Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reasoning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Hematite‐Based Solar Water Splitting in Acidic Solutions: Functionalization by Mono‐ and Multilayers of Iridium Oxygen‐Evolution Catalysts

Abstract Solar water splitting in acidic solutions has important technological implications, but has not been demonstrated to date in a dual absorber photoelectrochemical cell. The lack of functionally stable water‐oxidation catalysts (WOCs) in acids is a key reason for this slow development. The only WOCs that are stable at low pH are Ir‐based systems, which are typically too expensive to be implemented broadly. It is now shown that this deficiency may be corrected by applying an ultra‐thin monolayer of a molecular Ir WOC to hematite for solar water splitting in acidic solutions. The turn‐on voltage is observed to shift cathodically by 250 mV upon the application of a monolayer of the molecular Ir WOC. When the molecular WOC is replaced by a heterogeneous multilayer derivative, stable solar water splitting for over 5 h is achieved with near‐unity Faradaic efficiency.

Li, Wei↗
DOE OSTI2022

Determination and analysis of sex ratios in heme oxygenase 1 gene targeted mouse embryos

Abstract Heme oxygenase 1 or Hmox1 enzyme is involved in catalyzing the first and rate‐limiting step in heme breakdown reactions. Many studies have reported a partial lethality of Hmox1 knockout mice obtained from heterozygous breeding pairs. Similar results were obtained in our transgenic mice colony and a sex specific bias was observed in the favor of males in the adult mice. Hmox1 independent factors which could have caused this bias were initially analyzed and it was found that those factors were not a reason behind this anomaly. Certain studies involving gene knockout hinted toward a prenatal or neonatal lethality of female knockout mice embryos or pups, respectively. In order to check if this bias was occurring in embryonic stages, that is, either if mutant female embryos were dying or if heterozygous mothers were not carrying embryos to term, we analyzed the sex‐ratios in mid‐ and late‐gestational ages (9.5–13.5 dpc and 14.5–18.5 dpc, respectively). Our results did not indicate any significant difference in the sex ratios in embryonic stages; hence, it was concluded that females are not dying in embryonic stages. It can be speculated that these deaths were probably occurring at neonatal age. More studies are required to confirm that the lack of Hmox1 gene products is the sole reason for this female lethality.

Jain, Sidhant↗
DOE OSTI2023

Experimental and theoretical investigations of rotating algae biofilm reactors (RABRs): Areal productivity, nutrient recovery, and energy efficiency

Microalgae biofilms have been demonstrated to recover nutrients from wastewater and serve as biomass feedstock for bioproducts. However, there is a need to develop a platform to quantitatively describe microalgae biofilm production, which can provide guidance and insights for improving biomass areal productivity and nutrient uptake efficiency. Here, this paper proposes a unified experimental and theoretical framework to investigate algae biofilm growth on a rotating algae biofilm reactor (RABR). Experimental laboratory setups are used to conduct controlled experiments on testing environmental and operational factors for RABRs. We propose a differential–integral equation‐based mathematical model for microalgae biofilm cultivation guided by laboratory experimental findings. The predictive mathematical model development is coordinated with laboratory experiments of biofilm areal productivity associated with ammonia and inorganic phosphorus uptake by RABRs. The unified experimental and theoretical tool is used to investigate the effects of RABR rotating velocity, duty cycle (DC), and light intensity on algae biofilm growth, areal productivity, nutrient uptake efficiency, and energy efficiency in wastewater treatment. Our framework indicates that maintaining a reasonable light intensity range improves biomass areal productivity and nutrient uptake efficiency. Our framework also indicates that faster RABR rotation benefits biomass areal productivity. However, maximizing the nutrient uptake efficiency requires a reasonably low RABR rotating speed. Energy efficiency is strongly correlated with RABR rotating speed and DC.

09 BIOMASS FUELS↗
DOE OSTI2023

Implementation of AI/DEEP learning disruption predictor into a plasma control system

Abstract This paper reports on advances in the state‐of‐the‐art deep learning disruption prediction models based on the Fusion Recurrent Neural Network (FRNN) originally introduced in a 2019 NATURE publication [ https://doi.org/10.1038/s41586‐019‐1116‐4 ]. In particular, the predictor now features not only the “disruption score,” as an indicator of the probability of an imminent disruption, but also a “sensitivity score” in real time to indicate the underlying reasons for the imminent disruption. This adds valuable physics interpretability for the deep learning model and can provide helpful guidance for control actuators now implemented into a modern plasma control system (PCS). The advance is a significant step forward in moving from modern deep learning disruption prediction to real‐time control and brings novel AI‐enabled capabilities relevant for application to the future burning plasma ITER system. Our analyses use large amounts of data from JET and DIII‐D vetted in the earlier NATURE publication. In addition to “when” a shot is predicted to disrupt, this paper addresses reasons “why” by carrying out sensitivity studies. FRNN is accordingly extended to use more channels of information, including measured DIII‐D signals such as (i) the “n1rms” signal that is correlated with the n = 1 modes with finite frequency, including neoclassical tearing mode and sawtooth dynamics; (ii) the bolometer data indicative of plasma impurity control; and (iii) “q‐min”—the minimum value of the safety factor relevant to the key physics of kink modes. The additional channels and interpretability features expand the ability of the deep learning FRNN software to provide information about disruption subcategories as well as more precise and direct guidance for the actuators in a PCS.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Deficient precipitation sensitivity to Sahel land surface forcings among CMIP5 models

Abstract The overall performance of the simulated seasonal precipitation response to local terrestrial forcings, namely vegetation abundance and soil moisture, in the Sahel among the Coupled Model Intercomparison Project Phase Five (CMIP5) Earth System Models (ESMs) is systematically investigated and compared with its observational counterpart using a multivariate statistical method. The observed seasonal precipitation response is evaluated against a large ensemble of observational, reanalysis, and satellite data sets to provide quantification of uncertainties. The behaviour of models with and without a Dynamic Global Vegetation Model (DGVM) component is also explored, along with the mechanisms responsible for terrestrial feedback on rainfall. In general, the CMIP5 models can reasonably capture the seasonal evolution of Sahel precipitation and soil moisture, albeit with wet biases during the pre‐monsoon period and dry biases during the peak monsoon period. The non‐DGVM ESMs simulate comparable leaf area indices (LAIs) with observations, while DGVM‐enabled ESMs simulate too much year‐round LAI. The variance of precipitation that is attributed to oceanic forcings in CMIP5 is comparable with observations; however, the variance of precipitation that is attributed to terrestrial forcings is smaller in CMIP5 models than observed, especially for non‐DGVM ESMs. CMIP5 models, especially those without DGVMs, undervalue precipitation's observed response strength to soil moisture anomalies. In both observations and CMIP5 models, none of the atmospheric variables show significant responses to direct vegetation forcing, except for the response in transpiration. Although vegetation has minimal direct effect on the atmospheric state, it can affect the atmosphere by modifying soil moisture and transpiration rate indirectly, which helps explain the more realistic simulation of rainfall in DGVM‐enabled ESMs than non‐DGVM ESMs. Coupling of an ESM to a DGVM is critical in generating reasonable land–atmosphere feedback and examining future ecological and climatic changes over the Sahel.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

PV degradation curves: non‐linearities and failure modes

Abstract Photovoltaic (PV) reliability and durability have seen increased interest in recent years. Historically, and as a preliminarily reasonable approximation, linear degradation rates have been used to quantify long‐term module and system performance. The underlying assumption of linearity can be violated at the beginning of the life, as has been well documented, especially for thin‐film technology. Additionally, non‐linearities in the wear‐out phase can have significant economic impact and appear to be linked to different failure modes. In addition, associating specific degradation and failure modes with specific time series behavior will aid in duplicating these degradation modes in accelerated tests and, eventually, in service life prediction. In this paper, we discuss different degradation modes and how some of these may cause approximately linear degradation within the measurement uncertainty (e.g., modules that were mainly affected by encapsulant discoloration) while other degradation modes lead to distinctly non‐linear degradation (e.g., hot spots caused by cracked cells or solder bond failures and corrosion). The various behaviors are summarized with the goal of aiding in predictions of what may be seen in other systems. Published 2016. This article is a U.S. Government work and is in the public domain in the USA.

Jordan, Dirk C.↗
DOE OSTI2016

Towards retrieving critical relative humidity from ground-based remote sensing observations

Nearly all parameterisations of large-scale cloud require the specification of the critical relative humidity (RHcrit). This is the gridbox-mean relative humidity at which the subgrid fluctuations in temperature and water vapour become so large that part of a subsaturated gridbox becomes saturated and cloud starts to form. Until recently, the lack of high-resolution observations of temperature and moisture variability has hindered a reasonable estimate of the RHcrit from observations. However, with the advent of ground-based measurements from Raman lidar, it becomes possible to obtain long records of temperature and moisture (co-)variances with sub-minute sample rates. Lidar observations are inherently noisy and any analysis of higher-order moments will be very dependent on the ability to quantify and remove this noise. We present an exporatory study aimed at understanding whether current noise levels of lidar-retrieved temperature and water vapour are sufficient to obtain a reasonable estimate of the RHcrit. We show that vertical profiles of RHcrit can be derived for a gridbox length of up to about 30 km (120) with an uncertainty of about 4 % (2 %). RHcrit tends to be smallest near the scale height and seems to be fairly insensitive to the horizontal grid spacing at the scales investigated here (30 - 120 km). However, larger sensitivity was found to the vertical grid spacing. As the grid spacing decreases from 400 to 100 m, RHcrit is observed to increase by about 6 %, which is more than the uncertainty in the RHcrit retrievals.

Van Weverberg, Kwinten↗
DOE OSTI2016

John Grant and the multifaceted nature of true professionalism: Personal perspective

Consideration of the elements that contribute to professional and scientific impact is relevant in a volume honoring John Grant for two reasons. First, John has contributed in many ways to both advancing the methodology and the practical application of surface-analytical tools to understanding surfaces and interfaces of technological importance. The second reason is a little more complex. In an era when there is an effort to quantify contributions in various ways (e.g., citations, H-index, number of publications) and when social media seems, at least anecdotally, to lead a younger generation of scientists to be less involved in traditional professional activities, it is appropriate to examine the nature of the activities that make a lasting contribution to the advancement of science and technology and the professional community that makes progress possible. The multifaceted nature of John’s professional activities provides an appropriate background for exploring the nature of professionalism. With no reservations one can say that the foundation of professionalism is rooted in a scientist’s expertise in some area of research or practice. This expertise might be measured in numerous ways depending upon the field and could include numbers of publications, citations, patents, problems solved, research support obtained, or students produced. These “products” may or may not be readily visible to the community at large. Chuck Wagner – a pioneer in XPS, developer of an empirical set of XPS sensitivity factors and the modified Auger-parameter plot, and winner of the AVS Nerken Award in 1989 – observed that he could not publish or talk about 90% of the work he had done when working for Shell Oil. However, based on XPS capability developments that he could publish, he had a major impact on the development and application of XPS. To some degree John Grant’s research fits this model as well. Much of his early work at the Air Force Materials Research Laboratory was directed at solving materials problems and this important and often ground-breaking work was not published. However, a great deal of creativity and development was required to enable surface-sensitive tools such as AES and XPS to become useful for solving critical problems, and this work could be published.

Baer, Donald R.↗
DOE OSTI2017

Freestanding NiFe Oxyfluoride Holey Film with Ultrahigh Volumetric Capacitance for Flexible Asymmetric Supercapacitors

In this work, a freestanding NiFe oxyfluoride (NiFeOF) holey film was prepared by electrochemical deposition and anodic treatments. With the combination of good electrical conductivity and holey structure, the NiFeOF holey film offers superior electrochemical performance, due to the following reasons: (i) The residual metal alloy framework can be used as the current collector to improve electrode conductivity. Moreover, the as-prepared freestanding NiFeOF holey film can be used as a supercapacitor electrode without reliance on binders and other additives. The residual metal alloy framework and binder-free electrode effectively reduces electrode resistance, thus improving electron transport. (ii) The highly interconnected holey structure and hierarchical pore distribution provides a high specific surface area to improve electron transport, enhancing rapid ion transport and mitigating diffusion limitations throughout the holey film. (iii) The excellent mechanical characteristics facilitate flexibility and cyclability related performance. Additionally, the NiFeOF holey film presents exceptional electrochemical performance, showing that it is a promising alternative for small/micro-size electronic devices.

holey film↗
DOE OSTI2021

Influence of tower shadow on downwind flexible rotors: Field tests and simulations

Abstract As wind turbine rotors become larger, the blades become more flexible, requiring extra stiffness and cost to avoid the risk of tower strike. Wind turbines in a downwind configuration have a reduced risk of tower strike because the rotor thrust acts away from the tower. However, downwind blades pass through the wake of the tower, and the resulting load variation may contribute to blade fatigue. To date, there have been no field tests to quantify this tower shadow effect on unsteady blade moments. The present study reports on the first field testing of a flexible, downwind, coned rotor and compares the experimental data against simulations run in OpenFAST. The tower shadow effect is simulated using the conventional Powles model and a new Eames model (developed herein), which includes the influence of upstream turbulence. Both models reasonably predict the blade root out‐of‐plane bending moment data and the tower shadow dip magnitude when compared to field test data in Region 3. Tower shadow was found to increase the short‐term Damage Equivalent Loads (DELs) by less than 10% compared to other effects (gravity, shear, and turbulence), and the predictions were consistent with experiments. These results indicate that the tower shadow effect can be reasonably modeled with the simpler Powles model and that the tower shadow effect can be small compared to the effect of turbulence. However, long‐term fatigue due to tower shadow should be included in detailed structural analysis and design of the rotor and the tower.

Simpson, Juliet G.↗
DOE OSTI2019

Building a Wide-Area File Transfer Performance Predictor: An Empirical Study

Wide-area data transfer is central to geographically distributed scientific workflows. Faster delivery of data is important for these workflows. Predictability is equally (or even more) important. With the goal of providing a reasonably accurate estimate of data transfer time to improve resource allocation & scheduling for workflows and enable end-to-end data transfer optimization, we apply machine learning methods to develop predictive models for data transfer times over a variety of wide area networks. To build and evaluate these models, we use 201,388 transfers, involving 759 million files totaling 9 PB transferred, over 115 heavily used source-destination pairs (“edges”) between 135 unique endpoints. We evaluate the models for different retraining frequencies and different window size of history data. In the best case, the resulting models have a median prediction error of ≤21% for 50% of the edges, and ≤32% for 75% of the edges. We present a detailed analysis of these results that provides insights into the cause of some of the high errors. We envision that the performance predictor will be informative for scheduling geo-distributed workflows. The insights also suggest obvious directions for both further analysis and transfer service optimization.

Liu, Zhengchun↗
DOE OSTI2018

Evolution of the mean jet shape and dijet asymmetry distribution of an ensemble of holographic jets in strongly coupled plasma

Some of the most important experimentally accessible probes of the quark- gluon plasma (QGP) produced in heavy ion collisions come from the analysis of how the shape and energy of sprays of energetic particles produced within a cone with a specified opening angle (jets) in a hard scattering are modified by their passage through the strongly coupled, liquid, QGP. We model an ensemble of back-to-back dijets for the purpose of gaining a qualitative understanding of how the shapes of the individual jets and the asymmetry in the energy of the pairs of jets in the ensemble are modified by their passage through an expanding cooling droplet of strongly coupled plasma, in the model in a holographic gauge theory that is dual to a 4+1-dimensional black-hole spacetime that is asymptotically anti-de Sitter (AdS). We build our model by constructing an ensemble of strings in the dual gravitational description of the gauge theory. We model QCD jets in vacuum using strings whose endpoints are moving “downward” into the gravitational bulk spacetime with some fixed small angle, an angle that represents the opening angle (ratio of jet mass to jet energy) that the QCD jet would have in vacuum. Such strings must be moving through the gravitational bulk at (close to) the speed of light; they must be (close to) null. This condition does not specify the energy distribution along the string, meaning that it does not specify the shape of the jet being modeled. We study the dynamics of strings that are initially not null and show that strings with a wide range of initial conditions rapidly accelerate and become null and, as they do, develop a similar distribution of their energy density. We use this distribution of the energy density along the string, choose an ensemble of strings whose opening angles and energies are distributed as in perturbative QCD, and show that we can then fix one of the two model parameters such that the mean jet shape for the jets in the ensemble that we have built matches that measured in proton-proton collisions reasonably well. This is a novel way for hybridizing relevant inputs from perturbative QCD and a strongly coupled holographic gauge theory in the service of modeling jets in QGP. We send our ensemble of strings through an expanding cooling droplet of strongly coupled plasma, choosing the second model parameter so as to get a reasonable value for $R$ $^{AA}_{jet}$, the suppression in the number of jets, and study how the mean jet shape and the dijet asymmetry are modified, comparing both to measurements from heavy ion collisions at the LHC.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

An Adaptive Geometry-Free Thermo-Mechanical Model for Directed Energy Deposition Process Modeling

This presentation describes a novel, geometry-free thermo-mechanical model with adaptive subdomain con- struction to accurately predict the thermal conditions, distortions, and residual stresses throughout the directed energy deposition (DED) process. A novel finite element workflow is designed to con- duct the numerical analysis, based on the multi-app and data transfer capabilities in the open-source Multiphysics Object-Oriented Simulation Environment (MOOSE). Unlike with traditional methods, the part geometry in this model is not predefined. Instead, it is a combined effect of the processing parameters and material properties. At each time step, the model utilizes a subdomain construction paradigm to model the material deposition. A specialized mesh adaptivity scheme is incorporated to provide an accurate prediction while reducing the overall computational cost. The results generated by the proposed model show general agreement with the experimental measurements for the single track scan with varying processing parameters and demonstrate reasonable predictions for higher material buildups.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Seventeen Years’ Experience of Late Open Surgical Conversion after Failed Endovascular Abdominal Aortic Aneurysm Repair with 13 Variant Devices

PurposeTo investigate the causes and results of late open surgical conversion (LOSC) after failed abdominal aortic aneurysm repair (EVAR) and to summarize our 17 years’ experience with 13 various endografts.MethodsRetrospective data from August 1994 to January 2011 were analyzed at our center. The various devices’ implant time, the types of devices, the rates and causes of LOSC, and the procedures and results of LOSC were analyzed and evaluated.ResultsA total of 1729 endovascular aneurysm repairs were performed in our single center (Nuremberg South Hospital) with 13 various devices within 17 years. The median follow-up period was 51 months (range 9–119 months). Among them, 77 patients with infrarenal abdominal aortic aneurysms received LOSC. The LOSC rate was 4.5 % (77 of 1729). The LOSC rates were significantly different before and after January 2002 (p < 0.001). The reasons of LOSC were mainly large type I endoleaks (n = 51) that were hard to repair by endovascular techniques. For the LOSC procedure, 71 cases were elective and 6 were emergent. The perioperative mortality was 5.2 % (4 of 77): 1 was elective (due to septic shock) and 3 were urgent (due to hemorrhagic shock).ConclusionLarge type I endoleaks were the main reasons for LOSC. The improvement of devices and operators’ experience may decrease the LOSC rate. Urgent LOSC resulted in a high mortality rate, while selective LOSC was relatively safe with significantly lower mortality rate. Early intervention, full preparation, and timely LOSC are important for patients who require LOSC.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2014

Calibration of a convective parameterization scheme in the WRF model and its impact on the simulation of East Asian summer monsoon precipitation

Reasonably modeling the magnitude, south-north gradient and seasonal propagation of precipitation associated with the East Asian Summer Monsoon (EASM) is a challenging task in the climate community. In this study we calibrate five key parameters in the Kain-Fritsch convection scheme in the WRF model using an efficient importance-sampling algorithm to improve the EASM simulation. We also examine the impacts of the improved EASM precipitation on other physical process. Our results suggest similar model sensitivity and values of optimized parameters across years with different EASM intensities. By applying the optimal parameters, the simulated precipitation and surface energy features are generally improved. The parameters related to downdraft, entrainment coefficients and CAPE consumption time (CCT) can most sensitively affect the precipitation and atmospheric features. Larger downdraft coefficient or CCT decrease the heavy rainfall frequency, while larger entrainment coefficient delays the convection development but build up more potential for heavy rainfall events, causing a possible northward shift of rainfall distribution. The CCT is the most sensitive parameter over wet region and the downdraft parameter plays more important roles over drier northern region. Long-term simulations confirm that by using the optimized parameters the precipitation distributions are better simulated in both weak and strong EASM years. Due to more reasonable simulated precipitation condensational heating, the monsoon circulations are also improved. Lastly, by using the optimized parameters the biases in the retreating (beginning) of Mei-yu (northern China rainfall) simulated by the standard WRF model are evidently reduced and the seasonal and sub-seasonal variations of the monsoon precipitation are remarkably improved.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

TCSR Features Facilitating Safe Testing of 500 kV Power Transmission Lines

Reasons are examined for failures of gas-insulated circuit breakers on lines with shunt reactors that provide a level of line compensation close to 100%. It is shown that using a TCSR as a linear reactor makes it possible to eliminate the reason leading to failure of the circuit breaker in line testing.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Extraction of 88 Y, 152 Eu, 228 Ac, 241 Am, and 244 Cm with 2-thenoyltrifluoroacetone (TTA) resin

In this report the behavior of 88 Y, 152 Eu, 228 Ac, 241 Am, and 244 Cm was studied with 2-thenoyltrifluoroacetone resin with batch uptake, kinetics and column studies. Studies were performed in acetate buffer solutions (pH ~ 2 to ~ 6) and there was high uptake of all isotopes, except 228 Ac, at pH > 4.5. The kinetics of uptake were reasonable, although slower for the actinides, and sufficient for column studies. The retention of 88 Y, 152 Eu, and 241 Am on the resin in column studies was demonstrated as well as a reasonable separation of these isotopes from 228 Ac.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗