Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reaction Rates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Genetic algorithm optimization of a chemical kinetic mechanism for propane at engine relevant conditions

Propane has demonstrated significant potential for reductions in greenhouse gas and pollutant emissions in medium- and heavy-duty engine applications, but further improvements require accurate, compact, and scalable chemical kinetic mechanisms to design the next generation of propane fueled engines, particularly at the boosted operating conditions necessary to meet the power density demand of medium- and heavy-duty applications. In this work, six key chemical reactions were identified in a reduced mechanism with 70 species and 352 reactions through a sensitivity analysis performed at conditions typical of thermodynamic trajectories observed in a high compression ratio, long stroke engine operated on propane from throttled to boosted operating conditions. While the original mechanism was validated against rapid compression machine (RCM) data, it was found to overpredict experimental autoignition tendencies in 2-zone, 0-D SI engine simulations performed in Chemkin Pro. Subsequently, a genetic algorithm approach was used to optimize the six reaction rate parameters within established uncertainty bounds by performing RCM simulations and comparing to two independent sets of literature ignition delay times for propane, thus generating two new kinetic mechanisms. The first optimization achieved a mean absolute percent error (MPE) reduction in 2nd stage ignition delay of 61.4% in seven generations, while the second optimization utilized a newer experimental RCM dataset, and achieved MPE reduction of 56.7% in seven generations, and further marginal improvement to 57.8% reduction in 34 generations. Finally, the two mechanisms were then evaluated again in the 2-zone 0-D SI engine model in Chemkin Pro comparing typical mean and knocking cycle trajectories, and it was found that the second optimized mechanism provided better prediction of knock onset at the representative conditions evaluated in this work, particularly for higher load operating conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Skeletal reaction models for methane combustion

A local-sensitivity-analysis technique is employed to generate new skeletal reaction models for methane combustion from the foundational fuel chemistry model (FFCM-1). Here, the sensitivities of the thermo-chemical variables with respect to the reaction rates are computed via the forced-optimally time dependent (f-OTD) methodology. In this methodology, the large sensitivity matrix containing all local sensitivities is modeled as a product of two low-rank time-dependent matrices. The evolution equations of these matrices are derived from the governing equations of the system. The modeled sensitivities are computed for the auto-ignition of methane at atmospheric and high pressures with different sets of initial temperatures, and equivalence ratios. These sensitivities are then analyzed to rank the most important (sensitive) species. A series of skeletal models with different number of species and levels of accuracy in reproducing the FFCM-1 results are suggested. The performances of the generated models are compared against FFCM-1 in predicting the ignition delay, the laminar flame speed, and the flame extinction. The results of this comparative assessment suggest the skeletal models with 24 and more species generate the FFCM-1 results with an excellent accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Kinetic assessment of pulp mill-derived lime mud calcination in high CO 2 atmosphere

The chemical pulping of biomass involves the recycling of calcium through the calcination of lime mud, which is mostly comprised of calcium carbonate (CaCO 3 ). Lime mud decomposes under elevated temperatures to generate calcium oxide (CaO) and carbon dioxide (CO 2 ), the kinetics of which are strongly influenced by the CO 2 partial pressure and temperature. Oxy-fuel combustion and electrified lime kilns for lime mud calcination are intriguing methods to decarbonize this highly polluting operation within the biomass pulping industry. However, the high CO 2 concentration in oxy-fuel and electrified calcination processes alters the kinetics and overall reactivity of lime mud. For the first time, a model-fitting method is used to determine the kinetic parameters for lime mud calcination under a wide range of temperatures (550 °C–1250 °C) and under different concentrations of CO2 (0 %, 15 %, 50 %, and 90 %). A kinetic model is developed that accurately predicts the reaction rates as a function of temperature and CO 2 concentration. The apparent activation of energy for lime mud calcination is elevated under a high CO 2 environment. Relative to inert gas (N 2 , Ar), the temperature window for calcination is much smaller under high CO 2 environments. The presence of Na in lime mud does not seem to affect calcination under a high CO 2 environment. Finally, particle size variation does not have a significant effect on calcination under a high CO 2 environment.

09 BIOMASS FUELS↗
DOE OSTI2025

On the viability of stimulated hydrogen generation from iron-rich formations

Hydrogen-based technologies present a promising solution for the global energy transition. In addition to electrolytic production, subsurface geological formations provide a potential natural source of hydrogen. Iron-rich ultramafic rocks, in particular, are favorable for hydrogen generation through natural processes such as serpentinization. Naturally occurring reactions and migration can be enhanced through various types of stimulation, including thermal, hydraulic, and chemical treatment. Through numerical simulations, we analyzed the complex interplay of factors influencing the production and migration within the subsurface, emphasizing the importance of different stimulation techniques, catalysts, and conditions. Our findings indicate that key parameters, such as damage zone permeability and width, significantly impact producible hydrogen mass. Our results indicate that a combination of large damage zone widths, high permeability, and a stimulated reaction rate of 1 × 10 -9 can yield economically viable production rates of up to 1 kg s -1 at the wellhead. Moreover, the availability of ferrous iron, rather than the serpentinization rate itself, has been identified as the primary limiting factor in achieving economically sustainable hydrogen production. In conclusion, while an unstimulated rock volume of 0.165 km 3 yields only 45t of hydrogen in two years, various stimulation techniques can increase production to 18500t.

08 - HYDROGEN↗
DOE OSTI2022

In-situ microstructure observation of oxidized SiC layer in surrogate TRISO fuel particles under krypton ion irradiation

In accidental scenarios of high temperature gas-cooled reactors, both oxidation of and irradiation to the SiC layer in tri-structural-isotropic (TRISO) fuel particles can change the microstructure and integrity of the fuel elements. Here, in the present study, microstructure and defect evolution in the oxidized SiC layer of surrogate TRISO fuel particles under 1.2 MeV krypton ion irradiation was observed by in-situ transmission electron microscopy. The SiC layers oxidized in water vapor at 1200 °C were irradiated azt room temperature and 800 °C and at damage levels of 0.28–11.2 dpa, respectively. SiC and SiO 2 were found to still be in their crystal structures at the damage level of 11.2 dpa at 800 °C, while SiC was observed to have been amorphized at only 0.56 dpa irradiation at room temperature. The defect number density at 800 °C was an order of magnitude lower than that in the sample irradiated at room temperature. Also, crystalline SiO 2 had higher radiation resistance compared to SiC. A defect reaction rate theory was utilized to understand the fundamental defect evolution process and irradiation resistance difference.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

The interplay between surface facet and reconstruction on isopropanol conversion over SrTiO 3 nanocrystals

Strontium titanate (SrTiO 3 ) is an extensively investigated perovskite for various applications due to its optical, electrical and chemical properties. To gain an in-depth understanding of the active sites involved in heterogeneous catalysis over the broadly used SrTiO 3 (STO), we studied a model reaction, isopropanol conversion, on three differently shape-controlled nanocrystals: cube, truncated cube and dodecahedra. SEM, XRD and XPS confirmed the morphology, phase and composition of STO shapes. Low energy ion scattering (LEIS) revealed the occurrence of surface reconstruction over STO shapes during O 2 pretreatment at different temperatures. Based on the catalytic activities, scanning transmission electron microscopy images and density functional theory calculations, the step sites on STO derived from surface reconstruction were proposed to be the active sites for isopropanol conversion. This was further confirmed by steady state isotopic kinetic analysis (SSITKA) which demonstrated similar intrinsic turnover frequencies (TOFs) for the differently reconstructed STO shapes. It is concluded that the crystal facets impose an indirect effect on the catalysis of STO via controlling the degrees of surface reconstruction: the less stable STO (1 1 0) facet (dodecahedra) leads to more step sites after reconstruction and hence higher overall reaction rate than the more stable (1 0 0) facet (cube). This work highlights the important interplay between the crystal facet and surface reconstruction in controlling the nature and density of active sties and thus catalysis over complex oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Reprint of "Selective conversion of CO into ethanol on Cu(511) surface reconstructed from Cu(pc): Operando studies by electrochemical scanning tunneling microscopy, mass spectrometry, quartz crystal nanobalance, and infrared spectroscopy"

A polycrystalline copper, surface-terminated by a well-defined (511)-oriented facet, was electrochemically generated by a series of step-wise surface reconstruction and iterations of mild oxidative-reductive processes in 0.1 M KOH. The electrochemical reduction of CO on the resultant stepped surface was investigated by four surface-sensitive operando methodologies: electrochemical scanning tunneling microscopy (STM), electrochemical quartz crystal nanobalance (EQCN), differential electrochemical mass spectrometry (DEMS), and polarization-modulation infrared spectroscopy (PMIRS). The stepped surface catalyzed the facile conversion of CO into ethanol, the exclusive alcohol product at a low overpotential of -1.06 V (SHE) or - 0.3 V (RHE). Additionally, the chemisorption of CO was found to be a necessary prelude to ethanol production; i.e. the surface coverages, rather than solution concentrations, of CO and its surface-bound intermediates primarily dictate the reaction rates (current densities). Contrary to the expected predominance of undercoordinated step-site reactivity over the coordination chemistry of vicinal surfaces, vibrational spectroscopic evidence reveals the involvement of terrace-bound CO adsorbates during the multi-atomic transformations associated with the production of ethanol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Reductive removal of pertechnetate and chromate by zero valent iron under variable ionic strength conditions

Radioactive technetium-99 (Tc) present in waste streams and subsurface plumes at legacy nuclear reprocessing sites worldwide poses potential risks to human health and the environment. This research comparatively evaluated efficiency of zero valent iron (ZVI) toward reductive removal of Tc(VII) in presence of Cr(VI) from NaCl and Na 2 SO 4 electrolyte solutions under aerobic conditions. In both electrolytes, anticorrosive Cr(VI) suppressed oxidation of ZVI at elevated concentrations resulting in the delay of initiation of Tc(VII) reduction to Tc(IV)). In the absence of Cr(VI), no such delay was observed in the analogous systems. At low ionic strength, retarded ZVI oxidation inhibited Tc(VII) reduction in part due to the competing thermodynamically more favorable reduction of Cr(VI) to Cr(III); this effect was particularly pronounced in the chloride medium at the ionic strength ? 0.1. Higher ionic strength favored reduction of both Tc(VII) and Cr(VI), which followed a second-order reaction rate in both electrolytes attributed to the more efficient iron oxidation as evident from x-ray diffraction and electron microscopy measurements. Magnetite was the primary iron oxide phase, and its higher fraction in the SO 4 2- solutions facilitated reductive removal of Tc(VII) and Cr(VI). In the Cl- matrix, Cr(VI) promoted further oxidation of magnetite as well as formation of chromite diminishing overall reductive capacity of this system and resulting in less effective removal of Tc(VII) compared to the SO 4 2- solutions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Ductility evaluation of nitrided Zircaloy-4 cladding by ring compression testing

Here, this study evaluated the embrittlement of Zircaloy-4 cladding by dry air and dry nitrogen environments as a function of process temperature and duration of exposure. A Netzsch thermogravimetric analyzer was used to measure the mass gain of cladding sections over time with specified temperature and gas flow programs. Oxidation of Zircaloy in dry air produced a brittle ZrO 2 layer with ductile unreacted metal. In contrast, nitridation of Zircaloy had a slower reaction rate but produced a brittle cladding that was more easily breached during ring compression tests. The ring compression tests demonstrated that ductility of Zircaloy cladding decreases as nitrogen pickup increases; a ductile-to-brittle transition occurs near a mass gain of 2.1 wt %. Nitridation showed minimal temperature dependency in ductility degradation, whereas oxidation showed significant temperature dependency in ductility degradation, with severe embrittlement occurring at 1200 °C. Optical micrographs confirmed the formation of uniform ZrN layers (approximately 12 µm thick) on the cladding surface, indicating that cladding embrittlement is primarily the result of nitrogen diffusion rather than metal layer thinning.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Kinetic study of the azo – Hydrazone photoinduced mechanism in complexes with a -Re(CO) 3 L 0/+ core by flash photolysis

The photoprocesses of three rhenium(I) tricarbonyl complexes, fac-Re(NN)(CO) 3 L 0/+ , bearing an azo/hydrazone ligand, NN, and L = Cl, Br or CH 3 CN as axial ligand, were studied by time-resolved spectroscopic techniques. Flash irradiation of deaerated solutions of the complexes in acetonitrile photogenerated intermediates with intense optical absorptions in the UV–vis spectral region of the hydrazone ligand. The decay of the intermediates photogenerated with the Cl, Br and CH 3 CN ligands in the axial position proceeds by three different mechanisms. For the fac-Re(NN)(CO) 3 Cl, a three-step mechanism involving isomerization, tautomerization and rotation accounts for the spectroscopic transformations. In contrast to the flash photolysis result, the continuous photolysis of the complex in acetonitrile does not show spectroscopic changes associated with the generation of a stable product, i.e., the complex exhibits a photoreversible behavior. The first step observed in the flash irradiation of fac-Re(NN)(CO) 3 Cl, is missing in the decay of the photogenerated intermediates with fac-Re(NN)(CO) 3 Br and fac-[Re(NN)(CO) 3 CH 3 CN] + . A possible reason for this absence is that the process is too fast for the time-response of the flash photolysis set-up. Time-resolved spectra and associated reaction rate data for the Re(I) complexes are communicated and discussed. Finally, DFT calculations support a plausible E → Z mechanism with thermal back-isomerization mediated by tautomerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Analytical modeling for redox flow battery design

Deeper market penetration of redox flow batteries requires optimization of the cell performance. Though important for optimization, detailed analytical solutions have not been developed for electrolyte flow, mass and charge transport, and reaction kinetics within redox flow batteries. To this end, here we present analytical solutions to active species concentration and over-potential based on advection-diffusion transport for ions and Bulter-Volmer model for interface reaction kinetics. The solutions were validated with results from a finite element model. These solutions were then applied to investigate the relationship between over-potential and state of charge, current density, reaction rate constant, flow velocity, diffusivity, total active species concentration, and electrode structure. Explicit formulas were identified for minimum activation over-potential and limiting current density as well as their dependence on electrolyte properties, operation conditions, and electrode structure. With our new mathematical formulas, this work provides a theoretical framework for flow battery design.

25 ENERGY STORAGE↗
DOE OSTI2025

BBN-simple: How to bake a universe-sized cake

Big Bang Nucleosynthesis (BBN), the process of creation of lightest elements in the early universe, is a highly robust, precise, and ultimately successful theory that forms one of the three pillars of the standard hot-Big-Bang cosmological model. Existing theoretical treatments of BBN and the associated computer codes are accurate and flexible, but are typically highly technical and opaque, and not suitable for pedagogical understanding of the BBN. Here we present BBN-simple - a from-scratch numerical calculation of the lightest element abundances pitched at an advanced undergraduate or beginning graduate level. We review the physics of the early universe relevant for BBN, provide information about the reaction rates, and discuss computational-mathematics background that is essential in setting up a BBN calculation. Here, we calculate the abundances of the principal nuclear species in a standard cosmological model, and find a reasonably good agreement with public precision-level BBN codes.

Big bang nucleosynthesis↗
DOE OSTI2025

The upgraded summing NaI(Tl) (SuN++) absorption spectrometer

Simulations of astrophysical processes require a plethora of nuclear physics input. In particular, models of neutron-capture nucleosynthesis like the s, i, and r processes require β-decay information and experimentally constrained neutron-capture reaction rates. Past experiments with the 4π Summing NaI(Tl) (SuN) total absorption spectrometer have provided these physics quantities. Here, we outline an upgrade of SuN to SuN++, where 20 new segments (12 NaI(Tl) and 8 CeBr 3 ) have been integrated into the pre-existing SuN total absorption spectrometer to provide increased energy and time resolution in β-decay experiments. The details of the newly upgraded SuN++ total absorption spectrometer are discussed with results from the commissioning experiment at the Facility for Rare Isotope Beams (FRIB) utilizing a 70 Cu beam.

CeBr3↗
DOE OSTI2025

Ab initio calculations of scattering and fusion reactions

We review recent advancements achieved within the ab initio no-core shell model with continuum (NCSMC), a unified first-principle (or, ab initio) approach to nuclear bound and continuum states. We highlight its application to reactions of astrophysical interests, including the 7 Be(p, γ) 8 B solar fusion and α-α scattering, and to the structure of the exotic 12 Be nucleus. Furthermore, our findings provide a solid foundation for integrating ab initio calculations with experimental measurements, allowing for more precise evaluations of key thermonuclear reaction rates at astrophysical energies, and offer new insights into the factors that contribute to the emergence of clustering.

Quaglioni, Sofia [Lawrence Livermore National Labo↗
DOE OSTI2021

Methane generation from low-maturity coals and shale source rocks at low temperatures (80–120 °C) over 14–38 months

This study contributes long-term (14 to 38 months) experimental evidence for geocatalytically mediated methanogenesis in immature to early mature shale and coal source rocks at temperatures from 80 to 120 °C. Borosilicate glass tubes with pre-outgassed coal and shale source rock chips and water were sealed under vacuum, sterilized, heated isothermally, and finally opened in connection with a vacuum line where headspace gases methane (CH 4 ) and carbon dioxide (CO 2 ) were collected. The possibility of admitting pre-existing CH 4 from closed pores into product gases during heating experiments was evaluated by comparative ball milling of original and heated rock chips, followed by quantitation of released gases with a novel closed-circuit laser-based SARAD RTM2200 gas detector system with sub-µmol sensitivity. The yields of produced CH 4 from individual source rocks were corrected by subtracting the amounts of pre-existing CH 4 from formerly closed pores in original source rocks that had leaked during long-term heating. Different shales and coals express contrasting propensities to geocatalytically generate CH 4 and CO 2 , with CH 4 yields ranging from 0.1 to 5.5 µmol g-1 total organic carbon (TOC). CH 4 yields from two petrographically different samples of Springfield Coal with comparable thermal maturity suggest that liptinite expresses a far higher propensity for methanogenesis, but liberates less CO 2 than vitrinite. Shale from the Second White Specks Formation generated approximately 10 times more CH 4 than New Albany Shale per g of TOC, further suggesting complex controls on CH 4 generation during catalytic methanogenesis. Higher temperature can enhance the activities of catalytic methanogenesis. Here, the extrapolation of laboratory-based reaction rates to natural conditions in organic-rich buried sediments suggests that geocatalytic methanogenesis can be fast enough in some source rocks to generate economically sizeable gas plays from immature to early mature source rocks over geologic time.

03 NATURAL GAS↗
DOE OSTI2022

Diffusion-limited hydrolysis in polymeric materials

Polymer degradation under aggressive environmental stressors often develops heterogeneities due to diffusion-limited reaction phenomena. This is well established for diffusion-limited oxidation (DLO), which is known to occur for most polymeric materials at elevated temperatures but has been less summarized for the conditions of diffusion-limited hydrolysis (DLH). Here, an overview of hydrolysis for several materials and a computational model, analogous to the underlying equations for DLO, able to define this diffusion-reaction system is presented. A systematic study of the influence of various parameters, such as water diffusivity, reaction rate and order, and a more in-depth focus on residual isocyanate hydrolysis in a polymeric methylene diphenyl diisocyanate (pMDI) based polyurethane (PU) foam is given. For this system, we present experimental data for model ‘input’ parameters and discuss predictions for different conditions. We conceptually compare the behavior of diffusion-limited oxidation to that of diffusion-limited hydrolysis (DLH). With the mathematical framework and key material properties presented herein, any DLH phenomena following Fickian diffusion behavior can be understood, modeled, and predicted.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Insights on keto-hydroperoxide formation from O 2 addition to the beta-tetrahydrofuran radical

Cyclic ethers provide an interesting case study of low-temperature oxidation chemistry, especially in relevance to biofuels. A recent experimental study revealed new questions regarding the low-temperature oxidation mechanism of tetrahydrofuran (THF) concerning the formation of keto-hydroperoxides. In particular, keto-hydroperoxides originating from the THF-β radical were not captured accurately by current literature models, motivating this work to calculate the energetics of the first and second O 2 -addition pathways for THF radicals. Electronic structure calculations at the CCSD(T)/cc-pV∞Z//M06-2X/cc-pVTZ level of theory were used to generate potential energy surfaces for the α-C and β-C THF radicals and subsequent pathways to the formation of the keto-hydroperoxide isomers. These are the first theoretical calculations of the second O 2 -addition radical pathways for the THF-β radical. Results from the theorical work provided further insight into the low-temperature oxidation of THF. This included identifying the pathways most likely to form the keto-hydroperoxide isomers observed in prior experimental work; and detecting that the shortcomings in prior models are likely due to uncertainties in R + THF abstraction reaction rates. Here, these conclusions will motivate future work for accurate THF kinetic model development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Hydroxypyridinone-based stabilization of Np(IV) enabling efficient U/Np/Pu separations in the Adapted PUREX process

The classical process to recover uranium (U) and plutonium (Pu) from used nuclear fuel using tributyl phosphate (TBP), namely the Plutonium Uranium Redox EXtraction (PUREX) process, is complicated by the persistent presence of neptunium (Np) and thus requires extra purification steps. The concept of Adapted PUREX seeks to achieve Np recovery by adjusting the valence of the metal more effectively, thereby controlling its behavior more precisely. This study introduces the use of an aqueous hydroxypyridinone chelator, 3,4,3-LI(1,2-HOPO) (abbreviated as HOPO), to dictate the behavior of Np for recovery and meanwhile simplify cumbersome reprocessing steps. The interactions between Np and HOPO were probed mechanistically by way of absorption spectrophotometry, in conjunction with cyclic voltammetry. UV–Vis-NIR spectra illustrated the reduction of NpO 2 2+ to Np 4+ , with a fast reaction rate. Cyclic voltammetry revealed quasi-reversible processes between the oxidized and reduced forms of the ligand and its Np complexes. The corresponding heterogeneous rate constants (k 0 ) were estimated from the peak-to-peak separation potentials (ΔE p ), at ~ 4 – 35 μm/s for both HOPO and NpHOPO, with scan rates of 0.01 – 0.4 V/s. Meanwhile, the electromotive force (E MF ) as well as the change of Gibbs free energy (ΔG) were assessed from the half-wave potential (E 1/2 ), demonstrating the completeness of NpO 2 2+ reduction to Np 4+ by HOPO. The cumulative formation constant of the resulting NpHOPO complex (logβ 101 ) was determined by metal competition titration to be 42.0 ± 0.6, corroborating the extraordinarily high affinity of HOPO to tetravalent metal ions. Here, the prowess of valence control by HOPO and the high stability of the formed complex resulted in enhanced separations of Np from U and of Pu from U, with a maximum separation factor of ~7000 for both, nearly 90- and 10300-fold higher, respectively, than the values obtained using conventional PUREX formulae.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗