Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RED SHIFT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Effect of annealing temperature and pH on morphology and optical property of highly dispersible ZnO nanoparticles

Highly dispersible zinc oxide nanoparticles were produced in large quantity via a simple solution method. The effect of temperature and pH impact on as-prepared ZnO nanoparticles with respect to the morphological and optical characteristics has been investigated. The average particle size of ZnO nanoparticles increased with increasing annealing temperature. A sharp UV band-edge emission was observed in as-prepared ZnO nanoparticles with negligibly less intense deep level emission. However, upon annealing at high temperature in air, UV band-edge emission disappears with an evolution of a broad deep level emission in photoluminescence spectra. Similarly, by adjusting the pH of reaction medium from 4 to pH = 8 using ammonium hydroxide solution, particle size gets bigger and bigger leads to red-shift in UV band-edge emission and an appearance of deep level emission peak. At pH = 8, well resolved sharp X-ray diffraction peaks were observed with lower FWHM values due to higher crystallite sizes.

36 MATERIALS SCIENCE↗

Synthesis and characterization of NiO nanoparticles by thermal decomposition of nickel linoleate and their optical properties

Well dispersed nickel oxide nanoparticles have been synthesized successfully by direct calcination of nickel linoleate. The structure, morphology and properties of the nanoparticles were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy and ultraviolet-visible spectroscopy. Transmission electron microscopic studies show that nickel oxide nanoparticles are uniform with an average size of 14-20 nm. The optical band gap of 3.8 eV is obtained using UV-Visible spectroscopy which exhibits the red shift compared with the bulk counterpart. - Highlights: Black-Right-Pointing-Pointer Synthesis of metal oxide nanoparticles by using metal complexes as precursors. Black-Right-Pointing-Pointer Characterization of isolated nanoparticles using XRD, FTIR, SEM, TEM and HRTEM data. Black-Right-Pointing-Pointer The expected optical properties of these nanoparticles are clarified.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Controlled synthesis of Mn{sub 3}O{sub 4} and MnCO{sub 3} in a solvothermal system

Controlled synthesis of Mn{sub 3}O{sub 4} nanocrystals and MnCO{sub 3} aggregates was achieved by a facile solvothermal method using different divalent manganese source in the solvent of N,N-dimethylformamide (DMF) with/without the introduction of poly(vinylpyrrolidone) (PVP). PVP was used as a co-reducing reagent in the controlled formation of MnCO{sub 3} crystal. The products were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM) and selected-area electron diffraction (SAED), Fourier transform infrared (FTIR) spectra, Raman spectrum and magnetic measurement. Higher process temperature and longer solvothermal time were favorable for the formation of MnCO{sub 3} single phase using MnCl{sub 2} as the manganese source. Mn{sub 3}O{sub 4} nanocrystals were prepared at a relatively lower temperature. MnCO{sub 3} aggregates consisted by small nanoparticles have a certain orientation, showing that the nanocrystals formed earlier through oriented aggregation. The size of Mn{sub 3}O{sub 4} nanocrystals was 22.5 {+-} 7.3 nm and 7.3 {+-} 1.4 nm prepared using MnCl{sub 2} and Mn(CH{sub 3}COO){sub 2}, respectively, at 160 deg. C for 24 h. Raman spectra showed size-dependent characteristics. Smaller Mn{sub 3}O{sub 4} nanoparticle resulted in a red-shift in Raman spectra. Magnetic property of the prepared Mn{sub 3}O{sub 4} nanoparticle was influenced by the size distribution and crystallinity.

36 MATERIALS SCIENCE↗

Preparation of Fe-doped TiO{sub 2} nanotube arrays and their photocatalytic activities under visible light

Fe-doped TiO{sub 2} nanotube arrays have been prepared by the template-based liquid phase deposition method. Their morphologies, structures and optical properties were investigated by scanning electron microscopy, transmission electron microscopy, X-ray diffraction and UV-vis absorption spectroscopy. Their photocatalytic activities were evaluated by the degradation of methylene blue under visible light. The UV-vis absorption spectra of the Fe-doped TiO{sub 2} nanotube arrays showed a red shift and an enhancement of the absorption in the visible region compared to the undoped sample. The Fe-doped TiO{sub 2} nanotube arrays exhibited good photocatalytic activities under visible light irradiation, and the optimum dopant amount was found to be 5.9 at% in our experiments.

36 MATERIALS SCIENCE↗

Influence of praseodymium and nitrogen co-doping on the photocatalytic activity of TiO{sub 2}

Highlights: {yields} The praseodymium and nitrogen co-doped TiO{sub 2} (Pr-N-TiO{sub 2}) powders were prepared and characterized. {yields} The effects on the photocatalytic activity were studied. {yields} The results exhibit that the spectrum absorption region of the co-doped sample is red-shifted to visible light and the recombination of the photo-generated pairs is inhibited. {yields} The photocatalytic activity is greatly improved. -- Abstract: TiO{sub 2} nanoparticles co-doped with different doping concentration of Pr and N were prepared by sol-gel method combined with microwave chemical method. The samples were characterized by XRD, FT-IR, UV-vis, TEM, XPS, PL, and the photocatalytic activity were investigated by photocatalytic degradation of methylene blue (MB). The results indicate that Pr and N ions incorporate into the lattice of TiO{sub 2}, co-doping restrains the increase of grain size, broadens the absorption region to visible light, and inhibits the recombination of the photo-generated electrons and holes. Moreover, the photocatalytic activity of Pr-N-TiO{sub 2} is remarkable improved due to the synergistic effect of the co-doped ions. The degradation rate of MB in 6 h is 92.81%, which is much higher than that of Degussa P25 (45.01%).

36 MATERIALS SCIENCE↗

Preparation and properties of ce-doped TiO{sub 2} photocatalyst

Highlights: ► The cerium ion doped TiO{sub 2} (Ce-TiO{sub 2}) powders were prepared and characterized. ► The spectrum absorption region of Ce-TiO{sub 2} is red-shifted to visible light. ► The recombination of photo-generated electron-hole pairs of Ce-TiO{sub 2} is inhibited. ► The photocatalytic activity was effected by Ce ion content and greatly improved. -- Abstract: TiO{sub 2} nanoparticles doped with different content of Ce ion were prepared by sol–gel method. The samples were characterized by XRD, XPS, TEM, UV–Vis, and PL, the photocatalytic activity was evaluated by photocatalytic degradation of methylene blue (MB) under the irradiation of fluorescent lamp. The results indicate that Ce ion is incorporated into the lattice of TiO{sub 2}, which can restrain the increase of grain size, broaden the absorption region to visible light, and inhibit the recombination of the photo-generated electron and hole pairs. Moreover, the photocatalytic activity of Ce-TiO{sub 2} in MB degradation is evidently enhanced. The MB degradation rate of the sample with Ce:Ti = 0.33% (molar ratio) in 8 h is 90.03%, which is much higher than that of P25 (68.19%).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

One-step synthesis of Fe–N–S-tri-doped TiO{sub 2} catalyst and its enhanced visible light photocatalytic activity

Graphical abstract: FeNS-TiO{sub 2} exhibits stronger SPS response than that of pure TiO{sub 2}, indicating that the FeNS-TiO{sub 2} should have a higher separation rates of photoinduced charge carriers. Further, for the sample FeNS-TiO{sub 2} a broad shoulder SPS response can be seen at the wavelength range from 390 to 550 nm, suggesting that the light absorption in visible region of FeNS-TiO{sub 2} was greatly improved, which is beneficial to the enhancement of photocatalytic activity. Display Omitted Highlights: ► FeNS-TiO{sub 2} catalyst has been synthesized in the presence of ammonium ferrous sulfate. ► The light absorption edge of FeNS-TiO{sub 2} catalyst was red-shifted to visible region. ► The separation efficiency of photoinduced charge carriers of FeNS-TiO{sub 2} was improved. ► The activity enhanced mechanism of FeNS-TiO{sub 2} was discussed in detail. -- Abstract: Fe–N–S-tridoped TiO{sub 2} was synthesized through simple one step sol–gel reactions in the presence of ammonium ferrous sulfate. The resulting materials were characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, diffuse reflectance spectrum and surface photovoltage spectroscopy. Results revealed that Fe and S were incorporated into the lattice of TiO{sub 2} by substituting for some Ti atoms and N for O atoms in the lattice of TiO{sub 2}. Tri-doping with Fe, N and S could inhibit the phase transformation of TiO{sub 2} from anatase to rutile, restrain the growth of crystallite sizes, extended the light absorption into the visible region and separate photoinduced charge carriers. The visible photocatalytic activity of Fe–N–S-tridoped TiO{sub 2} was higher than that of N-TiO{sub 2} and P25 TiO{sub 2}. The enhanced photocatalytic activity was attributed to the small crystallite size, high crystallinity, the intense light absorption in visible region, narrow band gap and high separation efficiency of photoinduced charge carriers.

36 MATERIALS SCIENCE↗

Spectroscopic and magnetic properties of Mn doped GaN epitaxial films grown by plasma assisted molecular beam epitaxy

Graphical abstract: We report here that micro-Raman scattering spectrum for Mn doped GaN thin film has displayed a new peak manifested at 578 cm{sup −1}, by which it is attributed to interior LVM originated by the incorporation of Mn ions in place of Ga sites. Mn doped GaN thin film also showed the typical negative magnetoresistance up to ∼50 K, revealing that the film showed magnetic ordering of spins below 50 K. Display Omitted Highlights: ► GaN and Mn doped GaN single phase wurtzite structures grown by PAMBE. ► The phase purity of the epilayers investigated by HRXRD, HRSEM and EDX. ► The red shift in near band edge emission has been observed using micro-PL. ► A new peak related LVM at 578 cm{sup −1} in micro-Raman scattering measurements confirmed Mn doped into GaN. ► Negative-magnetoresistance investigations have showed that the film has T{sub c} < 50 K. -- Abstract: Spectroscopic and magnetic properties of Mn doped GaN, and GaN epitaxial films have been investigated by employing micro-photoluminescence, micro-Raman, and temperature dependent magneto-resistance measurements. The HR-XRD profiles have shown that the epitaxial films are in hexagonal wurtzite structures. Morphology and composition of the films have been examined by field emission scanning electron microscopy, and energy-dispersive X-ray analysis. Micro-photoluminescence spectrum displayed a dominant near band edge emission at 362 nm, which is assigned to near band edge transition within the hexagonal structure of GaN. Raman scattering profiles showed a new vibrational mode at 578 cm{sup −1}, which is attributed to the vacancy-related local vibrational mode of Mn occupying the Ga site. Temperature dependent negative magnetoresistance measurements provide a direct evidence of magnetic ordering below 50 K for the Mn doped GaN thin film.

36 MATERIALS SCIENCE↗

Synthesis and visible light photocatalysis water splitting property of Cu-doped NaInS{sub 2} synthesized by a hydrothermal method

Graphical abstract: Display Omitted Highlights: ► Cu-doped NaInS{sub 2} powders were prepared by the solvethermal method. ► The samples were characterized by XRD, SEM, and DRS (diffuse reflection spectra). ► The effects of Cu doping ion on the photocatalytic activity were studied. ► The effects of Pt loading on the photocatalytic activity were investigated. -- Abstract: Copper-doped NaInS{sub 2} with hexagonal blocks morphology was prepared by a one-step hydrothermal method and the photocatalytic activity was investigated. The as-synthesized products were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and UV–vis spectroscopy. XRD patterns show that the Cu ions doping has no effect on the crystal structure of NaInS{sub 2}. UV–vis diffuse reflectance spectra show that the absorption wavelength of Cu-doped NaInS{sub 2} occurs red-shift which originated from Cu3d orbital forming impurity level. The photocatalytic activity was increased by Cu doping. The optimal doping amount of Cu{sup 2+} is 1.5 ml.

36 MATERIALS SCIENCE↗

A simple and fast preparation of neodymium-substituted nanocrystalline Mn{sub 2}O{sub 3}

Graphical abstract: Synthesis of Mn{sub 2−x}Nd{sub x}O{sub 3} with mixed morphology -- Abstract: Neodymium (Nd) ions were substituted for manganese in the crystal lattice of synthetic Mn{sub 2}O{sub 3}, via oxidation of Mn(NO{sub 3}){sub 2} in basic solution at room temperature. Doping of Nd into the lattice structure of Mn{sub 2}O{sub 3} has been reported for the first time, which resulted in materials with new composition, morphology and optical properties. The synthesized materials were characterized by XRD, SEM, TEM, HRTEM, XPS and TOF-SIMS. Light (2.6%) Nd doping resulted in a mixture of rods, plates and small sheets, while heavy (8.9%) Nd doping resulted in rods, large sheets and large single crystals. The effect of structural doping of Nd ions into Mn{sub 2}O{sub 3} resulted in a red shift in the absorbance.

36 MATERIALS SCIENCE↗

Ferric oxide quantum dots in stable phosphate glass system and their magneto-optical study

Graphical abstract: We report synthesis of ferric oxide embedded low melting phosphate glass nanocomposite and also the effect of ferric oxide nanoparticles (NCs) content on the optical and magneto-optical properties of the glasses. Faraday rotation of the glass nanocomposites was measured and showed variation in Verdet constant with concentration of ferric oxide. Interestingly, the host glass itself showed fairly good Verdet constant (11.5°/T cm) and there is a threefold enhancement in the Verdet constant of ferric oxide quantum dot-glass nanocomposite. Highlights: ► We synthesize ferric oxide embedded low melting stable phosphate glass nanocomposite. ► Glasses doped with 0.25 and 2% ferric oxide show particle size in the range of 4–12 nm. ► The host phosphate glass itself shows fairly good Verdet constant (11.5°/T cm). ► Glasses doped with 0.25% ferric oxide show high Verdet constant (30.525°/T cm). ► The as synthesis glasses may have potential application in magneto optical devices. -- Abstract: Herein, we report the synthesis of ferric oxide embedded low melting phosphate glass nanocomposite and also the effect of ferric oxide nanoparticles content on the optical and magneto-optical properties of the glasses. The optical study clearly showed red shift in optical cut off with increasing ferric oxide concentration. The band gap of the host glass was observed to be 3.48 eV and it shifted to 3.14 eV after doping with ferric oxide. The glasses doped with 0.25 and 2% ferric oxide showed particle size of 4–6 nm and 8–12 nm, respectively. Faraday rotation of the glass nanocomposites was measured and showed variation in the Verdet constant as per increasing concentration of ferric oxide. Interestingly, the host glass itself showed fairly good Verdet constant (11.5°/T cm) and threefold enhancement was observed in the Verdet constant of ferric oxide quantum dot-glass nanocomposite.

36 MATERIALS SCIENCE↗

Facile synthesis of size-tunable gold nanoparticles by pomegranate (Punica granatum) leaf extract: Applications in arsenate sensing

Highlights: ► Pomegranate leaf extracts mediated rapid gold nanoparticle (AuNP) synthesis. ► The phyto-inspired AuNPs were size-tuned and characterized. ► The reducing and capping agents in the extract were identified. ► The nanoparticles reacted specifically with arsenate (V) ions. - Abstract: When pomegranate leaf extracts were incubated with chloroauric acid (HAuCl{sub 4}), gold nanoparticles (AuNPs) were synthesized. These were characterized by a variety of techniques. With an increasing content of the leaf extract, a gradual decrease in size and an increase in monodispersity were observed. Transmission electron microscope (TEM) images showed that the phyto-fabricated AuNPs were surrounded by an amorphous layer. Gallic acid in the extract mediated the reduction and a natural decapeptide capped the nanostructures. Blocking of thiol groups in the decapeptide cysteine residues caused the nanoparticles to aggregate. On interaction with arsenate (V) ions, the UV–vis spectra of the nanoparticles showed a decrease in intensity and a red-shift. Energy dispersive spectra confirmed the presence of arsenate associated with the AuNPs. Thus, by using these AuNPs, a method for sensing the toxic arsenate ions could be developed.

36 MATERIALS SCIENCE↗

Synthesis and optical study of green light emitting polymer coated CdSe/ZnSe core/shell nanocrystals

Highlights: ► Synthesis of Polymer coated core CdSe and CdSe/ZnSe core/shell NCs. ► From TEM image, the spherical nature of CdSe and CdSe/ZnSe is obtained. ► Exhibiting green band photoemission peak at 541 nm and 549 nm for CdSe core and CdSe/ZnSe core/shell NCs. ► The shell thickness has been calculated by using superposition of quantum confinement energy model. - Abstract: CdSe/ZnSe Core/Shell NCs dispersed in PVA are synthesized by chemical method at room temperature. This is characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), UV/Vis spectra and photoluminescence spectroscopy (PL). TEM image shows the spherical nature of CdSe/ZnSe core/shell NCs. The red shift of absorption and emission peak of CdSe/ZnSe core/shell NCs as compared to CdSe core confirmed the formation of core/shell. The superposition of quantum confinement energy model is used for calculation of thickness of ZnSe shell.

36 MATERIALS SCIENCE↗

Structural and optical properties of core–shell Ag{sub 2}S/HgS nanostructures

Graphical abstract: - Highlights: • Core–shell Ag{sub 2}S/HgS nanostructures are successfully synthesized. • The particle size and the structure were confirmed through TEM images. • The absorbance analysis reveals red shift with increasing shell concentration. • A transition from TYPE 1 to TYPE 2 core–shell nanostructure is observed. - Abstract: Here we report on a two-step synthesis route for fabrication of core–shell Ag{sub 2}S/HgS nanostructures. Nanoscale Ag{sub 2}S semiconductors are prepared by a standard redox reaction using AgNO{sub 3} and CS{sub 2} as the reactants in PVP. HgS layers are developed on Ag{sub 2}S cores through S-S bonding at the interface separating the two systems. The properties of these core–shell nanostructures are studied via various spectroscopic and microscopic tools like UV–Vis absorption spectra, photoluminescence spectra, X-ray diffraction pattern and transmission electron microscopic images. Change in optical properties is observed while varying the shell thickness in the sample. A detailed study on the luminescence properties reveal transition from TYPE 1 to TYPE 2 core–shell nanostructures is observed with increasing shell thickness.

36 MATERIALS SCIENCE↗

Synthesis, magnetic and dielectric characterization of nanocrystalline solid solutions of In{sub 2−x}Ni{sub x}O{sub 3} (x = 0.05, 0.10 and 0.15)

Graphical abstract: Monophasic and crystalline In{sub 2−x}Ni{sub x}O{sub 3} nanoparticles of size 8–15 nm have been synthesized solvothermally and showed red shift in energy band gap which decreases on increasing Ni{sup 2+} concentration in In{sub 2}O{sub 3} host lattice. - Highlights: • Monophasic Ni-doped In{sub 2}O{sub 3} nanoparticles by solvothermal method for first time. • Plausible reaction mechanism using thermogravimetric analysis. • High surface area with small particle size obtained. • Solid solutions exhibit paramagnetism with very weak antiferromagnetic interactions. - Abstract: In{sub 2−x}Ni{sub x}O{sub 3} (x = 0.05, 0.10 and 0.15) nanoparticles were successfully synthesized by solvothermal method by the thermal decomposition of oxalate precursor at 450 °C for the first time. X-ray diffraction studies showed the formation of highly crystalline and monophasic cubic structure of In{sub 2}O{sub 3} which is attributed to the formation of solid solution. These nanoparticles show good optical transmittance in the visible region. Optical measurements showed an energy band gap which decreases with increasing Ni concentration. The grain size decreases from 15 nm to 8 nm and surface area increases from 90 to 254 m{sup 2} g{sup −1} on increasing the Ni concentration. High dielectric constant and dielectric loss has been obtained which indicates the conducting nature of these solid solutions. Magnetic measurements showed that the samples are strong paramagnetic in nature with very weak antiferromagnetic interactions. No evidence of ferromagnetism is observed for these solid solutions at room temperature.

36 MATERIALS SCIENCE↗

Dielectric and photocatalytic properties of sulfur doped TiO{sub 2} nanoparticles prepared by ball milling

Graphical abstract: - Highlights: • Designing of visible light responsive photocatalyst utilizing ball milling. • Sulphur used as dopant in commercial TiO{sub 2} P25 at different atomic percentage. • S doping resulted in an intense increase in absorption in the visible light region. • Newly design photocatalyst exhibited excellent photocatalytic performance. • 0.11 at.% S-doped TiO{sub 2} shows 3-times higher activity than that of TiO{sub 2} P25. - Abstract: Sulfur (S) doped commercial TiO{sub 2} P-25 has been achieved by changing the amount of thiourea using ball milling technique. The results of XRD clearly reveal biphasial anatase and rutile mixtures for all prepared samples and doping of S does not change the morphology of the TiO{sub 2}. The optical absorption edge of S-doped TiO{sub 2} was red shifted with indirect bandgap energy of 2.8 eV. The dielectric studies confirm that the dielectric constant of TiO{sub 2} increases after doping, however it becomes more conductive. Newly designed S-doped TiO{sub 2} photocatalysts exhibited excellent photocatalytic performance for the degradation of methylene blue (MB) under visible light. The overall photocatalytic activity of 0.11 at.% S-doped TiO{sub 2} was significantly 3-times higher than that of commercial TiO{sub 2} P-25 and complete degradation of MB has taken place after 90 min of irradiation under visible light while only 35% dye degraded when the reaction has been carried out in the presence of undoped TiO{sub 2}.

36 MATERIALS SCIENCE↗

Enhancement of photocatalytic properties of Bi{sub 2}WO{sub 6} nanoparticles by Pt deposition

Graphical abstract: - Highlights: • Pt/Bi{sub 2}WO{sub 6} was used for photocatalytic degradation of methyl orange dye. • Photocatalytic degradation was dependent on wt% of Pt reaction time, and weight of catalyst. • Kinetic study revealed that the photocatalytic degradation of methyl orange dye followed the first order. • Catalyst re-use revealed the present photocatalyst remain effective and active after five cycles. - Abstract: Bi{sub 2}WO{sub 6} nanoparticles were prepared using a hydrothermal method, and Pt was immobilized on the surface of Bi{sub 2}WO{sub 6} via a photo-assisted deposition (PAD) method. The samples produced were characterized using X-ray diffraction, ultraviolet and visible spectroscopy, photoluminescence emission spectra, transmission electron microscopy, extended X-ray absorption fine structure, and surface area measurements. Furthermore, the catalytic performance of the Bi{sub 2}WO{sub 6} and Pt/Bi{sub 2}WO{sub 6} samples was examined in the degradation of methyl orange dye (MO) under visible light. The extended X-ray absorption fine structure (EXAFS) results, which showed the presence of peaks assigned to the Pt–Pt at approximately 2.50 Å, indicate the formation of nanoscale Pt features. The UV–vis spectral analysis detected a red shift after loading the Pt into the Bi{sub 2}WO{sub 6}. The maximum degradation efficiency achieved was 100% with 0.3 Pt/Bi{sub 2}WO{sub 6} as the photocatalyst after a 30-min reaction time. The catalyst could be reused without any loss in activity for the first five cycles.

36 MATERIALS SCIENCE↗

Novel yellowish-green emitting luminescence in Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16}:Eu{sup 2+} phosphor

Graphical abstract: The phosphor has two separated emission centers with the dependent emission intensity on Eu{sup 2+} doping. There is a red-shift in the emission due to energy transfer with increasing the Eu{sup 2+}-doping. - Highlights: • Green-origin-emitting phosphors of Eu{sup 2+}-doped Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16} were firstly prepared by chemical sol–gel method. • The tunable luminescence color was realized by the changing Eu{sup 2+}-doping in Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16}. • Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16}:Eu{sup 2+} displays two typical luminescence centers with the emission depending on Eu{sup 2+} doping. • Eu{sup 2+}-doped Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16} phosphor has an excellent thermal stability on the temperature quenching. - Abstract: Color tunable green-origin-emitting phosphor of Eu{sup 2+}-doped phosphate-silicate Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16} was prepared by chemical sol–gel method. The X-ray powder diffraction, the photoluminescence excitation and emission spectra, time resolved spectra, and thermal stability were measured. The excitation spectra can well match with the emission light of near UV-LED chips (360–400 nm). The tunable luminescence was realized by changing Eu{sup 2+}-doping concentration. Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16}:Eu{sup 2+} displays two typical luminescence centers, which were suggested to originate from two Ca{sup 2+} sites in the host. With increasing Eu{sup 2+} doping concentrations, the green emission band shifts to long wavelength. Energy transfer between the two different Eu{sup 2+} ions is discussed by analyzing the photoluminescence excitation and emission spectra, concentration-dependent luminescence intensity, and lifetimes. The dependence of the luminescence intensity of Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16}:Eu{sup 2+} on temperatures was measured. The activation energy (ΔE) for thermal quenching was reported.

36 MATERIALS SCIENCE↗