Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILICATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Effect of Swift Heavy Ion Irradiation on Lithium Zinc Silicate Glasses: A Photoluminescence Study

Lithium zinc silicate glasses with and without copper were prepared by melt-quench method and their luminescence characteristics after swift heavy ion irradiation has been investigated. Based on these studies it is established that both these glasses contain colour centres and the luminescence from such centres get significantly quenched once these samples get irradiated with 100 MeV swift heavy Ag{sup +} ions with a fluence of 10{sup 13} ions/cm{sup 2} at room temperature. Trapping of the charge carriers by the increased defect concentration brought about by irradiation is responsible for the decrease in the luminescence intensity from the irradiated samples. Copper in these glasses mainly exists as Cu{sup +} ions as revealed by the broad emission around 500 nm.

36 MATERIALS SCIENCE↗

Infrared Spectroscopic Study For Structural Investigation Of Lithium Lead Silicate Glasses

Lithium lead silicate glasses with composition 30Li{sub 2}O{center_dot}(70-x)PbO{center_dot}xSiO{sub 2}(where, x = 10, 20, 30, 40, 50 mol %)(LPS glasses) were prepared by normal melt quench technique at 1373 K for half an hour in air to understand their structure. Compositional dependence of density, molar volume and glass transition temperature of these glasses indicates more compactness of the glass structure with increasing SiO{sub 2} content. Fourier transform infrared (FTIR) spectroscopic data obtained for these glasses was used to investigate the changes induced in the local structure of samples as the ratio between PbO and SiO{sub 2} content changes from 6.0 to 0.4. The observed absorption band around 450-510 cm{sup -1} in IR spectra of these glasses indicates the presence of network forming PbO{sub 4} tetrahedral units in glass structure. The increase in intensity with increasing SiO{sub 2} content (upto x = 30 mol %) suggests superposition of Pb-O and Si-O bond vibrations in absorption band around 450-510 cm{sup -1}. The values of optical basicity in these glasses were found to be dependent directly on PbO/SiO{sub 2} ratio.

36 MATERIALS SCIENCE↗

Silicate-free growth of high-quality ultrathin cerium oxide films on Si(111)

Ultrathin Ce{sub 2}O{sub 3} layers have been grown on Si(111) by reactive metal deposition in an oxygen background and characterized by x-ray standing waves, x-ray diffraction, x-ray photoelectron spectroscopy, and low-energy electron diffraction to elucidate and quantify both atomic structure and chemical composition. It is demonstrated that highly ordered, mostly B-oriented, epitaxial ceria films can be achieved by preadsorption of a monolayer of atomic chlorine, effectively passivating the substrate and thereby suppressing cerium silicate and silicon oxide formation at the interface.

36 MATERIALS SCIENCE↗

Oxygen isotopic investigation of silicic magmatism in the Stillwater caldera complex, Nevada: Generation of large-volume, low-δ 18 O rhyolitic tuffs and assessment of their regional context in the Great Basin of the western United States

Successive caldera-forming eruptions from ca. 30 to 25 Ma generated a large nested caldera complex in western Nevada that was subsequently dissected by Basin and Range extension, providing extraordinary cross-sectional views through diverse volcanic and plutonic rocks. A high-resolution oxygen isotopic study was conducted on units that represent all major parts of the Job Canyon, Louderback Mountains, Poco Canyon, and Elevenmile Canyon caldera cycles (29.2–25.1 Ma), and several Cretaceous plutons that flank the Stillwater caldera complex. We provide new oxygen and strontium isotope data for 12 additional caldera centers in the Great Basin, which are synthesized with >150 published oxygen and strontium isotope analyses for regional Mesozoic basement rocks. Stillwater zircons span a large isotopic range (δ 18 O zircon of 3.6‰–8.2‰), and all caldera cycles possess low-δ 18 O zircons. In some cases, they are a small proportion of the total populations, and in others, they dominate, such as in the low-δ 18 O rhyolitic tuffs of Job Canyon and Poco Canyon (δ 18 O zircon = 4.0‰–4.3‰; δ 18 O magma = 5.5‰–6‰). These are the first low-δ 18 O rhyolites documented in middle Cenozoic calderas of the Great Basin, adding to the global occurrence of these important magma types that fingerprint recycling of shallow crust altered by low-δ 18 O meteoric waters. The appearance of low-δ 18 O rhyolites in the Stillwater caldera complex is overprinted on a Great Basin–wide trend of miogeoclinal sediment contribution to silicic magmas that elevates δ 18 O compositions, making identification of 18 O depletions difficult. Though not a nominally low-δ 18 O rhyolite, the tuff of Elevenmile Canyon possesses both low-δ 18 O and high-δ 18 O zircon cores that are overgrown by homogenized zircon rims that approximate the bulk zircon average, pointing to batch assembly of isotopically diverse upper crustal melts to generate one of the most voluminous (2500–5000 km 3 ) tuff eruptions in the Great Basin. Despite overlapping in space and time, each caldera-forming cycle of the Stillwater complex has a unique oxygen isotope record as retained in single zircons. Most plutons that were spatially and temporally coincident with calderas have isotopic compositions that diverge from the caldera-forming tuffs and cannot be their cogenetic remnants.

58 GEOSCIENCES↗

Letter - X-ray diffraction and Mossbauer spectroscopy of Fe{sup 3+}-bearing Mg-silicate post-perovskite at 128-138 GPa.

The effect of ferric iron on the properties of Mg-silicate post-perovskite (PPv) were studied up to 138 GPa using synchrotron X-ray diffraction and Moessbauer spectroscopy. Our diffraction measurements revealed that the incorporation of Fe{sup 3+} has virtually no effect on the volume of PPv, in contrast to Fe{sup 2+}, which increases the volume. Therefore, incorporation of Fe{sup 3+} increases the density of PPv much more effectively than Fe{sup 2+}. Moessbauer spectroscopy suggests that Fe{sup 3+} enters PPv through charge-coupled substitution and is high spin in the bipolar prismatic site and low spin in the octahedral site (i.e., mixed spin state). Our results may have important implications for the gravitational stability of lower-mantle heterogeneities.

36 MATERIALS SCIENCE↗

Fundamental Study on Effects of Borate on the Sorption of Cesium ions to Calcium Silicate Hydrate - 18068

The effects of borate on the formation of calcium silicate hydrate (C-S-H) and the Cs sorption behavior were examined by the sorption experiments without drying process. C-S-H was prepared by mixing calcium oxide, fumed silica, and sodium-borate solution in a glove bag filled with nitrogen gas. The volume of sodium borate solution was 30 mL, in order to adjust the liquid/solid weight ratio to 20. The Ca/Si molar ratio of C-S-H was adjusted so as to be 0.4, 0.8, 1.2, and 1.6. The concentration of sodium borate was set to the range from 0 to 600 mM in the sample solution. The solution of cesium chloride was added to the each sample for setting the initial concentration of Cs ions to 1 mM. The samples were cured in a shaking chamber at 298 K and 120 strokes/min during 7 days. In addition, for estimating the curing-period dependencies, the curing period was set to the range from 0.5 to 28 days for the condition of 0 M or 400 M sodium borate. In the results, under the conditions of the borate concentration up to 200 mM, the sorption behavior of Cs ions to C-S-H was hardly different from those without borate, while the sorption ratio of Cs ions for the borate concentration of 400 mM or more decreased by down to 46% compared with the blank samples. However, the sorption ratio of Cs ions in the case of 400 mM borate increased and reached as much as that for the blank sample until 28 days. Besides, the Raman spectra of solid phase showed that the peak derived from boric acid or borate (calcium borate or calcium borosilicate hydrate) appeared under the high concentration conditions of borate, and the peak of the silica chain of C-S-H was weakened. Considering the practical concentration of borate and much longer period for the performance assessment of the solidified wastes, the immobilization properties for Cs ions of cementitious materials contained borate will be kept appropriately in the disposal system for low-level wastes. (authors)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Particle Size on Raman Signal Strength of Silicate Minerals

Understanding the effects of particle size is necessary for quantifying minerals in mixtures using Raman spectroscopy. Raman signal intensity is evaluated using six common silicate minerals (two olivines, two pyroxenes, and two feldspars) at 10 particle size ranges. For olivines and feldspars, the highest peak intensities are observed in samples with 38–63 and 63–106 μm particle sizes. There is no such consistent trend for the pyroxene samples, although the overall low signal strength complicates those measurements. In conclusion, Raman spectra of samples with varying particle sizes appear to be influenced by two competing effects: scattering from particle boundaries and effective sampling volume.

58 GEOSCIENCES↗

Structure and thermodynamics of calcium rare earth silicate oxyapatites, Ca 2 RE 8 (SiO 4 ) 6 O 2 (RE = Pr, Tb, Ho, Tm)

Calcium rare earth silicate oxyapatites, (Ca 2 RE 8 (SiO 4 ) 6 O 2 ), are of interest as components of glass-ceramic nuclear waste forms. To assess their long-term behavior in a geologic repository, it is essential to determine their structure and thermodynamic stability at relevant conditions. Here, in this work, we performed detailed structural and thermodynamic investigations on Ca 2 Pr 8 (SiO 4 ) 6 O 2 , Ca 2 Tb 8 (SiO 4 ) 6 O 2 , Ca 2 Ho 8 (SiO 4 ) 6 O 2 , and Ca 2 Tm 8 (SiO 4 ) 6 O 2 by high energy synchrotron powder X-ray diffraction combined with Rietveld analysis and high temperature oxide melt drop solution calorimetry. Enthalpies of formation from constituent oxides (ΔH f,ox ) were determined to be -765.1 ± 22.8 kJ/mol for Ca 2 Pr 8 (SiO 4 ) 6 O 2 ; -638.9 ± 20.5 kJ/mol for Ca 2 Tb 8 (SiO 4 ) 6 O 2 ; -643.3 ± 10.3 kJ/mol for Ca 2 Ho 8 (SiO 4 ) 6 O 2 ; and -403.2 ± 5.1 kJ/mol for Ca 2 Tm 8 (SiO 4 ) 6 O 2 . These thermodynamic parameters were used in assessing the thermochemical stability of these phases in the presence of water vapor from room temperature to 600 K, as encountered in the subsurface environments of a geological repository.

36 MATERIALS SCIENCE↗

Crystal structure, thermal expansivity, and elasticity of OH-chondrodite: Trends among dense hydrous magnesium silicates

Here, we report the structure and thermoelastic properties of OH-chondrodite. The sample was synthesized at 12 GPa and 1523 K, coexisting with hydroxyl-clinohumite and hydrous olivine. The Fe content Fe/(Fe+Mg) is 1.1 mol%, and the monoclinic unit-cell parameters are: a = 4.7459(2) Å, b = 10.3480(7) Å, c = 7.9002(6) Å, α = 108.702(7)°, and V = 367.50(4) Å3. At ambient conditions the crystal structure was refined in space group P 2 1 /b from 1915 unique reflection intensities measured by single-crystal x-ray diffraction. The volume thermal expansion coefficient was measured between 150 and 800 K, resulting in α V = 2.8(5)×10 -9 (K -2 ) × T + 40.9(7) × 10 -6 (K -1 ) – 0.81(3)(K)/T 2 , with an average value of 38.0(9)×10 -6 K -1 . Brillouin spectroscopy was used to measure a set of acoustic velocities from which all thirteen components (C ij ) of the elastic tensor were determined. The Voigt-Reuss-Hill average of the moduli yield for the adiabatic bulk modulus, K S 0 = 117.9(12) GPa, and for shear modulus, G 0 = 70.1(5) GPa. The Reuss bound on the isothermal bulk modulus (K T0 ) is 114.2(14) GPa. From the measured thermodynamic properties, the Grüneisen parameter (γ) is calculated to be 1.66(4). Fitting previous static compression data using our independently measured bulk modulus (isothermal Reuss bound) as a fixed parameter, we refined the first pressure derivative of the bulk modulus, K T ’ = 5.5(1). Systematic trends between H 2 O content and physical properties are evaluated among dense hydrous magnesium silicate (DHMS) phases along the forsterite-brucite join.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Distributions of Ag, Bi, and Sb as Minor Elements between Iron-Silicate Slag and Copper in Equilibrium with Tridymite in the Cu-Fe-O-Si System at T = 1250 °C and 1300 °C (1523 K and 1573 K)

New experimental data on the distributions of silver (Ag), bismuth (Bi), and antimony (Sb) between liquid iron-silicate slag and liquid copper metal in equilibrium with tridymite in the Cu-Fe-O-Si system at T = 1250 °C and 1300 °C (1523 K and 1573 K) have been obtained. The experimental methodology involved high-temperature equilibration, rapid quenching of the equilibrated phases, followed by direct measurement of the equilibrium phases with electron probe X-ray microanalysis (EPMA) for measurement of major element concentrations and laser ablation inductively coupled plasma mass spectrometry (LAICPMS) for the measurement of minor element concentrations. The 4-point test approach was employed to confirm the achievement of chemical equilibrium in the current study. Open-system equilibration on quartz substrates in controlled gas atmospheres (CO/CO{sub 2}/Ar) and closed-system equilibration in sealed quartz ampoules were used. The new experimental data resolve significant discrepancies found in previous studies and can be used as input for the development of thermodynamic databases for copper-making processes.

36 MATERIALS SCIENCE↗

Assessing the Influence of NaCl on the Reduction of a Siliceous Laterite Nickel Ore Under Caron Process Conditions

The reduction by hydrogen and the thermal decomposition of a siliceous nickel laterite ore in the presence of NaCl were studied using thermogravimetric analysis (TGA). Reduction tests on H{sub 2} atmosphere in rotary kiln were performed in the presence of NaCl and the product of the reaction was leached in ammoniacal solution. The presence of only 1 pct of NaCl in the furnace increased the nickel extraction values from ≈ 3 to ≈ 90 pct when the experiment was carried out at 850 °C. According to the results of X-ray diffractometry and TGA, the presence of NaCl in the system and the reducing atmosphere of H{sub 2} promote the segregation of nickel according to the following steps: (1) Nickel oxide reduction by hydrogen: NiO + H{sub 2(g)} → Ni + H{sub 2}O{sub (g)}. (2) Formation of HCl: Al{sub 2}SiO{sub 5} + 2NaCl + SiO{sub 2} + H{sub 2}O → 2HCl(g) + 2NaAlSiO{sub 4}. (3) Chlorination of metallic nickel by HCl: Ni + 2HCl{sub (g)} → NiCl{sub 2} + H{sub 2(g)}. (4) Reduction of nickel chloride by hydrogen: NiCl{sub 2} + H{sub 2(g)} → Ni + 2HCl{sub (g)}.

36 MATERIALS SCIENCE↗

The Electrochemical Corrosion Behavior of Plasma Electrolytic Oxidation Coatings Fabricated on Aluminum in Silicate Electrolyte

Plasma electrolytic oxidation (PEO) coatings were fabricated on the aluminum in silicate electrolyte. Microstructures and elemental compositions of these PEO coatings were examined by scanning electron microscopy (SEM) equipped with an energy-dispersive x-ray spectroscopy (EDS). Corrosion resistances of the coated samples were evaluated using the measurements of open-circuit potential (OCP), repetitive polarization and electrochemical impedance spectroscopy (EIS) in 3.5 wt.% NaCl solution. The results indicated that the PEO coatings not only act as a physical shield limiting the penetration of corrosive solution, but also establish an anodic location with high concentration of H{sup +} ions and other product ions as pitting corrosion begins. With the development of pitting corrosion, the accumulation of corrosion products inside the pits and pores of the coatings decreases the corrosion process effectively.

36 MATERIALS SCIENCE↗

The effect of pressure on tricalcium silicate hydration at different temperatures and in the presence of retarding additives

The hydration of tricalcium silicate (C{sub 3}S) is accelerated by pressure. However, the extent to which temperature and/or cement additives modify this effect is largely unknown. Time-resolved synchrotron powder diffraction has been used to study cement hydration as a function of pressure at different temperatures in the absence of additives, and at selected temperatures in the presence of retarding agents. The magnitudes of the apparent activation volumes for C{sub 3}S hydration increased with the addition of the retarders sucrose, maltodextrin, aminotri(methylenephosphonic acid) and an AMPS copolymer. Pressure was found to retard the formation of Jaffeite relative to the degree of C{sub 3}S hydration in high temperature experiments. For one cement slurry studied without additives, the apparent activation volume for C{sub 3}S hydration remained close to {approx} -28 cm{sup 3} mol{sup -1} over the range 25 to 60 C. For another slurry, there were possible signs of a decrease in magnitude at the lowest temperature examined.

02 PETROLEUM↗

Analysis of the surface of tricalcium silicate during the induction period by X-ray photoelectron spectroscopy

X-ray photoelectron spectroscopy allows the analysis of surface layers with a thickness of a few nanometers. The method is sensitive to the chemical environment of the atoms since the binding energy of the electrons depends on the chemical bonds to neighboring atoms. It has been applied to the hydration of tricalcium silicate (Ca{sub 3}SiO{sub 5}, C{sub 3}S) by analyzing a sample after 30 min of hydration. Also two references have been investigated namely anhydrous C{sub 3}S and intermediate phase in order to enable a quantitative evaluation of the experimental data. In the hydrated C{sub 3}S sample, the analyzed volume (0.2 mm{sup 2} surface by 13 nm depth) contained approximately 44 wt.% of C{sub 3}S and 56 wt.% of intermediate phase whereas C-S-H was not detected. Scanning Electron Microscopy data and geometric considerations indicate that the intermediate phase forms a thin layer having a thickness of approximately 2 nm and covers the complete surface instead of forming isolated clusters.

36 MATERIALS SCIENCE↗

Synthesis and nano-mechanical characterization of calcium-silicate-hydrate (C-S-H) made with 1.5 CaO/SiO{sub 2} mixture

In this study, calcium silicate hydrate (C-S-H) is synthesized and characterized. C-S-H slurry was made with calcium oxide (CaO) to micro-silica (SiO{sub 2}) mixture ratio of 1.5 and enough deionized water. The slurry was continuously mixed for 7 days, then the excess water was removed. Two methods of drying were implemented: one method used the standard d-dry technique and the other was equilibrated to 11% relative humidity (RH). The dried powders were characterized using thermo gravimetric analysis (TGA), X-ray diffraction analysis (XRDA), and {sup 29}Si magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. The stoichiometric formulas of synthetic C-S-H powders dried to d-dry and 11% RH in this study were approximated as C{sub 1.2}SH{sub 0.7} and C{sub 1.2}SH{sub 2.4} respectively. The powders were then compacted to create specimens with porosities similar to C-S-H in hydrated cement. The specimens underwent nanoindentation to mechanically characterize C-S-H. The experiments provide insight on the nanoscale mechanical characteristics of C-S-H.

36 MATERIALS SCIENCE↗

The di- and tricalcium silicate dissolutions

In this study, a specially designed reactor connected to an ICP spectrometer enabled the careful determination of the dissolution rates of C{sub 3}S, C{sub 2}S and CaO, respectively, over a broad range of concentration of calcium and silicates under conditions devoid of C–S–H. The kinetic laws, bridging the dissolution rates and the undersaturations, were obtained after extrapolation of rate zero allowing the estimation of the true experimental solubility products of C{sub 3}S (K{sub sp} = 9.6 · 10{sup −23}), C{sub 2}S (K{sub sp} = 4.3 · 10{sup −18}) and CaO (K{sub sp} = 9.17 · 10{sup −6}). The latter are then compared to the solubilities calculated from the enthalpies of formation. We propose that the observed deviations result from the protonation of the unsaturated oxygen atoms present at the surface of these minerals. Hydration rates measured in cement pastes or in C{sub 3}S pastes are in excellent agreement with the kinetic law found in this study for C{sub 3}S under conditions undersaturated with respect to C–S–H.

36 MATERIALS SCIENCE↗

New insights into water bonding during early tricalcium silicate hydration with quasielastic neutron scattering

New information on the water bonding during the first 36 h of hydration of tricalcium silicate was obtained using the high neutron flux at the sample position of the time-of-flight spectrometer (TOFTOF), FRM II in Garching, Germany, together with {sup 29}Si NMR and X-ray diffraction measurements. A rapid increase in the amount of constrained water was observed at the beginning of the induction period. This is attributed to the formation of an early C-S-H with a large specific surface area (around 800 m{sup 2}/g). During subsequent hydration, the amount of constrained water, as given by the total surface area of the hydration products, is controlled by (a) the formation of new metastable early C-S-H which increases total surface area and (b) polymerisation processes which reduce total surface area. The relative contribution of these processes varies during hydration.

36 MATERIALS SCIENCE↗

Effect of temperature on the microstructure of calcium silicate hydrate (C-S-H)

Temperature affects the properties of concrete through its effect on the hydration of cement and its associated microstructural development. This paper focuses on the modifications to C-S-H induced by isothermal curing between 5 and 60 °C. The results show that as the temperature increases (within the range studied) the C/S ratio of C-S-H changes only slightly, with a higher degree of polymerisation of silicate chains, but there is a significant decrease in its bound water content and an increase of apparent density of 25%. This increase seems to come from a different packing of C-S-H at the nanoscale. As a consequence of these changes, the microstructure of the cement paste is much coarser and porous, which explains the lower final strengths obtained by curing at elevated temperatures. -- Highlights: •C-S-H structure studied at the atomic level •Multiple analytical techniques used •Studies conducted at temperatures above and below normal temperatures.

36 MATERIALS SCIENCE↗