Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “QUALITY FACTOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Crystal structure, Raman spectra, infrared spectra and microwave dielectric properties of Li2Mg3Ti1-X(Mg1/3Ta2/3)XO6 (0 ≤ x ≤ 0.2) solid solution ceramics

Highlights: • Microwave properties of ε{sub r} = 14.70, Q·f = 200,600 GHz and τ{sub f} = −11.83 ppm/°C were obtained. • A small amount of (Mg{sub 1/3}Ta{sub 2/3}){sup 4+} can obviously improve properties. • Rietveld refinement and spectra were used to analyze properties. • Relationships between intrinsic parameters and properties were established. - Abstract: Li{sub 2}Mg{sub 3}Ti{sub 1-X}(Mg{sub 1/3}Ta{sub 2/3}){sub X}O{sub 6} (x = 0.00, 0.05, 0.10, 0.15, 0.20) solid solution ceramics were prepared by the conventional solid-state reaction method. Rietveld refinements, Raman spectra, infrared spectra, polarizability and bond energy were used to research the changes of microwave dielectric properties of these solid solutions. With the increase of x values from 0 to 0.2, dielectric constants (ε{sub r}) gradually increased, which could be explained by the variations of the polarizability, infrared resonant modes and Raman vibration modes. The variations of the quality factor (Q·f) could be explained by the changes of the bond valences. The temperature coefficient of resonant frequency (τ{sub ƒ}) correlated with the bond energy of TiO bonds. A small quantity of (Mg{sub 1/3}Ta{sub 2/3}){sup 4+} can obviously improve the microwave dielectric properties. Excellent microwave dielectric properties of ε{sub r} = 14.70, Q·f = 200,600 GHz and τ{sub f} = −11.83 ppm/°C were obtained for Li{sub 2}Mg{sub 3}Ti{sub 0.95}(Mg{sub 1/3}Ta{sub 2/3}){sub 0.05}O{sub 6} ceramic sintered at 1550 °C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Introduction to Ingot Niobium

Superconducting radiofrequency (SRF) technology using niobium accelerating cavities was first applied at large scale in the recirculating electron linear accelerator CEBAF—the Continuous Electron Beam Accelerator Facility in Newport News, Virginia, USA, at what is now called Thomas Jefferson National Accelerator Facility, or Jefferson Lab. Building on the high quality factors and peak magnetic fields found in low residual resistivity ratio (low-RRR) solid niobium in the 1970s, Jefferson Lab has reintroduced ingot niobium technology. High tantalum content in ingot niobium is not expected to negatively impact cavity performance, but will reduce the cost of accelerator structures considerably. Optimized low-cost CW linear accelerators built with ingot niobium will show the way for future R&D and industrial applications. This paper portrays the Jefferson Lab SRF context, reviews the early history of ingot niobium technology from over a third of a century ago, explains the technical advantages of that technology's recent reintroduction, and presents the outlook for further development.

43 PARTICLE ACCELERATORS↗

SUBMILLIMETER QUASI-PERIODIC OSCILLATIONS IN MAGNETICALLY CHOKED ACCRETION FLOW MODELS OF SgrA*

High-frequency quasi-periodic oscillations (QPOs) appear in general-relativistic magnetohydrodynamic simulations of magnetically choked accretion flows around rapidly rotating black holes (BHs). We perform polarized radiative transfer calculations with the ASTRORAY code to explore the manifestations of these QPOs for SgrA*. We construct a simulation-based model of a radiatively inefficient accretion flow and find model parameters by fitting the mean polarized source spectrum. The simulated QPOs have a total submillimeter flux amplitude up to 5% and a linearly polarized flux amplitude up to 2%. The oscillations reach high levels of significance 10{sigma}-30{sigma} and high-quality factors Q Almost-Equal-To 5. The oscillation period T Almost-Equal-To 100 M Almost-Equal-To 35 minutes corresponds to the rotation period of the BH magnetosphere that produces a trailing spiral in resolved disk images. The total flux signal is significant over noise for all tested frequencies 87 GHz, 230 GHz, and 857 GHz and inclination angles 10 Degree-Sign , 37 Degree-Sign , and 80 Degree-Sign . The non-detection in the 230 GHz SubMillimeter Array light curve is consistent with a low signal level and a low sampling rate. The presence of submillimeter QPOs in SgrA* will be better tested with the Atacama Large Millimeter Array.

79 ASTRONOMY AND ASTROPHYSICS↗

Temperature Mapping of Nitrogen-doped Niobium Superconducting Radiofrequency Cavities

It was recently shown that diffusing nitrogen on the inner surface of superconducting radiofrequency (SRF) cavities at high temperature can improve the quality factor of the niobium cavity. However, a reduction of the quench field is also typically found. To better understand the location of rf losses and quench, we used a thermometry system to map the temperature of the outer surface of ingot Nb cavities after nitrogen doping and electropolishing. Surface temperature of the cavities was recorded while increasing the rf power and also during the quenching. The results of thermal mapping showed no precursor heating on the cavities and quenching to be ignited near the equator where the surface magnetic field is maximum. Hot-spots at the equator area during multipacting were also detected by thermal mapping.

43 PARTICLE ACCELERATORS↗

Intense 1.6 μm fluorescence of Nd{sup 3+} doped cadmium bismuth silicate glasses

In this work, Judd-Ofelt analysis is applied to rare-earth (RE = Nd{sup 3+}) doped cadmium bismuth silicate (20CdO⋅xSiO{sub 2}⋅(79.5−x)Bi{sub 2}O{sub 3}⋅0.5Nd{sub 2}O{sub 3} (CSBN)) glasses in order to evaluate their potential as well as both glass laser systems and optical materials. The phenomenological Judd-Ofelt parameters (Ω{sub 2}, Ω{sub 4}, Ω{sub 6}) are determined for RE ions with their quality factors and compared with the equivalent parameters for several other hosts. The calculated value of stimulated emission cross-section for {sup 4}F{sub 3/2}→{sup 4}I{sub 11/2} has high and varies 14.72×10{sup −20} to 9.66×10{sup −20} cm{sup 2} with Bi{sub 2}O{sub 3} content in the host glass. The results point out that the glass system is good candidate for the development of photonics devices which are operating near infrared spectral range. Further, the FTIR results reveal that the glasses have BiO{sub 6}, SiO{sub 4} and non-bridging oxygen as local structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Efficient lasing at 2.1 {mu}m in a Ho:YAG laserpumped by a Tm:YLF laser

A laser based on a Ho:YAG crystal operating at a wavelength of {approx}2.1 {mu}m under pumping by Tm:YLF laser radiation with a wavelength of 1.908 {mu}m is studied. The laser operates in cw and repetitively pulsed regimes with a high beam quality (quality factor M{sup 2{<=}}1.2). The cw radiation power reached 15 W with the total optical efficiency of {approx}55 %. In the active Q-switched regime (achieved using an acousto-optic Q-switch), a highly stable repetitively pulsed lasing was obtained with a pulse repetition rate of 2.5-10 kHz, a pulse duration of 25-55 ns, and an average power up to 14.7 W. Using intracavity frequency selection, lasing was obtained at individual spectral lines in three wavelength regions, near 2.09, 2.097, and 2.123 {mu}m. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In-situ scanning electron microscopy and atomic force microscopy Young's modulus determination of indium oxide microrods for micromechanical resonator applications

Electric field induced mechanical resonances of In{sub 2}O{sub 3} microrods are studied by in-situ measurements in the chamber of a scanning electron microscope. Young's moduli of rods with different cross-sectional shapes are calculated from the resonance frequency, and a range of values between 131 and 152 GPa are obtained. A quality factor of 1180–3780 is measured from the amplitude-frequency curves, revealing the suitability of In{sub 2}O{sub 3} microrods as micromechanical resonators. The Young's modulus, E, of one of the rods is also measured from the elastic response in the force-displacement curve recorded in an atomic force microscope. E values obtained by in-situ scanning electron microscopy and by atomic force microscopy are found to differ in about 8%. The results provide data on Young's modulus of In{sub 2}O{sub 3} and confirm the suitability of in-situ scanning electron microscopy mechanical resonance measurements to investigate the elastic behavior of semiconductor microrods.

36 MATERIALS SCIENCE↗

Dependence of microwave dielectric properties on crystallization behaviour of CaMgSi{sub 2}O{sub 6} glass-ceramics

The effects of the crystallization behaviour of CaMgSi{sub 2}O{sub 6} (diopside) glass-ceramics on their microwave dielectric properties were investigated as functions of the Cr{sub 2}O{sub 3} content and heat-treatment method used (one or two steps). The crystallization behaviours of the specimens were affected by the Cr{sub 2}O{sub 3} content as well as by the heat-treatment method employed, and were evaluated using X-ray diffraction and the combined Rietveld and reference intensity ratio (RIR) method. The dielectric constants (K) of the specimens did not change significantly with an increase in the Cr{sub 2}O{sub 3} content. The quality factor (Qf) of the specimens increased for Cr{sub 2}O{sub 3} contents of up to 0.5 wt% Cr{sub 2}O{sub 3}, but then decreased for higher contents. These results could be attributed to the degree of crystallization. For the same Cr{sub 2}O{sub 3} content, the specimens that underwent a two-step heat treatment showed lower K values and higher Qf values than those heat-treated in one-step. These results could be attributed to the smaller crystallite size and higher degree of crystallization in the specimens obtained from the two-step heat treatment compared with those of the specimens heat-treated in one-step method.

36 MATERIALS SCIENCE↗

Quantum electrodynamics in a whispering-gallery microcavity coated with a polymer nanolayer

Quasi-transverse-electric and -transverse-magnetic fundamental whispering gallery modes in a polymer-coated silica microtoroid are theoretically investigated and demonstrated to possess very high-quality factors. The existence of a nanometer-thickness layer not only evidently reduces the cavity mode volume but also draws the maximal electric field's position of the mode to the outside of the silica toroid, where single quantum dots or nanocrystals are located. Both effects result in a strongly enhanced coherent interaction between a single dipole (for example, a single defect center in a diamond crystal) and the quantized cavity mode. Since the coated microtoroid is highly feasible and robust in experiments, it may offer an excellent platform to study strong-coupling cavity quantum electrodynamics, quantum information, and quantum computation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low Cost CE-NMR with Microcoils for Chemical Detection

Understanding speciation in solids and solutions is important for environmental and toxicological purposes. Capillary electrophoresis (CE) is a simple rapid separation technique that can be used to identify species in solution. CE is particularly is well suited for rapid separations of metal containing samples. Direct on-capillary measurement of metal compound speciation can be obtained with nuclear magnetic resonance (NMR). The development of a low-cost microcoil CE-NMR system for in situ characterization of samples of interest is discussed. High precision laser lithography is used to produce copper sputtered microcoils that have comparable resistivity and quality factors to that of hand wound microcoils. A portable NMR system coupled with a CE system has the potential to identify chemical species in aqueous solutions. In addition, transient isotachophoresis can separate and pre-concentrate samples of interest to obtain separate chemical peaks for speciation by online NMR analysis. We are developing separation assays to determine the speciation of chemical complexes in solutions with minimal perturbation to the original sample equilibrium. On-line NMR measurements will be made downstream of the UV detector.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Autopilot for frequency-modulation atomic force microscopy

One of the most challenging aspects of operating an atomic force microscope (AFM) is finding optimal feedback parameters. This statement applies particularly to frequency-modulation AFM (FM-AFM), which utilizes three feedback loops to control the cantilever excitation amplitude, cantilever excitation frequency, and z-piezo extension. These loops are regulated by a set of feedback parameters, tuned by the user to optimize stability, sensitivity, and noise in the imaging process. Optimization of these parameters is difficult due to the coupling between the frequency and z-piezo feedback loops by the non-linear tip-sample interaction. Four proportional-integral (PI) parameters and two lock-in parameters regulating these loops require simultaneous optimization in the presence of a varying unknown tip-sample coupling. Presently, this optimization is done manually in a tedious process of trial and error. Here, we report on the development and implementation of an algorithm that computes the control parameters automatically. The algorithm reads the unperturbed cantilever resonance frequency, its quality factor, and the z-piezo driving signal power spectral density. It analyzes the poles and zeros of the total closed loop transfer function, extracts the unknown tip-sample transfer function, and finds four PI parameters and two lock-in parameters for the frequency and z-piezo control loops that optimize the bandwidth and step response of the total system. Implementation of the algorithm in a home-built AFM shows that the calculated parameters are consistently excellent and rarely require further tweaking by the user. The new algorithm saves the precious time of experienced users, facilitates utilization of FM-AFM by casual users, and removes the main hurdle on the way to fully automated FM-AFM.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Multimode mediated qubit-qubit coupling and dark-state symmetries in circuit quantum electrodynamics

Microwave cavities with high quality factors enable coherent coupling of distant quantum systems. Virtual photons lead to a transverse interaction between qubits when they are nonresonant with the cavity but resonant with each other. We experimentally investigate the inverse scaling of the interqubit coupling with the detuning from a cavity mode and its proportionality to the qubit-cavity interaction strength. We demonstrate that the enhanced coupling at higher frequencies is mediated by multiple higher-harmonic cavity modes. Moreover, we observe dark states of the coupled qubit-qubit system and analyze their relation to the symmetry of the applied driving field at different frequencies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High Damping of Lightweight TiNi-Ti{sub 2}Ni Shape Memory Composites for Wide Temperature Range Usage

A bimodal porous TiNi-Ti{sub 2}Ni shape memory alloy composite (SMAC) with 59% porosity was fabricated by sintering Ti-46at.%Ni elemental powders with pore-forming agent. The porous TiNi-Ti{sub 2}Ni SMAC contains two irregular pores of about 400 and 120 μm. We investigated the microstructure and pore morphology correlated with the mechanical properties and damping capacities of the SMAC. Ti{sub 2}Ni intermetallic phases with size of 1-3 μm were homogeneously distributed in the TiNi matrix. The porous TiNi-Ti{sub 2}Ni SMAC exhibits exceptionally high inverse mechanical quality factor (Q{sup −1}) of ~0.25 at < 40 °C, which is among the highest value reported for porous/dense shape memory alloys or composites to best of our knowledge, and it shows very high compressive fracture strain of about 25%. Moreover, the fabricated porous SMAC at relatively low strain amplitude can exhibit considerable high Q{sup −1} of 0.06 ~ 0.11 for a wide range of temperature between − 90 and 200 °C, which is attributed to the stress concentration distribution provided by the bimodal structure of pores and the massive interfaces between pore/matrix and TiNi/Ti{sub 2}Ni. These porous SMACs can be an ideal candidate for using as a lightweight damping material in the energy-saving applications.

36 MATERIALS SCIENCE↗

SrV2O6: An ultralow-firing microwave dielectric ceramic for LTCC applications

Highlights: • α-SrV{sub 2}O{sub 6} and β-SrV2O{sub 6} phase were coexisted below 500 °C, and stable α-SrV{sub 2}O{sub 6} phase at 630 °C. • Optimum microwave dielectric properties: ε{sub r} ∼9.66, Q × f ∼23,200 GHz, and τ{sub f} ∼ −205 ppm/°C were obtained. • CaTiO{sub 3} successfully adjusted τ{sub f} value toward to near-zero with −2.7 ppm/°C. • Their chemical compatibility with the aluminum electrodes were evaluated. - Abstract: A novel ultralow-firing microwave dielectric ceramic SrV{sub 2}O{sub 6} was prepared at 630 °C through the solid-state method. Phase evolution and crystal structure were analyzed by XRD and Raman spectroscopy. Results show that α-SrV{sub 2}O{sub 6} and β-SrV{sub 2}O{sub 6} phase coexisted when fired at lower temperatures (α-SrV{sub 2}O{sub 6} phase was obtained at 550 °C and remained stable up to 660 °C. Optimum microwave dielectric properties with a quality factor ∼23,200 GHz, a low dielectric constant ∼9.66, and a temperature coefficient of resonant frequency ∼−205 ppm/°C was obtained. SrV{sub 2}O{sub 6} ceramic possessed chemical compatibility with aluminum electrodes when cofired at 630 °C. The temperature stability of SrV{sub 2}O{sub 6} was adjusted by forming composite ceramics with CaTiO{sub 3} and a near-zero τ{sub f} ∼−2.7 ppm/°C was achieved in the 0.75SrV{sub 2}O{sub 6}-0.25CaTiO{sub 3} ceramic. All the results show that the SrV{sub 2}O{sub 6} ceramic might be a promising candidate as substrates in ultra-low temperature cofired (ULTCC) ceramics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Damping in high-frequency metallic nanomechanical resonators

We have studied damping in polycrystalline Al nanomechanical resonators by measuring the temperature dependence of their resonance frequency and quality factor over a temperature range of 0.1-4 K. Two regimes are clearly distinguished with a crossover temperature of 1 K. Below 1 K we observe a logarithmic temperature dependence of the frequency and linear dependence of damping that cannot be explained by the existing standard models. We attribute these phenomena to the effect of the two-level systems characterized by the unexpectedly long (at least two orders of magnitude longer) relaxation times and discuss possible microscopic models for such systems. We conclude that the dynamics of the two-level systems is dominated by their interaction with one-dimensional phonon modes of the resonators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Introduction to Ingot Niobium

Superconducting radiofrequency (SRF) technology using niobium accelerating cavities was first applied at large scale in the recirculating electron linear accelerator CEBAF--the Continuous Electron Beam Accelerator Facility in Newport News, Virginia, USA, at what is now called Thomas Jefferson National Accelerator Facility, or Jefferson Lab. Building on the high quality factors and peak magnetic fields found in low residual resistivity ratio (low-RRR) solid niobium in the 1970s, Jefferson Lab has reintroduced ingot niobium technology. High tantalum content in ingot niobium is not expected to negatively impact cavity performance, but will reduce the cost of accelerator structures considerably. Optimized low-cost CW linear accelerators built with ingot niobium will show the way for future R and D and industrial applications. This paper portrays the Jefferson Lab SRF context, reviews the early history of ingot niobium technology from over a third of a century ago, explains the technical advantages of that technology's recent reintroduction, and presents the outlook for further development.

36 MATERIALS SCIENCE↗

Status of the Short-Pulse X-ray Project (SPX) at the Advanced Photon Source (APS)

The Advanced Photon Source Upgrade project (APS-U) at Argonne includes implementation of Zholents’* deflecting cavity scheme for production of short x-ray pulses. This is a joint project between Argonne National Laboratory, Thomas Jefferson National Laboratory, and Lawrence Berkeley National Laboratory. This paper describes performance characteristics of the proposed source and technical issues related to its realization. Ensuring stable APS storage ring operation requires reducing quality factors of these modes by many orders of magnitude. These challenges reduce to those of the design of a single-cell SC cavity that can achieve the desired operating deflecting fields while providing needed damping of all these modes. The project team is currently prototyping and testing several promising designs for single-cell cavities with the goal of deciding on a winning design in the near future. Here

43 PARTICLE ACCELERATORS↗

Filtration Performance of Layering Masks and Face Coverings and the Reusability of Cotton Masks after Repeated Washing and Drying

In this study, filtration efficiency of different respirators, face masks, and a 2-ply cotton handkerchief bandana was compared for particles in the size range of 60 nm-4 um under a "perfect fit" condition. The filtration efficiency at the most penetrating particle size of 0.3 um on average ranged from 83-99% for N95 and KN95 respirators, 42-88% for surgical masks, 16-23% for cloth masks, and 9% for bandana. We also investigated the effects of using double surgical masks or layering a cloth mask over various surgical masks in terms of their filtration characteristics. In most of these combinations, the filtration efficiency improved by ~25% for particles 0.3-1 um in diameter without any substantial change in the filter quality factor when compared to the highest of the individual mask results. To investigate the reusability of cotton cloth masks, 2-layer cotton fabric sample coupons were machine washed and dried for 52 cycles leading to an increase in inhalation resistance (~20 Pa) without affecting size-resolved filtration efficiency. Scanning electron microscopy revealed that washing and drying led to the gradual deconstruction of cotton fibers at the scale of several micrometers to hundreds of nanometers in the form of delamination of the fiber wall and fibrillation of the nanofiber constituents. Results indicate that cloth masks may be layered over surgical masks for additional benefits, and that cloth masks made out of cotton fabric can be washed and reused numerous times without a significant loss in filtration efficiency.

99 GENERAL AND MISCELLANEOUS↗