Comparative Study of Organic Radical Cation Stability and Coulombic Efficiency for Nonaqueous Redox Flow Battery Applications
Explore the source record for details and available documents.
Attanayake, N. Harsha↗
SEARCH · Engineering Papers
Results for “SUSAN”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
X-ray Transient Absorption Studies of Exciton Self-Trapping
Here, we present optical pump/X-ray absorption probe studies to probe changes in electronic distribution and local structure upon formation of a self-trapped exciton. The experiments were carried out on the mixed-valence halide-bridged transition metal linear chain charge density wave material [Pt(en 2 )][Pt(en 2 )Cl 2 ]·(ClO 4 ) 4 . Photoinduced changes in the Pt L III XANES spectrum were measured on a picosecond time scale following generation of excitons via optical excitation of the intervalence charge transfer transition. Ab initio FEFF9 modeling of the spectra and the associated angular momentum projected density of states was used to interpret the response. We find photoinduced changes reflecting electronic redistribution and local lattice distortions that correspond to strong localization of the self-trapped state.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NO Degradation on the Anatase TiO 2 (001) Surface in the Presence of Water
Nitric oxide (NO) is known to degrade to nitric acid (HNO 3 ) on anatase TiO2 facets under visible light irradiation in the presence of water. However, the exact role that water plays in this photoreaction is not fully understood. Here, by employing the density functional theory (DFT) and time-dependent density functional tight binding (TD-DFTB), we show the viability of two suggested degradation pathways involving water. Both reaction pathways are triggered by a charge transfer excitation from the NO molecule to the TiO 2 surface. In one of them, NO interacts with dissociated water molecules adsorbed on the surface to form HONO + , whereas for the second pathway, NO is oxidized to NO 2 + by capturing one oxygen atom from the substrate. Both HONO and NO 2 are known byproducts in the photodegradation of NO, which further react with adsorbed water to finally produce HNO 3 . We also demonstrate by means of nudged elastic band calculations that these reactions are unlikely to happen without illumination.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Transition Metal Dissolution in Lithium-Ion Cells: A Piece of the Puzzle
Static leaching tests were performed using the chemically delithiated positive electrode materials, LiFePO 4 , LiCoO 2 , LiMn 2 O 4 , LiNiO 2 , and LiNi 0.8 Mn 0.1 Co 0.1 O 2 . Instead of the common electrolyte, which contains LiPF 6 , the solvent consisted of only ethylene carbonate (EC) and ethyl methyl carbonate (EMC), limiting the possible reactions to only those that depend on the solvent. The product liquids from these experiments showed that there were lithium-bearing species in common, such as Li(EC) + and Li(EMC) + . Interestingly, we found evidence of electrolyte degradation products in both the positive-and negative-ion mass spectral results. The positive-ion results showed that the products tended to coordinate to lithium. In conclusion, the negative-ion results showed that most of the products tended to complex with transition metals. It was difficult to discern which positive ion was associated with which negative ion.
25 ENERGY STORAGE↗
Competitive Sorption of H 2 O and CO 2 in Clay Mineral Interlayers
The first-reported competitive CO 2 –H 2 O sorption isotherms on a naturally occurring expandable clay mineral (saponite) exchanged with Na, K, and Cs at near ambient CO 2 concentrations (1% CO 2 ) are reported by combining ATR-FTIR spectroscopy with gravimetric sorption methods. Little CO 2 sorption was observed at high relative humidity (RH) but increased significantly at low RH. Unlike prior work where CO 2 sorption was reported on samples that were previously subjected to heating and/or evacuation treatment to remove sorbed H 2 O, this study manipulated CO 2 sorption by controlling RH. CO 2 sorption increased in the order Cs- > K- > Na-exchanged saponite and was anticorrelated with the Gibbs energy of hydration of the exchangeable cation. As expected, H 2 O sorption followed the opposite trend, with increased H 2 O sorption occurring in the order Na > K > Cs. The amount of CO 2 sorbed using 1 atm CO 2 (p/p o = 1.0) ranged from 50 to 30 mg CO 2 /g clay and from 1.25 to 0.8 mg CO2 /g clay for 1% CO 2 (p/p o = 0.01) in N 2 . The sensitivity of the ATR-FTIR measurements is demonstrated by detecting the CO 2 stretch of adsorbed CO 2 from air containing 500 ppmv CO 2 . The spectral features of sorbed CO 2 were minimally affected by the nature of the exchangeable cation or variations in H 2 O content. However, the position of the HOH bending band shifted significantly from 1638 to 1610 cm –1 as H 2 O content decreased, reflecting changes in intermolecular hydrogen bonding between H 2 O molecules in the saponite interlayer. The shift in position of the HOH bending band to lower energy was coincident with increased CO 2 sorption. CO 2 sorption in clay mineral interlayers is consistent with sorption on weakly hydrated partially hydrophobic sites found on low charge density smectites and is enhanced by lower RH and by the presence of weakly hydrated exchangeable cations like Cs + or K + . In conclusion, the greatest CO 2 sorption occurs on Cs-saponite because this is the least hydrated cation of the three used in the study and indicates that CO2 sorption occurs on the neutral portion of the siloxane surface.
Johnston, Cliff T. [Purdue Univ., West Lafayette, ↗
Hydrophobic Nanoconfinement Enhances CO 2 Conversion to H 2 CO 3
Understanding the formation of H 2 CO 3 in water from CO 2 is important in environmental and industrial processes. Although numerous investigations have studied this reaction, the conversion of CO 2 to H 2 CO 3 in nanopores, and how it differs from that in bulk water, has not been understood. We use ReaxFF metadynamics molecular simulations to demonstrate striking differences in the free energy of CO 2 conversion to H 2 CO 3 in bulk and nanoconfined aqueous environments. We find that nanoconfinement not only reduces the energy barrier but also reverses the reaction from endothermic in bulk water to exothermic in nanoconfined water. Also, charged intermediates are observed more often under nanoconfinement than in bulk water. Stronger solvation and more favorable proton transfer with increasing nanoconfinement enhance the thermodynamics and kinetics of the reaction. Here our results provide a detailed mechanistic understanding of an important step in the carbonation process, which depends intricately on confinement, surface chemistry, and CO 2 concentration.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Control of the Structural Charge Distribution and Hydration State upon Intercalation of CO 2 into Expansive Clay Interlayers
Numerous experimental investigations indicated that expansive clays such as montmorillonite can intercalate CO 2 preferentially into their interlayers and therefore potentially act as a material for CO 2 separation, capture, and storage. However, an understanding of the energy–structure relationship during the intercalation of CO 2 into clay interlayers remains elusive. Here, in this study, we use metadynamics molecular dynamics simulations to elucidate the energy landscape associated with CO 2 intercalation. Our free energy calculations indicate that CO 2 favorably partitions into nanoconfined water in clay interlayers from a gas phase, leading to an increase in the CO 2 /H 2 O ratio in clay interlayers as compared to that in bulk water. CO 2 molecules prefer to be located at the centers of charge-neutral hydrophobic siloxane rings, whereas interlayer spaces close to structural charges tend to avoid CO 2 intercalation. The structural charge distribution significantly affects the amount of CO 2 intercalated in the interlayers. These results provide a mechanistic understanding of CO 2 intercalation in clays for CO 2 separation, capture, and storage.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Binding of Li + to Negatively Charged and Neutral Ligands in Polymer Electrolytes
Conceptually, single-ion polymer electrolytes (SIPE) with the anion bound to the polymer could solve major issues in Li-ion batteries, but their conductivity is too low. Experimentally, weakly interacting anionic groups have the best conductivity. To provide a theoretical basis for this result, density functional theory calculations of the optimized geometries and energies are performed for charged ligands used in SIPE. Comparison is made to neutral ligands found in dual-ion conductors, which demonstrate higher conductivity. Further, the free energy differences between adding and subtracting a ligand are small enough for the neutral ligands to have the conductivity seen experimentally. However, charged ligands have large barriers, implying that lithium transport will coincide with the slow polymer diffusion, as observed in experiments. Overall, SIPE will require additional solvent to achieve a sufficiently high conductivity. Additionally, the binding of mono- and bidentate geometries varies, providing a simple and clear reason that polarizable force fields are required for detailed interactions.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Partitioning of Seven Different Classes of Antibiotics into LPS Monolayers Supports Three Different Permeation Mechanisms through the Outer Bacterial Membrane
The outer membrane (OM) of Gram-negative (G-) bacteria presents a barrier for x classes of antibacterial agents. Lipopolysaccharide (LPS), present in the outer leaflet of the OM, is stabilized by divalent cations and is considered to be the major impediment for antibacterial agent permeation. However, the actual affinities of major antibiotic classes toward LPS have not yet been determined. In the present work, we use Langmuir monolayers formed from E. coli Re and Rd types of LPS to record pressure-area isotherms in the presence of antimicrobial agents. Our observations suggest three general types of interactions. Firstly, some antimicrobials demonstrated no measurable interactions with LPS. This lack of interaction in the case of cefsulodin, a third-generation cephalosporin antibiotic, correlates with its low efficacy against G- bacteria. Ampicillin and ciprofloxacin also show no interactions with LPS, but in contrast to cefsulodin, both exhibit good efficacy against G- bacteria, indicating permeation through common porins. Secondly, we observe substantial intercalation of the more hydrophobic antibiotics novobiocin, rifampicin, azithromycin, and telithromycin into relaxed LPS monolayers. These largely re-partition back to the subphase with monolayer compression. We find that the hydrophobic area, charge, and dipole all show correlations with both the mole fraction of antibiotic retained in the monolayer at the monolayer-bilayer equivalence pressure and the efficacies of these antibiotics against G- bacteria. Thirdly, amine-rich gentamicin and the cationic antimicrobial peptides polymyxin B and colistin show no hydrophobic insertion but are instead strongly driven into the polar LPS layer by electrostatic interactions in a pressure-independent manner. Their intercalation stably increases the area per molecule (by up to 20%), which indicates massive formation of defects in the LPS layer. These defects support a self-promoted permeation mechanism of these antibiotics through the OM, which explains the high efficacy and specificity of these antimicrobials against G- bacteria.
lateral pressure↗
Nanoconfinement of Carbon Dioxide within Interfacial Aqueous/Ionic Liquid Systems
Nanoporous, gas-selective membranes have shown encouraging results for the removal of CO 2 from flue gas, yet the optimal design for such membranes is often unknown. Therefore, we used molecular dynamics simulations to elucidate the behavior of CO 2 within aqueous and ionic liquid (IL) systems ([EMIM][TFSI] and [OMIM][TFSI]), both confined individually and as an interfacial aqueous/IL system. We found that within aqueous systems the mobility of CO 2 is reduced due to interactions between the CO 2 oxygens and hydroxyl groups on the pore surface. Within the IL systems, we found that confinement has a greater effect on the [EMIM][TFSI] system as opposed to the [OMIM][TFSI] system. Paradoxically, the larger and more asymmetrical [OMIM]+ molecule undergoes less efficient packing, resulting in fewer confinement effects. Finally, free energy surfaces of the nanoconfined aqueous/IL interface demonstrate that CO 2 will transfer spontaneously from the aqueous to the IL phase.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Differential Surface Adsorption Phenomena for Conventional and Novel Surfactants Correlates with Cha
Explore the source record for details and available documents.
Kanthe, Ankit D.↗
Modulating the Electronic Transport of 2D Sb2Te3 Nanoplates by Coinage Metal Intercalation
Thermoelectric materials are particularly relevant to the current energy infrastructure and demands of the 21st century, converting waste heat into usable electricity. The solution intercalation of zerovalent copper into Sb2Te3 nanoplates, a well-established thermoelectric material, is reported. The copper intercalant is homogeneously distributed throughout the nanoplates, confirmed by scanning transmission electron microscopy coupled with energy-dispersive X-ray spectroscopy. The copper composition was shown to be 6 at. % by X-ray photoelectron spectroscopy. Copper ordering within the van der Waals gaps of the nanoplates is confirmed by selected area electron diffraction. Fabrication and thermoelectric property measurements of single-crystal Sb2Te3 and Cu-Sb2Te3 nanoplate devices show effective modulation of electrical conductivity and Seebeck coefficient with Cu intercalation. X-ray photoelectron spectroscopic studies in the valence-band region reveal additional electronic states from copper that appear near the Fermi energy, postulated to act as electron acceptors, leading to modulation of the electronic transport properties.
2D nanoplates↗
Ferroelectricity in Atomic Layer Deposited Wurtzite Zinc Magnesium Oxide Zn 1– x Mg x O
Conformal deposition of wurtzite ferroelectrics, which is needed for their use in scaled nonvolatile memories, is challenging using current physical vapor deposition techniques. To overcome the conformality barrier, this work demonstrates ferroelectricity in wurtzite Zn 1− x Mg x O thin films prepared by plasma-enhanced atomic layer deposition, which is a non-line-of-sight deposition method. Films ranging in composition from x = 0.00 to x = 0.58 are predominantly wurtzite phase and exhibit a (0001)-texture. Increasing the magnesium content decreases the c/a ratio, increases the optical bandgap energy, increases the piezoelectric response, and enables polarization reversal. Clear polarization switching is demonstrated in 50 nm thick Zn 1− x Mg x O films by piezoresponse force microscopy in compositions containing x = 0.46 and x = 0.58.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
High Thermoelectric Performance in 2D Sb 2 Te 3 and Bi 2 Te 3 Nanoplate Composites Enabled by Energy Carrier Filtering and Low Thermal Conductivity
Thermoelectrics are an important class of materials with great potential in alternative energy applications. In this study, two-dimensional (2D) nanoplates of the layered chalcogenides, Sb 2 Te 3 and Bi 2 Te 3 , are synthesized and composites of the two are investigated for their thermoelectric properties. The two materials, Sb 2 Te 3 and Bi 2 Te 3 , were synthesized as hexagonal, 2D nanoplates via a colloidal polyol route. The as-synthesized Sb 2 Te 3 and Bi 2 Te 3 vary drastically from one another in their lateral and vertical dimensions as revealed by scanning electron microscopy and atomic force microscopy. The single crystalline nanoplate nature is deduced by high-resolution transmission electron microscopy and selected area electron diffraction. Nanoplates have well-defined hexagonal facets as seen in the scanning and transmission electron microscopy images. The nanoplates were consolidated as an anisotropic nanostructured pellet via spark plasma sintering. Preferred orientation observed in the powder X-ray diffraction pattern and scanning electron microscopy images of the fractured pellets confirm the anisotropic structure of the nanoplates. Thermoelectric properties in the parallel and perpendicular directions were measured, revealing strong anisotropy with a significant reduction to thermal conductivity in the perpendicular direction due to increased phonon scattering at nanoplate interfaces. All compositions, except that of the 25% Bi 2 Te 3 nanoplate composite, behave as degenerate semiconductors with increasing electrical resistivity as the temperature increases. The Seebeck coefficient is also increased dramatically in the nanocomposites, the highest reaching 210 μV/K for 15% Bi 2 Te 3 . The increase in Seebeck is attributed to energy carrier filtering at the nanoplate interfaces. Overall, these enhanced thermoelectric properties lead to a drastic increase in the thermoelectric performance in the perpendicular direction, with zT ~ 1.26, for the 15% Bi 2 Te 3 nanoplate composite at 450 K.
36 MATERIALS SCIENCE↗
Direct Laser Writing of Multimetal Bifunctional Catalysts for Overall Water Splitting
Water electrolysis is of interest as a sustainable way to produce clean hydrogen and oxygen fuel and help mitigate the rising problems of climate change while meeting global energy demands. High-efficiency, stable, and earth-abundant bifunctional catalysts are needed to enable more effective electrochemical cells for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Here, we investigate the synthesis, composition, performance, and mechanism of multimetal catalysts serving dual functionality in both OER and HER of water electrolysis. Through a laser synthesis method, we synthesized heterogeneous catalysts of nanocrystalline multimetallic alloy pockets embedded within an amorphous oxide matrix. We evaluated the performance and composition of a range of mixed transition-metal oxide materials for both OER and HER, ultimately synthesizing a Cr 0.01 Fe 0.27 Co 0.34 Ni 0.38 O x /C y catalyst that has a stable, high-rate, and competitive overall water splitting performance of 1.76 V at 100 mA cm –2 in an alkaline medium. Using density functional theory to gain insight as the active site and mechanism, we propose that the inclusion of a minor amount of Cr increases the degeneracy of energetic states that lowers the cost of forming the O 2 p–d bond and H 1 s–d bond due to the hybridization of s, p, and d orbitals from Cr. Using a two-electrode water electrolysis cell with a constant potential of 1.636 V to mimic the setup for fuel production, we found the catalyst to be stable at 14–15 mA cm –2 for 40 h. Furthermore, this laser synthesis method allowing for facile and rapid synthesis of complex multimetal systems demonstrates how doping a Fe, Co, and Ni heterogeneous amorphous/nanocrystalline structure with small amounts of Cr is important for bifunctional catalytic behavior, particularly for increasing HER functionality in advancing our understanding for future electrocatalytic design.
08 HYDROGEN↗
Transition-Metal Dissolution from NMC-Family Oxides: A Case Study
In this work we investigated the static reactions of highly delithiated Li(Ni 1/3 Mn 1/3 Co 1/3 )O 2 , Li(Ni 0.5 Mn 0.3 Co 0.2 )O 2 , Li(Ni 0.6 Mn 0.2 Co 0.2 )O 2 , and Li(Ni 0.8 Mn 0.1 Co 0.1 )O 2 positive electrodes with 2,3-butanedione and with tetrabutyl ammonium bifluoride as model leaching agents. In the bifluoride trials, it was found that [Ni] in the leachate was proportional to X Co ( X Ni ) 3 , where X M is the ideal stoichiometry in the bulk oxide, and inversely proportional to ( X Mn ) 2 ; [Mn] to X Co ( X Ni ); and [Co] to X Co . The relationships between metal concentrations and stoichiometry may indicate that nickel, as a next-nearest neighbor on the positive electrode surface, can make dissolution more favorable in some instances.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗