Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Restore”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Results of the study of the vestibular apparatus and the functions of the perception of space in cosmonauts (pre- and post-flight observations)

The effect of the set of space flight factors caused a change in the activity of the vestibular apparatus and the spatial perception function. More significant and longer shifts were observed during expeditions of great duration. The detected disorders (increase in reactivity of the otolithic apparatus, decrease in sensitivity of the cupula receptor, deterioration in the perception accuracy, etc.) had a definite tendency to be restored. The primary damage to the otolithic reflex (changes were found in practically all the subjects) is probably caused by the specific effect of zero gravitation, and apparently, may be one of the trigger mechanisms for discrepancy in the activity of the sensory systems, disorders in the correcting function of the cerebellum, and central vestibular formations.

Yakovleva, I. Y.↗

LANDSAT supports data needs for EPA 208 planning

Excerpts from federal legislation and regulations mandating areawide waster treatment management as a means of restoring and maintaining the integrity of the nation's water are presented along with requirements for grants to the states for water quality planning, management, and implementation. Experiences using LANDSAT to identify nonpoint sources of water pollution as well as land/use/land cover features in South Dakota, Kentucky, Georgia, New Jersey, and Texas are described. Present activities suggest that this type of remote sensing is an efficient, effective tool for areawide water quality planning. Interaction with cognizant federal, state, and local government personnel involved in EPA section 208 planning activities can guide the development of new capabilities and enhance their utility and prospect for use.

Source record↗

Oscillations and pulsations

A theory to describe the observed photospheric 5 minute oscillations, chromospheric 3 minute oscillations, and possible motions of the interior with periods ranging from 40 to 160 minutes is discussed. It is similar to the theory of nonradial stellar oscillations developed to describe the low angluar order modes (one or two wavelengths around a circumference); however, the solar oscillations have thousands of wavelengths around a circumference. The properties of waves in stars, their restoring forces, periods and wavelengths, and their propagation and motions are discussed.

Leibacher, J. W.↗

Wave generation

There are three principal kinds of wave generation mechanisms, corresponding to each of the three conservation laws that govern fluid motions: a changing mass flux into a stable atmosphere; convective motion; and energy exchange between a wave and the surrounding atmosphere. These mechanisms are applied to three kinds of waves: acoustic, gravity, and Alfven waves. They are pure cases, distinguished by their different restoring forces pressure for acoustic waves, buoyancy for gravity waves, and magnetic tension for Alfven waves.

Stein, R. F.↗

Computer image processing and recognition

A systematic introduction to the concepts and techniques of computer image processing and recognition is presented. Consideration is given to such topics as image formation and perception; computer representation of images; image enhancement and restoration; reconstruction from projections; digital television, encoding, and data compression; scene understanding; scene matching and recognition; and processing techniques for linear systems.

Hall, E. L.↗

Conference on Applications of Digital Image Processing to Astronomy, Pasadena, Calif., August 20-22, 1980, Proceedings

The astronomic applications of non-military digital image processing are covered in this conference volume. Systems like CCD's, interactive data analysis facilities, stellar speckle interferometry, sky flux subsystems, guide star systems and various image processing systems are described. Techniques in photometry including filtering, automatic photometry, and image restoration are examined. Digital spectral analyses of galaxies, supernova remnants, stars and other celestial bodies are discussed together with algorithms developed to calibrate, clean up, enhance, and quantitatively analyze data. The techniques of image processing permit astronomers to make much more efficient use of their data for both subjective and quantitative analyses. Future missions, such as the Space Telescope, representing a vast data base are briefly covered.

Elliott, D. A.↗

SMM attitude control recovery

A description is given of the way in which the Modular Attitude Control System (MACS) onboard computer of the NASA Solar Maximum Mission (SMM) laboratory was reprogrammed, to restore attitude control for the SMM, after fuse failures permanently disabled all three of the MACS primary reaction wheels. Algorithms were developed which provided both a thermal- and power-safe, spin-stabilized mode and three-axis sun pointing, using the damaged primary wheels' backup skew wheel in a momentum-bias control scheme. Magnetic torquing was used in these algorithms for angular momentum vector magnitude and directional control.

Hoffman, H. C.↗

Applications of a new mass-driver concept

A description of the operating principles and requirements of a novel mass-driver concept is presented. The design obtains acceleration of payload bucket coils by means of transverse focussing from strong, off-axis restoring forces that are produced by drive coils operating in a 'pull-only' mode. The concept offers the unprecedented possibility of operating high-performance mass-drivers entirely within the limitations of existing commercial switching devices, such as silicon-controlled rectifiers, spark gaps, vacuum-triggered arcs or vacuum mechanical switches. Representative applications of the concept described are: (1) a large-diameter magnetic lunar launcher for payloads having autonomous maneuvering; (2) an intermediate-diameter launcher with long operational life; and (3) a reaction engine for orbit transfer of large, massive objects.

Oneill, G. K.↗

Magnetic Bearings Would Increase Pump Efficiency

Active feedback applied to bearings windings compensate for unbalanced forces. Helical-screw rotation compresses and transports gas charges, which subject shafts to forces tend to displace them from their equilibrium positions. Magnetic bearings restore shafts to equilibrium, lowering friction and increasing efficiency.

Studer, P. A.↗

Endurance test and evaluation of alkaline water electrolysis cells

Utilization in the development of multi-kW low orbit power systems is discussed. The following technological developments of alkaline water electrolysis cells for space power application were demonstrated: (1) four 92.9 cm2 single water electrolysis cells, two using LST's advanced anodes and two using LST's super anodes; (2) four single cell endurance test stands for life testing of alkaline water electrolyte cells; (3) the solid performance of the advanced electrode and 355 K; (4) the breakthrough performance of the super electrode; (5) the four single cells for over 5,000 hours each significant cell deterioration or cell failure. It is concluded that the static feed water electrolysis concept is reliable and due to the inherent simplicity of the passive water feed mechanism coupled with the use of alkaline electrolyte has greater potential for regenerative fuel cell system applications than alternative electrolyzers. A rise in cell voltage occur after 2,000-3,000 hours which was attributed to deflection of the polysulfone end plates due to creepage of the thermoplastic. More end plate support was added, and the performance of the cells was restored to the initial performance level.

Burke, K. A.↗

Vibration and buckling studies of pretensioned structures

Results of analyses and tests of a simple pretensional structure are presented. Linear finite element analysis correlated well with experimental small amplitude vibration data. The buckling and vibration behavior of a pretensional stayed column was studied in detail. The bifurcation buckling load was also predicted accurately. Postbuckling behavior of the column was unusual and results in a post buckling restoring force of only 1/64 the bifurcation buckling load. Interaction between lateral accelerations and compressive load creates isolated stay slackening at loads above 50 percent of the buckling load. Further research will be required to fully understand their impact on the use of pretensioned structures as large space structures.

Belvin, W. K.↗

Experiments on fuel heating for commercial aircraft

An experimental jet fuel with a -33 C freezing point was chilled in a wing tank simulator with superimposed fuel heating to improve low temperature flowability. Heating consisted of circulating a portion of the fuel to an external heat exchanger and returning the heated fuel to the tank. Flowability was determined by the mass percent of unpumpable fuel (holdup) left in the simulator upon withdrawal of fuel at the conclusion of testing. The study demonstrated that fuel heating is feasible and improves flowability as compared to that of baseline, unheated tests. Delayed heating with initiation when the fuel reaches a prescribed low temperature limit, showed promise of being more efficient than continuous heating. Regardless of the mode or rate of heating, complete flowability (zero holdup) could not be restored by fuel heating. The severe, extreme-day environment imposed by the test caused a very small amount of subfreezing fuel to be retained near the tank surfaces even at high rates of heating. Correlations of flowability established for unheated fuel tests also could be applied to the heated test results if based on boundary-layer temperature or a solid index (subfreezing point) characteristic of the fuel.

Friedman, R.↗

Rectification and enhancement of three severely distorted images of Jupiter's north polar region

A number of high-resolution images of Jupiter's northern hemisphere were received from the imaging photopolarimeter (IPP) aboard Pioneer 11 in 1974. Erratic scanning of the IPP caused severe distortions in three scientifically important images, which until now have never been satisfactorily restored. New rectification and enhancement techniques, implemented on up-to-date image processing hardware, yielding images of sufficient quality to enable full scientific exploitation of the photometric data are reported.

Strickland, R. N.↗

The recovery of the HEAO-2 observatory

In August 1980, the Second High Energy Astronomy Observatory suffered the simultaneous double failure of two gyros, leaving the observatory with one gyro less than what is required for operation. The function of the missing gyro was replaced to allow restoration of spacecraft operation by reprogramming the on-board computer to derive rate from star and sun sensors, and by utilizing complex procedures. Large sun sensor quantization, jump characteristics of the star tracker, and extremely limited computer memory capacity further complicated the problem. Recovery attempts continued for over three months, during which time a suitable rate algorithm was derived. Final verification of the technique was never completed, however, due to the unexpected revival of one of the failed gyros.

Rose, R. E.↗

The power spectral density of digital modulations transmitted over nonlinear channels

This paper examines by analytical methods the power spectral densities of digital modulations (in particular, staggered and unstaggered quadrature modulations) passed through band-limited nonlinear channels. Previously observed (by computer simulation or hardware measurement) behavior of such spectra with regard to the suppression or restoration of its sidelobes after passing through the nonlinearity is verified analytically. Several examples corresponding to specific quadrature modulations and filter-nonlinearity combinations are presented as illustrations of the general results.

Divsalar, D.↗

Lunar highland crustal models based on iron concentrations - Isostasy and center-of-mass displacement

Data is introduced on the iron concentrations of the lunar surface which have been refined by means of convolution corrections to restore the spatial resolution and contrast lost by the omnidirectional spectrometer. This refined iron data is synthesized with other orbital seismic, and lunar sample data to derive highland crustal density and thickness, and isostasy and lunar centers of mass models are examined in light of this new information. A model is developed by which highland crustal density is calculated for each highland region from orbital observations of Fe, Mg and Ti concentrations. The results of this model are presented numerically and graphically for 35 highland and two non-highland regions. Density and thickness results are then applied to two long-standing lunar problems: (1) the nature of highland isostasy, which is shown to be controlled by crustal thickness rather than density, and (2) the separation of the moon's mass and figure centers, which is shown to be due to the crustal thickness difference between the lunar near and far sides.

Haines, E. L.↗

Analytical and experimental vibration and buckling characteristics of a pretensioned stayed column

Modal vibration tests to determine lateral modes of vibration of a stayed column and static axial compression tests to determine the column's buckling and postbuckling behavior have been performed. Effects of stay tension levels and vibration-load interaction are presented. Two finite element models are used to analyze the column, a three-dimensional frame using NASTRAN and an equivalent two-dimensional frame using an exact dynamic stiffness matrix. Both analyses correlated well with the linear vibration and buckling experimental data. Results indicate premature buckling of the column due to vibration-load interaction and nonlinear oscillations due to stay slackening. Postbuckling behavior of the column is unusual because of stay slackening and results in a postbuckling restoring force of less than the bifurcation buckling load. Guidelines for design of pretensioned structures are presented which consider buckling, postbuckling and vibration behavior.

Belvin, W. K.↗