Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SPECIFICATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

The application of radar imagery to specific problems of interior Alaska

The possible applications are discussed of side-looking airborne radar imagery to specific geomorphic and environmental geologic problems in interior Alaska. The radar imagery described was acquired in July, 1972, by the NASA NP3A aircraft, as part of Mission 209 of the Earth Resources Aircraft Project. The frequency of the radar energy that was transmitted and recorded by the radar system was 16.5 Gigahertz; the wavelength of the radiant energy was about 1.8 centimeters. The radar system operated in both the real aperture and synthetic aperture modes simultaneously.

Cannon, P. J.↗
NASA NTRS1976

SMS power and grounding. CEI part 1: Detail specification, type 1 data

This specification establishes the requirements for performance, design, test, and qualification of the SMS total power and grounding system. This is defined as designing a new PDU to be useable for SMS adding FBCS and modifying and adding to the OAS power systems, the emergency off system and the overheat warning system. The above design considers all S.O.W. requirements.

Source record↗
NASA NTRS1976

SMS crew station (C and D panels and forward structures). CEI part 1: Detail specification, type 1 data

Established are the requirements for performance, design, test and qualification of one type of equipment identified as SMS C&D panels and forward structures. This CEI is used to provide all hardware and wiring necessary for the C&D panels to be properly interfaced with the computer complex/signal conversion equipment (SCE), crew station, and software requirements as defined in other CEI specifications.

Source record↗
NASA NTRS1976

Mission Control Center (MCC) System Specification for the Shuttle Orbital Flight Test (OFT) Timeframe

System specifications to be used by the mission control center (MCC) for the shuttle orbital flight test (OFT) time frame were described. The three support systems discussed are the communication interface system (CIS), the data computation complex (DCC), and the display and control system (DCS), all of which may interfere with, and share processing facilities with other applications processing supporting current MCC programs. The MCC shall provide centralized control of the space shuttle OFT from launch through orbital flight, entry, and landing until the Orbiter comes to a stop on the runway. This control shall include the functions of vehicle management in the area of hardware configuration (verification), flight planning, communication and instrumentation configuration management, trajectory, software and consumables, payloads management, flight safety, and verification of test conditions/environment.

Source record↗
NASA NTRS1976

Shuttle payload interface verification equipment study. Volume 3: Specification data

A complete description is given of the IVE physical and performance design requirements as evolved in this study. The data are presented in a format to facilitate the development of an item specification. Data were used to support the development of the project plan data (schedules, cost, etc.) contained in Volume 4 of this report.

Source record↗
NASA NTRS1974

A Statistical Approach to Establishing Subsystem Environmental Test Specifications

Results are presented of a research task to evaluate structural responses at various subsystem mounting locations during spacecraft level test exposures to the environments of mechanical shock, acoustic noise, and random vibration. This statistical evaluation is presented in the form of recommended subsystem test specifications for these three environments as normalized to a reference set of spacecraft test levels and are thus suitable for extrapolation to a set of different spacecraft test levels. The recommendations are dependent upon a subsystem's mounting location in a spacecraft, and information is presented on how to determine this mounting zone for a given subsystem.

Keegan, W. B.↗
NASA NTRS1976

HAL/S-FC compiler system specifications

This document specifies the informational interfaces within the HAL/S-FC compiler, and between the compiler and the external environment. This Compiler System Specification is for the HAL/S-FC compiler and its associated run time facilities which implement the full HAL/S language. The HAL/S-FC compiler is designed to operate stand-alone on any compatible IBM 360/370 computer and within the Software Development Laboratory (SDL) at NASA/JSC, Houston, Texas.

Source record↗
NASA NTRS1976

NASA software specification and evaluation system design, part 1

The research to develop methods for reducing the effort expended in software and verification is reported. The development of a formal software requirements methodology, a formal specifications language, a programming language, a language preprocessor, and code analysis tools are discussed.

Source record↗
NASA NTRS1976

NASA software specification and evaluation system design, part 2

A survey and analysis of the existing methods, tools and techniques employed in the development of software are presented along with recommendations for the construction of reliable software. Functional designs for software specification language, and the data base verifier are presented.

Source record↗
NASA NTRS1975

Development of a solar-powered residential air conditioner: System optimization preliminary specification

Investigations aimed at the optimization of a baseline Rankine cycle solar powered air conditioner and the development of a preliminary system specification were conducted. Efforts encompassed the following: (1) investigations of the use of recuperators/regenerators to enhance the performance of the baseline system, (2) development of an off-design computer program for system performance prediction, (3) optimization of the turbocompressor design to cover a broad range of conditions and permit operation at low heat source water temperatures, (4) generation of parametric data describing system performance (COP and capacity), (5) development and evaluation of candidate system augmentation concepts and selection of the optimum approach, (6) generation of auxiliary power requirement data, (7) development of a complete solar collector-thermal storage-air conditioner computer program, (8) evaluation of the baseline Rankine air conditioner over a five day period simulating the NASA solar house operation, and (9) evaluation of the air conditioner as a heat pump.

Rousseau, J.↗
NASA NTRS1976

LUMIS Interactive graphics operating instructions and system specifications

The LUMIS program has designed an integrated geographic information system to assist program managers and planning groups in metropolitan regions. Described is the system designed to interactively interrogate a data base, display graphically a portion of the region enclosed in the data base, and perform cross tabulations of variables within each city block, block group, or census tract. The system is designed to interface with U. S. Census DIME file technology, but can accept alternative districting conventions. The system is described on three levels: (1) introduction to the systems's concept and potential applications; (2) the method of operating the system on an interactive terminal; and (3) a detailed system specification for computer facility personnel.

Bryant, N. A.↗
NASA NTRS1976

Detailed design specification for the ALT Shuttle Information Extraction Subsystem (SIES)

The approach and landing test (ALT) shuttle information extraction system (SIES) is described in terms of general requirements and system characteristics output products and processing options, output products and data sources, and system data flow. The ALT SIES is a data reduction system designed to satisfy certain data processing requirements for the ALT phase of the space shuttle program. The specific ALT SIES data processing requirements are stated in the data reduction complex approach and landing test data processing requirements. In general, ALT SIES must produce time correlated data products as a result of standardized data reduction or special purpose analytical processes. The main characteristics of ALT SIES are: (1) the system operates in a batch (non-interactive) mode; (2) the processing is table driven; (3) it is data base oriented; (4) it has simple operating procedures; and (5) it requires a minimum of run time information.

Clouette, G. L.↗
NASA NTRS1976

Payload specialist station study. Part 2: CEI specifications (part 1)

The performance, design, and verification specifications are established for the multifunction display system (MFDS) to be located at the payload station in the shuttle orbiter aft flight deck. The system provides the display units (with video, alphanumerics, and graphics capabilities), associated with electronic units and the keyboards in support of the payload dedicated controls and the displays concept.

Source record↗
NASA NTRS1977

Cold air investigation of 4 1/2-stage turbine with stage loading factor of 4.66 and high specific work output. 1: Overall performance

The turbine developed design specific work output at design speed at a total pressure ratio of 6.745 with a corresponding efficiency of 0.855. The efficiency (0.855)was 3.1 points lower than the estimated efficiency quoted by the contractor in the design report and 0.7 of a point lower than that determined by a reference prediction method. The performance of the turbine, which was a forced vortex design, agreed with the performance determined by the prediction method to about the same extent as did the performance of three reference high stage loading factor turbines, which were free vortex designs.

Whitney, W. J.↗
NASA NTRS1977

Preliminary analysis of aircraft fuel systems for use with broadened specification jet fuels

An analytical study was conducted on the use of broadened specification hydrocarbon fuels in present day aircraft. A short range Boeing 727 mission and three long range Boeing 747 missions were used as basis of calculation for one-day-per-year extreme values of fuel loading, airport ambient and altitude ambient temperatures with various seasonal and climatic conditions. Four hypothetical fuels were selected; two high-vapor-pressure fuels with 35 kPa and 70 kPa RVP and two high-freezing-point fuels with -29 C and -18 C freezing points. In-flight fuel temperatures were predicted by Boeing's aircraft fuel tank thermal analyzer computer program. Boil-off rates were calculated for the high vapor pressure fuels and heating/insulation requirements for the high freezing point fuels were established. Possible minor and major heating system modifications were investigated with respect to heat output, performance and economic penalties for the high freezing point fuels.

Pasion, A. J.↗
NASA NTRS1976

Atmospheric, Magnetospheric and plasmas in Space (AMPS) spacelab payload definition study; Volume 4: Part 3, Labcraft instrument systems general specification

Guidelines and general requirements applicable to the development of instrument flight hardware intended for use on the GSFC Shuttle Scientific Payloads Program are given. Criteria, guidelines, and an organized approach to specifying the appropriate level of requirements for each instrument in order to permit its development at minimum cost while still assuring crew safety, are included. It is recognized that the instruments for these payloads will encompass wide ranges of complexity, cost, development risk, and safety hazards. The flexibility required to adapt the controls, documentation, and verification requirements in accord with the specific instrument is provided.

Keeley, J. T.↗
NASA NTRS1976

Radar system specifications for hydrology and agriculture

Using truck-mounted radar spectrometers, an experimental program was conducted from 1971 to 1976 to define radar system specifications for hydrological and agricultural applications. Data were acquired over the 1-18 GHz region, 0 deg (nadir) to 70 deg range and for all linear polarization combinations. The discussion here concerns radar parameters for crop classification and for soil moisture determination.

Ulaby, F. T.↗
NASA NTRS1977

Space radar system specifications

System specifications are proposed for an imaging radar whose primary objective is to provide useful information for land applications including hydrology, agriculture and geology.

Ulaby, F. T.↗