Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Position Determination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

The spectrum and position of solar noise storms at decameter wavelengths

Decametric storm radiation during the period July-August 1970 has been observed simultaneously with a high sensitivity spectrograph at Arecibo Observatory and with the log-periodic, swept-frequency array of the Clark Lake Radio Observatory. The observations complement each other; different types of fine structure emissions can be easily identified on the spectrograph records and their position can be determined from the swept-frequency recordings. The relative positions of the different emissions which have been observed during the storms are studied. Four distinct sources appear to be present. The continuum emission, the type I bursts and the flare-related type III's are all emitted at different locations. The storm type III bursts, type IIIb's and drift pairs overlap in position, but appear at different locations than the previously mentioned sources.

De La Noe, J.↗
NASA NTRS2011

Method and system for non-linear motion estimation

A method and system for extrapolating and interpolating a visual signal including determining a first motion vector between a first pixel position in a first image to a second pixel position in a second image, determining a second motion vector between the second pixel position in the second image and a third pixel position in a third image, determining a third motion vector between one of the first pixel position in the first image and the second pixel position in the second image, and the second pixel position in the second image and the third pixel position in the third image using a non-linear model, determining a position of the fourth pixel in a fourth image based upon the third motion vector.

Lu, Ligang↗
NASA NTRS1996

Some Considerations in the Determination of the Accuracy of a Measurement in Space of the Newtonian Gravitational Constant (G)

A commonly suggested method for determining the Newtonian constant of universal gravitation (G) is to observe the motion of two bodies of known mass moving about each other in an orbiting laboratory. In low Earth orbit (LEO), bodies constructed of even the densest material available experience a gravitational attraction that is several times smaller than the 'tidal' forces (due to their proximity to the Earth), which tend to pull them apart. While the tidal forces do not preclude stable orbits of the two objects about each other, they and the Coriolis force (in the rotating laboratory) dominate the motion, and the gravitational attraction of the two bodies may be considered a weak (but significant) contribution to the motion. As a result, compared to an experiment that would be performed in a laboratory far from the Earth, greater accuracy of measuring the motion of the two bodies may be required for a given accuracy in the determination of G. We find that the accuracy with which positions must be determined is not much different in an experiment in LEO than in one performed far from the Earth, but that rotational periods must be determined more accurately. Using a curvature matrix analysis, we also find that a value of G may be extracted (with some loss in accuracy, but probably some practical gain) from an analysis of the time dependence of the distance between the bodies rather than of a full specification (distance and direction) of their relative positions. A measurement of the gravitational constant to one part in 10(exp 4) continues to be thinkable, but one part in 10(exp 5) will be very difficult.

Baker, Stephen D.↗
NASA NTRS1994

Time transfer using geostationary satellites: Implementation of a Kalman filter

Since 1988, various experiments have shown that the TV signals transmitted by direct TV satellites may easily be used to perform time transfers at the level of a few tens of nanoseconds, the main source of error being the uncertainty on the satellite position. We first present the two methods used in our experiment to reduce the effects of the satellite residual motion: the first one consists in estimating the longitude variations of the satellite and then using this information to improve other measurements. This allows reducing the uncertainty to values between 9 and 50 nanoseconds according to the position of the involved stations. In the second method we determine the satellite position by using the data collected by three calibrated stations. Time transfer between each of these stations and a fourth one has been shown to be achievable at the precision level of ten nanoseconds. A new approach based on the use of a Kalman filter is proposed in order to take into account the dynamics of the geostationary satellite. The precisions on orbital elements and clock differences and rates determination given by the first simulated applications of the Kalman filter are presented and compared to those obtained by the other methods.

Meyer, F.↗
NASA NTRS1989

Acoustic levitation in the presence of gravity

The method of Gor'kov (1961) has been applied to derive general expressions for the total potential and force on a small spherical object in a resonant chamber in the presence of both acoustic and gravitational force fields. The levitation position is also determined in rectangular resonators for the simultaneous excitation of up to three acoustic modes, and the results are applied to the triple-axis acoustic levitator. The analysis is applied to rectangular, spherical, and cylindrical single-mode levitators that are arbitrarily oriented relative to the gravitational force field. Criteria are determined for isotropic force fields in rectangular and cylindrical resonators. It is demonstrated that an object will be situated within a volume of possible levitation positions at a point determined by the relative strength of the acoustic and gravitational fields and the orientation of the chamber relative to gravity.

Collas, P.↗
NASA NTRS1995

FORTRAN program for analyzing ground-based radar data: Usage and derivations, version 6.2

A postflight FORTRAN program called 'radar' reads and analyzes ground-based radar data. The output includes position, velocity, and acceleration parameters. Air data parameters are also provided if atmospheric characteristics are input. This program can read data from any radar in three formats. Geocentric Cartesian position can also be used as input, which may be from an inertial navigation or Global Positioning System. Options include spike removal, data filtering, and atmospheric refraction corrections. Atmospheric refraction can be corrected using the quick White Sands method or the gradient refraction method, which allows accurate analysis of very low elevation angle and long-range data. Refraction properties are extrapolated from surface conditions, or a measured profile may be input. Velocity is determined by differentiating position. Accelerations are determined by differentiating velocity. This paper describes the algorithms used, gives the operational details, and discusses the limitations and errors of the program. Appendices A through E contain the derivations for these algorithms. These derivations include an improvement in speed to the exact solution for geodetic altitude, an improved algorithm over earlier versions for determining scale height, a truncation algorithm for speeding up the gradient refraction method, and a refinement of the coefficients used in the White Sands method for Edwards AFB, California. Appendix G contains the nomenclature.

Haering, Edward A., Jr.↗
NASA NTRS1973

Performance comparison of three normal-shock position sensors for mixed-compression inlets

The performance of three types of normal shock position sensors for supersonic inlets is described. All three sensors determined the shock position from the presence of the large pressure gradient at the normal shock location. The logic means for the three sensors were: (1) electronic, using pressure transducers, (2) fluidic, and (3) direct-coupled pressure switches. The sensors were evaluated in a two-dimensional, Mach 2.7, supersonic inlet having 30-percent internal supersonic area contraction. Both dynamic (from 1 to 80 Hz) and static tests were conducted.

Dustin, M. O.↗
NASA NTRS1991

Calibration of the Aronson 6-DOF robotic platform

A discussion is presented of the calibration of the Aronson six-degree-of-freedom platform. Absolute encoders are used to determine the starting positions of all six joints. The hardware implemented are described in detail. Software programs are used to calibrate the hardware and to build the look-up tables that are needed in determining the initial joint positions. The descriptions of all software routines used are given.

Lin, Amy Y.↗
NASA NTRS1993

Short Arc Orbit Determination for Altimeter Calibration and Validation on TOPEX/Poseidon

TOPEX/Poseidon (T/P) is a joint mission of US NASA and French CNES design launched August 10, 1992. It carries two radar altimeters which alternately share a common antenna. There are two project designated verification sites, a NASA site off the coast at Pt. Conception, CA, and a CNES site near Lampedusa Island in the Mediterranean Sea. Altimeter calibration and validation for T/P is performed over these highly instrumented sites by comparing the spacecraft's altimeter radar range to computed range based on in situ measurements which include the estimated orbit position. This paper presents selected results of orbit determination over each of these sites to support altimeter verification. A short arc orbit determination technique is used to estimate a locally accurate position determination of T/P from less than one revolution of satellite laser ranging (SLR) data. This technique is relatively insensitive to gravitational and nongravitational force modeling errors and is therefore essentially geometrical. The quality of these short arc orbits is demonstrated by covariance analysis and by comparison to orbits determined from longer arcs of data and other tracking data types, such as DORIS and Global Positioning System Demonstration Receiver (GPSDR) data.

radar↗
NASA NTRS1982

Modulated Multiple Slit Camera for improved localization of gamma ray bursts

An instrument is described in which a cylindrical modulation collimator is added to one half of a Multiple Slit Camera (MSC) coded-aperture imaging system. The instrument provides gamma-ray burst positions from a single spacecraft that are as precise as the best positions from the long-baseline network of interplanetary spacecraft. The determination of fine positions is described, and the fine-position capability is shown to operate over about two-thirds of the MSC's nearly all-sky field of view. It is noted that the addition of the modulation collimator only slightly reduces the system's sensitivity and can improve the location precision for gamma-ray bursts and slower hard-X-ray transients to about 0.1 sq arcmin.

Gorenstein, P.↗
NASA NTRS2000

The DORIS Data Center at the CDDIS

The DORIS system (Doppler Orbitography and Radio positioning Integrated by Satellite) was designed and developed by CNES, the National Geographic Institute, IGN (Institut G6ographique National), and the Space Geodesy Research Group, GRGS (Groupe de Recherches de Geodesie Spatiale - CNES/CNRS/Universite Paul Sabatier) to meet new needs for the precise determination of satellite positions on their orbits and for precise positioning of terrestrial beacons. This system has been carried since 1990 on the French SPOT 2 satellite, since 1992 on the French/American satellite TOPEX/POSEIDON, and since 1998 on the French SPOT 4 satellite. It will be part of the JASON (CNES/NASA) and ENVISAT (ESA) altimetric missions and also the SPOT follow-on Earth observation missions. DORIS is a radio-electrical system which takes Doppler measurements between a satellite in low orbit and a permanent global network for the purpose, on the one hand, of determining the satellite's position in orbit, and on the other hand, of locating ground beacons with a high degree of precision.

Noll, Carey E.↗
NASA NTRS1993

Precise Tracking of the Magellan and Pioneer Venus Orbiters by Same-Beam Interferometry. Part 2: Orbit Determination Analysis

A new radio metric positioning technique has demonstrated improved orbit determination accuracy for the Magellan and Pioneer Venus Orbiter orbiters. The new technique, known as Same-Beam Interferometry (SBI), is applicable to the positioning of multiple planetary rovers, landers, and orbiters which may simultaneously be observed in the same beamwidth of Earth-based radio antennas. Measurements of carrier phase are differenced between spacecraft and between receiving stations to determine the plane-of-sky components of the separation vector(s) between the spacecraft. The SBI measurements complement the information contained in line-of-sight Doppler measurements, leading to improved orbit determination accuracy. Orbit determination solutions have been obtained for a number of 48-hour data arcs using combinations of Doppler, differenced-Doppler, and SBI data acquired in the spring of 1991. Orbit determination accuracy is assessed by comparing orbit solutions from adjacent data arcs. The orbit solution differences are shown to agree with expected orbit determination uncertainties. The results from this demonstration show that the orbit determination accuracy for Magellan obtained by using Doppler plus SBI data is better than the accuracy achieved using Doppler plus differenced-Doppler by a factor of four and better than the accuracy achieved using only Doppler by a factor of eighteen. The orbit determination accuracy for Pioneer Venus Orbiter using Doppler plus SBI data is better than the accuracy using only Doppler data by 30 percent.

Folkner, W. M.↗
NASA NTRS1993

Short arc orbit determination for altimeter calibration and validation on TOPEX/POSEIDON

TOPEX/POSEIDON (T/P) is a joint mission of United States' National Aeronautics and Space Administration (NASA) and French Centre National d'Etudes Spatiales (CNES) design launched August 10, 1992. It carries two radar altimeters which alternately share a common antenna. There are two project designated verification sites, a NASA site off the coast at Pt. Conception, CA and a CNES site near Lampedusa Island in the Mediterranean Sea. Altimeter calibration and validation for T/P is performed over these highly instrumented sites by comparing the spacecraft's altimeter radar range to computed range based on in situ measurements which include the estimated orbit position. This paper presents selected results of orbit determination over each of these sites to support altimeter verification. A short arc orbit determination technique is used to estimate a locally accurate position determination of T/P from less than one revolution of satellite laser ranging (SLR) data. This technique is relatively insensitive to gravitational and non-gravitational force modeling errors and is demonstrated by covariance analysis and by comparison to orbits determined from longer arcs of data and other tracking data types, such as Doppler Orbitography and Radiopositioning Integrated by Satellite (DORIS) and Global Positioning System Demonstration Receiver (GPSDR) data.

Williams, B. G.↗
NASA NTRS2000

Semi-Major Axis Knowledge and GPS Orbit Determination

In recent years spacecraft designers have increasingly sought to use onboard Global Positioning System receivers for orbit determination. The superb positioning accuracy of GPS has tended to focus more attention on the system's capability to determine the spacecraft's location at a particular epoch than on accurate orbit determination, per se. The determination of orbit plane orientation and orbit shape to acceptable levels is less challenging than the determination of orbital period or semi-major axis. It is necessary to address semi-major axis mission requirements and the GPS receiver capability for orbital maneuver targeting and other operations that require trajectory prediction. Failure to determine semi-major axis accurately can result in a solution that may not be usable for targeting the execution of orbit adjustment and rendezvous maneuvers. Simple formulas, charts, and rules of thumb relating position, velocity, and semi-major axis are useful in design and analysis of GPS receivers for near circular orbit operations, including rendezvous and formation flying missions. Space Shuttle flights of a number of different GPS receivers, including a mix of unfiltered and filtered solution data and Standard and Precise Positioning Service modes, have been accomplished. These results indicate that semi-major axis is often not determined very accurately, due to a poor velocity solution and a lack of proper filtering to provide good radial and speed error correlation.

Carpenter, J. Russell↗
NASA NTRS2000

Semi-Major Axis Knowledge and GPS Orbit Determination

In recent years spacecraft designers have increasingly sought to use onboard Global Positioning System receivers for orbit determination. The superb positioning accuracy of GPS has tended to focus more attention on the system's capability to determine the spacecraft's location at a particular epoch than on accurate orbit determination, per se. The determination of orbit plane orientation and orbit shape to acceptable levels is less challenging than the determination of orbital period or semi-major axis. It is necessary to address semi-major axis mission requirements and the GPS receiver capability for orbital maneuver targeting and other operations that require trajectory prediction. Failure to determine semi-major axis accurately can result in a solution that may not be usable for targeting the execution of orbit adjustment and rendezvous maneuvers. Simple formulas, charts, and rules of thumb relating position, velocity, and semi-major axis are useful in design and analysis of GPS receivers for near circular orbit operations, including rendezvous and formation flying missions. Space Shuttle flights of a number of different GPS receivers, including a mix of unfiltered and filtered solution data and Standard and Precise Positioning, Service modes, have been accomplished. These results indicate that semi-major axis is often not determined very accurately, due to a poor velocity solution and a lack of proper filtering to provide good radial and speed error correlation.

Carpenter, J. Russell↗
NASA NTRS1973

Corrections of satellite positions in near-real time.

The influence of sudden increases of electron content on the accurate determination of the position of a satellite is investigated based on a spherically stratified ionospheric model. Using the total electron content information from Faraday rotation measurements, a procedure is presented whereby the corrections of satellite position due to the unpredicted electron increase can be accounted for without the need to know the spatial distribution of the additional electrons.

Poularikas, A. D.↗
NASA NTRS1988

Calculating Robot-Joint Coordinates From Image Coordinates

Detailed knowledge of robot joints not required. Algorithm generates approximate mathematical models of coordinates of joints of robot as functions of coordinates of points in images of work region viewed by television cameras. Joint coordinates necessary to position and orient end effector calculated by mathematical models fitted to experimentally determined data on positions, orientations, and joint coordinates. Generates models as functions of desired location of end effector of robot. Does not require priori knowledge of kinematic equations of robot.

Source record↗