Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SAPPHIRE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Heteroepitaxy of group IV-VI nitrides by atomic layer deposition

Heteroepitaxial growth of selected group IV-VI nitrides on various orientations of sapphire (α-Al{sub 2}O{sub 3}) is demonstrated using atomic layer deposition. High quality, epitaxial films are produced at significantly lower temperatures than required by conventional deposition methods. Characterization of electrical and superconducting properties of epitaxial films reveals a reduced room temperature resistivity and increased residual resistance ratio for films deposited on sapphire compared to polycrystalline samples deposited concurrently on fused quartz substrates.

36 MATERIALS SCIENCE↗

Defects in paramagnetic Co-doped ZnO films studied by transmission electron microscopy

We study planar defects in epitaxial Co:ZnO dilute magnetic semiconductor thin films deposited on c-plane sapphire (Al{sub 2}O{sub 3}), as well as the Co:ZnO/Al{sub 2}O{sub 3} interface, using aberration-corrected transmission electron microscopy and electron energy-loss spectroscopy. Co:ZnO samples that were deposited using pulsed laser deposition and reactive magnetron sputtering are both found to contain extrinsic stacking faults, incoherent interface structures, and compositional variations within the first 3–4 Co:ZnO layers next to the Al{sub 2}O{sub 3} substrate. The stacking fault density is in the range of 10{sup 17} cm{sup −3}. We also measure the local lattice distortions around the stacking faults. It is shown that despite the relatively high density of planar defects, lattice distortions, and small compositional variation, the Co:ZnO films retain paramagnetic properties.

36 MATERIALS SCIENCE↗

Sharp semiconductor-to-metal transition of VO{sub 2} thin films on glass substrates

Outstanding phase transition properties of vanadium dioxide (VO{sub 2}) thin films on amorphous glass were achieved and compared with the ones grown on c-cut sapphire and Si (111) substrates, all by pulsed laser deposition. The films on glass substrate exhibit a sharp semiconductor-to-metal transition (∼4.3 °C) at a near bulk transition temperature of ∼68.4 °C with an electrical resistance change as high as 3.2 × 10{sup 3} times. The excellent phase transition properties of the films on glass substrate are correlated with the large grain size and low defects density achieved. The phase transition properties of VO{sub 2} films on c-cut sapphire and Si (111) substrates were found to be limited by the high defect density.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal orientation dependence of current-perpendicular-to-plane giant magnetoresistance of pseudo spin-valves with epitaxial Co{sub 2}Fe(Ge{sub 0.5}Ga{sub 0.5}) Heusler alloy layers

The magnetoresistive (MR) properties of Co{sub 2}Fe(Ge{sub 0.5}Ga{sub 0.5}) (CFGG) Heusler alloy-based current-perpendicular-to-plane giant magnetoresistance pseudo-spin-valves (PSVs) are investigated. The PSV films are epitaxially grown on a sapphire (112{sup ¯}0) substrate with an Ag or Cu spacer layer, and their magnetoresistive properties are compared with those of PSV grown on MgO(001) substrates. For substrates with an Ag spacer, the PSV with the (001)[110]{sub CFGG}//(001)[010]{sub Ag} interface grown on MgO(001) exhibits a higher MR output compared with the (110)[001]{sub CFGG}//(111)[11{sup ¯}0]{sub Ag} interface grown on sapphire (112{sup ¯}0). In contrast, a higher MR output is obtained using a Cu spacer with the (110)[001]{sub CFGG}//(111)[11{sup ¯}0]{sub Cu} interface. These results demonstrate that the MR outputs depend upon the crystal orientation at the interface, and that interfaces with a small misfit tend to exhibit a larger MR output. This indicates the influence of crystal orientation as well as lattice mismatch upon the interfacial spin scattering asymmetry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact of thermal stress on the piezoelectric and dielectric properties of PbTiO{sub 3} thick films on various substrates

The impact of thermal stress on the polarization, as well as dielectric and piezoelectric properties of (001) oriented PbTiO{sub 3} (PTO) thick films deposited on various substrates was investigated based on Landau-Devonshire thermodynamic model. The results showed that dielectric and piezoelectric properties of PTO films depend strongly on the thermal stress in PTO films decided by the deposition temperature T{sub G} and the thermal expansion coefficients' difference between PTO films and substrates. For IC-compatible substrates such as Si, c-sapphire, and a-sapphire that induce tensile in-plane thermal stresses, the dielectric and piezoelectric responses and tunabilities of PTO films were enhanced. Whereas for PTO films on MgO, compressive thermal in-plane stresses can degraded the dielectric and piezoelectric responses and tunabilities of the films.

36 MATERIALS SCIENCE↗

Autocorrelation measurement of femtosecond laser pulses based on two-photon absorption in GaP photodiode

Semiconductor materials which exhibit two-photon absorption characteristic within a spectral region of interest can be useful in building an ultra-compact interferometric autocorrelator. In this paper, we report on the evidence of a nonlinear absorption process in GaP photodiodes which was exploited to measure the temporal profile of femtosecond Ti:sapphire laser pulses with a tunable peak wavelength above 680 nm. The two-photon mediated conductivity measurements were performed at an average laser power of less than a few tenths of milliwatts. Its suitability as a single detector in a broadband autocorrelator setup was assessed by investigating the nonlinear spectral sensitivity bandwidth of a GaP photodiode. The highly favourable nonlinear response was found to cover the entire tuning range of our Ti:sapphire laser and can potentially be extended to wavelengths below 680 nm. We also demonstrated the flexibility of GaP in determining the optimum compensation value of the group delay dispersion required to restore the positively chirped pulses inherent in our experimental optical system to the shortest pulse width possible. With the rise in the popularity of nonlinear microscopy, the broad two-photon response of GaP and the simplicity of this technique can provide an alternative way of measuring the excitation laser pulse duration at the focal point of any microscopy systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structure and strain relaxation effects of defects in In{sub x}Ga{sub 1–x}N epilayers

The formation of trench defects is observed in 160 nm-thick In{sub x}Ga{sub 1–x}N epilayers with x≤0.20, grown on GaN on (0001) sapphire substrates using metalorganic vapour phase epitaxy. The trench defect density increases with increasing indium content, and high resolution transmission electron microscopy shows an identical structure to those observed previously in InGaN quantum wells, comprising meandering stacking mismatch boundaries connected to an I₁-type basal plane stacking fault. These defects do not appear to relieve in-plane compressive strain. Other horizontal sub-interface defects are also observed within the GaN pseudosubstrate layer of these samples and are found to be pre-existing threading dislocations which form half-loops by bending into the basal plane, and not basal plane stacking faults, as previously reported by other groups. The origins of these defects are discussed and are likely to originate from a combination of the small in-plane misorientation of the sapphire substrate and the thermal mismatch strain between the GaN and InGaN layers grown at different temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Angular-dependent Raman study of a- and s-plane InN

Angular-dependent polarized Raman spectroscopy was utilized to study nonpolar a-plane (11{sup ¯}20) and semipolar s-plane (101{sup ¯}1) InN epilayers. The intensity dependence of the Raman peaks assigned to the vibrational modes A{sub 1}(TO), E{sub 1}(TO), and E{sub 2}{sup h} on the angle ψ that corresponds to rotation around the growth axis, is very well reproduced by using expressions taking into account the corresponding Raman tensors and the experimental geometry, providing thus a reliable technique towards assessing the sample quality. The s- and a-plane InN epilayers grown on nitridated r-plane sapphire (Al{sub 2}O{sub 3}) exhibit good crystalline quality as deduced from the excellent fitting of the experimental angle-dependent peak intensities to the theoretical expressions as well as from the small width of the Raman peaks. On the contrary, in the case of the s-plane epilayer grown on non-nitridated r-plane sapphire, fitting of the angular dependence is much worse and can be modeled only by considering the presence of two structural modifications, rotated so as their c-axes are almost perpendicular to each other. Although the presence of the second variant is verified by transmission electron and atomic force microscopies, angular dependent Raman spectroscopy offers a non-destructive and quick way for its quantification. Rapid thermal annealing of this sample did not affect the angular dependence of the peak intensities. The shift of the E{sub 1}(TO) and E{sub 2}{sup h} Raman peaks was used for the estimation of the strain state of the samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Epitaxial growth of (1 1 1)-oriented spinel CoCr 2 O 4 /Al 2 O 3 heterostructures

High quality (1 1 1)-oriented CoCr 2 O 4 /Al 2 O 3 heterostructures were synthesized on the sapphire (0 0 0 1) single crystal substrates by pulsed laser deposition. The structural properties are demonstrated by in-situ reflection high energy electron diffraction, atomic force microscopy, X-ray reflectivity, and X-ray diffraction. X-ray photoemission spectroscopy confirms that the films possess the proper chemical stoichiometry. In conclusion, this work offers a pathway to fabricating spinel type artificial quasi-two-dimensional frustrated lattices by means of geometrical engineering.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electron transport in unipolar InGaN/GaN multiple quantum well structures grown by NH{sub 3} molecular beam epitaxy

Unipolar-light emitting diode like structures were grown by NH{sub 3} molecular beam epitaxy on c plane (0001) GaN on sapphire templates. Studies were performed to experimentally examine the effect of random alloy fluctuations on electron transport through quantum well active regions. These unipolar structures served as a test vehicle to test our 2D model of the effect of compositional fluctuations on polarization-induced barriers. Variables that were systematically studied included varying quantum well number from 0 to 5, well thickness of 1.5 nm, 3 nm, and 4.5 nm, and well compositions of In{sub 0.14}Ga{sub 0.86}N and In{sub 0.19}Ga{sub 0.81}N. Diode-like current voltage behavior was clearly observed due to the polarization-induced conduction band barrier in the quantum well region. Increasing quantum well width and number were shown to have a significant impact on increasing the turn-on voltage of each device. Temperature dependent IV measurements clearly revealed the dominant effect of thermionic behavior for temperatures from room temperature and above. Atom probe tomography was used to directly analyze parameters of the alloy fluctuations in the quantum wells including amplitude and length scale of compositional variation. A drift diffusion Schrödinger Poisson method accounting for two dimensional indium fluctuations (both in the growth direction and within the wells) was used to correctly model the turn-on voltages of the devices as compared to traditional 1D simulation models.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Epitaxial ZnO/LiNbO{sub 3}/ZnO stacked layer waveguide for application to thin-film Pockels sensors

We produced slab waveguides consisting of a LiNbO{sub 3} (LN) core layer that was sandwiched with Al-doped ZnO cladding layers. The ZnO/LN/ZnO stacked layers were grown on sapphire C-planes by electron cyclotron resonance (ECR) plasma sputtering and were subjected to structural, electrical, and optical characterizations. X-ray diffraction confirmed that the ZnO and LN layers were epitaxial without containing misoriented crystallites. The presence of 60°-rotational variants of ZnO and LN crystalline domains were identified from X-ray pole figures. Cross-sectional transmission electron microscopy images revealed a c-axis orientated columnar texture for LN crystals, which ensured operation as electro-optic sensors based on optical anisotropy along longitudinal and transversal directions. The interfacial roughness between the LN core and ZnO bottom layers as well as that between the ZnO top and the LN core layers was less than 20 nm, which agreed with surface images observed with atomic force microscopy. Outgrowth of triangular LN crystalline domains produced large roughness at the LN film surface. The RMS roughness of the LN film surface was twice that of the same structure grown on sapphire A-planes. Vertical optical transmittance of the stacked films was higher than 85% within the visible and infrared wavelength range. Following the approach adopted by Teng and Man [Appl. Phys. Lett. 56, 1734 (1990)], ac Pockels coefficients of r{sub 33} = 24-28 pm/V were derived for c-axis oriented LN films grown on low-resistive Si substrates. Light propagation within a ZnO/LN/ZnO slab waveguide as well as within a ZnO single layer waveguide was confirmed. The birefringence of these waveguides was 0.11 for the former and 0.05 for the latter.

36 MATERIALS SCIENCE↗

Rise and fall of ferromagnetism in O-irradiated Al{sub 2}O{sub 3} single crystals

In dilute magnetic semiconductors studies, sapphire was usually used as non-magnetic substrate for films. We observed weak ferromagnetic component in Al{sub 2}O{sub 3} single crystal substrate, and excluded the possibility of ferromagnetic contaminations carefully by inductively coupled plasma mass spectrometry and X-ray photoelectron spectroscopy. The ferromagnetism rise and fall during the process of annealing-oxygen irradiation-annealing of the sapphire. The ferromagnetic changes are consistent with Al-vacancy related defects detected by positron annihilation spectroscopy. With first-principle calculations, we confirm that Al-vacancy can introduce magnetic moment for 3 μB in Al{sub 2}O{sub 3} crystal and form stable V{sub Al}-V{sub Al} ferromagnetic coupling at room temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Self-assembly of ordered wurtzite/rock salt heterostructures—A new view on phase separation in Mg{sub x}Zn{sub 1−x}O

The self-assembled formation of ordered, vertically stacked rocksalt/wurtzite Mg{sub x}Zn{sub 1−x}O heterostructures by planar phase separation is shown. These heterostructures form quasi “natural” two-dimensional hetero-interfaces between the different phases upon annealing of MgO-oversaturated wurtzite Mg{sub x}Zn{sub 1−x}O layers grown by plasma-assisted molecular beam epitaxy on c-plane sapphire substrates. The optical absorption spectra show a red shift simultaneous with the appearance of a cubic phase upon annealing at temperatures between 900 °C and 1000 °C. Transmission electron microscopy reveals that these effects are caused by phase separation leading to the formation of a vertically ordered rock salt/wurtzite heterostructures. To explain these observations, we suggest a phase separation epitaxy model that considers this process being initiated by the formation of a cubic (Mg,Zn)Al{sub 2}O{sub 4} spinel layer at the interface to the sapphire substrate, acting as a planar seed for the epitaxial precipitation of rock salt Mg{sub x}Zn{sub 1−x}O. The equilibrium fraction x of magnesium in the resulting wurtzite (rock salt) layers is approximately 0.15 (0.85), independent of the MgO content of the as-grown layer and determined by the annealing temperature. This model is confirmed by photoluminescence analysis of the resulting layer systems after different annealing temperatures. In addition, we show that the thermal annealing process results in a significant reduction in the density of edge- and screw-type dislocations, providing the possibility to fabricate high quality templates for quasi-homoepitaxial growth.

36 MATERIALS SCIENCE↗

Al{sub 2}O{sub 3} as a suitable substrate and a dielectric layer for n-layer MoS{sub 2}

Sapphire (α-Al{sub 2}O{sub 3}) is a common substrate for the growth of single- to few-layer MoS{sub 2} films, and amorphous aluminium oxide serves as a high-κ dielectric gate oxide for MoS{sub 2} based transistors. Using density-functional theory calculations with a van der Waals functional, we investigate the structural, energetic, and electronic properties of n-layer MoS{sub 2} (n = 1and 3) on the α-Al{sub 2}O{sub 3} (0001) surface. Our results show that the sapphire stabilizes single-layer and tri-layer MoS{sub 2}, while having a negligible effect on the structure, band gap, and electron effective masses of MoS{sub 2}. This combination of a strong energetic stabilization and weak perturbation of the electronic properties shows that α-Al{sub 2}O{sub 3} can serve as an ideal substrate for depositing ultra-thin MoS{sub 2} layers and can also serve as a passivation or gate-oxide layer for MoS{sub 2} based devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Broadband nanophotonic waveguides and resonators based on epitaxial GaN thin films

We demonstrate broadband, low loss optical waveguiding in single crystalline GaN grown epitaxially on c-plane sapphire wafers through a buffered metal-organic chemical vapor phase deposition process. High Q optical microring resonators are realized in near infrared, infrared, and near visible regimes with intrinsic quality factors exceeding 50 000 at all the wavelengths we studied. TEM analysis of etched waveguide reveals growth and etch-induced defects. Reduction of these defects through improved material and device processing could lead to even lower optical losses and enable a wideband photonic platform based on GaN-on-sapphire material system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A 350-nm-band GaN/AlGaN multiple-quantum-well laser diode on bulk GaN

We have demonstrated the pulsed operation of a 350-nm-band ultraviolet laser diode with a vertical current path. The laser structure was grown on a (0001)-face bulk GaN substrate. The lasing wavelength was 356.6 nm and the peak output power reached to 10 mW from the one side of uncoated facets under pulsed current operation with a pulse duration of 10 ns and a repetition frequency of 5 kHz at room temperature. The GaN substrate is expected to provide a cleaved facet configuration leading to an excellent far-field pattern as well as an advantageous thermal management solution of the devices relative to sapphire substrates. The far-field pattern of actual device on GaN substrate has been improved dramatically compared with distorted one on that of sapphire substrates.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Onset of surface stimulated emission at 260 nm from AlGaN multiple quantum wells

We demonstrated onset of deep-ultraviolet (DUV) surface stimulated emission (SE) from c-plane AlGaN multiple-quantum well (MQW) heterostructures grown on a sapphire substrate by optical pumping at room temperature. The onset of SE became observable at a pumping power density of 630 kW/cm{sup 2}. Spectral deconvolution revealed superposition of a linearly amplified spontaneous emission peak at λ ∼ 257.0 nm with a full width at half maximum (FWHM) of ∼12 nm and a superlinearly amplified SE peak at λ ∼ 260 nm with a narrow FWHM of less than 2 nm. In particular, the wavelength of ∼260 nm is the shortest wavelength of surface SE from III-nitride MQW heterostructures to date. Atomic force microscopy and scanning transmission electron microscopy measurements were employed to investigate the material and structural quality of the AlGaN heterostructures, showing smooth surface and sharp layer interfaces. This study offers promising results for AlGaN heterostructures grown on sapphire substrates for the development of DUV vertical cavity surface emitting lasers (VCSELs)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-pressure high-temperature phase diagram of gadolinium studied using a boron-doped heater anvil

A boron-doped designer heater anvil is used in conjunction with powder x-ray diffraction to collect structural information on a sample of quasi-hydrostatically loaded gadolinium metal up to pressures above 8 GPa and 600 K. The heater anvil consists of a natural diamond anvil that has been surface modified with a homoepitaxially grown chemical-vapor-deposited layer of conducting boron-doped diamond, and is used as a DC heating element. Internally insulating both diamond anvils with sapphire support seats allows for heating and cooling of the high-pressure area on the order of a few tens of seconds. This device is then used to scan the phase diagram of the sample by oscillating the temperature while continuously increasing the externally applied pressure and collecting in situ time-resolved powder diffraction images. In the pressure-temperature range covered in this experiment, the gadolinium sample is observed in its hcp, αSm, and dhcp phases. Under this temperature cycling, the hcp → αSm transition proceeds in discontinuous steps at points along the expected phase boundary. From these measurements (representing only one hour of synchrotron x-ray collection time), a single-experiment equation of state and phase diagram of each phase of gadolinium is presented for the range of 0–10 GPa and 300–650 K.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗