Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ROUGHNESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Scattering of electromagnetic waves from a periodic surface with random roughness

Equations for the scattering of electromagnetic waves from a randomly perturbed periodic surface have been formulated using the extended boundary condition method and solved using the small perturbation method. Surface currents and scattered fields are solved for up to the second order. The results indicate that as the correlation length of the random roughness increases, the bistatic scattering patterns of the scattered fields show several beams associated with each Bragg diffraction direction of the periodic surface. The beam shape becomes broader with smaller correlation length. Results obtained using the Kirchhoff approximation are found to agree well with the present results for the hh and vv polarized backscattering coefficients for small angles of incidence.

Yueh, H. A.↗

Effects of oxidation and roughness on Cu contact resistance from 4 to 290 K

Knowledge of the factors influencing contact resistance is important for optimizing system design in cryogenic applications. In space cryogenics, indirect cooling of infrared components is the primary concern. The presence of bolted joints results in contact resistances which can dominate all other contributions to the overall heat transfer rate. Here, thermal and electrical contact resistances measured between 4 K and 290 K for a series of bolted OFHC Cu contacts are reported. Surface roughness is found to have little effect on the overall contact resistance within the experimental limits, while oxidation can increase the contact resistance by as much as a factor of 100. Thermal and electrical contact resistances measured on the same contact show that the contact resistance temperature dependence does not follow the bulk dependence. For example, the residual resistance ratio (RRR) of the OFHC Cu is 110, but for contacts made from this material, the RRR is about two.

Nilles, M. J.↗

Measuring Thermal Conductivities Of Rough Specimens

Thermal conductivity of irregularly surfaced specimen measured more accurately and reliably by use of heat-transfer adhesive establishing contact between specimen and reference standards. Method useful when specimen made up of fragments of material. Adhesive ensures good thermal contact to pieces not matching others in height. In rough-surfaced or unequally sized specimens, heat-flow pattern becomes distorted, and temperatures at measurement points do not accurately represent those throughout reference standards and specimen. Filling voids with conductive adhesive restores nearly uniform distribution heat flow.

Striepens, Aloys H.↗

Electromagnetic wave scattering at near-grazing incidence from a gently undulating, rough surface

Models to estimate the reflection coefficient of a statistically rough surface, for example the works of Beckmann, Smith, and Vesecky are discussed. Bistatic radar experiments carried out during the Apollo 16 mission provide a data set with which to compare theoretical models and experimental data. These bistatic S-band radar experiments provide experimental estimates of the Moon's bistatic, forward scatter, reflection coefficient for grazing angles of 2.5 to 78 deg. Theoretical expressions for the reflection coefficient are developed for comparison with these experimental data. At grazing angles below 10 deg the models of Smith and Vesecky compare favorably with the data. Beckmann's model falls significantly more rapidly with decreasing grazing angle than does the data.

Vesecky, J. F.↗

Observations of the properties of the water surface roughness structure under the action of wind and waves

The statistical properties of a water surface roughness structure subjected to wind and waves are analyzed in a laboratory wind wave channel. The surface slope is derived using elevation measurements and the pitot tube is employed to measure wind speed. The transient responses of the surface slope to a calm condition and low, medium, and high wind conditions are studied. Two methods for determining a critical wind speed range are described.

Long, Steven R.↗

On the ability of rough surface scattering approximations to predict hydrodynamic modulation of the ocean radar cross section - A numerical study

Scattering from the ocean surface at microwave frequencies is often described by the Bragg scattering model or the two-scale model. Here, the ability of these models to predict cross section modulation is investigated by comparing Bragg and two-scale cross-sections with cross sections calculated by a numerical electromagnetic approach. The numerical method is used as the standard of comparison. For slightly rough surfaces, the Bragg model is found to be very accurate, but for much rougher surfaces, the two-scale model is superior and should be used for calculating both the absolute cross section and the change in cross section due to spatial or temporal modulation of the ocean wave height spectrum. These results are relevant to the interpretation of SAR images of ocean surface phenomena which perturb the wave height spectrum at ripple wavelengths.

Durden, Stephen L.↗

The effects of Reynolds number, rotor incidence angle, and surface roughness on the heat transfer distribution in a large-scale turbine rotor passage

A combined experimental and computational program was conducted to examine the heat transfer distribution in a turbine rotor passage geometrically similiar to the Space Shuttle Main Engine (SSME) High Pressure Fuel Turbopump (HPFTP). Heat transfer was measured and computed for both the full-span suction and pressure surfaces of the rotor airfoil as well as for the hub endwall surface. The primary objective of the program was to provide a benchmark-quality data base for the assessment of rotor passage heat transfer computational procedures. The experimental portion of the study was conducted in a large-scale, ambient temperature, rotating turbine model. Heat transfer data were obtained using thermocouple and liquid-crystal techniques to measure temperature distributions on the thin, electrically-heated skin of the rotor passage model. Test data were obtained for various combinations of Reynolds number, rotor incidence angle and model surface roughness. The data are reported in the form of contour maps of Stanton number. These heat distribution maps revealed numerous local effects produced by the three-dimensional flows within the rotor passage. Of particular importance were regions of local enhancement produced on the airfoil suction surface by the main-passage and tip-leakage vortices and on the hub endwall by the leading-edge horseshoe vortex system. The computational portion consisted of the application of a well-posed parabolized Navier-Stokes analysis to the calculation of the three-dimensional viscous flow through ducts simulating the a gas turbine passage. These cases include a 90 deg turning duct, a gas turbine cascade simulating a stator passage, and a gas turbine rotor passage including Coriolis forces. The calculated results were evaluated using experimental data of the three-dimensional velocity fields, wall static pressures, and wall heat transfer on the suction surface of the turbine airfoil and on the end wall. Particular attention was paid to an accurate modeling of the passage vortex and to the development of the wall boundary layers including crossflow.

Blair, Michael F.↗

Synthetic-aperture-radar imaging of the ocean surface using the slightly-rough facet model and a full surface-wave spectrum

A new model of synthetic-aperture-radar (SAR) imaging of ocean waves is described. The model is based on mapping individual, slightly-rough surface facets through the SAR processor into the image and responses of the facets in the image domain are added together coherently to give the composite image. A windowing technique allows both the orbital motion and the phase velocity of the long waves to be included. It is determined that the azimuthal cut-off is due to a smearing of the response of the facets in the image induced by the random orbital motion of the intermediate large-scale waves and that the focus adjustment that gives the greatest image contrast is half the phase velocity of the dominant long wave. The optimal processing technique, however, may consist of spatially offsetting the multiple looks on the image domain to compensate the propagation of long waves during the integration time of the SAR.

West, James C.↗

Rough surface scattering results based on bandpass autocorrelation forms

Surface-height autocorrelation forms such as Gaussian and exponential are often used in studies of near-normal incidence rough-surface scattering. Such models require the existence of a constant, or DC, value in the spectrum. The consequences of autocorrelation forms that correspond to spectral processes that are essentially bandpass in nature are examined. One such process is that of ocean wind waves. In this case, the spectral components do not extend down to zero frequency. The physical optics backscatter theory is reexamined relative to such autocorrelation functions. Experimental results obtained from a wavetank are compared to the autocorrelation model used in the analysis. The analysis indicates that Gaussian correlation length or mean-square slope is not an appropriate parameter for narrowband conditions and that significant slope is a more relevant parameter. Inherent in the deep-phase assumption is some form of slope dependency. The analysis given (and variants thereof) can be used to provide insight into the physical effects of separate spectral components and of spectral directionality.

Miller, Lee S.↗

The photometric roughness of Ariel is not unusual

Voyager 2 images of the Uranian satellite Ariel are reanalyzed, with a focus on the large-scale roughness parameter theta-bar. The techniques used to reduce the data and fit the Hapke parameters are described, and the results are presented in tables and graphs. Using the whole-disk phase curve, theta-bar of 27 + or - 1 deg is obtained, somewhat higher than but in good general agreement with the values for the other Uranian satellites. The anomalously high value (42 deg) found by Helfenstein et al. (1988) is attributed to miscalibration of the clear-filter image for phase angle 144.7 deg.

Skypeck, A.↗

The photometric roughness of Mimas

Voyager imaging observations of Mimas lie between 6 degrees and 132 degrees in phase angle and provide sufficient data with which to model such surface characteristics as large-scale roughness and directional scattering properties. Multiple scattering dominates the photometric behavior of the bright icy surface of Mimas, which has been shown to be moderately backscattering. Researchers analyzed disk-integrated and disk-resolved Voyager clear filter photometric using a modified version of Hapke's (1986) equation which accommodates anisotropic multiple scattering.

Verbiscer, A.↗

Measuring uncertainty by extracting fuzzy rules using rough sets

Despite the advancements in the computer industry in the past 30 years, there is still one major deficiency. Computers are not designed to handle terms where uncertainty is present. To deal with uncertainty, techniques other than classical logic must be developed. The methods are examined of statistical analysis, the Dempster-Shafer theory, rough set theory, and fuzzy set theory to solve this problem. The fundamentals of these theories are combined to possibly provide the optimal solution. By incorporating principles from these theories, a decision making process may be simulated by extracting two sets of fuzzy rules: certain rules and possible rules. From these rules a corresponding measure of how much these rules is believed is constructed. From this, the idea of how much a fuzzy diagnosis is definable in terms of a set of fuzzy attributes is studied.

Worm, Jeffrey A.↗

The effect of surface roughness on Triton's volatile distribution

Calculations of radiative equilibrium temperatures on Triton's rough surface suggest that significant condensation of N2 may be occurring in the northern equatorial regions, despite their relatively dark appearance. The bright frost is not apparent in the Voyager images because it tends to be concentrated in relatively unilluminated facets of the surface. This patchwork of bright frost-covered regions and darker bare ground may be distributed on scales smaller than that of the Voyager resolution; as a result the northern equatorial regions may appear relatively dark. This hypothesis also accounts for the observed wind direction in the Southern Hemisphere because it implies that the equatorial regions are warmer than the south polar regions.

Yelle, Roger V.↗

Estimates of surface roughness derived from synthetic aperture radar (SAR) data

Radar remote sensing data provide a unique perspective of the earth's crust and the processes that have influenced its evolution. Physically based models are required, however, to relate the geophysical quantities being measured by the radar sensor to useful geologic information. In this study, synthetic aperture radar (SAR) data over the Cima volcanic field in the Mojave Desert of California are quantitatively connected with microtopography through inversion of a radar backscatter model. Changes in surface roughness inferred from the derived microtopography are modeled and found to be consistent with aeolian mantling as surfaces age. Estimated rates of aeolian deposition for the Cima area are compared to the Lunar Crater volcanic field in Nevada. Rates of deposition appear to be higher at Cima volcanic field, most likely because of its proximity to Soda Lake, the main source of the aeolian material.

Evans, Diane L.↗

A numerical assessment of rough surface scattering theories. I - Horizontal polarization. II - Vertical polarization

A numerical evaluation is presented of the regime of validity for various rough surface scattering theories against numerical results obtained by employing the method of moments. The contribution of each theory is considered up to second order in the perturbation expansion for the surface current. Considering both vertical and horizontal polarizations, the unified perturbation method provides best results among all theories weighed.

Rodriguez, Ernesto↗

Certain and possible rules for decision making using rough set theory extended to fuzzy sets

Uncertainty may be caused by the ambiguity in the terms used to describe a specific situation. It may also be caused by skepticism of rules used to describe a course of action or by missing and/or erroneous data. To deal with uncertainty, techniques other than classical logic need to be developed. Although, statistics may be the best tool available for handling likelihood, it is not always adequate for dealing with knowledge acquisition under uncertainty. Inadequacies caused by estimating probabilities in statistical processes can be alleviated through use of the Dempster-Shafer theory of evidence. Fuzzy set theory is another tool used to deal with uncertainty where ambiguous terms are present. Other methods include rough sets, the theory of endorsements and nonmonotonic logic. J. Grzymala-Busse has defined the concept of lower and upper approximation of a (crisp) set and has used that concept to extract rules from a set of examples. We will define the fuzzy analogs of lower and upper approximations and use these to obtain certain and possible rules from a set of examples where the data is fuzzy. Central to these concepts will be the idea of the degree to which a fuzzy set A is contained in another fuzzy set B, and the degree of intersection of a set A with set B. These concepts will also give meaning to the statement; A implies B. The two meanings will be: (1) if x is certainly in A then it is certainly in B, and (2) if x is possibly in A then it is possibly in B. Next, classification will be looked at and it will be shown that if a classification will be looked at and it will be shown that if a classification is well externally definable then it is well internally definable, and if it is poorly externally definable then it is poorly internally definable, thus generalizing a result of Grzymala-Busse. Finally, some ideas of how to define consensus and group options to form clusters of rules will be given.

Dekorvin, Andre↗

Mimas - Photometric roughness and albedo map

The backscattering phase function asssociated with bright icy satellites may render Hapke's (1986) isotropic approximation to multiple scattering inadequate. A reanalysis is accordingly conducted here of the Voyager observations of Mimas, using a modification to Hapke's equation that accommodates anisotropic multiple scattering, in order to characterize the physical and photometric properties of the heavily cratered icy surface. The roughness parameter of Mimas is in this way redefined, and an accurate albedo map is obtained which deminstrates small latitudinal and longitudinal albedo variations.

Verbiscer, Anne J.↗

Investigation of rotor blade roughness effects on turbine performance

The cold air test program was completed on the SSME (Space Shuttle Main Engine) HPFTP (High Pressure Fuel Turbopump) turbine with production nozzle vane rings and polished coated rotor blades with a smooth surface finish of 30 microinch (0.76 micrometer) RMS (Root Mean Square). The smooth blades were polished by an abrasive flow machining process. The test results were compared with the air test results from production rough coated rotor blades with a surface finish of up to 400 microinch (10.16 micrometer) RMS. Turbine efficiency was higher for the smooth blades over the entire range tested. Efficiency increased 2.1 percentage points at the SSME 104 percent RPL (Rated Power Level) condition. This efficiency improvement could reduce the SSME HPFTP turbine inlet temperature by 57 degrees Rankine (32 degrees Kelvin) increasing turbine durability. The turbine flow parameter increased and the mid-span outlet swirl angle became more axial with the smooth rotor blades.

Boynton, J. L.↗