Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reconfiguration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Automatic Navaids Checkout System

An automatic Navaids Checkout System for use in Space Shuttle development is discussed. The groundwork leading to the development is presented, followed by a description of the hardware. Finally, system utilization including operator interface and system software is discussed. The Navaids Checkout System is extremely flexible with capability to handle different test articles with a minimum of hardware reconfiguration. Application software is written in a high level user-oriented test language. The checkout system has been in operation for approximately one year with capability to handle VOR, ILS, TACAN, ATC Radar Beacon, and UHF/VHF communications equipment.

Belver, T. L.↗
NASA NTRS1977

Meta-assembler

Machine-independent cross-assembler program can produce object modules for variety of computers. Program is capable of being reconfigured by data set supplied at assembly time.

Hodges, B. C.↗
NASA NTRS1975

Design of a modular digital computer system, CDRL no. D001, final design plan

The engineering breadboard implementation for the CDRL no. D001 modular digital computer system developed during design of the logic system was documented. This effort followed the architecture study completed and documented previously, and was intended to verify the concepts of a fault tolerant, automatically reconfigurable, modular version of the computer system conceived during the architecture study. The system has a microprogrammed 32 bit word length, general register architecture and an instruction set consisting of a subset of the IBM System 360 instruction set plus additional fault tolerance firmware. The following areas were covered: breadboard packaging, central control element, central processing element, memory, input/output processor, and maintenance/status panel and electronics.

Easton, R. A.↗
NASA NTRS1974

A Functional Description of a Digital Flight Test System for Navigation and Guidance Research in the Terminal Area

A guidance, navigation, and control system, the Simulated Shuttle Flight Test System (SS-FTS), when interfaced with existing aircraft systems, provides a research facility for studying concepts for landing the space shuttle orbiter and conventional jet aircraft. The SS-FTS, which includes a general-purpose computer, performs all computations for precisely following a prescribed approach trajectory while properly managing the vehicle energy to allow safe arrival at the runway and landing within prescribed dispersions. The system contains hardware and software provisions for navigation with several combinations of possible navigation aids that have been suggested for the shuttle. The SS-FTS can be reconfigured to study different guidance and navigation concepts by changing only the computer software, and adapted to receive different radio navigation information through minimum hardware changes. All control laws, logic, and mode interlocks reside solely in the computer software.

Hegarty, D. M.↗
NASA NTRS1976

NASA advanced control technology: An overview

NASA's current and projected advanced control technology programs for future transport aircraft include the design and verification of full flight envelope autopilots, the development and flight test of all-digital fly by wire systems, the evolution of low cost innovative avionics concepts such as split surface stability augmentation systems, the evaluation of integrated propulsion control and cooperative autopilot/propulsion control systems, the application of active control systems to short haul and long haul transports, and the demonstration of reconfigured active control aircraft. Key technical features and anticipated contributions of these technologies are outlined.

Peter R Kurzhals↗
NASA NTRS1977

Aerodynamic configuration development of the highly maneuverable aircraft technology remotely piloted research vehicle

The aerodynamic development of the highly maneuverable aircraft technology remotely piloted research vehicle (HiMAT/RPRV) from the conceptual design to the final configuration is presented. The design integrates several advanced concepts to achieve a high degree of transonic maneuverability, and was keyed to sustained maneuverability goals while other fighter typical performance characteristics were maintained. When tests of the baseline configuration indicated deficiencies in the technology integration and design techniques, the vehicle was reconfigured to satisfy the subcritical and supersonic requirements. Drag-due-to-lift levels only 5 percent higher than the optimum were obtained for the wind tunnel model at a lift coefficient of 1 for Mach numbers of up to 0.8. The transonic drag rise was progressively lowered with the application of nonlinear potential flow analyses coupled with experimental data.

Gingrich, P. B.↗
NASA NTRS1977

Viking extended mission support

The period 1 March 1977 through 30 April 1977 is reported and includes Deep Space Network (DSN) Mark III data system testing. Status of the Viking DSN discrepancy reporting system as well as the status of Viking related tracking and command support were also considered. Operations support of Viking events and radio science activities were examined. Current progress on the major reconfiguration of the Network is presented in the context of support for the Viking extended mission.

Howe, T. W.↗
NASA NTRS1978

Coaxial isolator has versatile interface

Approach increases system-packaging flexibility. Isolators are constructed with removable connectors that can be changed to meet user's requirements. Technique reduces development scheduling problems. Isolators can be procured before package design is firm and then readily reconfigured to meet final design requirements. Changes to existing designs to incorporate removable connectors are minimal. Small adapter plates increase size modestly; weight increase is negligible.

Olsson, D. L.↗
NASA NTRS1978

A maintenance model for k-out-of-n subsystems aboard a fleet of advanced commercial aircraft

Proposed highly reliable fault-tolerant reconfigurable digital control systems for a future generation of commercial aircraft consist of several k-out-of-n subsystems. Each of these flight-critical subsystems will consist of n identical components, k of which must be functioning properly in order for the aircraft to be dispatched. Failed components are recoverable; they are repaired in a shop. Spares are inventoried at a main base where they may be substituted for failed components on planes during layovers. Penalties are assessed when failure of a k-out-of-n subsystem causes a dispatch cancellation or delay. A maintenance model for a fleet of aircraft with such control systems is presented. The goals are to demonstrate economic feasibility and to optimize.

Miller, D. R.↗
NASA NTRS1978

On reliable control system designs

A mathematical model for use in the design of reliable multivariable control systems is discussed with special emphasis on actuator failures and necessary actuator redundancy levels. The model consists of a linear time invariant discrete time dynamical system. Configuration changes in the system dynamics are governed by a Markov chain that includes transition probabilities from one configuration state to another. The performance index is a standard quadratic cost functional, over an infinite time interval. The actual system configuration can be deduced with a one step delay. The calculation of the optimal control law requires the solution of a set of highly coupled Riccati-like matrix difference equations. Results can be used for off-line studies relating the open loop dynamics, required performance, actuator mean time to failure, and functional or identical actuator redundancy, with and without feedback gain reconfiguration strategies.

Birdwell, J. D.↗
NASA NTRS1978

Optimum receiver structures for phase-multiplexed modulations

A MAP (maximum a posteriori) estimation loop is derived for a QPSK signal and, by suitable approximation to the nonlinearity which arises as a consequence of the MAP theory, is reconfigured with practical realizations that are valid for high and low SNRs. In particular, it is shown that by approximating the hyperbolic tangent nonlinearity in the MAP estimation loop by the first two terms in its power series, an interesting practical realization of this loop results which applies at low SNRs. The error signal in this loop is formed by multiplying the error signal and lock detector output signal of a conventional biphase Costas loop. A generalized linear in-phase channel configuration is proposed which allows carrier reconstruction from an unbalanced QPSK signal at all ratios of data rates and powers in the two channels, even in the limit as these ratios simultaneously approach unity, i.e., balanced quadriphase.

Simon, M. K.↗
NASA NTRS1979

Redundant system reliability analysis

Computer Aided Redundant System Reliability Analysis (CARSARA) program facilitates reliability assessment of fault-tolerance reconfigurable systems. CARSRA accounts for influences from transient faults and is used to model wide range of redundancy management strategies.

Masreliez, C. J.↗
NASA NTRS1980

RAM-Based frame synchronizer

Frame synchronizer for serial telemetry is rapidly reconfigured for changing formats. Synchronizer generates signals marking data-word boundaries, beginning of each frame, and beginning of each paragraph. Also derived are search, check, and lock status signals. Existing unit is assembled from standard random-access memory elements and MOS and low-power-Schottky logic.

Niswander, J. K.↗
NASA NTRS1979

The 10 to the 8th power bit solid state spacecraft data recorder

The results are summarized of a program to demonstrate the feasibility of Bubble Domain Memory Technology as a mass memory medium for spacecraft applications. The design, fabrication and test of a partially populated 10 to the 8th power Bit Data Recorder using 100 Kbit serial bubble memory chips is described. Design tradeoffs, design approach and performance are discussed. This effort resulted in a 10 to the 8th power bit recorder with a volume of 858.6 cu in and a weight of 47.2 pounds. The recorder is plug reconfigurable, having the capability of operating as one, two or four independent serial channel recorders or as a single sixteen bit byte parallel input recorder. Data rates up to 1.2 Mb/s in a serial mode and 2.4 Mb/s in a parallel mode may be supported. Fabrication and test of the recorder demonstrated the basic feasibility of Bubble Domain Memory technology for such applications. Test results indicate the need for improvement in memory element operating temperature range and detector performance.

Murray, G. W.↗
NASA NTRS1980

Evaluation of KU-band SPA and EA-1 software, task no. 2

The software for selected space shuttle components are examined for potential problem areas and possible suboptimal coding techniques. Errors discovered in the procedure termination routine are discussed. The technique used to store status flags is found not to be as efficient as possible, from both the standpoints of memory usage and processing time. Self-test routines are examined with the intent of providing a more detailed description of multiplexer/demultiplexer and display and control outputs. An example of a reconfiguration is presented with a block diagram to indicate the critical paths. A cross-reference table of status flags is given to aid in tracing the functional activity of software modules.

Dobbs, J.↗
NASA NTRS1980

Design of a modular digital computer system

A Central Control Element (CCE) module which controls the Automatically Reconfigurable Modular System (ARMS) and allows both redundant processing and multi-computing in the same computer with real time mode switching, is discussed. The same hardware is used for either reliability enhancement, speed enhancement, or for a combination of both.

Source record↗
NASA NTRS1979

Starlab ultraviolet /UV/ astronomy telescope facility

The paper describes a 1-m high-resolution wide field-of-view telescope (Starlab) to be used on board the Space Shuttle. The purpose of Starlab is to obtain optical astronomical observations in the UV domain of the spectrum. The discussion focuses on scientific programs and technical description of the Starlab. The use of photographic film and rapid reconfiguration is possible because Starlab is flown in the Shuttle-attached mode. The Starlab uses an f/15-modified Ritchey-Chretien telescope, followed by an instrument selector that gives access to the conventional Cassegrain focus or, by inserting a diagonal mirror, to a radial focal plane. Results of five critical subsystem-design studies confirm the feasibility of using state-of-the-art design practices in meeting the Starlab science and engineering requirements.

Richard, H. L.↗
NASA NTRS1979

SIFT - Multiprocessor architecture for Software Implemented Fault Tolerance flight control and avionics computers

A brief description of a SIFT (Software Implemented Fault Tolerance) Flight Control Computer with emphasis on implementation is presented. A multiprocessor system that relies on software-implemented fault detection and reconfiguration algorithms is described. A high level reliability and fault tolerance is achieved by the replication of computing tasks among processing units.

Forman, P.↗