNT/PPy CE reached 3.78%. Compared with a reference DSSC using single MWCNT film CE with efficiency of 2.68%, the energy conversion efficiency was increased by 41.04%. The result of impedance showed that the charge transfer resistance R{sub ct} of the MWCNT/PPy CE had the lowest value compared to that of MWCNT or PPy electrode. These results indicate that the composite film with high conductivity, high active surface area, and good catalytic properties for I{sub 3}{sup −} reduction can potentially be used as the CE in a high-performance DSSC.

36 MATERIALS SCIENCE↗

Microstress contrast in scanning electron acoustic microscopy of ceramics

A mathematical model of image contrast in scanning electron acoustic microscopy (SEAM) due to the effect of residual stresses in materials is presented. It is found that in regions near the ends of the radial cracks induced by Vickers indentation the SEAM micrographs reveal a rather large variation of the acoustic output signal.

Cantrell, John H.↗

Structuring by field enhancement of glass, Ag, Au, and Co thin films using short pulse laser ablation

Single pulse laser ablation of glass, Ag, Au, and Co thin films was experimentally investigated with a laser pulse width of 400 ps at a wavelength of 532 nm both in the far and near fields. In the far-field regime, the electromagnetic field results from a focused laser beam, while the near-field regime is realized by a combination of the focused laser beam incident on a spherical colloidal particle. For the near-field experiments we have used polystyrene colloidal particles of 700 nm diameter self-assembled or spin coated on top of the surfaces. Laser fluences applied are in the range of 0.01-10 J/cm{sup 2}. The diameter and the morphologies of the ablated holes were investigated by optical microscopy, profilometry, scanning electron microscopy, and atomic force microscopy. The dependence of the shape of the holes reflects the fluence regime and the thermophysical properties, i.e., melting temperature and thermal diffusivity of the surfaces involved in the experiments. We give quantitative data about the fluence threshold, diameter, and depth ablation dependence for the far and near fields and discuss their values with respect to the enhancement factor of the intensity of the electromagnetic field due to the use of the colloidal particles. Theoretical estimations of the intensity enhancement were done using the finite-difference time-domain method by using the RSOFT software. The application of near fields allows structuring of the surfaces with structure dimension in the order of 100 nm and even below.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Shape-dependent bactericidal activity of copper oxide nanoparticle mediated by DNA and membrane damage

Highlights: • Spherical and sheet shaped copper oxide nanoparticles were synthesized. • Physical characterizations of these nanoparticles were done by TEM, DLS, XRD, FTIR. • They showed shape dependent antibacterial activity on different bacterial strain. • They induced both membrane damage and ROS mediated DNA damage in bacteria. - Abstract: In this work, we synthesized spherical and sheet shaped copper oxide nanoparticles and their physical characterizations were done by the X-ray diffraction, fourier transform infrared spectroscopy, transmission electron microscopy and dynamic light scattering. The antibacterial activity of these nanoparticles was determined on both gram positive and gram negative bacterial. Spherical shaped copper oxide nanoparticles showed more antibacterial property on gram positive bacteria where as sheet shaped copper oxide nanoparticles are more active on gram negative bacteria. We also demonstrated that copper oxide nanoparticles produced reactive oxygen species in both gram negative and gram positive bacteria. Furthermore, they induced membrane damage as determined by atomic force microscopy and scanning electron microscopy. Thus production of and membrane damage are major mechanisms of the bactericidal activity of these copper oxide nanoparticles. Finally it was concluded that antibacterial activity of nanoparticles depend on physicochemical properties of copper oxide nanoparticles and bacterial strain.

36 MATERIALS SCIENCE↗