Notre Dame Plutonium Spectrum Analysis
The spectrum analysis results of a plutonium sample are provided.
38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
SEARCH · Engineering Papers
Results for “Plutonium”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Defects and Mechanical Behavior of Plutonium [Slides]
Defects are important because they heavily influence material properties (e.g. strength, ductility, elasticity, conductivity, phase transformation temperatures (melting point), corrosion resistance, etc.). At LANL defects in plutonium are being characterized using many different methods (e.g. EXAFS, XRD, microscopy, RUS, DSC, dilatometry, density, etc.) My goal is to introduce a complimentary method of understanding defects in δ-Pu using the mechanical microscope concept. Using well-developed theories of first principles strengthening mechanisms (i.e. how defects influence strength) and carefully designed experiments, mechanical testing can compliment other defect characterization tools.
36 MATERIALS SCIENCE↗
Default Radioactive and Hazardous Waste Management (RHWM) Dose Conversion Factors (DCFs) and Weighting Factors and plutonium-239 equivalent Curie (PE-Ci) methodology for acceptance into the Waste Storage Facilities
DOE-STD-5506-2007 (Ref. 1) is the standard that provides the methodology for preparing hazard analysis and accident analysis for transuranic (TRU) waste facilities. The Waste Storage Facilities hazard and accident analysis for the DSA is developed in accordance with DOE-STD- 5506-2007. Two related issues need to be addressed when implementing DOE-STD-5506-2007 regarding the calculation of consequences from TRU waste releases in accident analysis: Consequences determined in accident analysis must be modeled using inhalation Dose Conversion Factors (DCFs) that are consistent with those from the International Commission on Radiological Protection Publication 72 (ICRP-72, Ref. 2).; The use of a statistical Material at Risk (MAR) representing the distribution of radiological loading of TRU waste containers based on the use of a plutonium-239 equivalent Curie (PE-Ci) methodology. The PE-Ci methodology simplifies accident analysis by allowing one to model releases based on the Curie value of one standard nuclide (e.g., Pu-239) instead of needing to model releases for every potential nuclide of interest. This is accomplished by normalizing the Curie value of all nuclides to a single Curie value of a standard nuclide by using a Weighting Factor that is a ratio of the DCFs associated with the nuclides and that of the standard nuclide. By using the ICRP-72 DCFs to calculate PE-Ci values used in the statistical MAR, the accident analysis that uses that statistical MAR will be consistent with the consequence methodology identified in DOE-STD- 5506-2007.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Plutonium Dedicated Surface Probe Microscopy Capability
An atomic force microscope (AFM) equipped with gas dosing capabilities and a scanning tunneling microscope (STM) housed within a vacuum chamber with Pu sputtering capabilities and the potential for rapid heating via electron bombardment have been devised for investigations of Pu surface aging (such as oxidation, corrosion, and self-irradiation damage), reactivity, and rapid heating. These instruments are capable of probing Pu surface areas ranging from a fractions of nm2 (STM) to hundreds of μm2 (AFM) to obtain three dimensional imaging of surface microstructure and morphology, as well as mapping of the local electronic structure (i.e., the occupied and unoccupied electronic states), surface chemical, and mechanical properties. A detailed description of our surface probe microscopy (SPM) capability, specifically designed for handling of Pu coupons is given in the references. In FY20, four tasks have been undertaken: Resumed maintenance of Pu AFM and modification of STM capabilities including calibration, annual measurement of Pu surface, and implementation of additional instrumentation for rapid heating effort; Analyzed AFM FY19 gas dosing experiment data of 7 at% gallium-stabilized δ-phase Pu (δ-Pu) coupon; Determined the direction of future gas dosing experiments to investigate reversibility of surface features; and, Published a paper titled "Effects of ion sputtering on plutonium surfaces" in the Journal of Nuclear Materials.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Characteristics of Uranium-Plutonium Mixed Oxide Nondestructive Assay Standards
A set of six well-characterized, homogeneous, mixed HEU-WGPu oxide standards has been manufactured for and are proposed for qualification as NDA working reference standards with SAFE-NMCA. These standards, if approved, will provide the basis for qualifying the FRAM isotopic systems for use in accountability measurements of 235U in the presence of Pu for unknown mixed U-Pu items by nondestructive assay. The U to Pu elemental mass ratios of the six analytical standards are nominally in the proportions 0.1, 0.25, 1.0, 2.5, 10, and 20; these values were chosen to span the U/Pu mass ratios of inventory items that ultimately will be measured by nondestructive assay and which currently reside in long term storage. The measured characteristics, including plutonium and uranium elemental masses and isotopic distribution, of each standard and relevant source documentation are reported here.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Design of Sample Holder for Plutonium Coupon Studies
In order to gain better understanding of the plutonium (Pu) corrosion behaviors and reaction kinetics, it is imperative that coupon experiments must be performed on well-defined surfaces. The reactions at the samples’ surfaces have to be properly monitored in terms of reactive gaseous pressures and temperatures. The pressure can be measured by using a pressure gauge, the temperature can be detected with calibrated thermal couples and/or pyrometric camera. These devices do not interfere with the chemistry of the surface reaction. However, to obtain information from the surface reaction, the aggressively machined edge and the back side of the Pu coupons need to be shielded from the applied gases. The coupons are typically made to 5/8 inch in diameter and 0.065 inch in thickness. To this end, a sample holder was designed which can seal the machined edge and the back side of coupons from the exposed gases, thus allowing proper surface reaction. The holder design was fabricated and had been tested with several coupon samples. We have achieved perfect sealing of the machined edge and the back side of the coupons, even when the coupons’ thicknesses are vastly different than the nominal thickness for which the sample holders were fabricated for. This write-up is to document the design of the holder and provide a description of the procedures to properly put the components together.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Independent Gamma Spectroscopy Analysis of a Plutonium Oxide Sample
Independent gamma spectroscopy data analysis of a plutonium oxide sample was requested on July 23, 2021. The primary request was to assess the Pu-239 activity/mass of the sample using previously collected gamma spectral data. Using the provided gamma spectral analysis report and spectral files, an independent evaluation of the data was conducted without any prior knowledge of the isotopic activity/mass of the sample.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Recommended Updates to Solubility Controls for Modeling Leaching of Technetium, Uranium, Neptunium, Plutonium, and Iodine from the Residual Waste Layer of Closed Savannah River Site High Level Waste Tanks
The objective of this report is to relate waste leaching experiments by the Savannah River National Laboratory (SRNL) to performance assessment modeling of release of several radionuclides from residual waste in closed high-level waste tanks. SRNL leached residual waste from Tanks 18F and 12H with solutions simulating the modeled evolution of pore fluids in residual waste layers of closed tanks through various stages of grout degradation. Tc-99, uranium isotopes, Np-237, plutonium isotopes, and I-129 were analyzed in the leachate multiple times over 90 days.
07 ISOTOPE AND RADIATION SOURCES↗
Plutonium Infrastructure Engineering Division (PIE) [Poster]
PIE supports $\$8.5$ Billion of Plutonium Infrastructure upgrade projects. Approximately $\$167$ Million of architectural & engineering service contracts awarded. PIE Division consists of 130 personnel and growing.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Status of the Slide Rule Update - Phase 4 Plutonium Configurations – Delayed Gamma [Slides]
The fourth phase of Slide-Rule update gives a calculation scheme for DFG doses and its application to five plutonium material, as well as comparisons between radiation transport and depletion codes such as MCNP, SCALE, COG and FISPACT. Overall, DFG dose rates calculated by each laboratory led to consistent results. Extra effort is under way to identify the cause of the remaining differences, especially for case 2, by comparing precisely the gamma source, and particularly nuclides inventories.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Radiolysis of Organic Solvents in the Presence of Plutonium
In this report, we describe a set of organic solvent radiolysis experiments performed at Lawrence Livermore National Laboratory. The goal of these experiments was to test for radiolytic solvent damage due to the presence of plutonium (Pu) particulates in solvent baths that are part of a materials production and cleaning workflow. The solvents (NOVEC 72DE and NOVEC 7500) were tested at a Pu activity level of ~1 microCi/mL using weapons grade Pu -- equivalent to 0.35 g Pu dispersed in a 5 gallon fluid bath filled to 4.5 gallons. Experiments were performed using fresh solvent and solvent that was 95% evaporated; the evaporated solvent was meant to represent fluids that may be in the solvent bath and subjected to evaporation and refilling without a full solvent replacement.
38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
Discovery of Contamination Spread at the Plutonium Finishing Plant during Demolition Activities
Between December 14 and December 18, 2017, contamination was detected outside of the Contamination Area (CA) at the Plutonium Finishing Plant (PFP) demolition zone, including around the PFP offices and on multiple vehicles located outside the radiological boundary. The consequences of this event were personnel exposure and potential radiological contamination leaving the Hanford Site. The scope of this causal analysis is focused at the events leading up to and including the contamination spread outside the PFP CA and development of the corrective actions to prevent recurrence. Specific methods to be used upon resumption of demolition activities are under development at the time that this report is approved and will be fully vetted by the DOE-RL and the DOE Expert Panel. It should also be noted that studies of radiological emissions from Hanford are part of the routine National Emission Standards for Hazardous Air Pollutants Compliance Monitoring (NESHAPS) Program and are not addressed in this report.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Data Testing with Zero Power Reactor (ZPR), Zero Power Physics Reactor (ZPPR), and New Thermal Epithermal eXperiments (TEX) Plutonium Benchmarks [Slides]
This presentation states that new TSLs in ENDF/B-VIII.0 will reduce the overprediction of the library for the most moderated cases. The differences between VII.1 and VIII.0 are driven by the 239 Pu changes and are consistently higher for all configurations. The VIII.0 239 Pu thermal cross sections were specifically adjusted lower to better predict plutonium thermal solutions criticality benchmarks, yet they overpredict the TEX thermal configurations, moderated by PE. Other, smaller differences have been seen for 240 Pu and 56 Fe. PMM-002 has shown utility in testing cross sections over a wide range of neutron energies.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
On the Uranium and Plutonium Nuclear Data Evaluations [Slides]
This presentation provides overviews of uraniums, 233 U and 235 U, plutonium research including motivations, current status in ENDF/B-VIII.0, the inclusion of sub-thermal data, and the inclusion of LANL ratio capture-to-fission data. Additionally, the preliminary fit of Mosby’s data as reported, fluctuating neutron multiplicities, uncertainty in evaluated libraries, and experimental effects are also presented. The presentation concludes by providing a summary of plans for the U and Pu evaluation work.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
TA-55 building entrusted with more plutonium capability: What does it mean for the mission?
The first floor of the Radiological Laboratory/Utility/Office Building at TA-55, known as RLUOB (roo-lob) or Plutonium Facility-400 (PF-400), will soon become a bustling and dynamic space as employees and programs increase their work scope thanks to the new hazard category 3 designation. On Feb. 7, NNSA gave the final stamp of approval designating RLUOB as a hazard category 3 (HC-3) nuclear facility. RLUOB has been designated as a radiological facility (less than HC-3) since 2013, when the first phase of RLUOB Equipment Installation was completed. HC-3 is a level up in facility hazard category, a major effort to support the national security mission.
96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
Characterizing PuO 2 Powder at Oak Ridge National Laboratory for the Multi-Lab Plutonium Process Signatures Campaign FY 2022
This report highlights the development of advanced analytical capabilities at Oak Ridge National Laboratory to characterize PuO 2 powder to support the Multi-Lab Plutonium Process Signatures Campaign in FY 2022. Two samples from a batch of 76 statistical precipitation runs were packaged and shipped from Pacific Northwest National Laboratory to Oak Ridge National Laboratory at the beginning of FY 2022. Techniques were used to characterize the sample, including powder X-ray diffraction, Raman spectroscopy, and diffuse reflectance spectroscopy. A brief description of each technique, the results and discussion, and future work are described in this report. Opportunities to expand current capabilities and include additional analytical capabilities for the next campaign will also be discussed.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Characterization of Aluminum Metal Powders for Plutonium-238 Program
As part of radioisotope thermoelectric generator (RTG) production for power sources in deep space exploration, Oak Ridge National Laboratory (ORNL) produces plutonium-238 ( 238 Pu). To produce 238 Pu, neptunium-237 ( 237 Np) targets are fabricated at ORNL and subsequently irradiated at the High Flux Isotope Reactor (HFIR) at ORNL and the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL). Specifically, current flowsheets utilize neptunium dioxide ( 237 NpO 2 ) targets. Aluminum (Al) powder is blended with 237 NpO 2 target material to improve thermal conductivity during irradiation. The current composition of 237 NpO 2 /Al pellets (i.e., cermets, or ceramic–metallics) is 20% 237 NpO 2 , 70% Al, and 10% void space. Al powders utilized by the 238 Pu program are high-fired under vacuum before blending into targets. The primary objective of this work is to measure the physical, chemical, and thermal properties of Al before and after the high-firing process. Properties of interest include the morphology, surface texture, particle size, crystal phase(s), and thermal conductivity of the material. These properties are measured with existing materials characterization equipment at ORNL, including powder x-ray diffraction (pXRD), scanning electron microscopy (SEM) with energy-dispersive spectroscopy (EDS), laser flash analysis (LFA), and thermogravimetric analysis (TGA). A secondary objective of this work is to compare the Al powders before and after the high-firing procedure to determine the effects of high-firing on chemical, physical, and thermal properties and to determine the efficacy of the high-firing process.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Plutonium-238 Loadout Calorimeter Return To Service
The calorimeter in the transfer area in Building 7920 at the US Department of Energy’s Oak Ridge National Laboratory is used to measure the amount of 238 Pu in the Plutonium Heat Source Oxide. The calorimetry measurement is taken after the oxide is packaged in an ORISC (Oak Ridge Inner Shipping Capsule)/FSO (Fuel Storage Outer) assembly before loading into the Containment Vessel and shipping container. The equipment is used in three specific configurations: zero measurement (nothing in the sample cup), FSO measurement (actual measurement of 238 Pu), and reference calibration measurement (using the reference FSO as a known heat source). System checks were performed in July 2023 in preparation for scheduled material loadout. During these checks, personnel discovered that the reference FSO had experienced an electrical short in the heater cable and was no longer functional. The calorimeter was in the reference calibration measurement configuration at this time. Facility management was notified when the damage was discovered. The data from the Yokogawa recorder were pulled and analyzed for a span of time between September 2022 and July 2023. An unusual spike was found in the sample cup temperature data that started on October 19, 2022, and ended on October 20, 2022. The sample cup reached a temperature of 191.1°C. The maximum allowable temperature for the calorimeter thermopile to reach is 220°C based on the manufacturer statement provided in Appendix B of this report [1]. The calorimeter thermopile and the sample cup thermocouple are physically close to each other; therefore, the data suggest that the calorimeter itself never saw a temperature in excess of 191.1°C. Physical damage present on the cable, tape, and insulation suggests that the temperature reached a higher value in some locations within the sample cup than the data shows. Because of this discrepancy, testing of the calorimeter was required to confirm that the calorimeter is functioning the same as it was before the electrical short. The intent of this report is to assess the functionality of the calorimeter and determine if it is acceptable to use for 238 Pu loadout material measurement. Testing showed that the calorimeter is functionally equivalent to the initial calibration that was performed in the summer of 2021, and thus, the calorimeter was cleared to be used for its intended purposes.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗