Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Radiometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Visual and radiometric photometry of 1580 Betulia

Broadband visual and 10.6-micron photometry of 1580 Betulia was obtained during its close approach to earth in May 1976. The photometry was analyzed by using the 'radiometric method' to derive the radius (2.10 + or - 0.40 km) and albedo (0.108 + or - 0.012) of Betulia. Radar and polarimetric results indicate a radius greater than 3.0 km and a geometric albedo of about 0.05. To be compatible with these results, Betulia was also modeled as having a surface with the thermal characteristics of bare rock rather than those of the 'lunar' regolith model used for previous analysis of radiometry of other asteroids. A 3.7-km radius and a geometric albedo of about 0.04 are compatible with all available observations. Betulia is the first Mars-crossing asteroid found to have such a low albedo, which may be indicative of carbonaceous surface material.

Lebofsky, L. A.↗

Improvement of scanning radiometer performance by digital reference averaging

Most radiometers utilize a calibration technique in which measurements of a known reference are subtracted from measurements of an unknown source so that common-mode bias errors are cancelled. When a radiometer is scanned over a varying scene, it produces a sequence of outputs, each being proportional to the difference between the reference and the corresponding input. A reference averaging technique is presented that employs a simple digital algorithm which exploits the asymmetry between the time-variable scene inputs and the nominally constant reference input by averaging many reference measurements to decrease the statistical uncertainty in the reference value. This algorithm is, therefore, optimized by an asymmetric chopping sequence in which the scene is viewed for more than one-half of the duty cycle (unlike the analog Dicke technique). Reference averaging algorithms are well within the capabilities of small microprocessors. Although this paper develops the technique for microwave radiometry, it may be beneficial for any system which measures a large number of unknowns relative to a known reference in the presence of slowly varying common-mode errors.

Bremer, J. C.↗

Electrostatically formed antennas

The electrostatically controlled membrane mirror (ECMM) is a way to achieve large, very light reflectors for radar, radio astronomy, radiometry, and optical devices. The concept is that of using electrostatic forces to tension a thin conducting membrane and to maintain it in a precision antenna shape. The ECMM is an adaptive structure which maintains surface quality despite errors in construction, irregularities of materials, solar heating, and onboard disturbances. The combination of high gain and low mass makes the ECMM ideally suited for space applications.

Mihora, D. J.↗

Infrared observations of the Jovian system from Voyager 1

The infrared spectroscopy and radiometry investigation has obtained spectra of Jupiter and its satellites between approximately 180 and 2500 kayser with a spectral resolution of 4.3 kayser. The Jupiter spectra show clear evidence of H2, CH4, C2H2, C2H6, CH3D, NH3, PH3, H2O, and GeH4. A helium concentration of 0.11 plus or minus 0.03 by volume is obtained. Meridional temperature cross sections show considerable structure. At high latitudes, the stratosphere is warmer in the north than in the south. The upper troposphere and lower stratosphere are locally cold over the Great Red Spot. Amalthea is warmer than expected. Considerable thermal structure is observed on Io, including a relatively hot region in the vicinity of a volcanic feature.

Hanel, R.↗

The use of microwave approaches in hydrology

Passive (radiometry) and active (radar) microwave approaches and their application to the study of the earth's hydrologic problem are examined and parameters including soil moisture content, snowpack properties, surface water area and the detection of precipitation overland are studied. Results show that these methods are capable of monitoring the moisture content in the surface layer of the soil in 5 cm thickness, detecting the presence of liquid water in snow and observing oil slicks. In addition, the methods make it possible to determine the water equivalent of snow packs and to delineate areas of rainfall over land.

Schmugge, T. J.↗

A passive microwave technique for profiling of atmospheric water vapor

There is considerable interest in remote measurements of the vertical distribution of water vapor, particularly under cloud conditions. The net integrated amount of water vapor has been measured using the 22.235-GHz water vapor line (Staelin et al., 1975). Attempts to use this line for obtaining vertical distribution information have not been fruitful because of the weakness of absorption even at line center. The 183.310-GHz line is much stronger and thus provides a possibility of profiling water vapor. The paper presents a preliminary analysis of this possibility. A technique is described for retrieval of water vapor profiles from microwave radiometric measurements near the 183-GHz water vapor line, and weighting functions useful in the retrievals are developed. The results suggest that microwave radiometry near the 183-GHz water vapor line could yield interesting water vapor profiles, at least over oceans.

Schaerer, G.↗

New space initiatives through large generic structures

New possibilities in satellite communications, surveillance, and orbital experimentation provided by the capability to construct and deploy Large Space Structures (LSS) are presented. The advent of the Shuttle will allow deployment of larger antennas with much larger gain sizes, noting new applications in communications, radiometry, and radar in frequencies from 0.24 to 14 GHz. Applications in multi-beam communication which can hold spot sizes on the ground down to 30 miles in diameter, new applications of the large aperture radar antenna, and estimates of soil moisture by the microwave radiometer are discussed. The Solar Power Satellite consisting of a large solar collector orbiting the earth at geosynchronous altitude over the equator which requires ability to construct LSS in space is described, noting the design of solar cells and materials of construction, including graphite composites and aluminum alloys. Space construction procedures and equipment are considered, noting that the most likely procedure would deliver the subsystems to orbit separately, and then construct the spacecraft on-orbit and assemble the satellite.

Johnson, R. W.↗

Possible methods for distinguishing icebergs from ships by aerial remote sensing

The simplest methods for aerial remote sensing which are least affected by atmospheric opacities are summarized. Radar is preferred for targets off the flight path, and microwave radiometry for targets along the flight path. Radar methods are classified by ability to resolve targets. Techniques which do not require target resolution are preferred. Among these techniques, polarization methods appear most promising, specifically those which differentiate the expected relatively greater depolarization by icebergs from that by ships or which detect doubly-reversed circular polarization.

Howes, W. L.↗

FY-79 - LSST antenna technology development

The development of technology needed to design, fabricate, transport, and deploy large antenna systems is reported. Accomplishments include: (1) development of scenarios for near term missions in communications, microwave radiometry, and radio astronomy; (2) conceptual designs for critical components of a hoop/column reflector; (3) development of a surface accuracy measurement system; and (4) development of electromagnetic analysis methods for large aperture antennas.

Campbell, T. G.↗

Mechanisms of UK radiometers flown on Nimbus 5 and 6 with particular reference to bearings, pivots and lubrication

The mechanisms incorporated in the vertical sounding infrared radiometry experiments which were launched on Nimbus 5 in 1972 and on Nimbus 6 in 1975 are discussed. Both use dry lubricants. The Nimbus 5 radiometer includes a rotating chopper driven via a carbon fiber-acetal resin gearwheel. The driving motor runs at 2000 rpm and has completed over 7 x 10 to the 9th power revolutions. Four gear driven filter wheels powered by stepper motors have each completed 2 x 10 to the 8th power changes. The input calibration mirror mechanism and its field of view compensation mechanisms are also described. All 25 ball races used in the experiment are of the film transfer type. The Nimbus 6 radiometer includes two cells. Each contains a piston supported on diaphragm springs and driven electromagnetically. The pistons are 6 cm in diameter with a stroke of 1 cm and are driven at their mechanical resonant frequency of approx. 15 Hz. The calibrating mirrors rotate periodically to view a target. The support pivots are synthetic sapphire ring stones with separate end thrust stones. The problems of mounting these stones to withstand vibration loads is described.

Hadley, H.↗

Infrared observations of the Jovian system from Voyager 2

As on Voyager 1, the infrared spectroscopy and radiometry instrument on Voyager 2 returned a large number of spectral and radiometric data on Jupiter and its satellites for varying conditions of latitude, longitude, local time, and phase and emission angles. The Voyager 2 average spectrum is slightly noisier than that from Voyager 1. The paper presents selected examples of results from the Voyager 2 infrared investigation, with particular reference to latitudinal variation of the abundance ratio of ethane to acetylene, atmospheric thermal structure, Jupiter's ring, and satellites.

Hanel, R.↗

Solar cell spectral response characterization

The absolute spectral response of solar cells is reported in the 400-1000-nm spectral region. Measurements were performed using two different types of monochromatic sources: amplitude-stabilized CW laser lines and interference filters with an incandescent lamp. Both types of calibration procedures use electrical substitution radiometry as the basis of traceability to absolute SI units. The accuracy of the calibration is shown to be limited by the nonideal characteristics of the solar cells themselves, specifically spatial nonuniformities and nonlinearities induced by high light levels.

Zalewski, E. F.↗

Radio observations of asteroids - Results and prospects

Radio observations of the asteroids can provide information on the thermal and dielectric properties of the surface materials and, because the radio emission arises somewhat below the surface, the data give some indication of layering. Observational difficulty has limited the investigations to only 6 asteroids. 1 Ceres and 324 Bamberga appear to have a layer of dust covering a more compacted material; the data on 4 Vesta cannot be matched by any current models for the surface; and the results for 18 Melpomene, 31 Euphrosyne and 433 Eros are too incomplete for firm conclusions. Future possibilities include more accurate radiometry of a few selected asteroids of different taxonomic classes and actual resolution of some of the larger objects by aperture synthesis techniques.

Dickel, J. R.↗

Microwave approaches in hydrology

The microwave approaches for remote sensing of soil moisture centent, snowpack properties, surface water area, and the detection of precipitation over land are discussed. Both active (radar) and passive (radiometry) approaches are considered, and the advantages of microwave sensing are pointed out, including all-weather capability, especially at the longer wavelengths, and greater penetration depth with optical or infrared sensors. Results obtained from ground-based, aircraft, and spacecraft platforms show that microwave systems can monitor the moisture content in the surface soil layer (5 cm thick), and that passive microwave systems can discriminate between light and heavy snowcover, detect the presence of liquid water in the snow, and qualitatively estimate snow water equivalent.

Schmugge, T. J.↗

Radar estimation of slant path rain attenuation at frequencies above 10 GHz and comparisons with measured multi-season results

Techniques and results pertaining to estimating Earth satellite path rain attenuation events and statistics using radar at nonattenuating wavelengths are presented. The radar formulation and beam scanning methods are described and the procedure for relating the radar measured Rayleigh reflectivity to the high frequency Mie attenuation coefficient are given. Examples of radar derived single terminal statistics and estimation criteria as they relate to path angle and frequency are reviewed. Radar derived space diversity statistics and their dependence on terminal spacing and frequency are described. Site diversity performance curves obtained by radar and radiometry are compared with each other demonstrating the utility of radar methods. Results of a multi-year experiment to test, refine, and establish accuracies of radar methods for arriving at estimates of rain attenuation along an Earth-satellite path are discussed. Comparisons of measured and radar estimated fade events are presented and found to be good. Comparisons of cumulative fade distributions show agreement to be excellent giving an rms deviation of 1 dB.

Goldhirsh, J.↗

Side-looking airborne radar image interpretation and geological mapping: Problems and results

Geological experiments and surveys conducted by BRGM and GDTA members to evaluate interest in SLAR image interpretation are summarized. Two surveys were selected for presentation: Les Vans (Massif central, France) and Guyana (South America). They have permitted a comparison between different types of SLAR: Goodyear, Motorola, JPL, and Vigie in term of lithological and structural applications. On the Les Vans test site conclusions reached concern radiometry, which is better on L-band imagery, polarization, HV being more useful than HH for geological mapping in an L-band system, wavelength and illuminations. Over Guyana, the use of Goodyear X-band SLAR enables satisfactory geological and structural mapping under heavy equatorial forest with cloud cover conditions. A differential program was developed for fracture filtering and image enhancement with a coherent light laser, and significant results were obtained.

Scanvic, J. Y.↗

Ceramic and coating applications in the hostile environment of a high temperature hypersonic wind tunnel

A Mach 7, blowdown wind tunnel was used to investigate aerothermal structural phenomena on large to full scale high speed vehicle components. The high energy test medium, which provided a true temperature simulation of hypersonic flow at 24 to 40 km altitude, was generated by the combustion of methane with air at high pressures. Since the wind tunnel, as well as the models, must be protected from thermally induced damage, ceramics and coatings were used extensively. Coatings were used both to protect various wind tunnel components and to improve the quality of the test stream. Planned modifications for the wind tunnel included more extensive use of ceramics in order to minimize the number of active cooling systems and thus minimize the inherent operational unreliability and cost that accompanies such systems. Use of nonintrusive data acquisition techniques, such as infrared radiometry, allowed more widespread use of ceramics for models to be tested in high energy wind tunnels.

Puster, R. L.↗

Development of the maypole (hoop/column) deployable reflector concept for large space systems application

A review of the NASA supplied mission scenarios for the communications, radiometry and radio astronomy missions. Led to specific hoop/column antenna configurations for each mission. The mission configurations were then evaluated to identify specific technology items requiring further development. The compilation of these technology drivers resulted in a specification of an artificial or point design, the design element around which all design and performance estimates for the rest of the program were made. Mechanisms for deployment and stowing are examined including the cable driven mast and the latch pulley roller. Methods for determining the thermal expansion of candidate materials, the development of the cables, cords, and hinged joints, and surface adjustment are considered.

Montgomery, D. C.↗