Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reduced Defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Defects activated photoluminescence in two-dimensional semiconductors: interplay between bound, charged and free excitons

Point defects in semiconductors can trap free charge carriers and localize excitons. The interaction between these defects and charge carriers becomes stronger at reduced dimensionalities, and is expected to greatly influence physical properties of the hosting material. We investigated effects of anion vacancies in monolayer transition metal dichalcogenides as two-dimensional (2D) semiconductors where the vacancies density is controlled by a-particle irradiation or thermal-annealing. We found a new, sub-bandgap emission peak as well as increase in overall photoluminescence intensity as a result of the vacancy generation. Interestingly, these effects are absent when measured in vacuum. We conclude that in opposite to conventional wisdom, optical quality at room temperature cannot be used as criteria to assess crystal quality of the 2D semiconductors. Our results not only shed light on defect and exciton physics of 2D semiconductors, but also offer a new route toward tailoring optical properties of 2D semiconductors by defect engineering.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reduction of Fermi level pinning and recombination at polycrystalline CdTe surfaces by laser irradiation

Laser processing of polycrystalline CdTe is a promising approach that could potentially increase module manufacturing throughput while reducing capital expenditure costs. For these benefits to be realized, the basic effects of laser irradiation on CdTe must be ascertained. In this study, we utilize surface photovoltage spectroscopy (SPS) to investigate the changes to the electronic properties of the surface of polycrystalline CdTe solar cell stacks induced by continuous-wave laser annealing. The experimental data explained within a model consisting of two space charge regions, one at the CdTe/air interface and one at the CdTe/CdS junction, are used to interpret our SPS results. The frequency dependence and phase spectra of the SPS signal are also discussed. To support the SPS findings, low-temperature spectrally-resolved photoluminescence and time-resolved photoluminescence were also measured. The data show that a modest laser treatment of 250 W/cm{sup 2} with a dwell time of 20 s is sufficient to reduce the effects of Fermi level pinning at the surface due to surface defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microscopic examination of rf-cavity-quality niobium films through local nonlinear microwave response

The performance of superconducting radio-frequency (SRF) cavities is sometimes limited by local defects. To investigate the rf properties of these local defects, especially those that nucleate rf magnetic vortices, a near-field magnetic microwave microscope is employed. Local third-harmonic response ( P 3 f ) and its temperature dependence and rf power dependence are measured for one Nb / Cu film grown by direct current magnetron sputtering (DCMS) and six Nb / Cu films grown by high-power impulse magnetron sputtering (HiPIMS) with systematic variation of deposition conditions. Five out of the six HiPIMS Nb / Cu films show a strong third-harmonic response that is likely coming from rf vortex nucleation due to a low- T c surface defect with a transition temperature between 6.3 and 6.8 K, suggesting that this defect is a generic feature of air-exposed HiPIMS Nb / Cu films. A phenomenological model of surface-defect grain boundaries hosting a low- T c impurity phase is introduced and studied with time-dependent Ginzburg-Landau (TDGL) simulations of probe-sample interaction to better understand the measured third-harmonic response. The simulation results show that the third-harmonic response of rf vortex nucleation caused by surface defects exhibits the same general features as the data, including peaks in third-harmonic response with temperature, and their shift and broadening with higher microwave amplitude. We find that the parameters of the phenomenological model (the density of surface defects that nucleate rf vortices and the depth an rf vortex travels through these surface defects) vary systematically with film deposition conditions. From the point of view of these two properties, the Nb / Cu film that is most effective at reducing the nucleation of rf vortices associated with surface defects can be identified. Published by the American Physical Society 2024

Wang, Chung-Yang (ORCID:0000000184299633)↗

Magnetotransport phenomena in Bi{sub 2}Se{sub 3} thin film topological insulators grown by hybrid physical chemical vapor deposition

Intrinsic defects in Bi{sub 2}Se{sub 3} topological insulators tend to produce a high carrier concentration and current leakage through the bulk material. Bi{sub 2}Se{sub 3} thin films were grown by hybrid physical chemical vapor deposition on (0001) Al{sub 2}O{sub 3} substrates with high Se vapor pressure to reduce the occurrence of Se vacancies as the main type of defect. Consequently, the carrier concentration was reduced to ∼5.75 × 10{sup 18} cm{sup −3} comparable to reported carrier concentration in Bi{sub 2}Se{sub 3} thin films. Magnetotransport measurements were performed on the films and the data were analyzed for weak anti-localization using the Hikami-Larkin-Nagaoka model. The estimated α and l{sub ϕ} values showed good agreement with the symplectic case of 2-D transport of topological surface states in the quantum diffusion regime. The temperature and angular dependence of magnetoresistance indicate a large contribution of the 2-D surface carriers to overall transport properties of Bi{sub 2}Se{sub 3} thin film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The defect-induced changes of the electronic and magnetic properties in the inverse Heusler alloy Ti{sub 2}CoAl

The first-principles calculations are performed to investigate the effect of swap, antisite and vacancy defects of three classes on the electronic and magnetic properties in the inverse Heusler alloy Ti{sub 2}CoAl of half-metallicity. Our calculations reveal that Ti(A/B)–Co and Co–Al swaps, Ti(A/B) and Al vacancy defects as well as Co{sub Ti(A)/Al} and Al{sub Ti(A)/Ti(B)} antisite defects are likely to form in a concentration as high as 12.5%. Among them, Co{sub Ti(A)} antisite is detected to be the most probable defect. It is shown that the spin polarizations of Ti{sub 2}CoAl are considerably reduced by the Ti(A/B)–Co swap and Ti(B)/Al vacancy defects, while a quite high spin polarization around 95% is observed in Co–Al swap as well as Ti(A) vacancy. Remarkably, all the likely antisite defects almost retain the half-metallic character in a concentration of 12.5% even if they have the possibility to form. However, induced by antisites, the Fermi levels shift to the edge of band gap with small peaks arising just above the Fermi level, which may destroy the half-metallicity by spin-flip excitation. - Graphical abstract: The spin polarization and formation energy of various possible defects in inverse Heusler alloy Ti{sub 2}CoAl. The triangle, star and square represent the swap, antisite and vacancy defects, respectively. - Highlights: • The swap, antisite, and vacancy defects are studied in half-metallic Ti{sub 2}CoAl. • The Co{sub Ti(A)} antisite is the most probable among the studied defects. • The antisite defects almost retain the half-metallicity. • Most of swap and vacancy defects have degraded the half-metallicity. • High spin polarizations are detected in Co–Al swap and Ti(A) vacancy defects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Influence of the InAlAs Layer Surface Morphology on the Temperature Dependence of Parameters of Au/Ti/n-InAlAs(001) Schottky Diodes

Growth-related structural defects present on the surface of InAlAs layers grown by molecular beam epitaxy on InP(001) substrates influence the temperature dependences of the current–voltage characteristics of Au/Ti/InAlAs Schottky barriers. It is established that these defects in the form of pits cause the appearance of regions with reduced barrier height. At a surface density of ≥10{sup 7} cm{sup –2}, these defects significantly influence the parameters of the Schottky barriers at temperatures below 200 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparative study of defect levels in GaInNAs, GaNAsSb, and GaInNAsSb for high-efficiency solar cells

Background doping and defect levels in GaInNAs, GaNAsSb, and GaInNAsSb solar cells with 1 eV band-gap are reported. Localized point defect induced traps were observed showing broadest defect distribution in GaInNAsSb. Incorporation of Sb reduced the unintentional p-type background doping by an order of magnitude, but increased the capture cross sections of deep levels by three orders of magnitude. The thermal activation energy of the dominating hole trap was increased from 350 meV for GaInNAs to 560 meV for GaNAsSb. Annealing of GaNAsSb solar cells improved the open circuit voltage from 280 mV to 415 mV, owing to the reduction in trap density.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multiscale Characterization of Additive Manufacturing Components with Computed Tomography, 3D X-ray Microscopy, and Deep Learning

Additive manufacturing (AM) facilitates the creation of complex-geometry parts, driving advancements in lightweight aerospace components, high-efficiency engine cooling channels, and customized medical implants. However, ensuring the quality and reliability of AM parts remains challenging due to internal defects, surface irregularities, porosity, and residual trapped powder, which are often inaccessible to traditional inspection methods. Recent developments in X-ray computed tomography (XCT) and 3D X-ray microscopy (XRM), particularly systems equipped with resolution-at-a-distance (RaaD™) capabilities, enable high-resolution, non-destructive evaluation of AM components across multiple scales, from sub-micrometer to macroscopic levels. This paper explores modern XCT and XRM techniques for multiscale characterization of AM parts, focusing on their ability to detect and analyze defects such as porosity, cracks, inclusions, and surface roughness, while offering insights into defect formation mechanisms, material properties, and process-induced variations. The integration of deep learning (DL) frameworks, including Simurgh, DeepRecon, and DeepScout, enhances XCT/XRM workflows by reducing scan times, improving resolution recovery, and enabling accurate defect detection even with limited projection data. These DL-based methods overcome limitations of traditional reconstruction techniques, enabling faster, more reliable characterization of dense materials like Inconel 718 and novel alloys such as AlCe. Applications include process parameter optimization, high-throughput quality control, and multistage AM process evaluation, with DL-enhanced workflows accelerating analysis times from weeks to days. Correlative imaging approaches further validate XCT and XRM data against scanning electron microscopy (SEM) images of physically sectioned samples, confirming the accuracy of DL-based reconstructions and enabling comprehensive defect analysis. While challenges remain in generalizing DL models to diverse materials and imaging conditions, improvements in resolution, noise reduction, and defect detection highlight the transformative potential of these methods. This multiscale and correlative approach enables precise identification and correlation of microstructural features with the overall performance of AM components. By integrating advanced XCT, XRM, and DL techniques, this paper demonstrates a significant leap forward in AM characterization, offering valuable insights into the relationships between processing parameters, microstructure, and part performance, and driving innovations that enhance the quality and reliability of AM products for demanding industrial applications.

Additive manufacturing↗

Elementary model of severe plastic deformation by KoBo process

Self-consistent model of generation, interaction, and annihilation of point defects in the gradient of oscillating stresses is presented. This model describes the recently suggested method of severe plastic deformation by combination of pressure and oscillating rotations of the die along the billet axis (KoBo process). Model provides the existence of distinct zone of reduced viscosity with sharply increased concentration of point defects. This zone provides the high extrusion velocity. Presented model confirms that the Severe Plastic Deformation (SPD) in KoBo may be treated as non-equilibrium phase transition of abrupt drop of viscosity in rather well defined spatial zone. In this very zone, an intensive lateral rotational movement proceeds together with generation of point defects which in self-organized manner make rotation possible by the decrease of viscosity. The special properties of material under KoBo version of SPD can be described without using the concepts of nonequilibrium grain boundaries, ballistic jumps and amorphization. The model can be extended to include different SPD processes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pure edge-dislocation half-loops in low-temperature Ga⁢N for V-defect formation

Lateral injection of carriers through semipolar crystallographic planes into c-plane QWs is one of the new frontiers in III-N light-emitting diodes (LEDs), especially for long wavelengths. Strategic use of V-defects has proven to be the most promising method for lateral injection, and creating optimal V-defect structure and density is an important research area for reducing forward voltage and increasing wall plug efficiency. Here, in this article, we present a novel method for forming V-defects in nominally unstressed low-temperature Ga⁢N through the generation of pure edge-dislocation half-loops. We present a detailed material science analysis of the loops via scattering-contrast electron microscopy. The loops have pure-edge character with Burgers vector 1/3 ⁢⟨$11\bar{2}0$⟩, and form in a sessile orientation on {$11\bar{2}0$} a-planes. The two arms of the loops are inclined such that the extra half-planes face down toward the growth substrate. The dislocation loops can be used to intentionally form V-defects through conditions of kinetically limited growth: these conditions also favor nucleation of V-defects at ∼100% of other threading dislocations in the Ga⁢N templates. Patterned sapphire substrates (PSS) are one of the most important substrates for III-N LED growth because of their superior light extraction. However, due to its low threading dislocation density, PSS have not been used extensively for V-defect LEDs. This work provides a pathway for improved control of V-defect formation and density on LEDs grown on sapphire with the goal of enabling uniform lateral injection in these V-defect engineered LEDs with low forward voltage, including PSS for high light extraction.

LEDs↗

Quantification of Shallow Defect Suppression in Aminosilane-Passivated Lead Halide Perovskites via Optical and Electrochemical Methods

We combine fluence-dependent photoluminescence (PL) and electrochemical characterization to estimate defect-dependent trapping rates, energetic distributions, and densities of defects, in lead halide perovskite films Cs 0.1 FA 0.9 PbI 3 and Cs 0.17 FA 0.83 Pb­(I 0.75 Br 0.25 ) 3 , before and after trap passivation with vapor-deposited (3-aminopropyl)­trimethoxysilane (APTMS). For both compositions, the PL studies show that energetically shallow subgap near-valence defect densities lead to bimolecular nonradiative recombination which is reduced by 92% after APTMS treatment. Electrochemical characterization of these same active layers shows for the first time that APTMS passivation impacts mainly on near-valence (mobile anionic) defects that decrease in density by 4 orders of magnitude, from 10 18 cm –3 to 10 14 cm –3 , as a result of silane modification. Here, the combination of PL and electrochemical characterization promises a unique approach to speciation and quantification of a broader distribution of trap states in perovskites and provides straightforward assessments of the efficacy of defect mitigation strategies.

Defects↗

Infrared thermography NDT for in-situ defect detection in sandwich composite panel manufacturing

Composite manufacturing presents numerous challenges, as defects can arise from various sources throughout the process. In sandwich composite structures, the integration of a foam core introduces additional complexity and increases the likelihood of defect formation like delamination. To mitigate these issues and reduce the risk of future structural failures, in-situ monitoring during manufacturing is essential. This study investigates infrared (IR) thermography as a non-destructive technique for detecting manufacturing defects in foam-core sandwich composite panels under thermally excited conditions representative of in-situ processing. A stationary FLIR A8590 IR camera (640 × 512 pixels, 30Hz, 17mm lens, 9 ft stand-off distance) was used to monitor prefabricated panels subjected to controlled external heating simulating compression molding and resin cure exotherm. Interlaminar delamination defects with characteristic sizes ranging from 0.25 × 0.25in² to 5 × 5in² produced measurable surface temperature depressions of approximately 4–10°C during transient cooling, exceeding the effective noise floor of the camera by more than two standard deviations. Thicker laminates exhibited prolonged defect detectability windows due to increased thermal diffusion time. In contrast, embedded Teflon inclusions generated weak thermal contrasts of ≤ 3°C, approaching the measurement noise floor, due to limited thermal property contrast with the surrounding glass fiber composite. These results establish quantitative detectability limits for stationary thermographic inspection of sandwich composite panels under manufacturing-representative thermal cycles.

Barakat, Abdallah [ORNL] (ORCID:0000000296141398)↗

Disruption of polyubiquitin gene Ubc leads to defective proliferation of hepatocytes and bipotent fetal liver epithelial progenitor cells

Highlights: •Proliferation capacity of Ubc{sup −/−} FLCs was reduced during culture in vitro. •Ubc is required for proliferation of both hepatocytes and bipotent FLEPCs. •Bipotent FLEPCs exhibit highest Ubc transcription and proliferation capacity. •Cell types responsible for Ubc{sup −/−} fetal liver developmental defect were identified. -- Abstract: We have previously demonstrated that disruption of polyubiquitin gene Ubc leads to mid-gestation embryonic lethality most likely due to a defect in fetal liver development, which can be partially rescued by ectopic expression of Ub. In a previous study, we assessed the cause of embryonic lethality with respect to the fetal liver hematopoietic system. We confirmed that Ubc{sup −/−} embryonic lethality could not be attributed to impaired function of hematopoietic stem cells, which raises the question of whether or not FLECs such as hepatocytes and bile duct cells, the most abundant cell types in the liver, are affected by disruption of Ubc and contribute to embryonic lethality. To answer this, we isolated FLCs from E13.5 embryos and cultured them in vitro. We found that proliferation capacity of Ubc{sup −/−} cells was significantly reduced compared to that of control cells, especially during the early culture period, however we did not observe the increased number of apoptotic cells. Furthermore, levels of Ub conjugate, but not free Ub, decreased upon disruption of Ubc expression in FLCs, and this could not be compensated for by upregulation of other poly- or mono-ubiquitin genes. Intriguingly, the highest Ubc expression levels throughout the entire culture period were observed in bipotent FLEPCs. Hepatocytes and bipotent FLEPCs were most affected by disruption of Ubc, resulting in defective proliferation as well as reduced cell numbers in vitro. These results suggest that defective proliferation of these cell types may contribute to severe reduction of fetal liver size and potentially mid-gestation lethality of Ubc{sup −/−} embryos.

60 APPLIED LIFE SCIENCES↗

Graphene materials having randomly distributed two-dimensional structural defects

Graphene-based storage materials for high-power battery applications are provided. The storage materials are composed of vertical stacks of graphene sheets and have reduced resistance for Li ion transport. This reduced resistance is achieved by incorporating a random distribution of structural defects into the stacked graphene sheets, whereby the structural defects facilitate the diffusion of Li ions into the interior of the storage materials.

36 MATERIALS SCIENCE↗

Graphene materials having randomly distributed two-dimensional structural defects

Graphene-based storage materials for high-power battery applications are provided. The storage materials are composed of vertical stacks of graphene sheets and have reduced resistance for Li ion transport. This reduced resistance is achieved by incorporating a random distribution of structural defects into the stacked graphene sheets, whereby the structural defects facilitate the diffusion of Li ions into the interior of the storage materials.

25 ENERGY STORAGE↗

Fermi Level Engineering of Passivation and Electron Transport Materials for p-Type CuBi 2 O 4 Employing a High-Throughput Methodology

Metal oxide semiconductors are promising for solar photochemistry if the issues of excessive charge carrier recombination and material degradation can be resolved, which are both influenced by surface quality and interface chemistry. Coating the semiconductor with an overlayer to passivate surface states is a common remedial strategy but is less desirable than application of a functional coating that can improve carrier extraction and reduce recombination while mitigating corrosion. Here, a data-driven materials science approach utilizing high-throughput methodologies, including inkjet printing and scanning droplet electrochemical cell measurements, is used to create and evaluate multi-element coating libraries to discover new classes of candidate passivation and electron-selective contact materials for p-type CuBi 2 O 4 . The optimized overlayer (Cu 1.5 TiO z ) improves the onset potential by 110 mV, the photocurrent by 2.8×, and the absorbed photon-to-current efficiency by 15.5% compared to non-coated photoelectrodes. It is shown that these enhancements are related to reduced surface recombination through passivation of surface defect states as well as improved carrier extraction efficiency through Fermi level engineering. This work presents a generalizable, high-throughput method to design and optimize passivation materials for a variety of semiconductors, providing a powerful platform for development of high-performance photoelectrodes for incorporation into solar-fuel generation systems.

36 MATERIALS SCIENCE↗

9R phase enabled superior radiation stability of nanotwinned Cu alloys via in situ radiation at elevated temperature

Nanotwinned metals exhibit outstanding radiation tolerance as twin boundaries effectively engage, transport and eliminate radiation-induced defects. However, radiation-induced detwinning may reduce the radiation tolerance associated with twin boundaries, especially at elevated temperatures. Here we show, via in-situ Kr ion irradiation inside a transmission electron microscope, that 3 at. % Fe in epitaxial nanotwinned Cu (Cu 97 Fe 3 ) significantly improves the thermal and radiation stability of nanotwins during radiation up to 5 displacements-per-atom at 200 °C. Such enhanced stability of nanotwins is attributed to a diffuse 9R phase resulted from the dissociation of incoherent twin boundaries in nanotwinned Cu 97 Fe 3 . The mechanisms for the enhanced stability of twin boundaries in irradiated nanotwinned alloys are discussed. As a result, the stabilization of nano-twins opens up opportunity for the application of nanotwinned alloys for aggressive radiation environments.

36 MATERIALS SCIENCE↗