Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STRENGTH CALCULATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Coupled-mode analysis of phase-locked injection laser arrays

A coupled-mode analysis has been developed to describe the output of phase-locked injection laser arrays. It is shown that an array of emitters with weak coupling can only operate in a set of discrete modes determined by the number of and the spacing of the emitters. The interaction between emitters leads to a splitting of the common frequency of operation that can be estimated from the coupling strength. The coupled-mode analysis is compared to calculations based on simple diffraction theory. A consequence of the analysis is an explanation for the commonly observed discrepancy between experimentally observed far-field lobe widths and those predicted by simple diffraction theory.

Butler, J. K.↗

Oscillator strengths for OII ions

Oscillator strengths between various doublet states of OII ions are calculated in which extensive multi-configuration wave functions are used. The lower levels for the transitions are of the 2p(3) D(2)o and 2p(3) 2po states, and the upper levels are 2p(4), 3s, and 3d states. The results, which are estimated to have errors of less than 10% for individual transitions, agree quite well with the beam foil experiments, as well as with the calculations by use of the non-closed shell many electron theory (NCMET). The agreement with the rocket measurements is also good except for the 538/581 A pair, in which the 538 A line is believed to be blend with the other stronger quartet line. However, a comparison with the recent branching ratio measurement indicates that discrepances between the present calculation and th experiment do exist for certain transistions.

Ho, Y. K.↗

Oscillator strengths for O(II) ions

Oscillator strengths between various doublet states of OII ions are calculated in which extensive multi-configuration wave functions are used. The lower levels for the transitions are of the 2p(3) D(2)o and 2p(3) 2po states, and the upper levels are 2p(4), 3s, and 3d states. The results, which are estimated to have errors of less than 10 percent for individual transitions, agree quite well with the beam foil experiments, as well as with the calculations by use of the non-closed shell many-electron theory (NCMET). The agreement with the rocket measurements is also good except for the 538/581 A pair, in which the 538 A line is believed to blend with the other stronger quartet line. However, a comparison with the recent branching ratio measurement indicates that discrepancies between the present calculation and the experiment do exist for certain transitions.

Ho, Y. K.↗

The steady state toroidal magnetic field at the core-mantle boundary

Recent measurements indicate that the strength of the toroidal magnetic field at Earth's core-mantle boundary is comparable in strength to the poloidal field - 5 to 10 gauss. Calculations are given to show that this is an inevitable result of the external boundary condition on the core, in which the mantle electrical conductivity is several orders of magnitude lower than that of the core. The measurements are shown to imply that the internal core magnetic field is in the range of several hundred gauss. Thus the measurements imply that the Earth's core contains a strong toroidal magnetic field. They also support the idea that Earth's dynamo, and by implication, other planetary magnetic fields, involves efficient toroidal magnetic field generation through strong differential rotation.

Pearce, S. J.↗

Formation of cyclotron lines in gamma-ray burst spectra

A transmission model of gamma-ray burst sources is studied using the relativistic QED magnetic-resonant opacities including multiple photon scattering, incorporated into a discrete-ordinate radiative-transport scheme. The physics of the cyclotron line-producing region is discussed in general, and the expected line profiles, relative harmonic strengths, and polarizations are indicated under various conditions. The calculated spectra for these models show good agreement with the spectra reported from Ginga for GB 880205 and GB 870303.

Alexander, S. G.↗

Finite element elastic-plastic-creep and cyclic life analysis of a cowl lip

Results are presented of elastic, elastic-plastic, and elastic-plastic-creep analyses of a test-rig component of an actively cooled cowl lip. A cowl lip is part of the leading edge of an engine inlet of proposed hypersonic aircraft and is subject to severe thermal loadings and gradients during flight. Values of stresses calculated by elastic analysis are well above the yield strength of the cowl lip material. Such values are highly unrealistic, and thus elastic stress analyses are inappropriate. The inelastic (elastic-plastic and elastic-plastic-creep) analyses produce more reasonable and acceptable stress and strain distributions in the component. Finally, using the results from these analyses, predictions are made for the cyclic crack initiation life of a cowl lip. A comparison of predicted cyclic lives shows the cyclic life prediction from the elastic-plastic-creep analysis to be the lowest and, hence, most realistic.

Arya, Vinod K.↗

Tensile adhesion testing methodology for thermally sprayed coatings

The structure of thermally sprayed coatings consists of lamellae which are oriented parallel to the substrate surface. The lamellae separate and fracture by distinctive mechanisms which are reflected in the failure morphology, and these may be described as adhesive (between the coating and substrate), cohesive (within the coating), or mixed mode. There is a large variability in the failure stress for any nominally identical group of coatings. A lower bound for the fracture toughness of alumina coatings can be calculated as 0.2 MNm exp -3/2. The coating strength values may also be treated as belonging to the statistical distribution of the Weibull function. The Weibull modulus of the coating strength varied from 1.4 to 3.8. This analysis infers that the flaw size within coatings is highly variable and that the flaws are nonuniformly dispersed. The present work focuses on the question of whether tensile adhesion tests are an appropriate testing method for thermally sprayed materials.

Berndt, Christopher C.↗

Finite element elastic-plastic-creep and cyclic life analysis of a cowl lip

Results are presented of elastic, elastic-plastic and elastic-plastic-creep analyses of a test-rig component of an actively cooled cowl lip. A cowl lip is part of the leading edge of an engine inlet of proposed hypersonic aircraft and is subject to severe thermal loadings and gradients during flight. Values of stresses calculated by elastic analysis are well above the yield strength of the cowl lip material. Such values are highly unrealistic, and thus elastic stress analyses are inappropriate. The inelastic (elastic-plastic and elastic-plastic-creep) analyses produce more reasonable and acceptable stress and strain distributions in the component. Finally, using the results from these analyses, predictions are made for the cyclic crack initiation life of a cowl lip. A comparison of predicted cyclic lives shows the cyclic life prediction from the elastic-plastic-creep analysis to be the lowest and, hence, most realistic.

Arya, V. K.↗

A numerical study of the unsteady processes associated with the type IV shock interaction

A time-dependent ADI formulation of the two dimensional Navier-Stokes equations coupled with the total variation diminishing (TVD) scheme is used to examine the type IV shock interaction time accurately. The experimentally measured and computationally calculated unsteadiness of the type IV interaction is shown to be related to the formation and shedding of shear layers in the shock layer, and the frequency of oscillation of the jet is a strong function of the shedding rate of these shear layers. For one particular geometry, an oscillation frequency of 1.4 kHz was calculated. The effects of shock impingement angle and shock strength on the location and magnitude of the peak pressure are also identified. In one case it is shown that a 1-deg change in the impinging shock angle can alter the location of the associated jet by almost 11 deg with a change in the peak surface pressure of 32 percent.

Lind, Charles A.↗

Asteroid 243 IDA and its satellite

A high-resolution mosaic of Ida shows a highly irregular body (roughly 56 km long), heavily covered with craters, with many interesting geological features, including grooves, blocks, chutes, dark-floored craters, and crater chains. A satellite of Ida, with a preliminary designation of 1993 (243) 1, was discovered in orbit around Ida. It is approximately 1.5 km in diameter, has an albedo and spectral reflectance not grossly different from Ida, and orbits Ida in a prograde direction with a period of roughly 20 hr. No other comparable-sized satellites have been found near Ida. New pictures of the opposite side of Ida reveal an irregular, dog-bone shape, with a prominent gouge that seems to separate Ida into two chief components. A V-shaped valley, well shown in the highest-resolution view of Ida returned in April, may mark a modest expression on the September face of the more dramatic feature on the back side. Ida's dense population of craters shows a wide diversity of morphologies, consistent with the surface having been subjected to saturated bombardment by smaller projectiles. Assuming the same projectile flux applies to Ida was used in deriving Gaspra's cratering age of about 200 m.y., and assuming that Gaspra and Ida both have the same impact strength, then the age of Ida's surface is calculated to be 1-2 b.y. This is considerably older than expected from other evidence concerning the Koronis family. Our favored explanation of Ida's satellite is that it (or a precursor satellite from which the present satellite was derived) formed during the catastrophic disruption event that formed Ida itself and formed the Koronis family of asteroids. Perhaps, instead, the satellite is a block ejected from a cratering impact. In any case, smaller blocks visible on some parts of Ida are more certain to be crater ejecta, whether or not they were ever temporary satellites.

Chapman, C. R.↗

Computational/experimental investigation of staged injection into a Mach 2 flow

The stage normal injection of two jets of air into a Mach 2 freestream behind a rearward-facing step has been investigated using laser-induced iodine fluorescence and laser doppler anemometry techniques. A detailed data set has been compiled that includes profiles of pressure, temperature, two components of velocity, and mole fraction of the injectant at 44 locations, plus planar surveys of pressure, temperature, velocity, and mole fraction. A companion numerical study was performed using the SPARK Navier-Stokes code. Good overall agreement was observed for this complex, highly three-dimensional flowfield. Discrepancies were observed in the computed and measured total temperatures, turbulent mixing, and shock strengths. The effect of grid resolution was investigated by calculating solutions on grids of 60,000 points, 200,000 points, and 450,000 points. Differences in the solutions on the two finer grids were small. The effect of turbulence modeling was investigated by calculating solutions with three different algebraic models for the jet turbulence. Overall, the turbulence models were found to have the greatest effect on the numerical solutions, followed by the grid resolution and the injectant Mach number.

Eklund, D. R.↗

Understanding the large-scale structure of magnetic fields in the corona and heliosphere

To understand the non-radial nature of the southwestern streamer in the 3 November 1994 eclipse and the near absence of a latitudinal gradient of the interplanetary magnetic field strength seen by Ulysses over the southern pole, we calculate the coronal and inter planetary magnetic field from WSO photospheric field data using both the horizontal current-current sheet model (Zhao and Hoeksema, 1994) and the current sheet-source surface model (Zhao and Hoeksema, 1995). These models account for the effects of large-currents and current sheets in the corona. Comparison of the calculated results with white light, X-ray, and IMF observations show that non-radial coronal streamers and a near-zero latitudinal gradient of the radial component of the IMF may be explained by a large-scale current sheet. To best match the observations, the height of the cusp point (above which current sheets form) differs from one streamer to another. While heliospheric volume currents flowing above the source surface certainly affect the interplanetary field, they have little or no influence on the structure of the corona.

Zhao, X. P.↗

Helicopter Blade-Vortex Interaction Noise with Comparisons to CFD Calculations

A comparison of experimental acoustics data and computational predictions was performed for a helicopter rotor blade interacting with a parallel vortex. The experiment was designed to examine the aerodynamics and acoustics of parallel Blade-Vortex Interaction (BVI) and was performed in the Ames Research Center (ARC) 80- by 120-Foot Subsonic Wind Tunnel. An independently generated vortex interacted with a small-scale, nonlifting helicopter rotor at the 180 deg azimuth angle to create the interaction in a controlled environment. Computational Fluid Dynamics (CFD) was used to calculate near-field pressure time histories. The CFD code, called Transonic Unsteady Rotor Navier-Stokes (TURNS), was used to make comparisons with the acoustic pressure measurement at two microphone locations and several test conditions. The test conditions examined included hover tip Mach numbers of 0.6 and 0.7, advance ratio of 0.2, positive and negative vortex rotation, and the vortex passing above and below the rotor blade by 0.25 rotor chords. The results show that the CFD qualitatively predicts the acoustic characteristics very well, but quantitatively overpredicts the peak-to-peak sound pressure level by 15 percent in most cases. There also exists a discrepancy in the phasing (about 4 deg) of the BVI event in some cases. Additional calculations were performed to examine the effects of vortex strength, thickness, time accuracy, and directionality. This study validates the TURNS code for prediction of near-field acoustic pressures of controlled parallel BVI.

McCluer, Megan S.↗

Redox Disproportionation of Glucose as a Major Biosynthetic Energy Source

Previous studies have concluded that very little if any energy is required for the microbial biosynthesis of amino acids and lipids from glucose -- processes that yield almost as much ATP (adenosine triphosphate) as they consume. However, these studies did not establish the strength nor the nature of the energy source driving these biological transformations. To identify and estimate the strength of the energy source behind these processes, we calculated the free energy change due to the redox disproportionation of substrate carbon of (a) 26 redox-balanced fermentation reactions, and (b) the biosynthesis of amino acids, lipids, and nucleotides of E. coli from glucose. A plot of the negative free energy of these reactions per mmole of carbon as a function of the number of disproportionative electron transfers per mmol of carbon showed that the energy yields of these fermentations and biosyntheses were directly proportional to the degree of redox disproportionation of carbon. Since this linear relationship showed that redox disproportionation was the dominant energy source of these reactions, we were able to establish that amino acid and lipid biosynthesis obtained most of their energy from redox disproportionation (greater than 94%). In contrast nucleotide biosynthesis was not driven by redox disproportionation of carbon, and consequently depended completely on ATP for energy. This crucial and previously unrecognized role of sugars as an energy source of biosynthesis suggests that sugars were involved at the earliest stage in the origin of anabolic metabolism.

Weber, Arthur L.↗

On Photospheric Fluorescence and the Nature of the 17.62 Angstrom Feature in Solar X-ray Spectra

The identification of the emission line feature at 17.62 Angstroms in solar x-ray spectra is re-examined. Using a Monte Carlo technique, we compute a realistic theoretical upper limit to the observed Fe L-alpha photospheric fluorescent line strength caused by irradiation from an overlying corona. These calculations demonstrate that the photospheric Fe L-alpha characteristic line is much too weak to account for the observed 17.62 Angstrom line flux. Instead, we identify this line with the configuration interaction 2s2p3p2P-2s2p6 2S transition in Fe XVIII seen in Electron Beam Ion Trap spectra and predicted in earlier theoretical work on the Fe XVIII x-ray spectrum.

Drake, Jeremy J.↗

Quantum Mechanical Determination of Potential Energy Surfaces for TiO and H2O

We discuss current ab initio methods for determining potential energy surfaces, in relation to the TiO and H2O molecules, both of which make important contributions to the opacity of oxygen-rich stars. For the TiO molecule we discuss the determination of the radiative lifetimes of the excited states and band oscillator strengths for both the triplet and singlet band systems. While the theoretical radiative lifetimes for TiO agree well with recent measurements, the band oscillator strengths differ significantly from those currently employed in opacity calculations. For the H2O molecule we discuss the current results for the potential energy and dipole moment ground state surfaces generated at NASA Ames. We show that it is necessary to account for such effects as core-valence Correlation energy to generate a PES of near spectroscopic accuracy. We also describe how we solve the ro-vibrational problem to obtain the line positions and intensities that are needed for opacity sampling.

Langhoff, Stephen R.↗

Actuated atomizer

An actuated atomizer is adapted for spray cooling or other applications wherein a well-developed, homogeneous and generally conical spray mist is required. The actuated atomizer includes an outer shell formed by an inner ring; an outer ring; an actuator insert and a cap. A nozzle framework is positioned within the actuator insert. A base of the nozzle framework defines swirl inlets, a swirl chamber and a swirl chamber. A nozzle insert defines a center inlet and feed ports. A spool is positioned within the coil housing, and carries the coil windings having a number of turns calculated to result in a magnetic field of sufficient strength to overcome the bias of the spring. A plunger moves in response to the magnetic field of the windings. A stop prevents the pintle from being withdrawn excessively. A pintle, positioned by the plunger, moves between first and second positions. In the first position, the head of the pintle blocks the discharge passage of the nozzle framework, thereby preventing the atomizer from discharging fluid. In the second position, the pintle is withdrawn from the swirl chamber, allowing the atomizer to release atomized fluid. A spring biases the pintle to block the discharge passage. The strength of the spring is overcome, however, by the magnetic field created by the windings positioned on the spool, which withdraws the plunger into the spool and further compresses the spring.

Tilton, Charles↗

LDRD conclusion poster - Synthesizing Heterometallic Uranium Single Crystals to Understand the Influence of the Secondary Metals on Uranyl Axial Bond Strength

Understanding how transition metals influenced the chemistry of lanthanide and actinide (f-element) materials is critical for advancing separation technologies, materials design, and coordination chemistry. This project examined how incorporating first-row transition metals affected the structural and spectroscopic properties of f-element coordination polymers. In uranium(VI)-based systems synthesized with 2,6-pyridinedicarboxylic acid (PDC) ligands, single-crystal X-ray diffraction and Raman spectroscopy revealed that the presence of transition metals shortened the uranyl axial bond and induced a blue shift in its symmetric stretching vibration—evidence of increased bond strength. Electronic structure analysis, including Density of States (DOS) calculations using density functional theory (DFT), revealed altered orbital overlaps and highlighted the role of transition metal d-orbitals in modulating bonding. Raman modes were modeled using truncated structural fragments in collaboration with the University of Notre Dame, and although the predicted frequencies were lower than experimental values, they remained within expected ranges. In parallel, similar experiments with cerium (Ce) in the presence of cobalt (Co) and PDC demonstrated multi-step single-crystal-to-single-crystal transformations—behavior not observed in the uranium systems. Initial products included light yellow, orange, and polycrystalline materials. Single-crystal X-ray diffraction studies, conducted in collaboration with the Colorado School of Mines, identified the yellow phase as monometallic Ce(PDC)2(H2O)2·4H2O and the orange phase as heterometallic Ce2Co(PDC)4(H2O)6. After standing in solution for one week, both phases fully transformed into a dark yellow crystalline phase, [Ce3(PDC)5(H2O)8].6(H2O). Remarkably, this transformation was reversible—disturbing the equilibrium by removing some crystals caused reversion to the initial Ce(PDC)2(H2O)2·4H2O phase, highlighting dynamic behavior. All three structures were previously unreported. Solid-state UV-visible and Raman spectroscopy further distinguished these phases, revealing ligand-to-metal charge transfer involving Ce and characteristic d–d transitions from Co(II). The precise mechanism driving these transformations remained unclear; however, pH-dependent experiments confirmed that the transformation did not occur when the pH decreased. Overall, the project demonstrated that transition metals could be employed to tune bonding interactions, structural dimensionality, and optical properties in f-element materials, establishing new pathways for designing functional heterometallic systems. The work resulted in several novel structural discoveries and fostered productive collaborations with the University of Notre Dame and the Colorado School of Mines.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗