Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Relays”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Evaluation program for secondary spacecraft cells: Initial evaluation tests of General Electric Company 40.0 ampere-hour nickel-cadmium spacecraft cells for the tracking data relay satellite system

Five cells provided by NASA's Goddard Space Flight Center were evaluated at room temperature and pressure (25 C plus or minus 2 C) with discharges at the 2 hour rate. Measurements of the cell containers following test, indicated an average increase of .006 inches at the plate thickness. Average end of charge voltages and pressures, and capacity output in ampere hours were determined. Three cells exceeded the voltage requirements of 1.52 volts during both c/10 charges at 20 C. All cells exceeded the voltage requirement of 1.52 volts during the 0 C overcharge test, although their end charges were below 1.50 volts. The pressure requirement of 65 psia was exceeded by both pressure transducer cells during c/10 charges at 25 C and 20 C and also during the 0 C overcharge test. The cells with pressure transducers reached a pressure of 20 psia before reaching the voltage limit of 1.550 volts during the pressure versus capacity test, and exhibited a pressure decay of 2 psia during the last 30 minutes of the 1 hour open circuit stand. Average capacity was 51.3 ampere hours.

Harkness, J. D.↗
NASA NTRS1979

Error analysis for relay type satellite-aided search and rescue systems

An analysis is made of the errors in the determination of the position of an emergency transmitter in a satellite-aided search and rescue system. The satellite is assumed to be at a height of 820 km in a near-circular near polar orbit. Short data spans of four minutes or less are used. The error sources considered are measurement noise, transmitter frequency drift, ionospheric effects, and error in the assumed height of the transmitter. The errors are calculated for several different transmitter positions, data rates, and data spans. The only transmitter frequency used was 406 MHz, but the result can be scaled to different frequencies.

Marini, J. W.↗
NASA NTRS1980

Evaluation program for secondary spacecraft cells: Initial evaluation tests of General Electric Company 40.0 ampere hour nickel cadmium spacecraft cells for the tracking data relay satellite system

Average end of charge voltages and pressures, and capacity output in ampere hours are presented. Test limits specify those values at which a cell is to be terminated from charge or discharge. Requirements are based on past cell performance data. The requirement does not constitute a limit for discontinuance from testing. The nickel cadmium batteries were screened for internal shorts, low capacity, electrolyte leakage, or inability of any cell to recover its open circuit voltage above 1.150 volts during the internal short test.

Hall, S. W.↗
NASA NTRS1981

Tracking and Data Relay Satellite System (TDRSS) navigation with DSN radio metric data

The use of DSN radiometric data for enhancing the orbit determination capability for TDRS is examined. Results of a formal covariance analysis are presented which establish the nominal TDRS navigation performance and assess the performance improvement based on augmenting the nominal TDRS data strategy with radiometric data from DSN sites.

Ellis, J.↗
NASA NTRS1981

Study of liquid slosh in the tracking and data relay satellite hydrazine tanks

An experimental study was conducted to provide data for evaluation of the parameters for an analytical mechanical model representation of liquid/interface dynamics in the TDRSS propellant tanks. Models were developed for two liquid-under ullage (forward tank) configurations and for one liquid-over-ullage (aft tank) configuration. However, additional test runs were conducted with liquids of different densities in both cases to allow separation of bladder stiffness and gravity effects under various simulated steady acceleration conditions. Both static and dynamic parameters are evaluated to provide a good prediction of observed results.

Kana, D. D.↗
NASA NTRS1982

Measurement of total electron content of midlatitude ionosphere and protonosphere via Faraday rotation and group relay techniques using transmission from geostationary satellites ATS-3 and ATS-6

Measurement of integrated columnar electron content and total electron content for the local ionosphere and the overlying protonosphere via Faraday rotation and group delay techniques has proven very useful. A field station was established having the geographic location of 31.5 deg N latitude and 91.06 deg W longitude to accomplish these objectives. A polarimeter receiving system was set up in the beginning to measure the Faraday rotation of 137.35 MHz radio signal from geostationary satellite ATS 3 to yield the integrated columnar electron content of the local ionosphere. The measurement was continued regularly, and the analysis of the data thus collected provided a synopsis of the statistical variation of the ionosphere along with the transient variations that occurred during the periods of geomagnetic and other disturbances.

Paul, M. P.↗
NASA NTRS1981

NASA Communications Division (NASCOM) Tracking and Data Relay Satellite System (TDRSS) shuttle multiplexer-demultiplexer data system (MDM) and supporting items

The multiplexer-demultiplexer (MDM) project included the design, documentation, manufacture, and testing of three MDM Data Systems. The equipment is contained in 59 racks, and includes more than 3,000 circuit boards and 600 microprocessors. Spares, circuit card testers, a master set of programmable integrated circuits, and a program development system were included as deliverables. All three MDM's were installed, and were operationally tested. The systems performed well with no major problems. The progress and problems analysis, addresses schedule conformance, new technology, items awaiting government approval, and project conclusions are summarized. All contract modifications are described.

New, S. R.↗
NASA NTRS1982

Galileo probe relay receiver

For the Jovian mission, the data link from the Galileo probe to the orbiter uses suppressed-carrier Manchester encoded BPSK modulation and is protected with R = 1/2, K = 7 convolutional coding. The receiver closes the link by acquiring, tracking, and demodulating the data. It has to operate in a highly stressed environment with severe frequency offset, frequency rate, wind gust, and antenna spin conditions. Salient features are described and breadboard test data presented.

Prouty, D. A.↗
NASA NTRS1984

Design and fabrication of a CCD camera for use with relay optics in solar X-ray astronomy

Configured as a subsystem of a sounding rocket experiment, a camera system was designed to record and transmit an X-ray image focused on a charge coupled device. The camera consists of a X-ray sensitive detector and the electronics for processing and transmitting image data. The design and operation of the camera are described. Schematics are included.

Source record↗
NASA NTRS1986

Evaluation of spacecraft navigation using the Tracking and Data Relay Satellite System (TDRSS)

The navigational capabilities of the TDRSS for the operational support of user spacecraft is evaluated. A batch-weighted least-squares algorithm is used to fit tracking measurements and to generate orbit solutions for the TDRS-E spacecraft and the following user spacecraft: (1) the SMM, (2) the Landsat-5, (3) the Earth Radiation Budget Satellite (ERBS), and (4) the Solar Mesosphere Explorer (SME). TDRS-E orbit accuracy was evaluated by using the consistency of consecutive orbit solutions as a measure; user orbit accuracy was estimated by comparing orbits determined from TDRSS tracking with orbits obtained from ground tracking for the same time periods. It was found that the predicted accuracy of the TDRS-E orbit propagation was improved by as much as seven times by refining the spherical harmonic expansion model of the earth's potential field. The results obtained for SMM were fairly consistent, while those obtained for Landsat-5 were consistent to better than 80 meters. The orbits obtained using ERBS tracking were consistent to better than 60 meters and the SME orbits for two arcs with 14 and 20 passes of TDRSS tracking had a maximum position difference of 140 meters.

Samii, M. V.↗
NASA NTRS1986

Automated orbit determination using tracking and data relay satellite (TDRS) data

A prototype for an onboard satellite orbit determination system has been developed at the Goddard Space Flight Center (GSFC) to aid in the research and development of onboard navigation. Two versions of the system, one for laboratory investigation and one for ground demonstration, are being used to gain insight into the feasibility and practicality of microprocessor-based automated orbit determination. This paper describes the mathematical modeling and the software structure of each system and presents the results of laboratory evaluation in terms of computational accuracy and real-time processing performance.

Shank, D. E.↗
NASA NTRS1986

Tracking and Data Relay Satellite (TDRS) tracking and orbit determination

Analysis results were derived using the Goddard Trajectory Determination System to determine the orbit of TDRS-East. A batch weighted least-squares algorithm is used to fit the Bilateration Ranging Transponder system tracking measurements. Six state parameters (position and velocity components) and the solar radiation pressure coefficient are estimated. The solutions are obtained by fitting the data over 34 hr arcs that overlap by 10 hr. Ephemerides are generated over the 34 hr arcs and then compared over the overlapping regions. The position differences indicate the consistency of the solutions and give a measure of their accuracy. The effect of the modeling of perturbative forces (solar radiation pressure, nonspherical geopotential field) on these results are studied. Error analysis is performed using the ORAN program to estimate the effect of force-model errors and measurement-related errors on the TDRS-East ephemeris.

Teles, J.↗
NASA NTRS1987

Coordination of data relay satellite support

Interoperability as it relates to NASDA and ESA plans to implement S-band services compatible with that provided by TDRSS is discussed. The administrative and operational prerequisites for interoperability are introduced with attention given to coordination before and during the mission, and orbital slot planning. Areas for future technical discussions include a more detailed definition of the RF signal structures for achieving a coordinated S-band service and the examination of schemes (such as baseband cooling) which minimize interference while permitting the joint use of the S-band and promoting interoperability.

Sobieski, S.↗
NASA NTRS1986

The measured performance of a grazing incidence relay optics telescope for solar X-ray astronomy

The design, fabrication, and test performance of a grazing-incidence diverging magnifier (GIDM) for use in high-resolution X-ray imaging of the solar corona are described. The GIDM, designed to be mounted in front of the focus of a 30.48-cm Wolter-Schwarzschild primary, is an Ni-coated Be hyperboloid-hyperboloid structure of principal diameter 3.15 cm; the two components are mounted on a central steel plate which acts as a support and spacer. The combined instrument has overall length 1.9 m, effective focal length 5.4 m, and plate scale 26.0 micron/arcsec. In point- and line-source measurements in an 89.5-m vacuum test facility, the on-axis resolution is shown to be equal to that of the primary alone. The field of view for 1-arcsec resolution is limited to 1.25 arcmin in radius, but the effective-area limitation is less significant when CCD detectors of high quantum efficiency are used instead of film.

Moses, Dan↗
NASA NTRS1988

Very long baseline interferometry observations using the tracking and data relay satellite as an orbiting radio telescope

An antenna in geostationary orbit was used for VLBI observations at 2.3 GHz, in combination with ground antennas in Australia and Japan. 23 of the 25 observed sources were detected on orbiter-ground baselines, with baseline lengths as large as 2.15 earth diameters. Brightness temperatures between 10 to the 12th K and 4 x 10 to the 12th K were measured for 10 sources.

Linfield, R. P.↗