Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pretreatment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Adhesion Capabilities of Permanent Foaming Fixatives

DOE-EM have identified an operational requirement for a fixative that can immobilize and/or encapsulate residual contamination in 3D void volumes (pipes, gloveboxes, waste containers, etc.) during D and D activities. Failure to safely and effectively immobilize residual contamination can: Put workers at risk; Contaminate the public and environment; Drive up costs. Commercial-off-the-shelf (COTS) polyurethane (PU) foams is one possible solution and is currently being investigated by Savannah River National Lab (SRNL). Adhesion testing will dictate how well PU foams will adhere and immobilize residual contamination onto a substrate. Results can provide a performance criteria for Section 5 of ASTM E3191: Standard Specification for Permanent Foaming Fixatives Used to Mitigate Spread of Radioactive Contamination. Initial mechanical testing showed intumescent rigid PU foams were best in class (tensile, compression, TGA/DSC) Application of intumescent rigid PU foam in pipe scenario with 'contamination' showed excellent adhesion capabilities as long as foam had contact with pipe. The foam, however, was not able to penetrate 'contamination' but created pockets where the contamination interacted with the substrate. Pretreatment options of pipe were considered to produce better immobilization capabilities. Pretreatment options included COTS products like baking spray, rubber cement, and soap. Foam was still able to immobilize on a global sense, but not a local sense. Essentially acted as a mechanical plug. A tensile tester (MTS Criterion Series 43) was utilized to evaluate the tensile adhesion strength of 6 COTS PU foams. ASTM D1623: Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics. Procedures: PU foams were cured between two smooth 2'' x 2'' 304 stainless steel coupons with hinges glued on plates for gripping support. Parameters Used: Pull rate of 0.1 in/min. Calculations: Tensile adhesion strength, elongation, and ImageJ analysis of how PU foam is left on substrate. Outcome: The PU foam with the best adhesion capabilities would be downselected for further evaluation to be used as a permanent foaming fixative. The rigid PU foams had the best adhesion capabilities with the R1 foam having a max load of 236 N. One of the I-R2 samples reached almost 450 N and another sample reached 2500 N before slipping. The other intumescent foam, I-F4, had the most coverage on the stainless steel coupon's surface from the ImageJ results (61.43% surface coverage). The intumescent foam, I-R2, will be the foam of choice for future testing due its fire retardant and adhesion capabilities. Future directions: Conduct the following experiment in a pipe scenario with the down-selected PU foam. Procedures: PU foam will be cured between in a 304 stainless steel pipe (ID: 4'', OD: 4.5'', Height: 4''). Parameters Used: Compression testing results will be referenced to determine if foam's adhesion strength would be greater its compression strength as its being compressed. Calculations: Compression strength, shear stress, total time elapsed. Conduct further adhesion testing with the down-selected PU foam (I-R2) to be treated as a permanent foaming fixative (PFF). Determine the minimum contact the PFF should have with the substrate for adequate results. Evaluate if PFF's adhesion capabilities is time dependent (3.1.5 of ASTM E3911). Subject PFF to seismic stressors addressed in Safety Basis of Interim Operation documents (SBIO) to further evaluate adhesion capabilities.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Treatment of Problematic Reactive Metal Wastes Using the GeoMelt{sup R} In-Container Vitrification (ICV{sup TM}) Process - 20326

Decommissioning of sodium-cooled reactors and fast reactor technologies has generated a number of reactive metal waste configurations that are problematic to treat and typically lack cost effective treatment methods and disposition options. As a result, Veolia Nuclear Solutions, under contract with Idaho National Laboratory (owned by the U.S. Department of Energy and managed and operated by Battelle Energy Alliance, LLC) demonstrated its GeoMelt{sup R} In-Container Vitrification (ICV){sup TM} technology to safely convert sodium metal to a non-reactive vitrified oxide form. The demonstration project, supported by glass formulation and crucible testing, consisted of a series of ICV{sup TM} melts that processed elemental sodium into stable non-reactive glass. INL is currently implementing GeoMelt{sup R} technology as a means to safely and reliably convert radioactive reactive metal residues that contaminate sodium cooled reactor components into waste forms that comply with existing disposition pathways. Reactive metal wastes require treatment in order to remove the Resource Conservation and Recovery Act (RCRA) reactivity and ignitability characteristics to comply with land disposal restrictions. GeoMelt{sup R}, which is an alternative to other potential treatment approaches, provides a robust approach that chemically converts the reactive metals to an inert oxide while also immobilizing radionuclides in a vitrified waste form with durability equal to or better than vitrified nuclear fuel reprocessing wastes (very robust and inert waste forms). Most other treatment approaches generate hydrogen gas which is problematic. In 2016, Veolia Nuclear Solutions first demonstrated the effectiveness of the GeoMelt{sup R} ICV{sup TM} process in deactivating reactive sodium metal. Crucible, bench-scale, and engineering-scale demonstrations were conducted on several surrogate waste configurations with various ratios of sodium metal and glass formers. Each ratio and configuration demonstrated complete deactivation of the surrogate sodium metal. Follow-on work in 2017 demonstrated the deactivation of reactive sodium by GeoMelt{sup R} ICV{sup TM} at a higher waste loading relative to previously demonstrated work performed in 2016; the higher waste loading optimized glass chemistry while enhancing the economical full-scale treatment of reactive metals. Additionally, follow-on demonstration testing in 2018 and 2019 focused on more complex shapes and other reactive-metals (mocked up Experimental Breeder Reactor II [EBR-II] subassembly, sodium filled heat exchanger, and a can containing sodium potassium alloy) which were all performed at engineering scale. Veolia Nuclear Solutions designed, installed, and commissioned in September 2018, at Perma-Fix Northwest in Richland Washington, a 10-metric ton full-scale GeoMelt unit (GeoMelt{sup R} Richland) for the treatment of reactive metal wastes. As of September 2019, over 900 55-gallon drums containing a total of around 3,500 lb of sodium with low levels of radioactivity have been treated at GeoMelt{sup R} Richland, with resulting glass monoliths disposed at the Nevada National Security Site (NNSS). A full-scale radiological demonstration melt on an actual EBR-II subassembly has also been performed using the full-scale melter in 2019. The GeoMelt{sup R} technology is a proven radioactive waste treatment technology capable of immobilizing radioactive wastes, including bulk rubble such as drums and other steel vessels usually without pretreatment. Utilizing the GeoMelt{sup R} technology to treat reactive metals eliminates pretreatment steps resulting from having to separate the reactive metal from steel containers or jackets as GeoMelt{sup R} can easily operate at temperatures sufficient to melt the steel and expose the reactive metal for treatment. Eliminating handling steps of reactive metals is a significant safety advantage since reactive metals are pyrophoric. The results generated as a part of the 2018-2019 demonstration program are presented in the paper. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Extraction of Value-Added Products from Food Processing Waste Using Dimethyl Ether

Poster for 2024 Intern Poster Session. Food production waste can be valorized to create a circular economy. Traditional extraction methods require pretreatment of the sample through heating or cell disruption, but this contributes to a majority of the process's energy usage for wet biomass. Using dimethyl ether extraction can combine the dewatering and extraction processes into one to skip the pretreatment step while still maintaining similar extraction rates.

09 BIOMASS FUELS↗
DOE OSTI2024

Extraction of Value-Added Products From Food Processing Waste Using Liquid Dimethyl Ether

Technical presentation for 2024 Intern Poster Session. Food production waste can be valorized to create a circular economy. Traditional extraction methods require pretreatment of the sample through heating or cell disruption, but this contributes to a majority of the process's energy usage for wet biomass. Using dimethyl ether extraction can combine the dewatering and extraction processes into one to skip the pretreatment step while still maintaining similar extraction rates.

09 BIOMASS FUELS↗
DOE OSTI2026

Pulsed Electric Field Processing of Apples

Pulsed electric field (PEF) processing is a nonthermal technology that has the potential to improve the efficiency of apple processing, particularly for firm cultivars that are growing in popularity. This study evaluated the effects of PEF pretreatment on the processability and product quality of Cosmic Crisp apples, a modern cultivar known for its firmness. Apples were treated with PEF and assessed for tissue softening, mechanical energy requirements, particle size reduction, browning tendencies, and juice yield. PEF treatment significantly softened the apple tissue, as demonstrated by reduced compression forces in Instron testing, and this softening translated to decreased grinding energy during applesauce production. There were no changes to the particle size distribution of the resulting applesauce. PEF treatment also altered browning behavior and produced higher juice yields following mechanical disruption, suggesting enhanced membrane permeability and mass transfer. Together, these results show that PEF pretreatment can reduce mechanical energy demands and increase extractability without reducing product quality in firm apple varieties. These outcomes highlight the potential of PEF to increase the value recovered from processing-grade apples and to support more efficient and sustainable apple processing operations.

32 - ENERGY CONSERVATION, CONSUMPTION, AND UTILIZA↗
DOE OSTI2026

Higher Wood Density Lowers Feedstock Cost and Has Minimal Impact on Biomass Conversion to Biofuels

Poplar and other woody feedstocks have the potential to provide up to 200 million tons of biomass per year that can be converted to liquid fuels. Most forestry strategies that aim to increase biomass productivity per hectare rely on short rotation plantations of fast-growing varieties. The improvement of the wood density as a key trait itself has largely been overlooked. We evaluated natural variation in wood density across a population of genetically diverse Populus trichocarpa trees grown in a common garden. Wood density varies greatly within this population but is heritable; higher wood density was not systematically associated with reduced growth, challenging assumptions of a trade-off between wood density and biomass accumulation. Furthermore, denser wood led to significant improvements throughout the supply chain including lowering biomass production and transportation costs. Higher density did not correlate with changes in biomass composition. Density did not impact bioconversion in the two feedstock-to-fuel pipelines tested (pretreatment by ionic liquids and fermentation to bisabolene or soaking in aqueous ammonia and fermentation to ethanol) on a representative subset of poplars. These findings highlight wood density as a promising breeding target for accelerating the development of high-yielding, conversion-efficient bioenergy crops and as an avenue for increasing landuse efficiency and reducing biomass transportation cost.

09 BIOMASS FUELS↗
DOE OSTI2025

Unveiling Feedstock Variability: Insights into Corn Stover Conversion - Part I: Physicochemical Properties and Self-Degradation

Transforming agricultural waste into biofuels and bioproducts is crucial to advancing a low-carbon bioeconomy. However, the inherent variability in the composition and quality introduces uncertainties in the conversion efficiency and poses challenges in process development. Through integrating a high-throughput conversion system, material characterization techniques, and advanced data analysis tools, this study investigates the variability of corn stover and its subsequent impacts on carbohydrate conversion. The findings reveal that indoor storage substantially reduces the moisture and ash content and soil contamination, while other properties remain largely unchanged. Self-degradation due to microbial activity during storage decreases the carbohydrate content of corn stover but enhances glucose and xylose yields. A negative correlation is observed between sugar yields and lignin content across samples with varying ash and moisture content. The inhibitory effect of lignin diminishes in self-degraded samples likely due to the disrupted cell wall structure. Although self-degradation slightly increases cellulose crystallinity, no strong correlation was observed between the crystallinity and sugar yield. Hot water pretreatment under mild conditions effectively mitigates inherent variability, consistently improving the sugar yield from corn stover by up to 50%. By elucidating the feedstock variability and its impact on convertibility, these findings offer valuable insights into appropriate feedstock handling and management, highlighting potential strategies to address variability challenges.

09 BIOMASS FUELS↗
DOE OSTI2022

Boosting the Activity of Pd Single Atoms by Tuning Their Local Environment on Ceria for Methane Combustion

Supported Pd single atom catalysts (SACs) have triggered great research interest in methane combustion yet with contradicting views on their activity and stability. Here, in this paper, we show that the Pd SAs can take different electronic structure and atomic geometry on ceria support, resulting in different catalytic properties. By a simple thermal pretreatment to ceria prior to Pd deposition, a unique anchoring site is created. The Pd SA, taking this site, can be activated to Pd δ+ (0<δ<2) that has greatly enhanced activity for methane oxidation: T 50 lowered by up to 130 °C and almost 10 times higher turnover frequency compared to the untreated catalyst. The enhanced activity of Pd δ+ site is related to its oxygen-deficient local structure and elongated interacting distance with ceria, leading to enhanced capability in delivering reactive oxygen species and decomposing reaction intermediates. This work provides insights into designing highly efficient Pd SACs for oxidation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Moving from residual lignocellulosic biomass into high–value products: Outcomes from a long–term international cooperation

Major progress in the bioprocessing of lignocellulose to fuels and value-added chemicals has created the possibility of a low carbon-footprint economy. However, the current complexity and associated costs of lignocellulose conversion result in a higher price for ethanol than for fossil fuels. The cost of cellulosic ethanol production will be lowered by further progress in development of biorefinery technology that produces both ethanol and high-value chemicals with bio-based products that are beginning to penetrate consumer markets in the USA, Brazil, and worldwide. The cost-effectiveness of low carbon-footprint bioproducts will benefit from advances in supplying large amounts of biomass solids to the biorefinery. We describe here outcomes from a successful long-term international cooperation between the Laboratory of Renewable Resources Engineering (LORRE) at Purdue University in the United States and Brazil's Agricultural Research Corporation (EMBRAPA) and Federal University of Sâo Carlos (UFSCar), which has contributed practical pathways to enhance the biorefinery concept. Furthermore, this paper gives an overview of developments that address fundamental knowledge of lignocellulosic biomass pretreatment hydrolysis under optimized operational conditions and bioreactor configurations, and the science and engineering that contributes to the effective production of fuel and ethanol and value-added products from biomass.

09 BIOMASS FUELS↗
DOE OSTI2020

Production of xylose enriched hydrolysate from bioenergy sorghum and its conversion to β-carotene using an engineered Saccharomyces cerevisiae

A new bioprocess has been created that allows for producing β-carotene from the xylose portion of bioenergy sorghum. Bioenergy sorghum was pretreated in a pilot-scale continuous hydrothermal reactor followed by disc refining. Xylose was extracted using low-severity dilute acid hydrolysis. A xylose yield of 64.9% (17.4 g/L) was obtained by hydrolyzing at 120 °C for 5 min with 2% sulfuric acid. The xylose-enriched syrup was separated and concentrated to either 32 g xylose/L (medium-concentrated hydrolysate, MCB) or 66 g xylose/L (high-concentrated hydrolysate, HCB). The non- (NCB), medium-, and high-concentrated xylose syrup were neutralized and fermented to β-carotene using Saccharomyces cerevisiae strain SR8B, which had been engineered for xylose utilization and β-carotene production. In HCB, MCB, and NCB cultures, the yeast produced β-carotene titers of 114.50 mg/L, 93.56 mg/L, and 82.50 mg/L, which corresponds to specific yeast biomass productions of 7.32 mg/g DCW, 8.10 mg/g DCW, and 8.29 mg/g DCW, respectively.

09 BIOMASS FUELS↗
DOE OSTI2023

Production of Designer Xylose-Acetic Acid Enriched Hydrolysate from Bioenergy Sorghum, Oilcane, and Energycane Bagasses

Xylan accounts for up to 40% of the structural carbohydrates in lignocellulosic feedstocks. Along with xylan, acetic acid in sources of hemicellulose can be recovered and marketed as a commodity chemical. Through vibrant bioprocessing innovations, converting xylose and acetic acid into high-value bioproducts via microbial cultures improves the feasibility of lignocellulosic biorefineries. Enzymatic hydrolysis using xylanase supplemented with acetylxylan esterase (AXE) was applied to prepare xylose-acetic acid enriched hydrolysates from bioenergy sorghum, oilcane, or energycane using sequential hydrothermal-mechanical pretreatment. Various biomass solids contents (15 to 25%, w/v) and xylanase loadings (140 to 280 FXU/g biomass) were tested to maximize xylose and acetic acid titers. The xylose and acetic acid yields were significantly improved by supplementing with AXE. The optimal yields of xylose and acetic acid were 92.29% and 62.26% obtained from hydrolyzing energycane and oilcane at 25% and 15% w/v biomass solids using 280 FXU xylanase/g biomass and AXE, respectively.

09 BIOMASS FUELS↗
DOE OSTI2020

Variability in structural carbohydrates, lipid composition, and cellulosic sugar production from industrial hemp varieties

The aim of this study was to determine carbohydrate recovery from hemp for ethanol production and quantify biodiesel from TAG (Triacylglycerol) present in hemp. The structural composition of five different hemp varieties (Seward County-SC, York County-YC, Loup County-LC, 19 m96136-19 m, and CBD Hemp-CBD) were analyzed. Concentration of glucan and xylan ranged between 32.63 to 44.52% and 10.62 to 15.48% respectively. The biomass was then pretreated with Liquid hot water followed by disk milling and then hydrolyzed enzymatically to yield monomeric sugars. High glucose (63-85%) and xylose (73-88%) recovery was achieved. Lipids were extracted from hemp using hexane and isopropanol and then transesterified to produce biodiesel. Approximately, 50% of total fatty acids in SC, LC, and CBD hemp were linoleic acid. Palmitic acid was present between 32 to 50% in varieties YC and 19 m. Highest TAG concentration at 25% of total lipids was observed in CBD hemp. In conclusion, the analysis on lipid composition and high sugar recovery demonstrates hemp as a potential bioenergy crop for ethanol and biodiesel coproduction.

09 BIOMASS FUELS↗
DOE OSTI2022

Stepwise allomorphic transformations by alkaline and ethylenediamine treatments on bamboo crystalline cellulose for enhanced enzymatic digestibility

Efficient modification and decrystallization of cellulose Iβ in lignocellulosic biomass are potential ways to overcome biomass recalcitrance and facilitates enzymatic degradation. Herein, we have treated moso bamboo and microcrystalline cellulose separately by either alkali or ethylenediamine (EDA) treatments, as well as using both in succession. The pretreatments successfully transformed the initial cellulose Iβ allomorph into cellulose II, III I , and cellulose III II . Crystal structures and crystallinities were determined by Rietveld X-ray diffraction and CP/MAS 13 C NMR. Comparatively, the samples that were sequentially treated by EDA and NaOH had low crystallinity (~50%), larger d-spacings of ~4.4 Å for the hydrophobic (110) planes, and less condensed microfibrillar aggregation. The factors simultaneously contributed to as high enzymatic hydrolysis yield as 89.5% and 91.7% respectively, followed by the yields of mercerized cellulose II and cellulose III II allomorph. Here, the stepwise allomorphic transformations may provide new strategies on improving efficiency of saccharification process and biomass utilization.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Advancing biological processing for valorization of plastic wastes

We report the useful applications of plastics are as significant as the problems associated with their disposal. Current waste management strategies are ineffective at preventing the flow of plastics into landfills, wastewater treatment, and the environment. Despite the importance of recycling technologies, most plastics are used for consumables and are discarded after limited usage. Moreover, only certain plastics are recycled, and those that are generally yield lower value products. Discovering alternative routes for valorizing plastic wastes is essential. Emerging research involves the use of biocatalysts (i.e., enzymes and microorganisms) to produce valuable products like specialty polymers, biosurfactants, and drug precursors from these feedstocks. These bioprocesses commonly integrate physio-chemical pretreatments (to generate biologically reactive intermediates) and biological upgrading (to convert intermediates to products). Herein, publications that explore plastic deconstruction technologies and bioprocesses are reviewed with an emphasis on plastic waste valorization. Understanding how microorganisms metabolize the intermediates of plastic degradation and manage their inhibitory effects is a prerequisite for engineering bioprocesses. For these heterogeneous wastes, a paradigm shift from axenic cultivation of microorganisms to cultivation of microbial consortia may benefit conversion efficiency and stress resilience. Thus, a summary is provided for metabolic pathways and constituent enzymes required to synthesize biofuels, biomaterials, and chemicals from biologically reactive intermediates. Colossal challenges associated with the use of plastics as feedstocks for direct biological processing highlight the need for integrating physical, chemical, and biological technologies.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Review on Nonconventional Fibrillation Methods of Producing Cellulose Nanofibrils and Their Applications

The production of cellulose nanofibrils (CNFs) continues to receive considerable attention because of their desirable material characteristics for a variety of consumer applications. There are, however, challenges that remain in transitioning CNFs from research to widespread adoption in the industrial sectors, including production cost and material performance. Here, we cover CNFs produced from nonconventional fibrillation methods as a potential alternative solution. Pretreating biomass by biological, chemical, mechanical, or physical means can render plant feedstocks more facile for processing and thus lower energy requirements to produce CNFs. CNFs from nonconventional fibrillation methods have been investigated for various applications, including films, composites, aerogels, and Pickering emulsifiers. Continued research is needed to develop protocols to standardize the characterization (e.g., degree of fibrillation) of the lignocellulosic fibrillation processes and resulting CNF products to make them more attractive to the industry for specific product applications.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Effects of Surface Roughness on the Electrochemical Reduction of CO 2 over Cu

We have investigated the role of surface roughening on the CO 2 reduction reaction (CO 2 RR) over Cu. The activity and product selectivity of Cu surfaces roughened by plasma pretreatment in Ar, O 2 , or N 2 were compared with that of electrochemically polished Cu samples. Differences in total and product current densities, the ratio of current densities for HER (the hydrogen evolution reaction) to CO 2 RR, and the ratio of current densities for C 2+ to C 1 products depend on the electrochemically active surface and are nearly independent of plasma composition. Theoretical analysis of an electropolished and roughened Cu surface reveals a higher fraction of undercoordinated Cu sites on the roughened surface, sites that bind CO preferentially. Roughened surfaces also contain square sites similar to those on a Cu(100) surface but with neighboring step sites, which adsorb OC-COH, a precursor to C 2+ products. Here, these findings explain the increases in the formation of oxygenates and hydrocarbons relative to CO and the ratio of oxygenates to hydrocarbons observed with increasing surface roughness.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Optimization of Desalination Systems with Detailed Water Chemistry through Integration of Reaktoro in WaterTAP

Chemistry predictions are critical for an accurate estimation of performance and costs in desalination process models, which allows for the estimation of the value of new technologies and the viability of treating new water sources. Herein, we present how an implicit function formulation can be used to integrate the chemical modeling package, Reaktoro, into the techno-economic assessment and modeling platform, WaterTAP. This approach resolves the critical issues of integrating large-scale thermodynamic models and databases into equation-oriented process models while allowing more flexibility relative to previously presented surrogate-based methods. We describe how this integration into Pyomo and WaterTAP models is implemented and used through the open-source package Reaktoro-PSE . We first validate this integration approach by performing optimization on a previously presented desalination treatment train with softening and acid addition as the pretreatment steps. Then, to demonstrate the value of this approach, we extend the cost-optimization problem to include the simultaneous addition of lime and soda ash for softening, and HCl and H 2 SO 4 in the acidification steps. Finally, we were able to confirm the previously established results that were obtained by using surrogate models and demonstrate that the implicit function approach enables exploration of different feedwater compositions and a larger number of chemicals and their combinations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Mild, Electroreductive Lignin Cleavage: Optimizing the Depolymerization of Authentic Lignins

Among candidate strategies to depolymerize lignin, electroreduction has promise as a mild, environmentally friendly, low-cost method to cleave lignin’s most common linkage, the β-O-4 bond. Much of the prior work on lignin electrolysis has focused on anodic (oxidative) approaches, while most available electroreduction studies have studied lignin model compounds rather than authentic lignin. Here, after optimizing with a model system, we investigated the room-temperature electroreductive cleavage of four common lignin samples from different pretreatment approaches, including Kraft, Soda, GVL, and Cu-AHP lignin. This mild electrolysis process resulted in the solubilization of 45% of the GVL lignin and 60% of the Cu-AHP lignin, affording approximately 17.6 and 19.4 wt % of monomeric materials, respectively. Furthermore, the present work is an encouraging first step toward an electroreductive strategy for lignin depolymerization and upgrading.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗