Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RISE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Acceleration of U.S. Southeast and Gulf coast sea-level rise amplified by internal climate variability

While there is evidence for an acceleration in global mean sea level (MSL) since the 1960s, its detection at local levels has been hampered by the considerable influence of natural variability on the rate of MSL change. Here we report a MSL acceleration in tide gauge records along the U.S. Southeast and Gulf coasts that has led to rates (>10 mm yr -1 since 2010) that are unprecedented in at least 120 years. We show that this acceleration is primarily induced by an ocean dynamic signal exceeding the externally forced response from historical climate model simulations. However, when the simulated forced response is removed from observations, the residuals are neither historically unprecedented nor inconsistent with internal variability in simulations. A large fraction of the residuals is consistent with wind driven Rossby waves in the tropical North Atlantic. This indicates that this ongoing acceleration represents the compounding effects of external forcing and internal climate variability.

54 ENVIRONMENTAL SCIENCES↗

The rise of high-entropy battery materials

The emergence of high-entropy materials has inspired the exploration of novel materials in diverse technologies. In electrochemical energy storage, high-entropy design has shown advantageous impacts on battery materials such as suppressing undesired short-range order, frustrating energy landscape, decreasing volumetric change and reducing the reliance on critical metals. This comment addresses the definition and potential improper use of the term “high entropy” in the context of battery materials design, highlights the unique properties of high-entropy materials in battery applications, and outlines the remaining challenges in the synthesis, characterization, and computational modeling of high-entropy battery materials.

25 ENERGY STORAGE↗

Rising atmospheric moisture escalates the future impact of atmospheric rivers in the Antarctic climate system

Abstract Despite their relative rarity, atmospheric rivers are key contributors to the surface mass balance of Antarctica. However, the future role of atmospheric rivers in modulating Antarctic sea-level contributions is a major area of uncertainty. Here, we leverage high-resolution climate simulations to show that Antarctic atmospheric rivers are highly sensitive to future increases in atmospheric moisture, leading to a doubling of atmospheric river frequencies and 2.5 × increase in precipitation from 2066–2100 under present-day thresholds for atmospheric river detection. However, future precipitation impacts are critically dependent on the detection threshold: accounting for moisture increases in the threshold produces smaller, regional changes in atmospheric river frequency, primarily resulting from an eastward shift in the polar jet maximum wind speeds. Our results underscore the importance of using large ensembles to quantify Antarctic atmospheric river responses to variability in projected moisture, which may not be captured when using only a few ensemble members.

Environmental Sciences & Ecology↗

Tensile strains give rise to strong size effects for thermal conductivities of silicene, germanene and stanene

Based on first principles calculations and self-consistent solution of linearized Boltzmann-Peierls equation for phonon transport approach within a three-phonon scattering framework, we characterize lattice thermal conductivities k of freestanding silicene, germanene and stanene under different isotropic tensile strains and temperatures. In this work, we find a strong size dependence of k for silicene with tensile strain, i.e., divergent k with increasing system size, in contrast, the intrinsic room temperature k for unstrained silicene converges with system size to 19.34 W/m –1 K –1 by 178 nm. The room temperature k of strained silicene becomes as large as that of bulk silicon by 84 m, indicating the possibility of using strain in silicene to manipulate k for thermal management. The relative contribution to the intrinsic k from out-of-plane acoustic modes is largest for unstrained silicene, –39% at room temperature. The single mode relaxation time approximation, which works reasonably well for bulk silicon, fails to appropriately describe phonon thermal transport in silicene, germanene and stanene within the temperature range considered. For large samples of silicene, k increases with tensile strain, peaks at –7% strain and then decreases with further strain. In germanene and stanene increasing strain hardens and stabilizes long wavelength out-of-plane acoustic phonons, and leads to similar k behaviors to those of silicene. As a result, these findings further our understanding of phonon dynamics in group-IV buckled monolayers and may guide transfer and fabrication techniques of these freestanding samples and engineering k by size and strain for applications of thermal management and thermoelectricity.

36 MATERIALS SCIENCE↗

Layered structures of assembled imine-linked macrocycles and two-dimensional covalent organic frameworks give rise to prolonged exciton lifetimes

Ordered organic materials and assemblies have great potential to be tailored to have desirable properties for optoelectronic applications, such as long exciton lifetime and high directional exciton mobility. Framework materials, such as two-dimensional covalent organic frameworks (2D COFs), as well as their truncated macrocyclic analogues, are versatile platforms to organize functional aromatic systems into designed assemblies and robust materials. In this study we investigate the exciton dynamics in a 2D COF, its corresponding hexagonal macrocycle, and extended nanotubes comprised of stacked macrocycles. The excitonic behavior of these three systems provide an understanding of excitonic processes that occur in the plane of the covalently bonded 2D macromolecules and between layers of the nanotubes and 2D COF. The nanotube and analogous 2D COF exhibit longer excited-state lifetimes (~100 ps) compared to the individual, solvated macrocycles (<0.5 ps). These differences are attributed to the internal conversion facilitated by the internal motions of the imine linkages which are significantly reduced in the assembled macrocycles in the nanotube and 2D COF sheets in the layered structures. The exciton diffusion processes in the assembled nanotubes and 2D COF systems were characterized by the autocorrelations of the transition dipole moment of the excitons, giving the depolarization time constants for both systems to be ~1 ps. This work also reveals the anisotropic exciton dynamics related to the in-plane and inter-plane structural factors in these systems. These studies provide guidance for the design of future COF materials, where the longer excited state lifetimes imparted by assembly are beneficial for optoelectronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PTF11mnb: First analog of supernova 2005bf: Long-rising, double-peaked supernova Ic from a massive progenitor*

The aim is to study PTF11mnb, a He-poor supernova (SN) whose light curves resemble those of SN 2005bf, a peculiar double-peaked stripped-envelope (SE) SN, until the declining phase after the main peak. We investigate the mechanism powering its light curve and the nature of its progenitor star. Methods. Optical photometry and spectroscopy of PTF11mnb are presented. We compared light curves, colors and spectral properties to those of SN 2005bf and normal SE SNe. We built a bolometric light curve and modeled this light curve with the SuperNova Explosion Code (SNEC) hydrodynamical code explosion of a MESA progenitor star and semi-analytic models. Results. The light curve of PTF11mnb turns out to be similar to that of SN 2005bf until ~50 d when the main (secondary) peaks occur at -18.5 mag. The early peak occurs at ~20 d and is about 1.0 mag fainter. After the main peak, the decline rate of PTF11mnb is remarkably slower than what was observed in SN 2005bf, and it traces well the 56 Co decay rate. The spectra of PTF11mnb reveal a SN Ic and have no traces of He unlike in the case of SN Ib 2005bf, although they have velocities comparable to those of SN 2005bf. The whole evolution of the bolometric light curve is well reproduced by the explosion of a massive (M ej = 7.8 M ⊙ ), He-poor star characterized by a double-peaked 56 Ni distribution, a total 56 Ni mass of 0.59 M ⊙ , and an explosion energy of 2.2 × 10 51 erg. Alternatively, a normal SN Ib/c explosion (M( 56 Ni) = 0.11 M ⊙ , E K = 0.2 × 10 51 erg, M ej = 1 M ⊙ ) can power the first peak while a magnetar, with a magnetic field characterized by B = 5.0 × 10 14 G, and a rotation period of P = 18.1 ms, provides energy for the main peak. The early g-band light curve can be fit with a shock-breakout cooling tail or an extended envelope model from which a radius of at least 30 R ⊙ is obtained. Conclusions. We presented a scenario where PTF11mnb was the explosion of a massive, He-poor star, characterized by a double-peaked 56 Ni distribution. In this case, the ejecta mass and the absence of He imply a large ZAMS mass (~85 M ⊙ ) for the progenitor, which most likely was a Wolf-Rayet star, surrounded by an extended envelope formed either by a pre-SN eruption or due to a binary configuration. Alternatively, PTF11mnb could be powered by a SE SN with a less massive progenitor during the first peak and by a magnetar afterward.

79 ASTRONOMY AND ASTROPHYSICS↗

The influence of laser-induced nanosecond rise-time stress waves on the microstructure and surface chemical activity of single crystal Cu nanopillars

An apparatus and test procedure for fabrication and loading of single crystal metal nanopillars under extremely high pressures (>1 GPa) and strain rates (>10{sup 7} s{sup -1}), using laser-generated stress waves, are presented. Single-crystalline Cu pillars ({approx}1.20 {mu}m in tall and {approx}0.45 {mu}m in diameter) prepared via focused ion beam milling of Cu(001) substrates are shock-loaded using this approach with the dilatational stress waves propagating along the [001] axis of the pillars. Transmission electron microscopy observations of shock-loaded pillars show that dislocation density decreases and that their orientation changes with increasing stress wave amplitude, indicative of dislocation motion. The shock-loaded pillars exhibit enhanced chemical reactivity when submerged in oil and isopropyl alcohol solutions, due likely to the exposure of clean surfaces via surface spallation and formation of surface steps and nanoscale facets through dislocation motion to the surface of the pillars, resulting in growth of thin oxide films on the surfaces of the pillars.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

X-pinch X-ray emission on a portable low-current, fast rise-time generator

In this paper, we report on experiments exploring X-ray emission from an X-pinch driven by a small Marx-waterline generator supplying 50 kA with a risetime of 50 ns and a peak voltage of ~250 kV. Both standard crossed wire loads and hybrid loads utilizing conical metal electrodes with a single short wire in between them were studied, and in both cases reliable modes of operation were obtained for X-ray radiography. Soft (few keV) and Hard (>5 keV) X-ray emission characteristics were observed. With standard X-pinches, soft radiation emanated from a small hot spot about 3 μm in size, along with hard radiation from a ~200 μm region close to this hot spot. With hybrid X-pinches, the hot spot was <7 μm in size. Finally, there was a clear correlation between the soft and hard X-ray emission—pinches that produced intense soft X-ray emission from a small hot spot also produced the most intense, localized hard X-ray emission.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The rise and fall of stretched bond errors: Extending the analysis of Perdew–Zunger self-interaction corrections of reaction barrier heights beyond the LSDA

Incorporating self-interaction corrections (SIC) significantly improves chemical reaction barrier height predictions made using density functional theory methods. We present a detailed orbital-by-orbital analysis of these corrections for three semi-local density functional approximations (DFAs) situated on the three lowest rungs of Jacob’s ladder of approximations. The analysis is based on Fermi–Löwdin Orbital Self-Interaction Correction (FLOSIC) calculations performed at several steps along the reaction pathway from the reactants (R) to the transition state (TS) to the products (P) for four representative reactions selected from the BH76 benchmark set. For all three functionals, the major contribution to self-interaction corrections of the barrier heights can be traced to stretched bond orbitals that develop near the TS configuration. The magnitude of the ratio of the self-exchange–correlation energy to the self-Hartree energy (XC/H) for a given orbital is introduced as an indicator of one-electron self-interaction error. XC/H = 1.0 implies that an orbital’s self-exchange–correlation energy exactly cancels its self-Hartree energy and that the orbital, therefore, makes no contribution to the SIC in the FLOSIC scheme. For the practical DFAs studied here, XC/H spans a range of values. Here, the largest values are obtained for stretched or strongly lobed orbitals. We show that significant differences in XC/H for corresponding orbitals in the R, TS, and P configurations can be used to identify the major contributors to the SIC of barrier heights and reaction energies. Based on such comparisons, we suggest that barrier height predictions made using the strongly constrained and appropriately normed meta-generalized gradient approximation may have attained the best accuracy possible for a semi-local functional using the Perdew–Zunger SIC approach.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spontaneous driving forces give rise to protein-RNA condensates with coexisting phases and complex material properties

Phase separation of multivalent protein and RNA molecules underlies the biogenesis of biomolecular condensates such as membraneless organelles. In vivo, these condensates encompass hundreds of distinct types of molecules that typically organize into multilayered structures supporting the differential partitioning of molecules into distinct regions with distinct material properties. The interplay between driven (active) versus spontaneous (passive) processes that are required for enabling the formation of condensates with coexisting layers of distinct material properties remains unclear. Here, we deploy systematic experiments and simulations based on coarse-grained models to show that the collective interactions among the simplest, biologically relevant proteins and archetypal RNA molecules are sufficient for driving the spontaneous emergence of multilayered condensates with distinct material properties. These studies yield a set of rules regarding homotypic and heterotypic interactions that are likely to be relevant for understanding the interplay between active and passive processes that control the formation of functional biomolecular condensates.

59 BASIC BIOLOGICAL SCIENCES↗

Urbanization and edge effects interact to drive mutualism breakdown and the rise of unstable pathogenic communities in forest soil

Temperate forests are threatened by urbanization and fragmentation, with over 20% (118,300 km 2 ) of U.S. forest land projected to be subsumed by urban land development. We leveraged a unique, well-characterized urban-to-rural and forest edge-to-interior gradient to identify the combined impact of these two land use changes—urbanization and forest edge creation—on the soil microbial community in native remnant forests. We found evidence of mutualism breakdown between trees and their fungal root mutualists [ectomycorrhizal (ECM) fungi] with urbanization, where ECM fungi colonized fewer tree roots and had less connectivity in soil microbiome networks in urban forests compared to rural forests. However, urbanization did not reduce the relative abundance of ECM fungi in forest soils; instead, forest edges alone led to strong reductions in ECM fungal abundance. At forest edges, ECM fungi were replaced by plant and animal pathogens, as well as copiotrophic, xenobiotic-degrading, and nitrogen-cycling bacteria, including nitrifiers and denitrifiers. Urbanization and forest edges interacted to generate new “suites” of microbes, with urban interior forests harboring highly homogenized microbiomes, while edge forest microbiomes were more heterogeneous and less stable, showing increased vulnerability to low soil moisture. When scaled to the regional level, we found that forest soils are projected to harbor high abundances of fungal pathogens and denitrifying bacteria, even in rural areas, due to the widespread existence of forest edges. Our results highlight the potential for soil microbiome dysfunction—including increased greenhouse gas production—in temperate forest regions that are subsumed by urban expansion, both now and in the future.

54 ENVIRONMENTAL SCIENCES↗

THE RISE OF THE AGB IN THE GALACTIC HALO: Mg ISOTOPIC RATIOS AND HIGH PRECISION ELEMENTAL ABUNDANCES IN M71 GIANTS

High-resolution (R{approx} 100,000), high signal-to-noise spectra of M71 giants have been obtained with High Resolution Echelle Spectrometer at the Keck I telescope in order to measure their Mg isotopic ratios, as well as elemental abundances of C, N, O, Na, Mg, Al, Si, Ca, Ti, Ni, Zr, and La. We demonstrate that M71 has two populations, the first having weak CN, normal O, Na, Mg, and Al, and a low ratio of {sup 26}Mg/Mg ({approx}4%) consistent with models of galactic chemical evolution with no contribution from asymptotic giant branch (AGB) stars. The Galactic halo could have been formed from the dissolution of globular clusters prior to their intermediate-mass stars reaching the AGB. The second population has enhanced Na and Al accompanied by lower O and by higher {sup 26}Mg/Mg ({approx}8%), consistent with models which do incorporate ejecta from AGB stars via normal stellar winds. All the M71 giants have identical [Fe/H], [Si/Fe], [Ca/Fe], [Ti/Fe], and [Ni/Fe] to within {sigma} = 0.04 dex (10%). We therefore infer that the timescale for formation of the first generation of stars we see today in this globular cluster must be sufficiently short to avoid a contribution from AGB stars, i.e., less than {approx}0.3 Gyr. Furthermore, the Mg isotopic ratios in the second M71 population, combined with their elemental abundances for the light elements, demonstrate that the difference must be the result of adding in the ejecta of intermediate-mass AGB stars. Finally, we suggest that the low amplitude of the abundance variations of the light elements within M71 is due to a combination of its low mass and its relatively high Fe-metallicity.

99 GENERAL AND MISCELLANEOUS↗

SLOW RISE AND PARTIAL ERUPTION OF A DOUBLE-DECKER FILAMENT. I. OBSERVATIONS AND INTERPRETATION

We study an active-region dextral filament that was composed of two branches separated in height by about 13 Mm, as inferred from three-dimensional reconstruction by combining SDO and STEREO-B observations. This 'double-decker' configuration sustained for days before the upper branch erupted with a GOES-class M1.0 flare on 2010 August 7. Analyzing this evolution, we obtain the following main results. (1) During the hours before the eruption, filament threads within the lower branch were observed to intermittently brighten up, lift upward, and then merge with the upper branch. The merging process contributed magnetic flux and current to the upper branch, resulting in its quasi-static ascent. (2) This transfer might serve as the key mechanism for the upper branch to lose equilibrium by reaching the limiting flux that can be stably held down by the overlying field or by reaching the threshold of the torus instability. (3) The erupting branch first straightened from a reverse S shape that followed the polarity inversion line and then writhed into a forward S shape. This shows a transfer of left-handed helicity in a sequence of writhe-twist-writhe. The fact that the initial writhe is converted into the twist of the flux rope excludes the helical kink instability as the trigger process of the eruption, but supports the occurrence of the instability in the main phase, which is indeed indicated by the very strong writhing motion. (4) A hard X-ray sigmoid, likely of coronal origin, formed in the gap between the two original filament branches in the impulsive phase of the associated flare. This supports a model of transient sigmoids forming in the vertical flare current sheet. (5) Left-handed magnetic helicity is inferred for both branches of the dextral filament. (6) Two types of force-free magnetic configurations are compatible with the data, a double flux rope equilibrium and a single flux rope situated above a loop arcade.

79 ASTRONOMY AND ASTROPHYSICS↗